Violet Lattice Two-Tier Hanging Toilet Paper Holder Crochet Pattern

This hanging holder stores two spare toilet rolls in a pair of open, lacy baskets stacked one above the other. Each basket has a mint diamond lattice wall, a wavy lilac rim, and two dark purple flowers with long pointed petals.

The palette is soft and fresh: mint green for the structure, dark purple for the flowers and a thin rim line, and lilac for the scalloped top edge. The style is light and decorative, but the solid base and bottom band keep each basket firm.

This pattern uses US crochet terms. Each finished basket measures 5.75 in (14.6 cm) across and about 5.75 in (14.6 cm) tall at the wave peaks. The full holder hangs about 19 in (48.3 cm) from the ring to the bottom of the lower basket.

Construction is simple and modular. For each basket you crochet a round base, a flat lattice wall panel, and two flowers. The panel is seamed into a tube and joined to the base with a stitch-to-stitch border round. Two straps then connect both baskets to a metal ring.

Finished Size and Construction

  • Basket size: 5.75 in (14.6 cm) diameter x 5.75 in (14.6 cm) tall at the peaks
  • Total hanging length: about 19 in (48.3 cm), plus the ring
  • Skill level: Intermediate
  • Terminology: US terms
  • Yarn weight: Worsted (weight 4) cotton
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 10 crocheted pieces (2 bases, 2 wall panels, 4 flowers, 2 straps)
  • Layout: 2 baskets stacked vertically, 2 in (5.1 cm) apart, on 2 straps
  • Wall panel size: 18 in (45.7 cm) long x 5.5 in (14.0 cm) tall at the peaks
  • Size before border: base 5.75 in (14.6 cm) across, wall 5.5 in (14.0 cm) tall
  • Border depth: about 0.4 in (1.0 cm)

Materials

Choose a smooth mercerized or combed cotton in worsted weight. Cotton holds the lattice shape and won’t stretch out under the weight of a roll. Avoid fuzzy acrylic, because it hides the diamond pattern.

  • Mint (Color A): 200 g / about 340 m
  • Dark purple (Color B): 60 g / about 102 m
  • Lilac (Color C): 30 g / about 51 m

Quantities include a margin of about 15% for gauge swatches and small differences in tension.

Tools:

  • 4.5 mm (US 7) crochet hook
  • One 2 in (5.1 cm) metal ring, gold or brass
  • Tapestry needle
  • Stitch markers (at least 6)
  • Scissors and measuring tape
  • Rustproof pins and a blocking mat
  • Optional: a wall hook, screws, and wall plugs for hanging

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • dtr – double treble crochet (yo 3 times, insert, pull up loop, [yo, pull through 2] 4 times)
  • st(s) – stitch(es)
  • sk – skip
  • sp – space

Special stitch – Petal point: dtr, ch 3, sl st in the top of the dtr just made. This creates the sharp tip of each petal.

Gauge and Checkpoints

Gauge: 16 sc and 18 rows = 4 in (10.2 cm) in sc.

Make one complete base and one wall panel before you make the second set. These two pieces must match exactly, because they are joined stitch to stitch.

Checkpoints:

  • Base after Round 6: 2.9 in (7.4 cm) across
  • Base after Round 12: 5.75 in (14.6 cm) across
  • Wall panel Row 1: 18 in (45.7 cm) long
  • Wall panel after Row 12: about 4.4 in (11.2 cm) tall
  • Wall panel after Row 13: about 4.65 in (11.8 cm) tall
  • Flower: 3.75 in (9.5 cm) from petal tip to petal tip

If your pieces are too big, go down to a 4 mm hook. If they are too small, go up to a 5 mm hook. Never change the stitch counts, because the base and panel must both stay at 72 sts.

Detailed view of a purple crocheted six-petaled flower appliqué on green mesh lattice crochet background.

Base (Make 2)

Use Color A. Work in continuous rounds, placing a marker in the first st of each round.

Round 1: Make a magic ring, ch 1, 6 sc in ring. (6 sts)

Round 2: 2 sc in each st around. (12 sts)

Round 3: Sc in next st, 2 sc in next st 6 times. (18 sts)

Round 4: Sc in next 2 sts, 2 sc in next st 6 times. (24 sts)

Round 5: Sc in next 3 sts, 2 sc in next st 6 times. (30 sts)

Round 6: Sc in next 4 sts, 2 sc in next st 6 times. (36 sts)

Checkpoint: 2.9 in (7.4 cm) across.

Rounds 7–12: Keep increasing 6 sts per round, working 1 more sc between increases each round. Shift where the increases fall every other round so the circle stays round instead of turning hexagonal.

