This hanging holder is three round baskets stacked one above the other on two dark green straps. Each basket has a solid green base, an open diamond-mesh wall and a ring of mint-green flowers with cream centers. A cream shell scallop finishes every rim. It holds three standard rolls and hangs from a ring on a wall hook.
The colors are deep forest green, soft mint and warm cream. The mesh is light enough to show the rolls inside. The solid base and lower band keep each basket firm.
This pattern uses US crochet terms. Each basket is 6 in (15.2 cm) across and 4.25 in (10.8 cm) tall. The assembled holder hangs 23 in (58.4 cm) from the ring to the bottom of the lowest basket.
You’ll crochet each basket in one piece, working continuously from the base up into the wall. The flowers are made separately and sewn onto the mesh. Then you crochet the cream rim directly onto the wall. Last, you sew two flat straps up the sides of the baskets and fold the strap ends around a ring.
Finished Size and Construction
- Finished hanging length: 23 in (58.4 cm), from the ring to the bottom of the lowest basket
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted weight (#4) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 3 baskets, 18 flowers, 2 straps, plus 1 ring
- Layout: 3 baskets stacked vertically, 1.5 in (3.8 cm) apart
- Basket size: 6 in (15.2 cm) diameter × 4.25 in (10.8 cm) tall
- Wall height before border: 3.5 in (8.9 cm)
- Border depth: 0.75 in (1.9 cm)
- Strap size: 26 in (66.0 cm) × 1.25 in (3.2 cm)
Materials
Use a smooth 100% cotton worsted yarn. Cotton holds the basket’s shape, doesn’t fuzz and washes well. Acrylic will make floppier baskets. These amounts are based on cotton that runs about 1.55 m per gram.
- Dark green (A): 170 g, about 264 m (base, walls, mesh, straps)
- Mint (B): 60 g, about 93 m (flower petals)
- Cream (C): 70 g, about 109 m (flower centers, rims)
All quantities include a margin of about 15% for gauge swatches and differences in tension.
Tools:
– 4.0 mm (G-6) crochet hook
– Wooden or metal ring, 2.5 in (6.4 cm) across
– Wall hook or knob with screws and wall anchors
– Tapestry needle
– 6 stitch markers
– Scissors
– Measuring tape
– Rust-proof pins for blocking
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- BLO – back loop only
- sk – skip
- st(s) – stitch(es)
- MR – magic ring
- rep – repeat
Special stitch – Shell: Work 5 dc into the same stitch.
Gauge and Checkpoints
Gauge: 16 sc and 16 rounds = 4 in (10.2 cm) in a flat sc circle or a sc swatch.
Mesh gauge: One ch-5 mesh round adds about 0.5 in (1.3 cm) of height.
Make one complete basket before you start the others. Then check these measurements:
- After base Round 6: The circle measures 3 in (7.6 cm) across.
- After base Round 12: The circle measures 6 in (15.2 cm) across and lies flat.
- After Round 15: The solid green band stands 0.75 in (1.9 cm) tall.
- After Round 21: The wall stands 3.5 in (8.9 cm) tall.
- After the border: The wall stands 4.25 in (10.8 cm) tall, and the circumference is 18 in (45.7 cm).
If the base is too big or ruffles, go down to a 3.75 mm hook. If it’s too small or cups, go up to a 4.5 mm hook. Don’t change stitch counts, because the mesh and border repeats depend on 72 stitches.

Basket (Make 3)
Use A. Work in joined rounds and do not turn. The ch 1 at the start of a round does not count as a stitch.
Base
Round 1: MR, ch 1, 6 sc in ring, sl st to the first sc. (6 sts)
Round 2: Ch 1, 2 sc in each st around, sl st to the first sc. (12 sts)
Round 3: Ch 1, *sc in next st, 2 sc in next st; rep from * around, join. (18 sts)
Round 4: Ch 1, *sc in next 2 sts, 2 sc in next st; rep from * around, join. (24 sts)
Round 5: Ch 1, *sc in next 3 sts, 2 sc in next st; rep from * around, join. (30 sts)
Round 6: Ch 1, *sc in next 4 sts, 2 sc in next st; rep from * around, join. (36 sts)
Checkpoint: 3 in (7.6 cm) across.
Rounds 7–12: Keep increasing by 6 stitches per round. Work one more sc between increases than in the round before. Each round’s total is:
– Round 7: 42 sts
– Round 8: 48 sts
– Round 9: 54 sts
– Round 10: 60 sts
– Round 11: 66 sts
– Round 12: 72 sts
Checkpoint: 6 in (15.2 cm) across and flat.
