The Seaglass Shell Lace Curtain is an airy tab-top panel made from rows of upright fan shells. Each fan has nine spokes and a crown of small chain loops. An open diamond net links the fans into tidy vertical columns, so daylight shows through every gap.
The bands alternate dusty sage and soft cream, starting and ending with sage. A cream scalloped hem finishes the bottom edge, and sage tab loops at the top hang straight onto a curtain rod. The look is coastal and calm, a bit vintage, and works well in a bright living room or bedroom.
This pattern uses US crochet terms. Each finished panel measures 28.5 in (72.4 cm) wide by 79 in (200.7 cm) long, plus tab loops about 2.25 in (5.7 cm) tall. The photo shows a matching pair, so the instructions are for one panel, made twice.
Each panel is worked bottom-up in one piece. You start with a foundation chain and one net row, then work 19 three-row fan bands. One border round goes all the way around, then you add a shell hem, a header row and nine tabs.
Finished Size and Construction
- Finished panel size: 28.5 in x 79 in (72.4 cm x 200.7 cm), not counting the tabs
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (#4) cotton or cotton blend
- Hook: 5.5 mm (I-9)
- Number of pieces: 2 panels, each worked in one piece
- Layout: One panel on each side of the window, not joined
- Fan repeat size: 4 in (10.2 cm) wide x 4 in (10.2 cm) tall per band
- Size before border: 28 in x 77 in (71.1 cm x 195.6 cm)
- Border depth: 0.25 in (0.6 cm) on each long side; 1 in (2.5 cm) at the top and at the bottom
Materials
Pick a smooth, slightly mercerized worsted cotton or cotton blend. It shows off the fan spokes and blocks crisply. Avoid fuzzy yarns, because they blur the lace. The amounts below assume about 170 m per 100 g.
- Sage green: 250 g (425 m) per panel; 500 g (850 m) for the pair
- Cream: 200 g (340 m) per panel; 400 g (680 m) for the pair
These amounts include a margin of about 15% for the gauge swatch and small differences in tension.
Tools:
– 5.5 mm (I-9) crochet hook
– Tapestry needle
– Scissors
– Stitch markers
– Tape measure
– Blocking mats and rustproof pins (or a clean carpet and a sheet)
– Spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- tr – treble crochet
- dtr – double treble crochet
- sk – skip
- sp(s) – space(s)
- rep – repeat
- RS / WS – right side / wrong side
Special stitch – Fan: In one stitch, work (tr, ch 1) 8 times, then work 1 more tr in the same stitch. That gives 9 tr and 8 ch-1 sps.
Gauge and Checkpoints
Make a test swatch before you start a full panel. A small change in gauge adds up quickly over 19 bands.
Swatch: Ch 26. Work Row 1, then Rows 2–7 (two full bands), following the pattern below. The swatch has 2 fans across.
Gauge, after blocking: 2 fans = 8 in (20.3 cm) wide; Row 1 plus 2 bands = 9 in (22.9 cm) tall. One band (3 rows) = 4 in (10.2 cm).
If your swatch is too big, go down to a 5.0 mm (H-8) hook. If it’s too small, go up to a 6.0 mm (J-10) hook. Check width first: the lattice stretches lengthwise, but the width is fixed by the fan count.
Panel checkpoints (blocked or gently stretched):
– After Row 1: 28 in (71.1 cm) wide
– After Band 5 (Row 16): 21 in (53.3 cm) long
– After Band 10 (Row 31): 41 in (104.1 cm) long
– After Band 15 (Row 46): 61 in (154.9 cm) long
– After Band 19 (Row 58): 77 in (195.6 cm) long

Panel Pattern
The panel is 7 fans wide. Each band is 3 rows: a Fan row, a Crown row and a Net row. Odd-numbered bands (1, 3, 5 … 19) are sage, and even-numbered bands (2, 4 … 18) are cream.
Color changes: Work the last sc of each Net row with the color of the next band. Carry no strands; fasten off the old color with a 6 in (15.2 cm) tail.
Foundation and Row 1 (Base Net, Sage)
With sage, ch 86.
Row 1: Sc in 2nd ch from hook. Ch 5, sk 5 ch, sc in next ch; rep from * 13 more times. Turn.
