This hanging grocery bag holder turns a pile of plastic bags into something you’ll enjoy seeing on the wall. The body is a deep teal lace panel with columns of stacked fern leaves. A cream base and top band frame it, and a sage green leafy branch is stitched across the lower front.
Bags go in through the open top and come out through an oval slot near the bottom. A cream tab wraps around a wooden ring so the holder hangs neatly from a hook. For a softer look, swap the teal for sage and make the branch in cream.
This pattern uses US crochet terms. The finished holder is 6 in (15.2 cm) wide laid flat and 16.25 in (41.3 cm) tall, not counting the tab and ring. Its circumference is 12 in (30.5 cm).
You crochet six components: a circular base, a bottom band with a slot, a flat lace panel, a top band, a hanging tab, and a leaf branch appliqué. The panel is seamed into a tube, and the bands and base are sewn on one stitch to one stitch. Then the edges get a short border.
Finished Size and Construction
- Finished size: 6 in (15.2 cm) wide flat x 16.25 in (41.3 cm) tall; the tab and ring add about 3 in (7.6 cm)
- Circumference: 12 in (30.5 cm), 60 stitches all the way up
- Skill level: Intermediate
- Terminology: US
- Yarn weight: DK (#3) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 6 (base, bottom band, lace panel, top band, tab, branch)
- Layout: stacked from the bottom up – base, bottom band, lace panel, top band, then the tab and ring
- Piece sizes: base 3.8 in (9.7 cm) across; bottom band 4 in (10.2 cm) tall; lace panel 12 x 10.75 in (30.5 x 27.3 cm) flat; top band 1.1 in (2.8 cm) tall before the border
- Size before border: 15.85 in (40.3 cm) tall
- Border depth: 2 rounds, 0.4 in (1.0 cm), at the top edge; 1 round around the slot
Materials
Choose a smooth cotton or cotton-blend DK yarn. Cotton holds its shape when the holder is full, and it shows the lace clearly. The amounts below assume about 106 m per 50 g.
- Cream (Color A): 70 g, about 148 m – base, bands, tab, borders
- Deep teal (Color B): 60 g, about 127 m – lace panel
- Sage green (Color C): 10 g, about 21 m – branch appliqué
All quantities include extra yarn for checking gauge and for long sewing tails.
Tools: 4.0 mm (G-6) hook, wooden ring with a 2 in (5.1 cm) outer diameter, tapestry needle, 4 stitch markers, rustproof pins, measuring tape, scissors.
Abbreviations (US Terms)
- ch – chain; sl st – slip stitch
- sc – single crochet; hdc – half double crochet; dc – double crochet
- sk – skip; st(s) – stitch(es)
- RS / WS – right side / wrong side; Rnd – round
Special stitches:
- dc3tog (double crochet 3 together): [yarn over, insert hook in next st, pull up a loop, yarn over, pull through 2 loops] 3 times, yarn over, pull through all 4 loops on the hook. Uses 3 sts and makes 1.
- rev sc (reverse single crochet): Work from left to right. Insert hook in the next st to the right, pull up a loop, yarn over, pull through both loops.
- Leaf: Ch 7. Working in the back bumps: sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, hdc in next ch, sc in last ch. Ch 1 at the tip. Rotate and work in the remaining loops of the same chain: sc, hdc, dc, dc, hdc, sc. Sl st into the stem st where the leaf began. (12 sts plus a ch-1 tip)
Gauge and Checkpoints
- Single crochet (Color A): 20 sts x 22 rnds = 4 in (10.2 cm)
- Lace (Color B): 15 sts (1 repeat) = 3 in (7.6 cm) wide; 2 rows (Row A + Row B) = 0.5 in (1.3 cm) tall
Make the base first, because it doubles as your gauge test.
Checkpoints:
- Base after Rnd 10: 3.8 in (9.7 cm) across, lying flat
- Bottom band after Rnd 12: 6 in (15.2 cm) wide flat
- Bottom band finished: 4 in (10.2 cm) tall
- Lace panel after Row 10: 12 in (30.5 cm) wide
- Lace panel finished: 10.75 in (27.3 cm) tall
- Top band before border: 6 in (15.2 cm) wide flat, 1.1 in (2.8 cm) tall
If your pieces come out too big, go down to a 3.75 mm hook. If they come out too small, go up to a 4.5 mm hook. Never change the stitch counts. Every piece is 60 sts around, which is what lets them sew together cleanly.

Base (Color A)
Worked in joined rounds without turning.
Rnd 1: Make a magic ring, ch 1, work 6 sc in the ring, sl st to the first sc. (6 sts)
Rnd 2: Ch 1, 2 sc in each st around, join. (12 sts)
Rnd 3: Ch 1, [sc in next st, 2 sc in next st] 6 times, join. (18 sts)
Rnds 4–10: Ch 1, [sc in each st up to the increase, 2 sc in next st] 6 times, join. Work 1 more sc between increases each round. Rnd 4 (24 sts), Rnd 5 (30 sts), Rnd 6 (36 sts), Rnd 7 (42 sts), Rnd 8 (48 sts), Rnd 9 (54 sts). Rnd 10: [sc in next 8 sts, 2 sc in next st] 6 times. (60 sts)
Fasten off, leaving a 24 in (61.0 cm) tail.