Solid Wall Band
Round 13: Ch 1, sc in BLO of each st around, join. (72 sts)
Working through the back loops creates the fold where the wall turns up from the base.
Rounds 14–15: Ch 1, sc in each st around, join. (72 sts)
Checkpoint: The band is 0.75 in (1.9 cm) tall.
Mesh Wall
Round 16: Ch 1, sc in the first st. Ch 5, sk 2 sts, sc in next st. Rep from * around to the last 2 sts. Ch 5, sk the last 2 sts, then sl st to the first sc. (24 ch-5 loops)
The count works because 72 ÷ 3 = 24.
Round 17: Sl st in each of the first 3 ch to reach the middle of the first loop. Ch 1, sc in the same loop. Ch 5, sc in the next ch-5 loop. Rep from * 22 more times. Ch 5, sl st to the first sc. (24 ch-5 loops)
Rounds 18–20: Rep Round 17. (24 ch-5 loops each round)
Each sc sits in the middle of the loop below it, so the loops form the diamond pattern. You now have 5 mesh rounds, about 2.5 in (6.4 cm) tall.
Round 21 (conversion round): Sl st in each of the first 3 ch. Ch 1, then work 3 sc in each ch-5 loop around, and join. Fasten off A.
Count: 24 loops × 3 sc = 72 sts. This round is worked into loops instead of stitches, so you get 3 new sc per loop and are back to the original count.
Checkpoint: The wall is 3.5 in (8.9 cm) tall.
Don’t add the border yet. Sew on the flowers first while the rim is still open.
Flowers (Make 18)
Round 1: With C, MR, ch 1, 10 sc in ring, sl st to the first sc. (10 sts) Fasten off C. The center measures about 0.75 in (1.9 cm) across.
Round 2: Join B with a sl st in any sc. Work (hdc, 3 dc, hdc) in the next sc, then sl st in the next sc. Rep from * 4 more times. The last sl st goes into the joining sl st. (5 petals: 25 petal sts + 5 sl sts)
Fasten off and leave a 12 in (30.5 cm) tail. The finished flower measures 2 in (5.1 cm) across.
Each petal is worked into one stitch, with a slip stitch between petals. This makes the rounded five-petal shape around the cream center.
Make All Pieces
For the whole holder, you need:
– Baskets (A + C rim): 3
– Flowers (C center, B petals): 18, which is 6 per basket
– Straps (A): 2
Layout, from top to bottom:
[ RING ]
/ \
strap strap 7.25 in / 18.4 cm free
| [ BASKET 3 ] | 4.25 in / 10.8 cm
| gap | 1.5 in / 3.8 cm
| [ BASKET 2 ] | 4.25 in / 10.8 cm
| gap | 1.5 in / 3.8 cm
| [ BASKET 1 ] | 4.25 in / 10.8 cm
Placing the Flowers
Number the Round 21 sts from 1 to 72, starting at the joining seam. The straps will go over st 1 and st 37, which are exactly opposite each other.
In the mesh, the straps cover loop 1 and loop 13. Place the centers of the flowers on loops 3, 7, 11, 15, 19 and 23. This puts 3 flowers between the straps on each side, spaced 4 loops apart. Center each flower vertically on mesh Round 18.
Pin all 6 flowers in place. Use the B tail to tack each petal tip to the nearest mesh sc or chain. Then add 2 small stitches around the center. Weave in the ends on the inside.
Straps (Make 2)
With A, ch 105.
Row 1: Sc in the 2nd ch from the hook and in each ch across. Turn. (104 sts)
Rows 2–5: Ch 1, sc in each st across. Turn. (104 sts)
Fasten off. The strap measures 26 in (66.0 cm) × 1.25 in (3.2 cm).
Long sc rows tend to stretch. Check the length while the strap lies flat and relaxed.
Joining
Method: Whipstitch with A and a tapestry needle.
Tier positions: Measure along each strap from its bottom end:
– Basket 1: 0 to 4.25 in (0 to 10.8 cm)
– Basket 2: 5.75 to 10 in (14.6 to 25.4 cm)
– Basket 3: 11.5 to 15.75 in (29.2 to 40.0 cm)
The remaining 7.25 in (18.4 cm) leads up to the ring. The last 3 in (7.6 cm) of each strap wraps around the ring.
How to sew the straps:
- Line up the bottom end of strap 1 with the base fold (Round 13) of Basket 1, centered over st 1.