(15 sc, 14 ch-5 sps.)* This uses all 85 working chains: 1 + (14 x 6) = 85.
Band 1 (Rows 2–4, Sage)
Row 2 (Fan row): Ch 1, sc in first sc. Ch 2, sk ch-5 sp, Fan in next sc, ch 2, sk next ch-5 sp, sc in next sc; rep from * 6 more times. Turn.
(7 Fans: 63 tr and 56 ch-1 sps; 8 sc; 14 ch-2 sps.)*
The fans sit in the 2nd, 4th, 6th … 14th sc. The 8 sc between and at the ends of the fans anchor them.
Row 3 (Crown row): Ch 7 (counts as dtr + ch 2). Sk ch-2 sp, sc in first ch-1 sp of Fan, (ch 3, sc in next ch-1 sp) 7 times, ch 2, sk ch-2 sp, dtr in next sc; rep from * 6 more times, working the last dtr in the last sc. Turn.
(8 dtr including the turning chain; 56 sc; 49 ch-3 loops; 14 ch-2 sps.)*
The 7 ch-3 loops on each fan make the lacy crown. The dtr posts bring the fan gaps up level with the fan tops.
Row 4 (Net row): Ch 1, sc in first dtr. Ch 5, sc in the 4th (center) ch-3 loop of the next Fan, ch 5, sc in next dtr; rep from , working the last sc in the 5th ch of the turning ch-7. Turn.
(15 sc, 14 ch-5 sps.) Work the last sc with cream.
The Net row has the same count as Row 1. Each fan-center sc is where the next fan goes, so the fans stack in straight columns. The ch-5 lines make the diamond lattice.
Bands 2–19 (Rows 5–58)
Repeat Rows 2–4 for each band. Here is how the rows line up:
- Band 2 (cream): Rows 5–7
- Band 3 (sage): Rows 8–10
- Band k: Fan row = Row 3k − 1, Crown row = Row 3k, Net row = Row 3k + 1
- Band 19 (sage): Rows 56–58
Counts after each row type stay the same every time:
– Fan row: 7 Fans, 8 sc
– Crown row: 8 dtr, 56 sc, 49 ch-3 loops
– Net row: 15 sc, 14 ch-5 sps
When you reach Row 58, don’t change color and don’t fasten off. Go straight on to the border in sage.
Make All Pieces
Make 2 identical panels.
| Per panel | Sage | Cream |
|---|---|---|
| Base net (Row 1) | 1 row | – |
| Fan bands | 10 bands (1, 3 … 19) | 9 bands (2, 4 … 18) |
| Border | Rnd 1, header, 9 tabs | Shell hem |
Layout (as hung, front view):
[ Panel A ] [ window ] [ Panel B ]
7 fans x 19 bands 7 fans x 19 bands
The panels are not joined. Each one hangs on its own from the rod.
Border
Border gauge: about 3 sc = 1 in (2.5 cm) along every edge. That works out to 12 sc per 4 in (10.2 cm) band.
How the count is defined: The corners are ch-2 sps, not stitches. Every count below is the number of sc along that side only, with no corner stitches included or added.
Rnd 1 (sage): Ch 1, turn so the RS is facing.
- Top edge: Sc in first sc, 5 sc in ch-5 sp, sc in next sc; rep from * across = 85 sc* (15 sc + 14 x 5). Ch 2 for the corner.
- First long side: Work down the row-ends. For each band, work 3 sc in the side of the Net row, 5 sc around the dtr post of the Crown row and 4 sc in the side of the Fan row. That’s 12 sc per band, so 19 bands = 228 sc. Then work 3 sc down the side of Row 1 and the foundation = 231 sc. Ch 2.
- Bottom edge: Work 1 sc into each of the 85 working foundation chains, skipping the very first chain = 85 sc. Ch 2.
- Second long side: Work up the row-ends as before, in reverse order = 231 sc. Ch 2.
- Sl st to first sc. Fasten off.
(Total: 632 sc + 4 corner ch-2 sps.)
Hem row (cream, bottom edge only): With the RS facing, join cream in the first sc of the bottom edge. Ch 1, sc in the same sc. Sk 2 sc, 5 dc in next sc, sk 2 sc, sc in next sc; rep from * 13 more times. Fasten off.
