Golden Ginkgo Fan Strand Curtain Crochet Pattern

This curtain is made from eight hanging strands of little ginkgo-style fans. Each fan has fine cream spokes that open into a solid butter-yellow half circle with a rounded scalloped edge. When the strands hang side by side, they read as a soft, airy screen that lets light through.

The palette is just two colors: cream for the stems and spokes, and butter yellow for the fan bodies. The style is light and botanical, and it suits a window, a pantry opening, or a half-door. The pattern uses US crochet terms throughout.

The finished curtain measures 56 in (142.2 cm) wide and 37 in (94.0 cm) long. Each fan measures 3.5 in (8.9 cm) wide and 2 in (5.1 cm) tall from the stalk tip.

Each strand is worked from the bottom up as one continuous cream chain. At every node you work two fans, each with a short stalk and seven slip-stitch spokes. After the cream is done, you join yellow to each fan, work two body rows, and finish with a scalloped edge. Last, the strands slide onto a rod.

Finished Size and Construction

  • Finished curtain: 56 in (142.2 cm) wide × 37 in (94.0 cm) long
  • Skill level: Intermediate (simple stitches, many repeats)
  • Terminology: US crochet terms
  • Yarn weight: DK (light worsted) cotton
  • Hook: 3.5 mm (US E-4)
  • Number of pieces: 8 strands
  • Layout: 8 strands hung side by side, 7 in (17.8 cm) apart center to center
  • Piece size: each strand 7 in (17.8 cm) wide across the paired fans × 37 in (94.0 cm) long
  • Fan size before border: 3 in (7.6 cm) wide × 1.5 in (3.8 cm) tall from the stalk tip
  • Border depth: 0.25 in (0.6 cm) at each side and 0.5 in (1.3 cm) at the top of each fan
  • Fans per strand: 27 (1 top fan + 13 pairs)

Materials

Choose a smooth mercerized or combed DK cotton. Cotton holds the fan shape well and doesn’t stretch much while hanging. Avoid fuzzy yarns, because they hide the fine spokes.

  • Cream (stems and spokes): 200 g, about 460 m (503 yd)
  • Butter yellow (fan bodies and scallops): 400 g, about 920 m (1,006 yd)

Tools:

  • 3.5 mm (US E-4) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch markers
  • Rust-proof pins and a blocking board or foam mats
  • Spray bottle
  • Wooden curtain rod at least 60 in (152.4 cm) long

The quantities include a margin of about 15% for swatching, tails, and gauge differences.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)

Special stitch – Spoke: Ch 6. Sl st in the 2nd ch from the hook and in each of the next 4 ch, then sl st in the stalk tip. This makes a 5-sl-st spoke 1 in (2.5 cm) long, and you end back at the stalk tip. The skipped ch at the free end is the spoke tip.

Gauge and Checkpoints

Make one test fan before you start a full strand.

  • Stem gauge: 12 ch = 2.5 in (6.4 cm)
  • Spoke: 1 in (2.5 cm) from the stalk tip to the spoke tip
  • After yellow Row 2: 3 in (7.6 cm) wide × 1.5 in (3.8 cm) tall from the stalk tip
  • After the border: 3.5 in (8.9 cm) wide × 2 in (5.1 cm) tall from the stalk tip

If your fan is too big, go down to a 3.25 mm hook and chain more firmly. If it’s too small, go up to a 3.75 mm hook. Check the stem chain on its own as well. If 12 ch measures more than 2.5 in (6.4 cm), the tiers will spread apart and the strand will grow. Change the stem chain count rather than forcing the gauge.

Yellow and cream crocheted butterfly ornament suspended from a rope against a blurred interior.

Fan Frame (Cream)

Work every fan frame from a node, which is the last stem chain you made.

  1. Stalk: Ch 4. The 4th ch is the stalk tip.
  2. Spokes: Work 7 Spokes. After each one, sl st back into the stalk tip. (7 spokes made.)
  3. Return: Sl st in each of the 3 remaining stalk ch, then sl st in the node ch. (4 sl st.)