- Whipstitch both long edges of the strap to the wall. Sew through every sc in Rounds 13–15 and every mesh sc along that column. Then sew through st 1 and its 2 neighboring sts in Round 21 and in the border.
- Repeat at st 37 with strap 2.
- Attach Baskets 2 and 3 the same way at their measured positions.
The rims must not tilt. Each basket’s st 1 and st 37 should sit at exactly the same height on both straps.
Tension: Make your whipstitches snug but not tight. If the stitches pull too hard, the mesh puckers and the strap shortens.
Ring: Pass both strap tops through the ring. Fold back 3 in (7.6 cm) of each strap and whipstitch it to itself.
Checkpoint: Hang the holder empty. The distance from the ring to the bottom of Basket 1 is 23 in (58.4 cm).
Work the borders before you join the baskets to the straps. The order is: flowers, then border, then joining.
Border
Border gauge: 4 sc per inch, the same as the body. 72 sts = 18 in (45.7 cm) around.
Round 22: Join C in st 1 of Round 21. Ch 1, sc in each st around, sl st to the first sc. (72 sts: 1 sc in each existing st + 0 added)
Round 23: Ch 1, sc in the first st. Sk 2 sts, shell in next st, sk 2 sts, sc in next st. Rep from * around. On the last repeat, replace the final sc with a sl st into the first sc. (12 shells, 12 sc)
Fasten off and weave in the ends.
Why the math works: Each shell repeat uses 6 stitches, and 72 ÷ 6 = 12, so the repeats close with no partial shell. The sc valleys fall on sts 1, 7, 13 and onward to st 67. Because 1 + (6 × 6) = 37, there is a valley at st 37. That means both straps sit in valleys, and the shells stay complete on both sides.
Border depth: 0.75 in (1.9 cm). The wall height becomes 3.5 + 0.75 = 4.25 in (10.8 cm).
Final Blocking
- Wet each basket, then gently squeeze out the water. Don’t wring it.
- Slide a 6 in (15.2 cm) jar or can inside to shape it.
- Pin each shell into a rounded curve and open up the mesh diamonds evenly.
- Shape the flower petals with your fingers and press them flat against the mesh.
- Lay the straps flat and pin them to 26 in (66.0 cm) × 1.25 in (3.2 cm).
- Let everything dry completely, which takes 24 hours.
- Measure again: 6 in (15.2 cm) across and 4.25 in (10.8 cm) tall per basket.
Final Quality-Control Checklist
- Each base has 72 sts and lies flat.
- Each mesh round has 24 loops, and the diamonds stack evenly.
- Round 21 has exactly 72 sts.
- Each basket has 12 complete shells with no partial repeat.
- There are 6 flowers per basket, evenly spaced, and every petal is tacked down.
- The straps sit at st 1 and st 37 on every basket.
- Each gap between baskets is 1.5 in (3.8 cm).
- The total hanging length is 23 in (58.4 cm), and the rims are level.
- All ends are woven in on the inside.
Troubleshooting
Base cups upward: You skipped an increase or your tension is tight. Count each round’s total and go up a hook size.
Base ruffles: You have extra stitches or your tension is loose. Recount and go down a hook size.
Mesh twists: You missed a loop center in a round. Each round should have exactly 24 loops.
Round 21 count is off: Count the loops in Round 20 before you start. You need 24 loops × 3 sc.
Shells don’t close evenly: Round 22 is not 72 sts. Rip back and recount.
Baskets tilt when hanging: The straps aren’t exactly opposite each other. Re-sew them at st 1 and st 37.
Straps stretch over time: Make the straps 4 rows instead of 5 and pull them firm before sewing. Or line them with grosgrain ribbon.
Flowers droop: Tack each petal tip, not just the center.
Care
Machine wash on a gentle cycle in cool water inside a laundry bag, or hand wash. Reshape the baskets over a jar and let them dry flat.

Final Notes
Everything in this project builds from the 72-stitch base:
– The base is 6 in (15.2 cm) across.
– 72 ÷ 3 = 24 mesh loops, which hold 6 flowers spaced 4 loops apart.
– 24 loops × 3 sc brings Round 21 back to 72 sts.
– 72 ÷ 6 = 12 shells.
– Each basket is 4.25 in (10.8 cm) tall.
– Three baskets plus two 1.5 in (3.8 cm) gaps plus 7.25 in (18.4 cm) of free strap give a 23 in (58.4 cm) hanging length.
If your stitch counts match at each checkpoint, the finished holder will match too.
Happy crocheting!