This little candle ornament brings a warm, quiet glow to the tree. A cream candle with a knit-look texture stands tall above a fan of sage-green leaves. A mustard flame sits on top, with a smaller inner flame layered over it, and three round mustard berries sit at the base.
The palette is soft and classic: cream, mustard, and sage green. The style is cozy and Scandinavian-inspired. The texture does the work, so you don’t need any extra embellishment. The pattern uses US crochet terms throughout.
The finished ornament measures about 5.5 in (14.0 cm) wide and 6.25 in (15.9 cm) tall without the loop, or 7.75 in (19.7 cm) tall including the loop. The candle body alone is 2 in (5.1 cm) wide and 4.5 in (11.4 cm) tall after its border.
The candle body is worked sideways in rows of half double crochet in the third loop, so the knit-look V columns run vertically. Then you add a single round of single crochet as a border. The flame, inner flame, leaves, and berries are worked separately and sewn on. Finally, a slip-stitch cord makes the hanging loop.
Finished Size and Construction
- Finished size: 5.5 in (14.0 cm) wide × 6.25 in (15.9 cm) tall, plus a 1.5 in (3.8 cm) loop
- Skill level: Easy to intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (#4)
- Hook: 4.0 mm (G-6)
- Number of pieces: One finished ornament, assembled from 13 small components (1 candle body, 1 outer flame, 1 inner flame, 6 leaves, 3 berries, 1 loop)
- Layout: Leaves behind the candle base, berries in front of it, flame behind the candle top, inner flame on top of the outer flame
- Candle body before border: 4 in (10.2 cm) tall × 1.5 in (3.8 cm) wide
- Border depth: 0.25 in (0.6 cm) on every side
- Candle body after border: 4.5 in (11.4 cm) × 2 in (5.1 cm)
Materials
Choose a smooth worsted-weight yarn so the stitch texture stays crisp. Cotton gives the sharpest definition. Acrylic or a wool blend gives a softer, slightly puffier ornament. Avoid fuzzy or highly variegated yarns, because they hide the V columns.
- Cream: 12 g / 22 m (candle body, border, hanging loop)
- Mustard yellow: 6 g / 11 m (outer flame, inner flame, three berries)
- Sage green: 5 g / 9 m (six leaves)
All quantities include a margin of about 25% for swatching and sewing tails.
Tools:
- 4.0 mm (G-6) crochet hook
- Tapestry needle
- Scissors
- Stitch markers (2)
- Ruler or tape measure
- Rust-proof pins and a blocking mat or folded towel
- Spray bottle with water
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sc2tog – single crochet 2 together
- MR – magic ring
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
Special stitch – hdc in third loop (camel stitch): Each hdc has a third loop lying horizontally just below the two top loops on the side facing away from you. Yarn over, insert your hook only under this third loop, then complete the hdc as usual. This pushes the two top loops forward and forms a knit-look V on the RS. Every two rows make one V column.
Gauge and Checkpoints
Gauge in hdc worked in the third loop: 21 sts = 4 in (10.2 cm) and 8 rows = 1.5 in (3.8 cm).
Make the candle body first and treat it as your gauge test. Since this ornament is only one candle, the body tells you everything you need to know before you start the smaller parts.
Checkpoints:
- After Row 1: The strip of 21 hdc measures 4 in (10.2 cm) long.
- After Row 8: The body measures 4 in (10.2 cm) × 1.5 in (3.8 cm).
- After the border: The candle measures 4.5 in (11.4 cm) × 2 in (5.1 cm).
- Flame: About 1.25 in (3.2 cm) wide × 1.75 in (4.4 cm) tall.
- Each leaf: About 1.75 in (4.4 cm) long × 0.6 in (1.5 cm) wide.
Too big? Go down a half size to 3.75 mm. Too small? Go up to 4.5 mm. Change hooks rather than stitch counts, because the border math depends on 21 sts and 8 rows.

Candle Body (Cream)
The body is worked sideways, so the foundation chain runs the full height of the candle.
Ch 23.
Row 1 (RS): Hdc in 3rd ch from hook and in each ch across. Turn. (21 hdc)
Row 2: Ch 1 (does not count as a st), hdc in third loop of each st across. Turn. (21 hdc)
Rows 3–8: Repeat Row 2. (21 hdc in each row)
At the end of Row 8, do not fasten off. Continue straight into the border.