Bottom Band (Color A)
Worked in joined rounds, with five turned rows that form the slot. Each round begins at center back.
Foundation: Ch 60, sl st to the first ch to form a ring without twisting.
Rnd 1: Ch 1, sc in each ch around, join. (60 sts)
Rnds 2–12: Ch 1, sc in each st around, join. (60 sts)
Fasten off. On Rnd 12, sts 1–15 and 46–60 are the back, and sts 16–45 are the front. Mark st 24 and st 37. Sts 24–37 (14 sts) form the slot, with 8 front sts on each side of it.
Row 13 (RS): Join yarn in st 38. Ch 1, sc in sts 38–60, then in sts 1–23, turn. (46 sts)
Rows 14–16: Ch 1, sc in each st across, turn. (46 sts)
Row 17 (RS): Ch 1, sc in each st across. Do not turn. Ch 14, sl st to the first sc of Row 17. (46 sc + 14 ch)
Rnd 18: Ch 1, sc in the same st and the next 45 sts, sc in each of the 14 ch, join. (60 sts)
Rnds 19–22: Ch 1, sc in each st around, join. (60 sts)
Fasten off, leaving a 30 in (76.2 cm) tail. The slot is 14 sts wide, which is 2.8 in (7.1 cm). It is 5 rows tall, about 0.9 in (2.3 cm).
Lace Panel (Color B)
Worked flat in rows, with a 15-st repeat worked 4 times across. Each repeat makes one fern column. It has a dc frame line on each side, a dc spine in the center, and a dc3tog leaf on each side leaning in toward the spine.
Foundation: Ch 61.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across, turn. (60 sts)
Row 2 (WS): Ch 1, sc in each st across, turn. (60 sts)
Row 3 (RS, Row A): Ch 3 (counts as dc), ch 2, sk 2 sts, dc3tog over next 3 sts, ch 3, sk 1 st, dc in next st (spine), ch 3, sk 1 st, dc3tog over next 3 sts, ch 2, sk 2 sts, dc in next st (frame)*, dc in next st (frame). Repeat from * 2 more times, then work from * to ** once, turn. (60 sts and chs)
Each repeat uses 15 sts and makes 15: dc 1 + ch 2 + dc3tog 1 + ch 3 + dc 1 + ch 3 + dc3tog 1 + ch 2 + dc 1. Where two repeats meet, two frame dc sit side by side. They form the doubled lines between the columns.
Row 4 (WS, Row B): Ch 1, sc in each dc, each dc3tog and each ch across, ending with sc in the top of the turning ch-3, turn. (60 sts)
Rows 5–42: Repeat Rows 3–4 nineteen more times. (60 sts) You now have 20 lace pairs, 10 in (25.4 cm) of lace.
Rows 43–44: Ch 1, sc in each st across, turn. (60 sts)
Fasten off, leaving a 30 in (76.2 cm) tail. The panel measures 12 x 10.75 in (30.5 x 27.3 cm).
Top Band (Color A)
Foundation: Ch 60, sl st to the first ch without twisting.
Rnd 1: Ch 1, sc in each ch around, join. (60 sts)
Rnds 2–6: Ch 1, sc in each st around, join. (60 sts)
Fasten off. The band is 1.1 in (2.8 cm) tall and 6 in (15.2 cm) wide flat.
Hanging Tab (Color A)
Foundation: Ch 7.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (6 sts)
Rows 2–14: Ch 1, sc in each st across, turn. (6 sts)
Fasten off, leaving a 12 in (30.5 cm) tail. The tab is 1.2 in (3.0 cm) wide and about 2.5 in (6.4 cm) long.
Leaf Branch Appliqué (Color C)
Stem: Ch 26.
Tip leaf: Make a Leaf, finishing with a sl st into the 26th ch.
Side leaves: Working back down the stem, *sl st in next 3 ch, Leaf, Leaf. Repeat from * 5 more times. (18 ch used, 12 side leaves)
Lower stem: Sl st in each of the remaining 7 ch. (25 ch worked)
Fasten off, leaving a 20 in (50.8 cm) tail. The branch has 13 leaves and is about 6.5 in (16.5 cm) long. Each pair of leaves shares one stem st and fans out to the left and right.
Make All Pieces
- Color A (cream): 1 base, 1 bottom band, 1 top band (each 60 sts), 1 tab (6 sts)
- Color B (teal): 1 lace panel (60 sts wide)
- Color C (sage): 1 branch (13 leaves)
Layout, top to bottom:
[ ring + tab ] inside top band, center back
[ top band ] 60 sts, 1.1 in (2.8 cm) + border
[ lace panel (tube) ] 60 sts, 10.75 in (27.3 cm)
[ bottom band + slot ] 60 sts, 4 in (10.2 cm)
[ base ] 60 sts, 3.8 in (9.7 cm) across
Joining
Whipstitch every seam with matching yarn. Each horizontal seam is exactly 60 sts to 60 sts, so nothing needs easing in.