  • Round 7: 42 sts
  • Round 8: 48 sts
  • Round 9: 54 sts
  • Round 10: 60 sts
  • Round 11: 66 sts
  • Round 12: 72 sts

Fasten off. Checkpoint: 5.75 in (14.6 cm) across, lying flat.

Wall Panel (Make 2)

The panel is worked flat in rows, then seamed into a tube. Its width matches the base: 72 sts.

Row 1 (Color A): Ch 73, sc in 2nd ch from hook and in each ch across, turn. (72 sts)

Checkpoint: 18 in (45.7 cm) long.

Row 2 (Lattice A): Ch 1, sc in first st, ch 5, sk 3 sts, sc in next st 17 times, ch 5, sk 2 sts, sc in last st, turn. (18 ch-5 loops)

Row 3 (Lattice B): Ch 5 (counts as dc + ch 2), sc in first ch-5 loop, ch 5, sc in next ch-5 loop 17 times, ch 2, dc in last sc, turn. (17 full loops + 2 half loops)

Row 4 (Lattice A): Ch 1, sc in first dc, ch 5, sc in next ch-5 loop 17 times, ch 5, sc in 3rd ch of turning ch, turn. (18 loops)

Rows 5–12: Repeat Rows 3 and 4 four more times. That gives 11 lattice rows (Rows 2–12), ending with a Lattice A row.

Checkpoint: about 4.4 in (11.2 cm) tall. Each lattice row adds about 0.375 in (1.0 cm).

Row 13 (Conversion row): Ch 1, sc in first sc, 3 sc in next ch-5 loop, sc in next sc 17 times, 2 sc in last loop, sc in last sc, turn. Count: 19 sc worked into sc + 53 sc worked into loops (17 x 3 + 2) = 72 sts.

Checkpoint: about 4.65 in (11.8 cm) tall. Fasten off Color A.

Row 14 (Color B): Join Color B in first st. Ch 1, sc in each st across, turn. (72 sts) Fasten off.

Row 15 (Color C, wave row): Join Color C. Ch 1, sc in next st, hdc in next st, dc in next st, tr in next 2 sts, dc in next st, hdc in next st, sc in next st 9 times, turn. (72 sts: 9 waves of 8 sts)

Row 16 (Color C): Ch 1, sc in each st across, following the curve of the waves. (72 sts) Fasten off and weave in ends.

The tr pairs form the 9 crests of the scalloped rim. The rim adds about 0.85 in (2.2 cm) at the peaks, bringing the panel to 5.5 in (14.0 cm).

Flowers (Make 4)

Use Color B. Each flower has 6 pointed petals.

Round 1: Magic ring, ch 3 (counts as dc), 11 dc in ring, sl st to top of ch 3. Pull the ring snug but leave a small open center. (12 sts)

Round 2: Ch 1, sc in same st, ch 7, sk 1 st, sc in next st 5 times, ch 7, sk 1 st, sl st to first sc. (6 ch-7 loops)

Round 3: In each ch-7 loop work: sc, hdc, dc, 2 tr, petal point, 2 tr, dc, hdc, sc. Sl st to first sc. (6 petals, each 10 sts plus the point)

The chain loop running through each petal makes a faint vein down the middle. Each petal is about 1.4 in (3.6 cm) long. Checkpoint: 3.75 in (9.5 cm) across. Fasten off, leaving a 12 in (30.5 cm) tail for sewing.

Straps (Make 2)

Use Color A.

Row 1: Ch 7, sc in 2nd ch from hook and in each ch across, turn. (6 sts)

Rows 2–99: Ch 1, sc in each st across, turn. (6 sts)

Checkpoint: 1.5 in (3.8 cm) wide x 22 in (55.9 cm) long. Fasten off, leaving a 12 in (30.5 cm) tail.

Make All Pieces

Totals:

  • Color A: 2 bases, 2 wall panel bodies (Rows 1–13), 2 straps, 2 bottom borders
  • Color B: 4 flowers, 2 rim lines (Row 14)
  • Color C: 2 wave rims (Rows 15–16)

Layout grid (front view, as hung):

            [ RING ]
            /      \
       strap        strap      5.5 in (14.0 cm) free
         |  TOP BASKET  |      5.75 in (14.6 cm)
         |   (flower)   |
         |              |      2 in (5.1 cm) gap
         | LOWER BASKET |      5.75 in (14.6 cm)
         |   (flower)   |
          \____base____/       strap ends tucked under

Joining

Step 1 – Side seam. Fold one wall panel into a tube with the right side out. Match Row 1 to Row 1 and Row 16 to Row 16. With Color A, whipstitch the row ends together, one row end to one row end, and keep the seam flat. The tube now has 72 sts around its bottom edge.