Checkpoint: the body measures 4 in (10.2 cm) along its long edges and 1.5 in (3.8 cm) across. You should see 4 vertical V columns on the RS. Mark the RS with a stitch marker.
Flame (Mustard)
Outer flame:
Ch 8.
Rnd 1: Working into the chain, sc in 2nd ch from hook, hdc in next ch, dc in next 4 ch, 6 dc in last ch. Rotate to work along the opposite side of the foundation chain: dc in next 4 ch, hdc in next ch, sc in last ch, ch 2. Join with sl st to first sc. (18 sts + ch-2 tip)
Rnd 2 (trim round): Ch 1, sc in first 6 sts, 2 sc in each of next 6 dc, sc in next 6 sts, (sc, ch 2, sc) in ch-2 sp. Join with sl st to first sc. (18 sc worked 1-per-stitch + 6 increases + 2 sc in tip sp = 26 sc + ch-2 tip)
Fasten off, leaving a 10 in (25.4 cm) tail. The flame measures 1.25 in (3.2 cm) × 1.75 in (4.4 cm). The rounded end is the bottom and the ch-2 is the pointed tip.
Inner flame:
Ch 5.
Rnd 1: Sc in 2nd ch from hook, hdc in next ch, dc in next ch, 5 dc in last ch. Working along the opposite side: dc in next ch, hdc in next ch, sc in last ch, ch 2. Join with sl st to first sc. (11 sts + ch-2 tip)
Fasten off, leaving an 8 in (20.3 cm) tail. The inner flame measures about 0.6 in (1.5 cm) × 1 in (2.5 cm).
Leaves (Sage Green, Make 6)
Each leaf is worked around a chain, so the stitches lean out from a center vein. This gives the ridged, chevron-like texture.
Ch 10.
Rnd 1: Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in next 4 ch, hdc in next ch, (sc, ch 1, sc) in last ch. Working along the opposite side: hdc in next ch, dc in next 4 ch, hdc in next ch, sc in next ch, sl st in last ch, ch 2. Join with sl st to first sl st. (18 sts + ch-1 at base + ch-2 tip)
Fasten off, leaving an 8 in (20.3 cm) tail at the base end. Each leaf measures 1.75 in (4.4 cm) × 0.6 in (1.5 cm). The ch-2 makes the pointed outer tip, and the ch-1 end is the base that tucks behind the candle.
Berries (Mustard, Make 3)
Rnd 1: 6 sc in MR. Pull the ring closed. (6 sc)
Rnd 2: 2 sc in each st around. (12 sc)
Rnd 3: Sc in each st around. (12 sc)
Rnd 4: Sc2tog 6 times. (6 sc)
Tuck the starting tail inside as stuffing. Fasten off, leaving a 6 in (15.2 cm) tail. Thread the tail through the front loops of the last 6 sts and pull tight. Each berry is about 0.5 in (1.3 cm) across.
Hanging Loop (Cream)
Ch 16.
Row 1: Sl st in 2nd ch from hook and in each ch across. (15 sl st)
Fasten off, leaving 6 in (15.2 cm) tails at both ends. The cord is about 3 in (7.6 cm) long. Folded in half, it makes a 1.5 in (3.8 cm) loop.
Border (Candle Body, Cream)
Border gauge: The border sc matches the body gauge, at about 5.25 sts per inch (2.1 per cm).
Continue from the last st of Row 8, with the RS facing.
Rnd 1: Ch 1. Along the top long edge: 3 sc in first st (corner), sc in next 19 sts, 3 sc in last st (corner). Along the short edge: sc once in the end of each of the 8 rows. Along the foundation chain: 3 sc in first ch (corner), sc in next 19 ch, 3 sc in last ch (corner). Along the second short edge: sc once in the end of each of the 8 rows. Join with sl st to first sc. (66 sc)
Per-side counts, including both corner center sts:
- Each long side: 1 corner + 1 + 19 + 1 + 1 corner = 23 sts
- Each short side: 1 corner + 1 + 8 + 1 + 1 corner = 12 sts
- Check: (2 × 23) + (2 × 12) − 4 shared corners = 66 sc
Fasten off, leaving a 12 in (30.5 cm) tail for sewing.