- Close the panel. Fold the panel RS out. Whipstitch the side edges together, matching row end to row end, for all 44 rows. This seam is center back. The two edge frame lines end up side by side, just like the lines between the other columns.
- Bottom band. Match Rnd 22 of the band to Row 1 of the panel. Line up the band’s center back with the panel seam so the slot is centered on the front. Whipstitch 1 st to 1 st through the back loops. (60 sts)
- Base. Set the base into the lower edge of the band. Whipstitch Rnd 10 of the base to Rnd 1 of the band, 1 st to 1 st. (60 sts)
- Top band. Match Rnd 1 of the band to Row 44 of the panel, with the seams aligned. Whipstitch 1 st to 1 st. (60 sts)
- Tab. Fold the tab around the ring. Sew both ends inside the top band at center back, leaving 1.5 in (3.8 cm) of tab above the edge.
- Branch. Pin the branch diagonally on the lower front. Place the stem base just above the bottom band, 1 in (2.5 cm) from the left fold, with the tip rising to the right about 6 in (15.2 cm). Sew along the stem, then tack each leaf at its center and tip.
Tension: Pull the stitches snug enough to close gaps, but not so tight that the seam puckers. The bands should still measure 6 in (15.2 cm) wide flat.
Size checkpoint: The body should now measure 15.85 in (40.3 cm) tall.
Border
Border gauge: 20 sc = 4 in (10.2 cm), the same as the body, so the edge stays 12 in (30.5 cm) around.
Top Edge (Color A)
When flattened, the tube has two sides: 30 sts on the front and 30 sts on the back.
Rnd 7: Join yarn at center back of the top band. Ch 1, sc in each st around, join. (60 sts: 30 front, 30 back)
Rnd 8: Ch 1, rev sc in each st around, join. (60 sts: 30 front, 30 back)
The border adds 0.4 in (1.0 cm). The top band is now 1.5 in (3.8 cm) tall and the body is 16.25 in (41.3 cm) tall.
Slot Edge (Color A)
Rnd 1: Join yarn at the lower right corner of the slot and ch 1. Work 14 sc along the bottom edge (one in each skipped st of Rnd 12), 5 sc up the left side (one in each row end), 14 sc along the top edge (one in each ch), and 5 sc down the right side, then join. (38 sts: 14 + 5 + 14 + 5)
Why the math works: Both borders work 1 sc into each existing st, so the 60-st circumference never changes and splits evenly into 30 sts per side. On the slot, sc rows are 1 st tall, so 1 sc per row end lies flat. The 14-st edges match the 14 skipped sts and the 14 ch exactly. The corners need no increases because the slot is meant to round into an oval.
Final Blocking
- Weave in all ends along the seams.
- Mist the holder until it is damp but not soaked.
- Roll a towel to a 12 in (30.5 cm) circumference and slide it inside.
- Flatten the holder so the panel seam is centered on the back.
- Pin the panel to 6 x 10.75 in (15.2 x 27.3 cm), opening the lace evenly.
- Pat the leaves flat and shape the slot into an oval.
- Let it dry completely before removing the pins and towel.
Final Quality-Control Checklist
- Base is 3.8 in (9.7 cm) across and lies flat
- All four horizontal seams join 60 sts to 60 sts, 1 to 1
- Panel seam, band joins and tab all line up at center back
- Slot is centered with 8 sts on each side and has a 38-st border
- Top border has 60 sts and doesn’t flare
- Branch has 13 leaves, all tacked down
- Body measures 6 x 16.25 in (15.2 x 41.3 cm)
- Tab is secure around the ring
Troubleshooting
Base cups or ruffles: Cupping means your gauge is tight, and ruffling means it is loose. Recount the stitches first, then change hook size if the counts are right.
Panel narrower than 12 in (30.5 cm): Keep the ch spaces loose, and check that Row A has 60 sts and chs.
Fern columns drift: Start every Row A with ch 3, and end each Row B with a sc in the top of the turning ch.
Slot is off center: Recount Rnd 12 from the join and mark sts 24 and 37 again.
Seams pucker: Whipstitch more loosely, and keep the 1-to-1 matching exact.
Branch curls: Steam it lightly and tack down each leaf tip.
Care
Hand wash in cool water with mild soap, roll in a towel to remove the water, and dry flat. Reshape the lace while it is damp.

Final Notes
Everything in this pattern rests on 60 stitches around. The base grows to 60 sts and 3.8 in (9.7 cm) across. The bottom band keeps 60 sts for 4 in (10.2 cm) and holds a 14-st slot. The lace panel is 60 sts and 12 in (30.5 cm) wide, and 10.75 in (27.3 cm) tall. The top band keeps 60 sts and reaches 1.5 in (3.8 cm) with its border. Together they make a 6 x 16.25 in (15.2 x 41.3 cm) holder that hangs from a 2 in (5.1 cm) ring. Get the gauge right on the base, and the rest will follow.
Happy crocheting!