Blossom Initial V Keychain Crochet Pattern

This little letter V keychain is soft and plump, and it’s finished with a tiny spring bouquet. The letter is worked in periwinkle blue, then decorated with a cream flower, a pink flower, four pink buds and four green leaves. A gold keyring and a small blue heart charm complete the look.

The style is sweet and tidy: tight single crochet, smooth rounded ends and flat appliqués that sit close to the surface. It makes a lovely personalized gift or bag charm, and it’s a quick way to use up cotton scraps.

This pattern uses US crochet terms. The finished letter measures about 3.5 in (8.9 cm) tall, 3 in (7.6 cm) wide and 0.75 in (1.9 cm) thick.

Construction is simple. You work each arm of the V from its rounded top down as a tube. Then you join both arms in one round and continue into the base, decreasing to close. Finally, you crochet the flowers, buds, leaves and heart, sew everything on and add the hardware.

Finished Size and Construction

  • Finished size: 3.5 in (8.9 cm) tall x 3 in (7.6 cm) wide x 0.75 in (1.9 cm) thick
  • Skill level: Advanced beginner
  • Terminology: US crochet terms
  • Yarn weight: Sport weight (2) cotton or cotton blend
  • Hook: 2.5 mm (US B/1 or C/2)
  • Number of pieces: 1 letter body, plus 2 flowers, 4 buds, 4 leaves and 1 heart charm
  • Layout: Single letter, with appliqués on the front face only
  • Arm size: about 1.2 in (3.0 cm) wide when stuffed and 2.6 in (6.6 cm) long before joining
  • Size before border: same as finished size (no border is added)
  • Border depth: 0 in (0 cm). The edges are the seamless rounded sides of the tube.

Materials

Choose a smooth, firmly plied cotton or milk cotton in sport weight. Tight stitches matter here, because stuffing shows through loose fabric. Avoid fuzzy yarns, which blur the small petals.

  • Periwinkle blue: 12 g, about 30 m (letter and heart)
  • Cream: 2 g, about 5 m (first flower)
  • Pink: 3 g, about 8 m (second flower and buds)
  • Green: 3 g, about 8 m (leaves and bud tips)
  • Yellow: 1 g, about 3 m (flower centers)

These amounts include a margin of roughly 20 percent for testing gauge, tails and sewing.

Tools:

  • 2.5 mm crochet hook
  • Polyester fiberfill, about 5 g
  • Stitch marker
  • Tapestry needle
  • Gold split keyring with a 2 in (5.1 cm) chain
  • 2 small gold jump rings, about 0.25 in (0.6 cm)
  • 2 pairs of flat-nose pliers
  • Scissors and pins

Abbreviations (US Terms)

  • MR – magic ring
  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sc2tog – single crochet 2 together. An invisible decrease is recommended: insert the hook in the front loops only of the next 2 sts, yarn over, pull through both front loops, yarn over, pull through 2 loops.
  • st(s) – stitch(es)
  • rnd – round

Special stitch – petal: (hdc, 2 dc, hdc) all in the same stitch.

Work all body rounds in a continuous spiral. Don’t join or turn. Move your marker up to the first stitch of every round.

Gauge and Checkpoints

Gauge: 6 sc and 6.5 rnds = 1 in (2.5 cm) in continuous rounds.

Make one arm first. It’s the best gauge swatch because it’s exactly the fabric you need.

  • After Rnd 3: the disk measures about 0.9 in (2.3 cm) across.
  • After Rnd 10: the arm is about 1.5 in (3.8 cm) long.
  • After Rnd 17: the arm is about 2.6 in (6.6 cm) long and about 1.5 in (3.8 cm) wide when pressed flat.

If your arm is too big, go down to a 2.25 mm hook. If it’s too small, go up to a 2.75 mm hook. Don’t go larger than that, because the fabric must stay dense enough to hide the stuffing. Don’t change the stitch counts to fix the size, because the join and base math depend on them.

Crocheted pink flower with yellow center and green leaves, embellished on a blue crochet pouch with gold charm detail.

Letter Body

Arm 1

With blue, make a MR.

  • Rnd 1: 6 sc in MR. (6 sts)
  • Rnd 2: inc in each st around. (12 sts)
  • Rnd 3: [sc 1, inc] 6 times. (18 sts)
  • Rnds 4–17: sc in each st around. (18 sts in each of 14 rnds)

Sl st in the next st and fasten off. Weave in the starting tail only. Stuff the rounded top lightly.

