Lavender Heartline Hanging Toilet Paper Basket Crochet Pattern

This oval hanging basket holds two toilet paper rolls side by side and hangs from a towel bar or wall rod by two cream straps. A ring of open lavender hearts runs all the way around the wall, framed by solid cream bands and a scalloped top edge.

The palette is two colors: cream for the base, wall bands, scallops and straps, and soft lavender for the hearts. It’s a cottage-style piece that’s useful and pretty at the same time, and it’s a good way to use up cotton yarn.

The pattern uses US crochet terms. The finished basket measures 10.25 in long x 4.75 in wide x 4.25 in tall (26.0 x 12.1 x 10.8 cm). Each strap is 12 in (30.5 cm) long and 1.25 in (3.2 cm) wide.

Construction is simple. You crochet a flat oval base, turn the wall up with a back-loop round, and work a lavender chain-and-cover band that makes the hearts. Then you lock everything in place with cream rounds and scallops. Finally you work the straps straight off the inside of the rim, so there are no separate pieces to sew together.

Finished Size and Construction

  • Finished size: 10.25 x 4.75 x 4.25 in (26.0 x 12.1 x 10.8 cm)
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4), cotton
  • Hook: 4.0 mm (US G-6)
  • Number of pieces: 1 (the straps are worked directly from the rim)
  • Layout: Oval, with 13 heart repeats around the wall
  • Base size: 10.25 x 4.75 in (26.0 x 12.1 cm)
  • Size before border (after Rnd 18): 10.25 x 4.75 x 3 in (26.0 x 12.1 x 7.6 cm)
  • Border depth: 1.25 in (3.2 cm)

Materials

Use a smooth, firm 100% cotton or cotton blend in worsted weight. Cotton holds its shape under the weight of the rolls and copes well with bathroom humidity. Avoid fuzzy or very stretchy yarns, because they blur the heart outlines.

  • Cream: 100 g / about 170 m (186 yd)
  • Lavender: 30 g / about 51 m (56 yd)

These quantities include a margin of roughly 20%.

Tools:
– 4.0 mm (US G-6) crochet hook
– 6 stitch markers
– Tapestry needle
– Scissors
– Rust-proof pins and a blocking mat or towel
– Tape measure

Abbreviations (US Terms)

  • ch – chain
  • sc – single crochet
  • dc – double crochet
  • sl st – slip stitch
  • sk – skip
  • st(s) – stitch(es)
  • sp – space
  • BLO / FLO – back loop only / front loop only
  • inc – 2 sc in the same st
  • Rnd – round

Special stitch: Shell. Work 5 dc in the same stitch.

Gauge and Checkpoints

Gauge: 16 sc x 18 rnds = 4 in (10.2 cm) in sc. That’s 4 sc per inch.

Because this is a single piece, the base is your test piece. Work Rnds 1–5 and measure before you continue.

  • After Rnd 5: about 8 x 2.5 in (20.3 x 6.4 cm)
  • After Rnd 10: 10.25 x 4.75 in (26.0 x 12.1 cm), with a 26 in (66.0 cm) perimeter
  • After Rnd 14: wall height about 0.9 in (2.3 cm)
  • After Rnd 18: total height about 3 in (7.6 cm) with the heart band lifted gently
  • After Rnd 22: total height 4.25 in (10.8 cm)

If your base is too big, go down half a hook size. If it’s too small, go up half a size. If the base cups or ruffles, check your round counts before you change hooks. A base that measures 0.25 in (0.6 cm) too wide will still fit the rolls, but a base that’s too narrow will not.

Close-up of crocheted fabric with cream and lavender yarn forming a textured heart pattern.

Pattern

All rounds are joined with a sl st to the first sc. The ch 1 at the start of a round does not count as a stitch.

Oval Base (Cream)

The base has two straight sides of 22 sts each and two curved ends that grow by 3 sts per round.

Ch 25.

