Blush Window Hanging Toilet Paper Holder Crochet Pattern

The Blush Window holder is a small hanging basket that keeps a spare toilet roll on a towel bar or bamboo rod. Each holder has a straight-sided basket with a flat base, a V-shaped strap, and a short buttoned tab that wraps over the rod. This pattern makes a matching pair.

Blush pink single crochet makes up the solid bands. Cream bands of open filet “windows” break up the wall, and a corded cream crab-stitch rim finishes the top. The look is soft and Scandinavian, and the pieces work up quickly in worsted cotton.

The pattern uses US crochet terms. Each finished basket measures 5.5 in (14.0 cm) across and 4 in (10.2 cm) tall. The strap tab is 7 in (17.8 cm) long, and the V-strap is 16 in (40.6 cm) long before you sew it on.

For each holder you work the base in joined rounds from a magic ring. You then build the wall straight up from the base edge with no increases and finish it with a 2-round cream border. The tab and the V-strap are flat strips. A wooden button stitched through both strips holds the hanger together.

Finished Size and Construction

  • Finished basket size: 5.5 in (14.0 cm) diameter × 4 in (10.2 cm) tall
  • Skill level: Easy
  • Terminology: US
  • Yarn weight: Worsted (#4), cotton or cotton blend
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 6 in total: 2 baskets, 2 tabs and 2 V-straps (3 pieces per holder)
  • Layout: 2 separate holders hung side by side on one rod
  • Piece size: base 5.5 in (14.0 cm) across; tab 1.4 × 7 in (3.6 × 17.8 cm); V-strap 1.4 × 16 in (3.6 × 40.6 cm)
  • Basket size before border: 5.5 in (14.0 cm) diameter × 3.5 in (8.9 cm) tall
  • Border depth: 0.5 in (1.3 cm), 2 rounds

Materials

Use a smooth, firm worsted cotton. It holds its shape better than acrylic and stands up to bathroom humidity. Do not use splitty or very fuzzy yarn, because the filet windows need clean stitch edges.

  • Blush pink: 70 g / 119 m
  • Cream: 35 g / 60 m

These quantities are for both holders and include a margin of about 25%.

Tools:
– 5.0 mm (H-8) crochet hook
– 2 wooden buttons, 0.75 in (1.9 cm), with 2 or 4 holes
– Tapestry needle
– Sewing needle and matching thread for the buttons
– Stitch marker
– Scissors
– Tape measure
– Rustproof pins

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • BLO – back loop only
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • rnd – round

Special stitch: reverse single crochet (crab stitch). Work from left to right (right to left if you are left-handed). Insert the hook into the next stitch to the right, yarn over and pull up a loop, then yarn over and pull through both loops. This makes a twisted, corded edge.

Filet window round. Work dc posts separated by ch-1 spaces, skipping 1 stitch under each space. Each dc counts as 1 stitch and each ch-1 sp counts as 1 stitch, so the round keeps the same total count.

Gauge and Checkpoints

Gauge: 14 sc × 16 rnds = 4 in (10.2 cm). One dc round is about 0.5 in (1.3 cm) tall, the same as 2 sc rounds.

Make one complete basket first and measure it before you start the second.

Checkpoints:
– After Rnd 4 (24 sts), the base measures 2 in (5.1 cm) across.
– After Rnd 6 (36 sts), the base measures 3.25 in (8.3 cm) across.
– After Rnd 10 (60 sts), the base measures 5.5 in (14.0 cm) across.
– After Rnd 22, the wall measures 3.5 in (8.9 cm) tall from the BLO turning ridge.
– After the border, the basket measures 4 in (10.2 cm) tall.

If your piece is too big: go down to a 4.5 mm (US 7) hook. A base wider than 5.75 in (14.6 cm) lets the roll wobble.

If your piece is too small: go up to a 5.5 mm (I-9) hook. A base narrower than 5.25 in (13.3 cm) will not fit a standard 4.5 in (11.4 cm) roll comfortably.

Change only the hook size, never the stitch counts. The 60-stitch circumference is what keeps the wall straight.

Close-up of chunky crocheted fabric alternating between blush pink and cream stripes with raised, dimensional stitches.

Basket (Make 2)

All rounds are joined with a sl st to the first st. Ch 1 at the start of each sc round; it does not count as a stitch. To change color, work the joining sl st with the new color: pull the new color through on the final yarn over.