Arm 2

Work Rnds 1–17 exactly as for Arm 1, but don’t fasten off. Stuff the rounded top lightly.

Checkpoint: both arms are 2.6 in (6.6 cm) long and have 18 sts each.

Joining Round and Base

Hold the arms side by side with the open ends up and the rounded tops angled apart like a V. On each arm, find the 3 sts that face the other arm. These 3 + 3 inner sts stay unworked and become the inner point of the V.

  • Rnd 18 (joining round): On Arm 2, sc in the next 15 sts, leaving the 3 inner sts unworked. Move to Arm 1 and sc in the first st after its 3 inner sts. Then sc in the next 14 sts of Arm 1, ending just before its 3 inner sts. Continue into the first sc of Arm 2. (15 + 15 = 30 sts)
  • Rnd 19: sc in each st around. (30 sts)

Checkpoint: pressed flat, the base is about 2.5 in (6.4 cm) wide.

  • Rnd 20: [sc 3, sc2tog] 6 times. (24 sts)
  • Rnd 21: [sc 2, sc2tog] 6 times. (18 sts)

Now stuff the arms fully, pushing the stuffing up into each arm through the base opening. Aim for firm but not round: each arm should sit as a soft oval about 1.2 in (3.0 cm) wide.

  • Rnd 22: [sc 1, sc2tog] 6 times. (12 sts)

Add a little more stuffing to the base.

  • Rnd 23: sc2tog 6 times. (6 sts)

Fasten off, leaving a 6 in (15.2 cm) tail. Thread it through the front loops of the last 6 sts, pull closed and weave in.

Closing the Inner Point

Thread a 12 in (30.5 cm) length of blue yarn on your needle. Push a pinch of stuffing into the inner gap. Whipstitch the 3 unworked sts of Arm 1 to the 3 unworked sts of Arm 2, one stitch to one stitch. Pull snug so the seam disappears into the crease of the V.

Press the letter between your palms so the arms and base flatten into a front face and a back face. The joining round should sit along the outer sides, not on the front.

Checkpoint: the letter is 3.5 in (8.9 cm) tall and 3 in (7.6 cm) wide at the top, with about 0.6 in (1.5 cm) of space between the arm tops.

Appliqués

Leave an 8 in (20.3 cm) tail on every appliqué for sewing.

Cream Flower (make 1)

  • Rnd 1: With yellow, 10 sc in MR. Join with sl st to the first sc. Fasten off yellow. (10 sts)
  • Rnd 2: Join cream in any st. [Petal in next st, sl st in next st] 5 times. (5 petals)

Fasten off. The flower measures about 1 in (2.5 cm) across.

Pink Flower (make 1)

Work exactly as for the cream flower, using pink for Rnd 2. (10 sts in Rnd 1, 5 petals in Rnd 2)

Buds (make 4)

  • Rnd 1: With pink, 6 sc in MR. (6 sts)
  • Rnd 2: sc in each st around. (6 sts)
  • Rnd 3: Change to green. sc2tog 3 times. (3 sts)

Fasten off green, leaving a long tail. Tuck the pink tail inside as stuffing. Each bud is about 0.35 in (0.9 cm) tall, pink on top with a green tip at the base.

Leaves (make 4)

With green, ch 7.

  • Row 1: Starting in the 2nd ch from the hook: sl st, sc, hdc, dc, hdc, then sc in the last ch. Ch 1 and rotate. Working along the other side of the foundation chain: sc, hdc, dc, hdc, sc, sl st. (12 sts)

Fasten off. Each leaf is a pointed oval about 0.8 in (2.0 cm) long.

Heart Charm (make 1)

Lobe A: With blue, 6 sc in MR (6 sts). Rnd 2: sc in each st around (6 sts). Fasten off.

Lobe B: Work as for Lobe A, but don’t fasten off.

  • Rnd 3 (join): sc in 5 sts of Lobe B, leaving 1 inner st unworked. Then sc in 5 sts of Lobe A, leaving 1 inner st unworked. (5 + 5 = 10 sts)
  • Rnd 4: [sc 3, sc2tog] 2 times. (8 sts)

Stuff lightly.

  • Rnd 5: [sc 2, sc2tog] 2 times. (6 sts)
  • Rnd 6: sc2tog 3 times. (3 sts)

Close the opening, then sew the 2 unworked inner sts together. The heart is about 0.75 in (1.9 cm) wide and 0.7 in (1.8 cm) tall. Sew a short blue loop at the top center to hold the jump ring.