Why the math works: The long sides have 21 sts over 4 in (10.2 cm), or 5.25 per inch. The short sides have 8 row ends over 1.5 in (3.8 cm), or 5.33 per inch. Because these rates are nearly equal, one sc per stitch and one sc per row end keeps both edges flat. The 3-sc corners turn each corner cleanly. One round of sc adds 0.25 in (0.6 cm) on every side. That takes the body from 4 in × 1.5 in (10.2 cm × 3.8 cm) to 4.5 in × 2 in (11.4 cm × 5.1 cm).
Assembly
Lay out all the parts on a flat surface with the candle RS up. Pin each part before sewing, and use matching yarn tails.
- Inner flame onto outer flame: Center the inner flame on the outer flame with both tips pointing up. Leave 0.25 in (0.6 cm) of the outer flame showing at the bottom. Whipstitch around the inner flame’s edge.
- Flame behind candle: Slide the rounded base of the outer flame 0.25 in (0.6 cm) behind the top border of the candle, centered. Sew from the back.
- Leaves: Tuck 0.25 in (0.6 cm) of each leaf base behind the candle’s bottom corners, three on each side. Angle the upper leaf about 40° upward, the middle leaf about 10° below horizontal, and the lower leaf about 35° downward. Sew each leaf base to the back of the candle.
- Berries: Sew one berry centered on the candle’s bottom border. Sew two more just below it, touching each other and slightly overlapping the leaf bases, to form a triangle.
- Loop: Fold the cord in half. Sew both ends to the back of the flame, 0.25 in (0.6 cm) below the tip, so that 1.5 in (3.8 cm) of loop stands above the point.
Weave in all ends on the back.
Final Blocking
- Lay the ornament RS up on a blocking mat or folded towel.
- Mist it lightly with water until it is damp but not soaked.
- Pin the candle into a 2 in × 4.5 in (5.1 cm × 11.4 cm) rectangle, with a pin at each corner.
- Pin the flame to a point and each leaf tip into its final angle.
- Leave the berries unpinned so they stay round.
- Let it dry completely, which takes about 4–6 hours.
- Unpin it and check the overall size: 5.5 in (14.0 cm) × 6.25 in (15.9 cm).
Final Quality-Control Checklist
- [ ] Candle body has 21 sts × 8 rows and shows 4 V columns
- [ ] Border has 66 sc: 23 per long side and 12 per short side, corners included
- [ ] Candle measures 2 in × 4.5 in (5.1 cm × 11.4 cm)
- [ ] Outer flame has 26 sc plus a ch-2 tip, and the inner flame has 11 sts plus a ch-2 tip
- [ ] All six leaves are the same length, 1.75 in (4.4 cm)
- [ ] Berries are firm, round, and evenly sized
- [ ] Leaves fan symmetrically, three per side
- [ ] Loop is centered above the flame tip
- [ ] No tails are visible on the front
Troubleshooting
Candle curls along the long edges: Your third-loop hdc is too tight. Go up a hook size, or block it firmly while damp.
V columns are hard to see: Make sure you are working in the third loop, not the back loop. The third loop sits below the top two loops.
Border ruffles on the short sides: Work exactly 8 sc per short side. Don’t add extra sts at row ends.
Border pulls in at the corners: Check that you worked 3 sc in each corner st.
Flame looks blunt: Make sure the ch-2 tip is there in both rounds, and pin the point while blocking.
Leaves twist: Block them flat. Also check that both sides of the leaf mirror each other in st count, 8 sts per side.
Berries look flat: Add a small pinch of yarn scraps before you close Rnd 4.
Care
Hand wash in cool water, press out excess water in a towel, and dry flat. Re-shape the flame and leaves while the ornament is damp, and store it flat or hanging.

Final Notes
The measurement chain is simple. The 21-st, 8-row candle body measures 4 in × 1.5 in (10.2 cm × 3.8 cm). The 66-sc border takes it to 4.5 in × 2 in (11.4 cm × 5.1 cm). The flame and leaves extend the ornament to 5.5 in × 6.25 in (14.0 cm × 15.9 cm), and the cord adds a 1.5 in (3.8 cm) loop on top. If the candle body hits gauge, everything else falls into place. Make one, then make a few more for the whole tree.
Happy crocheting!