Base

With pink:

Rnd 1: Magic ring, 6 sc in the ring, join. (6 sts)
Rnd 2: Inc in each st around, join. (12 sts)
Rnd 3: Sc 1, inc 6 times, join. (18 sts)
Rnd 4: Sc 2, inc 6 times, join. (24 sts)
Rnd 5: Sc 3, inc 6 times, join. (30 sts)
Rnd 6: Sc 4, inc 6 times, join. (36 sts)
Rnd 7: Sc 5, inc 6 times, join. (42 sts)
Rnd 8: Sc 6, inc 6 times, join. (48 sts)
Rnd 9: Sc 7, inc 6 times, join. (54 sts)
Rnd 10: Sc 8, inc 6 times, join. (60 sts)

Tip: on Rnds 6 and 8, move the increase to the middle of each repeat to keep the circle round instead of hexagonal. The count stays the same.

Lay the base flat. It should measure 5.5 in (14.0 cm) across and lie without ruffling or cupping.

Wall

Rnd 11 (pink): Sc in BLO of each st around, join. (60 sts) This makes the ridge where the base turns up into the wall.
Rnd 12 (pink): Sc in each st around. Join and change to cream. (60 sts)
Rnd 13 (cream): Sc in each st around, join. (60 sts)
Rnd 14 (cream, filet): Ch 4 (counts as dc + ch 1). Sk next st, dc in next st, ch 1. Repeat from * until 1 st remains, sk the last st, then join to the 3rd ch of the ch-4. (30 dc + 30 ch-1 sps = 60 sts)
Rnd 15 (cream): Ch 1, sc in each dc and in each ch-1 sp around. Join and change to pink. (60 sts)
Rnds 16–17 (pink): Sc in each st around. Join, and change to cream at the end of Rnd 17. (60 sts)
Rnd 18 (cream): Sc in each st around, join. (60 sts)
Rnd 19 (cream, filet): Work the same as Rnd 14. (30 dc + 30 ch-1 sps = 60 sts)
Rnd 20 (cream): Work the same as Rnd 15, then change to pink. (60 sts)
Rnds 21–22 (pink): Sc in each st around. Join, and change to cream at the end of Rnd 22. (60 sts)

Wall checkpoint: Rnds 11–22 are 10 sc rounds and 2 dc rounds, which gives 2.5 in + 1 in = 3.5 in (8.9 cm). The wall should rise straight, with no flare.

Tab (Make 2)

With pink, ch 6.

Row 1: Sc in the 2nd ch from the hook and in each ch across, turn. (5 sts)
Rows 2–25: Ch 1, sc across, turn. (5 sts)
Row 26 (buttonhole): Ch 1, sc 1, ch 2, sk 2, sc 2, turn. (1 + 2 + 2 = 5 sts)
Row 27: Ch 1, sc 2, 2 sc in the ch-2 sp, sc 1, turn. (5 sts)
Row 28: Ch 1, sc across. (5 sts) Fasten off and leave a 6 in (15.2 cm) tail.

The tab measures 1.4 in (3.6 cm) wide and 7 in (17.8 cm) long.

V-Strap (Make 2)

With pink, ch 6.

Row 1: Sc in the 2nd ch from the hook and in each ch across, turn. (5 sts)
Rows 2–64: Ch 1, sc across, turn. (5 sts)

Fasten off and leave a 12 in (30.5 cm) tail. Join a second 12 in (30.5 cm) tail at the starting end. Place a marker at Row 32 to mark the center of the strap. The strap measures 1.4 in (3.6 cm) × 16 in (40.6 cm).

Make All Pieces

Per holder:
– 1 basket: pink base and wall, cream filet bands and border
– 1 pink tab
– 1 pink V-strap
– 1 button

Totals for the pair:
– Pink: 2 bases and walls, 2 tabs, 2 V-straps
– Cream: 4 filet bands and 2 borders

Hanging layout:

=====[ROD]==========================[ROD]=====
       |tab|                  |tab|
        (o)                    (o)
        / \                    / \
       /   \                  /   \
     [BASKET 1]            [BASKET 2]

Hang the two holders about 6 in (15.2 cm) apart, center to center.

Joining

Here “joining” means attaching the strap pieces to each basket. The baskets are never joined to each other.

