This letter Y keychain is a small, sturdy bag charm. It is worked in light-blue tapestry single crochet with five cream diamonds running up the letter. Three yellow flowers with green leaves are sewn on top, so it looks bright and springlike.
The colors are soft sky blue, warm cream, buttercup yellow and leaf green. The dense tapestry fabric keeps its shape on a key ring, and the flowers add a little texture. The pattern uses US crochet terms.
The finished letter measures about 4.6 in wide × 5.2 in tall (11.7 × 13.2 cm). The stem is 2.0 in (5.1 cm) wide after the border.
You work the Y in one piece, from the bottom up, in turned rows. The stem grows into a wider junction, and then each arm is worked separately and slanted outward. One border round neatens the edges. Last, you make three flowers and five leaves, sew them on, and add a hanging loop.
Finished Size and Construction
- Finished size: 4.6 × 5.2 in (11.7 × 13.2 cm)
- Skill level: Easy-intermediate (tapestry color changes, simple shaping)
- Terminology: US
- Yarn weight: Sport (#2) cotton
- Hook: 2.5 mm
- Number of pieces: 1 letter, plus 3 flower and 5 leaf appliqués
- Layout: Single piece, no joining
- Letter size before border: 4.3 in wide × 4.9 in tall (10.9 × 12.4 cm)
- Border depth: about 0.15 in (0.4 cm) per side, 1 round
Materials
Use a smooth mercerized or combed sport-weight cotton, about 50 g / 150 m per ball. Cotton gives crisp tapestry stitches and doesn’t stretch on a key ring.
- Color B (light blue): 10 g / 30 m
- Color C (cream): 8 g / 24 m
- Color Y (yellow): 3 g / 9 m
- Color G (green): 2 g / 6 m
The quantities include a safety margin. Cream is carried through every row of the letter, so it uses more yarn than its visible area suggests.
Tools:
– 2.5 mm crochet hook
– Tapestry needle
– 1 in (2.5 cm) gold split ring with a short chain and jump ring
– Rustproof pins and a blocking mat
– Spray bottle
– Scissors and stitch markers
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- sc2tog – single crochet 2 together
- MR – magic ring
- B / C / Y / G – blue / cream / yellow / green
Tapestry sc (special technique): Hold the unused color along the top of the row and work each sc over it, so the carried strand is hidden inside the stitch. To change color, work the last sc of the old color until 2 loops remain, then finish it by pulling through with the new color. Carry C through every row of the letter, including the plain rows, so the thickness stays even.
Gauge and Checkpoints
Gauge: 6 sc and 7 rows = 1 in (2.5 cm) in tapestry sc, measured over 12 sc × 14 rows = 2 in (5.1 cm).
The stem works as your gauge swatch. Stop after Row 16 and measure:
- After Row 16: 1.7 in wide × 2.3 in tall (4.3 × 5.8 cm)
- After Row 24: 3.0 in wide (7.6 cm), 3.4 in tall (8.6 cm)
- After Row 34: 4.3 in wide × 4.9 in tall (10.9 × 12.4 cm)
- After border: 4.6 × 5.2 in (11.7 × 13.2 cm)
If the stem is too wide, change to a 2.25 mm hook. If it’s too narrow, change to a 2.75 mm hook. Restart rather than adjusting tension partway through, because the diamonds show uneven tension clearly. If the width is right but you are getting more than 7 rows per inch, pull up the loops slightly. If you are getting fewer, keep your carried strand snug.

Letter Y Body
Each color group in the instructions is written as the number of stitches that row produces. Increases and decreases always happen inside the blue edge groups.
Stem
With B, ch 11.
Row 1: Sc in 2nd ch from hook and in each ch across, picking up C to carry from the first stitch. (10 sc)
Row 2: Ch 1, turn, 10 B. (10)
Rows 3–8 (Diamond A): Ch 1, turn at the start of each row.
– Row 3: 4 B, 2 C, 4 B. (10)
– Row 4: 3 B, 4 C, 3 B. (10)
– Row 5: 2 B, 6 C, 2 B. (10)
– Row 6: 2 B, 6 C, 2 B. (10)
– Row 7: 3 B, 4 C, 3 B. (10)
– Row 8: 4 B, 2 C, 4 B. (10)
Rows 9–10: Ch 1, turn, 10 B. (10)
Rows 11–16 (Diamond B): Repeat Rows 3–8. (10)
Checkpoint: 1.7 × 2.3 in (4.3 × 5.8 cm). Each diamond is 6 sts × 6 rows, about 1.0 × 0.9 in (2.5 × 2.3 cm).