Rnd 1: 3 sc in 2nd ch from hook, sc in next 22 ch, 3 sc in last ch. Working along the other side of the foundation chain, sc in next 22 ch. Join. (50 sts)

Rnd 2: Ch 1. [2 sc in each of next 3 sts, sc in next 22] twice. Join. (56 sts)

Rnd 3: Ch 1. [(sc in next st, inc) 3 times, sc in next 22] twice. Join. (62 sts)

Rnd 4: Ch 1. [(sc in next 2 sts, inc) 3 times, sc in next 22] twice. Join. (68 sts)

Rnd 5: Ch 1. [(sc in next 3 sts, inc) 3 times, sc in next 22] twice. Join. (74 sts)

Checkpoint: 8 x 2.5 in (20.3 x 6.4 cm).

Rnd 6: Ch 1. [(sc in next 4, inc) 3 times, sc in next 22] twice. Join. (80 sts)

Rnd 7: Ch 1. [(sc in next 5, inc) 3 times, sc in next 22] twice. Join. (86 sts)

Rnd 8: Ch 1. [(sc in next 6, inc) 3 times, sc in next 22] twice. Join. (92 sts)

Rnd 9: Ch 1. [(sc in next 7, inc) 3 times, sc in next 22] twice. Join. (98 sts)

Rnd 10: Ch 1. [(sc in next 8, inc) 3 times, sc in next 22] twice. Join. (104 sts)

Each curved end now has 30 sts and each straight side has 22: 30 + 22 + 30 + 22 = 104. The base measures 10.25 x 4.75 in (26.0 x 12.1 cm).

Lower Wall (Cream)

Rnd 11: Ch 1, sc in BLO of each st around. Join. (104 sts) This makes the turning ridge, and the wall starts to rise.

Rnds 12–14: Ch 1, sc in each st around. Join. (104 sts each)

Using Rnd 10’s layout, the straight sides are sts 31–52 (front) and sts 83–104 (back). Fasten off cream.

Heart Band (Lavender)

The hearts come from two pairs of rounds. Rnds 15–16 make the V-shaped lower sides of the hearts. Rnds 17–18 make the arched tops. The cream rounds that follow pull each top down into two lobes.

Each heart repeat is 8 sts of Rnd 14, which is 2 in (5.1 cm) wide. 13 repeats x 8 sts = 104.

Rnd 15: Join lavender with sc in any st. This sc is a heart point. Ch 13, sk 7 sts. Sc in next st, ch 13, sk 7 sts; repeat from * 11 more times. Join. (13 sc, 13 ch-13 loops)

Rnd 16: Work 15 sc in next ch-13 loop, sl st in next sc; repeat from * around. The last sl st lands in the first sc of Rnd 15. (195 sc, 13 sl sts)

Each covered loop is a chunky cord. Its center stitch (the 8th sc) becomes the apex, where the lobes of two neighboring hearts meet.

Rnd 17: Sl st in each of the next 8 sc, so you’re in the 8th sc of the first loop. Ch 1, sc in the same st. Ch 14. Sc in 8th sc of next loop, ch 14; repeat from * 11 more times. Join. (13 sc, 13 ch-14 arches)

Each arch spans from one apex to the next, directly above a heart point.

Rnd 18: Work 16 sc in next ch-14 arch, sl st in next sc; repeat from * around. (208 sc, 13 sl sts)

Fasten off lavender. At this stage the band looks floppy and the arches are smooth curves. That’s expected.

Border

The border has two jobs: it squeezes the heart tops into lobes, and it brings the stitch count back to 104.

Border gauge: 4 sc per inch, the same as the base. Rnd 20 must measure 26 in (66.0 cm) around, the same as the base perimeter. That keeps the walls straight instead of flaring or pulling in.

The basket has no corners, so the border is counted per heart repeat (8 sts) instead of per side.

Rnd 19 (cream): Join cream with sc in the 5th sc of any covered arch. Ch 3, sc in 12th sc of the same arch, ch 3. Sc in 5th sc of next arch, ch 3, sc in 12th sc of same arch, ch 3; repeat from * 11 more times. Join. (26 sc, 26 ch-3 sps; 2 sc + 2 ch-3 sps per heart)

The 5th and 12th sc are the lobe tops. Between them, 6 sc (the 6th through 11th) are left unworked. They span only one ch-3 space, so they sag into the dip at the top center of the heart. Between hearts, the unworked sc dip down to the apex. This is what gives the heart its two rounded lobes.