Fan out the 7 spokes like the ribs of a hand fan. Spokes 1 and 7 are the outer edges.

Fan Body (Yellow)

Work these rows on every fan after the strand’s cream work is finished.

Row 1: With the spokes laid flat in order, join yellow with a sc in the tip of Spoke 1. (Ch 3, sc in the tip of the next spoke) 6 times. Turn.
(7 sc and 6 ch-3 sp.)*

Row 2: Ch 3 (counts as dc), then dc in the same sc. Wait, see below for the exact sequence.

Ch 3 (counts as the first dc). 3 dc in the next ch-3 sp, dc in the next sc 6 times. Turn.
(25 dc: 7 dc worked one into each sc + 18 dc worked into the spaces.)

Checkpoint: The fan measures 3 in (7.6 cm) wide and 1.5 in (3.8 cm) tall from the stalk tip. Don’t fasten off. Go straight on to the Border (scallop edge) below.

Strand Assembly (Cream, Bottom Up)

Tail: Leave a 6 in (15.2 cm) tail and ch 6. This makes the 1.25 in (3.2 cm) bottom tail, and the 6th ch is Node 1.

Node 1: Work a Fan Frame angled to the right. Then work a second Fan Frame from the same node, angled to the left. (2 frames.)

Stem: Ch 12 for the next node.

Nodes 2–13: Repeat the Node 1 pair and Ch 12 twelve more times. After Node 13, ch 12 for the top node.
(13 nodes with pairs = 26 frames. Stem from the bottom to the top node: 6 ch + 13 × 12 ch = 162 ch, which is 33.75 in, or 85.7 cm.)

Top node: Ch 4 for the stalk, then work 7 Spokes pointing straight up, then work the 4-sl-st return. (Total: 27 frames.)

Upper stem and loop: Ch 12. These chains run up behind the top fan. Then ch 8 and sl st in the 8th ch from the hook to close the hanging loop. Fasten off and weave the end down through the stem.

Checkpoint: Lay the strand flat. It should measure 37 in (94.0 cm) from the end of the tail to the top of the loop.

Add the yellow Rows 1–2 and the Border to all 27 frames.

Make All Pieces

Make 8 strands, each with 27 fans.

  • Cream: 8 complete stems and frames, using about 57.5 m (63 yd) per strand
  • Yellow: 216 fan bodies (8 × 27), using about 4.3 m (4.7 yd) per fan

Layout, front view (Y = single top fan, YY = paired fans, o = loop):

         S1  S2  S3  S4  S5  S6  S7  S8
Loop     o   o   o   o   o   o   o   o
Top      Y   Y   Y   Y   Y   Y   Y   Y
Tier 13  YY  YY  YY  YY  YY  YY  YY  YY
 ...     (Tiers 12 to 2 repeat)
Tier 1   YY  YY  YY  YY  YY  YY  YY  YY
Tail     |   |   |   |   |   |   |   |

To save weaving time, work over the yellow starting tail in Row 1 and over the yellow ending tail as you weave it into the back of Row 2.

Joining (Hanging on the Rod)

The strands aren’t stitched to each other. That’s what keeps the curtain airy and lets people walk through it. The only join is each loop going over the rod.

Method: Slide each 8-ch loop onto the rod. If your rod has fixed ends, use a lark’s head instead: pass the loop behind the rod, bring the strand up through the loop, and pull it snug.

Spacing logic: Every strand spans 7 in (17.8 cm) across its pair of fans, so spacing the loops 7 in (17.8 cm) apart center to center lets the fan tips of neighboring strands just meet without overlapping. With 8 strands, the 7 gaps between loop centers add up to 49 in (124.5 cm). Add 3.5 in (8.9 cm) for the outer half-span at each end, and the total is 56 in (142.2 cm).

Tension: Leave each loop loose on the rod so the strand hangs straight under its own weight. Don’t twist the loop.