Assembly

Lay the letter flat with the front face up. Pin everything before you sew a single stitch.

  1. Leaves first. Place one leaf pointing up and left along the outer edge of the left arm, about 0.4 in (1.0 cm) below the top. Place a second leaf pointing left on the outer edge of the base. Place the third and fourth leaves pointing right and down beside the lower right of the base.
  2. Cream flower. Center it on the left arm about 1.2 in (3.0 cm) below the top, overlapping the base of the first leaf.
  3. Pink flower. Place it over the left half of the base, slightly lower and to the right of the cream flower. Its petals should touch or slightly overlap the cream flower.
  4. Buds. Stack two buds above the cream flower, one above the other. Place the other two to the right of the pink flower, with one slightly higher.
  5. Stems. With green, embroider a short straight stitch about 0.3 in (0.8 cm) long under each bud, running toward the nearest leaf or flower.

Sew each piece on with small whipstitches through its outer edge only, catching one strand of the letter’s surface. Also sew around the yellow center of each flower so the petals stay flat. Keep the tension light so the letter doesn’t pucker.

Hardware: Open a jump ring with two pairs of pliers. Pass it through 2 sc at the top of the left arm, slightly toward the inner corner, and hook it to the last link of the chain. Close it fully. Attach the heart’s loop to the split ring with the second jump ring so the heart hangs beside the letter.

Border

This keychain has no added border, and it doesn’t need one. The outline is the side of a seamless tube, so it’s already smooth and rounded.

The edge gauge is the same as the body gauge: 6 sc per 1 in (2.5 cm). Each arm is 18 sts around, so each flattened face shows 9 sts, or 1.5 in (3.8 cm) of fabric. Light stuffing rounds that into the 1.2 in (3.0 cm) arm width. The base is 30 sts around, which gives 15 sts per face, or 2.5 in (6.4 cm), before the decreases taper it.

A slip-stitch outline on the surface would stiffen the letter and hide its soft rounded edge, so leave it off.

Final Blocking

  1. Lightly mist the finished letter with water. Don’t soak the stuffing.
  2. Press the letter gently between your palms to set the flat front and back faces.
  3. Pinch the inner point of the V into a crisp crease.
  4. Shape each petal and leaf with your fingertip so it lies flat.
  5. Lay the keychain face up on a towel and check the size: 3.5 in (8.9 cm) by 3 in (7.6 cm).
  6. Let it dry completely before you attach it to keys or a bag.

Final Quality-Control Checklist

  • Arm 1 and Arm 2 each have 18 sts and 17 rnds.
  • The joining round has 30 sts, with 3 inner sts left unworked on each arm.
  • The inner point seam is closed, with no stuffing showing.
  • The letter measures 3.5 in (8.9 cm) tall and 3 in (7.6 cm) wide.
  • Both flowers have 5 even petals and a yellow center.
  • There are 4 buds and 4 leaves, all sewn flat.
  • No yarn tails show on the back.
  • Both jump rings are fully closed, with no gap.

Troubleshooting

Stuffing shows through the stitches. Go down a hook size, or wrap the yarn under the hook instead of over it for your sc.

The arms look round instead of oval. Remove a little stuffing and press the letter flat again.

There’s a hole at the inner point. Add one more whipstitch across the gap.

The V looks crooked. Recount Rnd 18. Each arm must give exactly 15 sts.

The petals curl. Pin and mist them, then let them dry flat before sewing.

The letter puckers around the appliqués. Your sewing is too tight. Remove those stitches and sew them again more loosely.

Care

Spot clean with a damp cloth and mild soap. Reshape and dry flat. Don’t machine wash or tumble dry.

Beige leather handbag with crocheted blue V-charm decorated with pink, white flowers and blue heart charm on a wooden table.

Final Notes

The measurement chain is short and reliable. Gauge is 6 sc and 6.5 rnds per 1 in (2.5 cm). Each 18-st arm reaches 2.6 in (6.6 cm) after 17 rnds. The 30-st joining round and the base rounds add 0.9 in (2.3 cm), for a letter 3.5 in (8.9 cm) tall and 3 in (7.6 cm) wide. If every checkpoint matches, your keychain will match too.

Happy crocheting!

Leave a Comment