Junction
Ch 1 and turn at the start of every row.
Row 17: Inc, 8 sc, inc, all in B. (12)
Row 18: 12 B. (12)
Row 19: Inc, 4 sc in B (6 B), 2 C, 4 sc, inc in B (6 B). (14)
Row 20: 5 B, 4 C, 5 B. (14)
Row 21: Inc, 3 sc in B (5 B), 6 C, 3 sc, inc in B (5 B). (16)
Row 22: 5 B, 6 C, 5 B. (16)
Row 23: Inc, 5 sc in B (7 B), 4 C, 5 sc, inc in B (7 B). (18)
Row 24: 8 B, 2 C, 8 B. (18)
Rows 19–24 form Diamond C (2, 4, 6, 6, 4, 2 cream). The 4 increase rows add 1 stitch at each end of each row, which turns the 10-stitch stem into 18 stitches. Checkpoint: 3.0 in (7.6 cm) wide at Row 24.
Arm 1
Arm 1 is the arm on the side where Row 24 ended. Each arm has 9 stitches. On every shift row, you work sc2tog at the inner (crotch) edge and an inc at the outer edge. The count stays at 9, but the arm moves 1 stitch outward.
Row 25: Ch 1, turn, 9 B. Leave the remaining 9 sts unworked. (9)
Row 26 (shift): Ch 1, turn, sc2tog, 6 sc, inc, all in B. (9)
Row 27: Ch 1, turn, 9 B. (9)
Row 28 (shift): Ch 1, turn, sc2tog, 3 sc in B (4 B), 1 C, 2 sc, inc in B (4 B). (9)
Row 29: Ch 1, turn, 3 B, 3 C, 3 B. (9)
Row 30 (shift): Ch 1, turn, sc2tog, 1 sc in B (2 B), 5 C, inc in B (2 B). (9)
Row 31: Ch 1, turn, 3 B, 3 C, 3 B. (9)
Row 32 (shift): Repeat Row 28. (9)
Rows 33–34: Ch 1, turn, 9 B. (9)
Fasten off both colors and leave 6 in (15.2 cm) tails. Rows 28–32 form Diamond D (1, 3, 5, 3, 1 cream). It leans slightly with the arm.
Arm 2
Row 25: Join B in the first unworked stitch of Row 24 next to Arm 1, at the crotch, and pick up C to carry. Ch 1, then 9 B, ending at the outer edge. (9)
Row 26 (shift): Ch 1, turn, inc, 6 sc, sc2tog, all in B. (9)
Row 27: Ch 1, turn, 9 B. (9)
Row 28 (shift): Ch 1, turn, inc, 2 sc in B (4 B), 1 C, 3 sc, sc2tog in B (4 B). (9)
Row 29: 3 B, 3 C, 3 B. (9)
Row 30 (shift): Inc in B (2 B), 5 C, sc, sc2tog in B (2 B). (9)
Row 31: 3 B, 3 C, 3 B. (9)
Row 32 (shift): Repeat Arm 2 Row 28. (9)
Rows 33–34: 9 B. (9)
Fasten off. Each arm has 4 shift rows, so it moves 4 stitches outward. The top span is 18 + 4 + 4 = 26 sts, or 4.3 in (10.9 cm). The total height is 34 rows, or 4.9 in (12.4 cm). Each arm is 1.5 in (3.8 cm) wide.
Weave in all tails before the border, working them into same-color stitches.
Border
Border gauge: 1 sc in each stitch along the top and bottom edges, and 1 sc in each row-end along the sides. A sc row is almost as tall as a sc is wide, so working 1 stitch per row-end lies flat.
Work in B only, with no carried strand. With the right side facing, join B in the first foundation chain at a bottom corner.