Step 2 – Markers. Place markers on the base at sts 1, 19, 37, and 55. Place matching markers on the bottom edge of the tube, counting the stitch next to the seam as st 1. This divides both pieces into 4 sections of 18 sts.

Tension advice: Keep the seam and joining stitches at the same tension as the rest of the work. A tight join pulls the wall inward and narrows the basket.

Checkpoint: the tube should measure about 18 in (45.7 cm) around at Row 1, matching the base edge.

Border

The border joins the wall to the base and forms the solid mint band at the bottom.

Border gauge: 4 sc = 1 in (2.5 cm), the same as the body gauge.

Border Round 1 (joining round, Color A): Hold the base under the tube with wrong sides together. Join Color A at the seam. Ch 1, then sc in each st around, working each sc through both a base Round 12 st and the matching panel Row 1 foundation loop. Check the markers as you go: 18 sts per section. Sl st to first sc. (72 sts)

Border Round 2: Ch 2, hdc in each st around, sl st to first hdc. (72 sts)

Why the math works: The base has 72 sts and the panel has 72 sts. Joining them 1 to 1 gives 72 sts, with no extra sts at the seam. At 4 sts per inch, 72 sts is 18 in (45.7 cm) around, and 18 ÷ 3.1416 = 5.73 in, which rounds to 5.75 in (14.6 cm) across. The 4 marked sections of 18 sts each keep the wall square to the base.

Attach the flowers. Pin one flower centered on the front (between panel sts 29 and 44) and one centered over the side seam. Keep each flower within Rows 1–13. Use the tail to sew around each petal edge and through the center ring.

Attach the straps. Wrap 1.5 in (3.8 cm) of each strap around the ring and sew it down. Measure 5.5 in (14.0 cm) of free strap. Then sew one strap flat to the top basket over panel sts 16–21 and the other over sts 52–57, from rim to border. Leave a 2 in (5.1 cm) gap, then sew both straps to the lower basket the same way. Tuck the last 1.5 in (3.8 cm) under the lower base and sew it to the base.

Final Blocking

  1. If possible, wet-block the bases, panels, and flowers before joining. Otherwise, block the finished baskets.
  2. Soak in cool water for 10 minutes, then gently press out the water in a towel.
  3. Pin each flower flat, pulling every petal point out to 3.75 in (9.5 cm) across.
  4. Fill each basket with a toilet roll wrapped in a plastic bag so the walls dry straight.
  5. Shape the 9 rim waves with your fingers so each crest stands evenly.
  6. Let everything dry fully before hanging.

Final Quality-Control Checklist

  • Both bases measure 5.75 in (14.6 cm) across.
  • Both panels have 72 sts in Rows 1, 13, 14, 15, and 16.
  • Each rim shows 9 even waves.
  • All 4 flowers have 6 sharp petal points.
  • Both straps are 22 in (55.9 cm) long.
  • Both baskets hang level, with a 2 in (5.1 cm) gap between them.
  • All tails are woven in and secure.

Troubleshooting

Base curls up: You’re missing increases or crocheting too tightly. Recount the stitches or go up a hook size.

Base ruffles: You have too many stitches or your tension is loose. Recount each round.

Lattice slants: Make sure you alternate Lattice A and B rows exactly, with half loops only on B rows.

Wall gathers at the join: The base and panel counts differ. Both must be 72.

Waves look flat: Work the tr stitches to their full, relaxed height.

Baskets tilt: The straps are sewn at uneven heights. Re-measure from the ring.

Care

Hand wash in cool water with mild soap and lay flat to dry, reshaping each basket over a roll. Don’t tumble dry, because heat can shrink the cotton and distort the lattice.

Mint green crocheted toilet paper organizer with purple flowers hanging from brass hardware in a bright bathroom.

Final Notes

The whole project depends on one simple measurement chain. A 72-st base measures 5.75 in (14.6 cm) across. A 72-st panel measures 18 in (45.7 cm) long and joins to the base stitch to stitch. The panel reaches 4.65 in (11.8 cm) after the conversion row, 5.5 in (14.0 cm) with the wave rim, and about 5.75 in (14.6 cm) with the border. Two 22 in (55.9 cm) straps hold both baskets in a 19 in (48.3 cm) column.

Check each stage against these numbers and the baskets will hold standard rolls neatly.

Happy crocheting!

Leave a Comment