(14 shells, 15 sc: 1 + 14 x 6 = 85.)*
That’s 2 scallops under each fan column. The hem is about 0.75 in (1.9 cm) deep.
Header row (sage, top edge only): With the RS facing, join sage in the first sc of the top edge. Ch 3 (counts as dc), then dc in each remaining sc across = 85 dc. Don’t turn and don’t fasten off yet if you are going to start tab 1 here.
Tabs (sage, 9 tabs):
– Row 1: Starting in dc 1, ch 1, sc in the same dc and the next 4 dc = 5 sc.
– Rows 2–18: Ch 1, turn, sc in each sc = 5 sc.
– Fasten off, leaving a 12 in (30.5 cm) tail.
– Sk 5 dc, join sage in the next dc and repeat.
The tabs start in dc 1, 11, 21, 31, 41, 51, 61, 71 and 81. Tab 9 ends exactly on dc 85, so there’s a tab at each edge with 8 gaps of 5 dc between: (9 x 5) + (8 x 5) = 85.
Fold each tab to the WS and whipstitch its last row to the base of the header row. Each tab is about 4.5 in (11.4 cm) long and 1.5 in (3.8 cm) wide. Folded, it makes a loop about 2.25 in (5.7 cm) tall that fits a rod up to 1.25 in (3.2 cm) across.
Why the math works:
– Horizontal: The top and bottom edges both come to 85 sts, which equals the 85 working foundation chains (12 x 7 + 1). This number splits evenly into 14 shells of 6 plus 1, and into 9 tabs and 8 gaps of 5 each, so nothing needs fudging.
– Vertical: 12 sc per 4 in (10.2 cm) band matches the 3 sc per inch border gauge. The 231 sc on each long side cover 77 in (195.6 cm) with no ruffling.
– Final size: The sides add 0.25 in (0.6 cm) each, for a width of 28.5 in (72.4 cm). The top and bottom add 1 in (2.5 cm) each, for a length of 79 in (200.7 cm).
Final Blocking
- Weave in all ends along the dtr posts and the sc edges, where they hide best.
- Lay the panel flat on mats or a sheet-covered carpet, RS up.
- Spritz it evenly until it’s damp, but not soaked.
- Pin the long sides straight to 79 in (200.7 cm), then pin the top and bottom to 28.5 in (72.4 cm).
- Open each fan: pin the crown loops into a smooth arc, about 4 in (10.2 cm) wide.
- Pull each ch-5 diamond square and pin the point of each hem shell.
- Let it dry completely before you unpin it, then block the second panel to match.
Final Quality-Control Checklist
- 7 fans across every band, stacked in straight columns
- 19 bands, alternating sage and cream, with sage at the top and bottom
- Every fan has 9 tr and 7 crown loops
- 231 sc on each long side, 85 sc on the top and bottom edges
- 14 cream hem shells and 9 evenly spaced tabs
- Both panels block to 28.5 in x 79 in (72.4 cm x 200.7 cm)
- No color tails showing on the RS
Troubleshooting
- The panel is narrowing: Count the ch-5s in the Net row. There should be 14. The usual cause is a missed sc in the turning ch-7.
- The fans are drifting out of their columns: Make sure each fan goes in the even-numbered sc (2nd, 4th …), which is the one sitting in the center crown loop.
- The edges ripple: Rework Rnd 1 with 11 sc per band. If the edges pull tight instead, use 13 sc per band. Use the same count on both sides.
- The panel is too long: Leave out one sage/cream pair of bands (6 rows), which takes off about 8 in (20.3 cm). Always end on a sage band.
- The tabs twist: Fold each tab to the WS and sew it flat before you hang the panel.
Care
Hand wash in cool water with mild soap, press the water out in a towel and dry flat, reshaping the fans. Don’t hang the panels wet, because the lace will stretch.

Final Notes
The measurements build on each other. Your swatch sets each fan at 4 in (10.2 cm) and each band at 4 in (10.2 cm). Seven fans give a body width of 28 in (71.1 cm). Row 1 plus 19 bands make 77 in (195.6 cm). The border brings each panel to 28.5 in x 79 in (72.4 cm x 200.7 cm), with tab loops on top. If you check the swatch and each checkpoint, both panels will come out matching.
Happy crocheting!