Round 1:
– Bottom edge: 3 sc in the corner st, 8 sc, 3 sc in the corner st. (14)
– Stem side: 1 sc in each row-end of Rows 1–16. (16)
– Junction side: 1 sc in each row-end of Rows 17–24. (8)
– Arm outer side: 1 sc in each row-end of Rows 25–34. (10)
– Arm top: 3 sc in the first st, 7 sc, 3 sc in the last st. (13)
– Inner sides and crotch: 9 sc down the inner row-ends of this arm. Then sc2tog across the last inner row-end of this arm and the first inner row-end of the other arm. Then 9 sc up the other inner side. (19)
– Second arm top: 3 sc, 7 sc, 3 sc. (13)
– Second arm outer side: 10 sc.
– Second junction side: 8 sc.
– Second stem side: 16 sc.
– Sl st to the first sc. (127 sts)
Why the math works: Each outer side uses all 34 row-ends once: 16 + 8 + 10 = 34. The two outer sides use 68 sts. The bottom uses its 10 stitches, and the 2 extra stitches at each of its 2 corners make 14. Each arm top uses its 9 stitches, plus 2 extra at each corner, for 13. The inner sides have 20 row-ends, and the crotch sc2tog joins 2 of them, giving 19. The total is 14 + 68 + 13 + 13 + 19 = 127.
Hanging loop: Join B in the crotch sc2tog, ch 12, and sl st in the same stitch. Fasten off and weave in the ends. The loop stands about 1 in (2.5 cm) tall.
Flowers and Leaves
Flower (make 3, Y):
– Round 1: MR, ch 1, 5 sc in the ring, sl st to the first sc. (5)
– Round 2: In each sc work (ch 2, 2 dc, ch 2, sl st). (5 petals)
Fasten off and leave a 12 in (30.5 cm) tail. Each flower is about 0.8 in (2.0 cm) across. With C, work a French knot in the center (wrap the needle 3 times).
Leaf (make 5, G): Ch 5. Sl st in the 2nd ch from hook, sc, hdc, sc. Ch 1 to make the point. Working down the other side of the chain: sc, hdc, sc, sl st. Fasten off and leave an 8 in (20.3 cm) tail. Each leaf is about 0.6 in (1.5 cm) long.
Final Blocking
- Lay the letter face down on the blocking mat.
- Pin the bottom corners and arm-top corners so the size is 4.6 × 5.2 in (11.7 × 13.2 cm).
- Pin the stem straight and 2.0 in (5.1 cm) wide.
- Spray until damp. Press the fabric flat with your palm.
- Let it dry completely, then unpin.
- Pin the leaves under the flowers, and sew them on with the tails using small stitches through the back layer:
- one flower over the right arm’s diamond, with 2 leaves on its outer side
- one flower at the left edge of the upper stem, with leaves on its left and right
- one flower near the bottom of the stem, with 1 leaf on its left
- Attach the jump ring through the hanging loop.
Final Quality-Control Checklist
- The stem is 10 sts and each arm is 9 sts all the way up
- There are 5 diamonds, and the cream doesn’t show through the blue
- The arms slant evenly and mirror each other
- The border round has 127 sts and lies flat without ruffling
- The size is 4.6 × 5.2 in (11.7 × 13.2 cm)
- The flowers and leaves are stitched down securely, with no loose petals
- The split ring hardware is closed tightly
Troubleshooting
- Cream peeks through the blue stitches: Keep the carried strand snug on top of the row, and twist the yarns less.
- The letter slants or leans: Your sc2tog and inc are on swapped edges. Check that every shift row starts with sc2tog at the crotch on Arm 1, and with an inc at the outer edge on Arm 2.
- The border ruffles: Change to a hook 0.25 mm smaller for the border.
- The border cups: Change to a hook 0.25 mm larger for the border.
- The diamonds look stretched: Your row gauge is off. Check that you get 7 rows per inch.
- There’s a hole at the crotch: Close it with the border sc2tog and a few stitches from a B tail.
- The petals curl: Steam them lightly and pin them flat before sewing.
Care
Hand wash in cool water with mild soap and dry flat. Remove the metal hardware first so it doesn’t tarnish.

Final Notes
The measurements build on each other: 6 sc × 7 rows per inch gives a 10-stitch stem that is 1.7 in (4.3 cm) wide. The junction grows to 18 sts, or 3.0 in (7.6 cm). Two 9-stitch arms each shift 4 sts outward, giving a 4.3 × 4.9 in (10.9 × 12.4 cm) letter. A 127-stitch border then finishes it at 4.6 × 5.2 in (11.7 × 13.2 cm). If the stem checkpoint is right, everything after it will fit.
Happy crocheting!