Rnd 20 (conversion round): Ch 1. Sc in next sc, 3 sc in next ch-3 sp; repeat from * around. Join. (26 + 78 = 104 sts)

That’s 26 sts worked one per existing sc, plus 78 sts added (3 in each of the 26 spaces). Each heart repeat is back to 8 sts.

Rnd 21: Ch 1, sc in each st around. Join. (104 sts)

Before you continue, lay the basket flat with the long sides at front and back. On each long side, find the st where the straight side meets the curve at each end. Mark 5 sts from there, moving toward the center. That’s 4 marked groups: front-left, front-right, back-left and back-right.

Rnd 22 (scallops): Ch 1. Working in FLO only: sc in next st, sk 1, shell in next st, sk 1; repeat from * around. Join. (26 sc, 26 shells; 2 scallops per heart)

That’s 4 sts per repeat, and 26 x 4 = 104. The back loops of Rnd 21 stay free on the inside for the straps. Fasten off.

Why the math works: 13 hearts x 8 sts = 104 in Rnd 14. Rnd 19 anchors at 2 points per heart, which gives 26 sc. Rnd 20 restores 26 + 78 = 104. Rnd 22 divides 104 by 4 to get 26 scallops. Every repeat lines up with the hearts.

Straps (make 2, worked from the rim)

Row 1: With the inside of the basket facing, join cream in the free back loop of the first marked st on the front-left group. Ch 1, sc in the same loop and in the next 4 free back loops. Turn. (5 sc)

Rows 2–54: Ch 1, sc in each st across. Turn. (5 sc)

The strap measures 12 in (30.5 cm) long and 1.25 in (3.2 cm) wide. Fasten off, leaving a 12 in (30.5 cm) tail.

Repeat on the front-right group.

To attach a strap, pass it over the rod (or plan to slide the rod through later). Whipstitch its end to the free back loops of the back group at the same end. Check that the strap isn’t twisted. If your bar can’t be removed, sew the straps closed around it.

Final Blocking

  1. Weave in all ends on the inside, following the stitch direction.
  2. Wet the basket in cool water and squeeze it out gently in a towel. Don’t wring it.
  3. Stuff it firmly with a towel, or with two rolls inside a plastic bag, so the walls stand at 4.25 in (10.8 cm).
  4. Pin each heart’s top center dip down slightly and pin each apex so it lines up with the dips. This sharpens the lobes.
  5. Pin the scallops so each one fans evenly.
  6. Lay the straps flat at 12 in (30.5 cm) and let everything dry completely.

Final Quality-Control Checklist

  • The base lies flat and measures 10.25 x 4.75 in (26.0 x 12.1 cm)
  • There are 13 hearts, evenly spaced, all point-down
  • Every heart has two lobes and an open center
  • Rnds 20 and 21 each have 104 sts
  • There are 26 scallops, two per heart
  • Both straps are 12 in (30.5 cm) long and untwisted
  • Both straps are sewn securely through all 5 stitches
  • All ends are woven in invisibly

Troubleshooting

  • The base cups: You’ve missed increases. Recount against the stitch totals.
  • The base ripples: You have extra stitches, or your tension is loose. Rip back to the last correct count.
  • The hearts look like plain arches: In Rnd 19, check that you’re working into the 5th and 12th sc, not into stitches closer to the center.
  • The heart band is too short: Your chains are too tight. Chain a little more loosely, or use a 4.5 mm hook for the chains only.
  • The scallops crowd together: Check that you skip 1 st on each side of every shell.
  • The basket sags forward: Move the straps 1 to 2 sts closer to the ends.

Care

Hand wash in cool water, reshape, and dry flat with the basket stuffed. Don’t tumble dry.

Crocheted cream and lavender heart toilet paper holder with rope handles mounted on wooden bathroom rod.

Final Notes

The measurement chain is simple:

  • 4 sc per inch gives a 104-stitch base with a 26 in (66.0 cm) perimeter, measuring 10.25 x 4.75 in (26.0 x 12.1 cm).
  • The 13 heart repeats of 8 sts bring the basket to 3 in (7.6 cm) tall.
  • The 1.25 in (3.2 cm) border brings it to 4.25 in (10.8 cm).
  • The two 12 in (30.5 cm) straps hang it from any rod.

Check each stage, and the finished basket will fit two rolls neatly.

Happy crocheting!

Leave a Comment