Size checkpoint: Measure from the outer fan tip of S1 to the outer fan tip of S8. It should be 56 in (142.2 cm). Mark the loop positions on the rod with tape before you hang the strands.

Border: Scalloped Fan Edge (Yellow Row 3)

Work this border on every fan right after Row 2, using the same yarn.

Border gauge: One scallop is about 0.6 in (1.5 cm) wide along the outer arc.

Row 3: Ch 1 and turn. Sc in the first dc. (Sk 1, 5 dc in the next dc, sk 1, sc in the next dc) 6 times. The last sc goes into the top of the turning ch-3. Fasten off.
(37 sts: 7 sc + 30 dc, making 6 scallops.)*

Why the math works: Each scallop repeat uses exactly 4 stitches of Row 2 (sk, 5-dc st, sk, sc). The opening sc uses 1 stitch, so 1 + (6 × 4) = 25, which matches Row 2’s count exactly. The scallops start and end with a sc anchored on the outer spokes (Spoke 1 and Spoke 7). That keeps both fan sides straight.

Checkpoint: The fan measures 3.5 in (8.9 cm) wide × 2 in (5.1 cm) tall. The border adds 0.25 in (0.6 cm) to each side and 0.5 in (1.3 cm) to the top.

Final Blocking

  1. Weave in all ends first, but don’t trim them yet.
  2. Lay one strand flat on the blocking board.
  3. Pin the stem straight, 37 in (94.0 cm) from the tail to the loop.
  4. Angle each pair of fans up and out at about 45°, with the arc tips 7 in (17.8 cm) apart.
  5. Pin each fan at the tips of Spokes 1 and 7 and at the center scallop, so it measures 3.5 in (8.9 cm) × 2 in (5.1 cm).
  6. Spray until damp, not soaked.
  7. Let the strand dry completely, then trim the ends.
  8. Repeat for all 8 strands.

Final Quality-Control Checklist

  • [ ] 8 strands, each 37 in (94.0 cm) long
  • [ ] 27 fans per strand: 1 top fan + 13 pairs
  • [ ] Each fan has 7 spokes, 25 dc in Row 2, and 6 scallops in Row 3
  • [ ] Each fan measures 3.5 in (8.9 cm) × 2 in (5.1 cm)
  • [ ] Every stem section is 12 ch, 2.5 in (6.4 cm)
  • [ ] All ends are woven in and trimmed
  • [ ] Loops are 7 in (17.8 cm) apart, and the total width is 56 in (142.2 cm)

Troubleshooting

Fan curls into a cup: Row 2 is too tight. Go up 0.25 mm for the yellow rows only.

Fan ruffles: The ch-3 spaces are too loose. Use ch 2 in Row 1 and 3 dc per space, or block the fan harder.

Spokes are uneven in length: Count 5 sl st on every spoke and keep the sl st loose enough to see.

Strands twist while hanging: Block the strands again and check that every loop is closed in the same direction.

Strand is too long: Your stem chain is loose. Check 12 ch against 2.5 in (6.4 cm) and use ch 11 between nodes if you need to.

Scallops won’t sit flat: Check that you skipped exactly 1 stitch on each side of every 5-dc group.

Care

Hand wash cold and lay flat to dry, pinned back to the blocked shape. Shake gently or dust with a cool hairdryer between washes.

Three crocheted bookmarks with golden shell motifs hang from a wooden rod in front of a sunlit window.

Final Notes

The measurements build on each other:

  • 7 spokes of 1 in (2.5 cm)
  • 25 dc fan body, 3 in (7.6 cm) wide
  • 37-st scalloped border, bringing the fan to 3.5 in (8.9 cm)
  • 12-ch stem sections of 2.5 in (6.4 cm)
  • 14 tiers per 37 in (94.0 cm) strand
  • 8 strands spaced 7 in (17.8 cm) apart, for a 56 in (142.2 cm) curtain

If your test fan and test stem section match the gauge, the rest of the curtain will come out to size. For a taller doorway, add pairs: each extra tier adds 2.5 in (6.4 cm).

Happy crocheting!

Leave a Comment