1. Attach the V-strap ends. Use the 12 in (30.5 cm) tails to whipstitch each end of the V-strap to the inside of the basket wall. Center one end over st 1 of Rnd 22 and the other over st 31, so the ends are exactly 30 sts apart, directly opposite each other. Overlap each end by 0.75 in (1.9 cm), which is 3 rows, and sew through the pink Rnds 21–22 only, keeping the stitches hidden behind the border. Sew stitch-to-stitch: each of the 5 strap stitches goes onto 1 wall stitch, so each end covers 5 wall sts (sts 59–3 and sts 29–33).

2. Build the hanger. Lay the center of the V-strap (Rows 32–33) behind the start of the tab (Rows 3–4). Pin the two layers together.

3. Sew on the button. With sewing thread, stitch the button onto the front of the tab at Row 4, going through both layers. This one attachment holds the hanger together.

Tension: pull the sewing stitches snug enough to close any gaps, but not so tight that they pucker the wall or the rim.

Size checkpoint: each arm of the V hangs free for 16 in ÷ 2 − 0.75 in = 7.25 in (18.4 cm). Hold the holder up by the button. Both arms should be the same length, and the rim should hang level.

Fold the tab over the rod and push the button through the Row 26 buttonhole.

Border

Border gauge: the border keeps the wall gauge of 14 sts per 4 in (10.2 cm), or 3.5 sts per inch. For counting, divide the round into 4 quarters of 15 sts each, starting at the seam.

Rnd 23 (cream): Ch 1, sc in each st around, join. (15 per quarter × 4 = 60 sts)
Rnd 24 (cream): Ch 1, reverse sc in each st around, join. (15 per quarter × 4 = 60 sts) Fasten off and weave in the end.

Why the math works: the wall has 60 sts, and 60 ÷ 3.5 = 17.1 in (43.4 cm) of circumference. That matches the base edge exactly. The border adds no stitches, so the rim stays the same width as the base and does not ruffle. Crab stitch worked 1 per stitch draws the edge in slightly, which keeps the corded rim firm and upright. Rnds 23–24 add 0.5 in (1.3 cm), so 3.5 in + 0.5 in = 4 in (10.2 cm) finished height.

Final Blocking

  1. Weave in all ends before blocking. Keep color-change ends inside their own color band.
  2. Spray each basket lightly with water until it is damp but not soaked.
  3. Slide a 5.5 in (14.0 cm) jar or a roll wrapped in plastic into the basket.
  4. Press the base flat. Line the windows up vertically so every dc post stands straight.
  5. Pin the tab and V-strap flat to 1.4 in (3.6 cm) wide. Smooth the tab to 7 in (17.8 cm) long.
  6. Let everything dry completely, then remove the form.

Final Quality-Control Checklist

  • [ ] The base lies flat and measures 5.5 in (14.0 cm) across.
  • [ ] Every wall round has 60 sts, and each filet round has 30 windows.
  • [ ] The posts in both filet bands line up vertically.
  • [ ] The basket is 4 in (10.2 cm) tall and has no flare.
  • [ ] The crab-stitch rim is even all the way around.
  • [ ] The strap ends are exactly opposite each other, 30 sts apart.
  • [ ] The button is sewn securely through both layers.
  • [ ] Both holders match in height and strap length.

Troubleshooting

The base cups. Your tension is tight. Go up a hook size, or check that each round has exactly 6 increases.

The base ruffles. You have extra stitches. Count again and rework the round so it has the correct total.

The wall flares outward. You probably added stitches in a filet round. The total must stay at 60: 30 dc + 30 ch-1 sps.

The color-change seam jogs. This is normal for joined rounds. Keep every join in the same position and turn that side toward the wall.

The button slips out. Tighten Row 27 by working the 2 sc firmly, or use a button 1 in (2.5 cm) across.

The basket tilts when it hangs. One strap end is off-center. Re-sew it so it sits exactly 30 sts from the other end.

Care

Hand wash in cool water, press out the water in a towel, and dry flat over a jar so the basket keeps its shape. Do not tumble dry, because it can shrink cotton unevenly.

Pink and cream striped crocheted toilet paper holders hanging from a wooden bathroom rod beside white subway tiles.

Final Notes

Every measurement depends on the one before it. A gauge of 14 sc = 4 in (10.2 cm) gives a 60-st base that measures 5.5 in (14.0 cm) across. Twelve straight wall rounds raise the wall to 3.5 in (8.9 cm), and the 2-round border brings it to 4 in (10.2 cm). The 5-st straps measure 1.4 in (3.6 cm) wide, and the 30-st spacing of the strap ends keeps each basket hanging level. Check each stage before you move on and both holders will come out the same.

Happy crocheting!

Leave a Comment