The Fernwood Basket is a long, low oval basket that hangs from a peg rack and holds three standard toilet rolls side by side. Its walls are an openwork band of fern-like leaf panels separated by solid columns. The top edge rises over each leaf in a soft wave.
The body is worked in a warm peach cotton. A deep forest green outlines the wavy rim and the base edge, and the same green is used for the two hanging straps. Four natural wooden rings finish the straps: one at the top of each strap for the peg, and one on each strap just above the rim.
This pattern uses US crochet terms. The finished basket measures about 14.5 in (36.8 cm) long, 4.75 in (12.1 cm) wide, and 4.5 in (11.4 cm) tall at the leaf peaks.
Construction is simple. You work an oval half double crochet base, then a back-loop round to turn the wall up, then eight leaf-and-column panels in the round. Green edging goes on the rim and the base. Two flat single crochet straps are made separately and sewn to the back wall.
Finished Size and Construction
- Finished basket: 14.5 in (36.8 cm) long x 4.75 in (12.1 cm) wide x 4.5 in (11.4 cm) tall at the peaks, 4 in (10.2 cm) at the dips
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 3 crocheted pieces (1 basket body, 2 straps) plus 4 wooden rings
- Layout: Basket body worked in one piece from the base up; one strap at each back corner
- Wall repeat: 8 panels of 16 stitches = 128 stitches around
- Wall height before border: 3.75 in (9.5 cm)
- Border depth: 2 rounds, adding about 0.75 in (1.9 cm) at the peaks and 0.25 in (0.6 cm) at the dips
- Strap size: 1.5 in (3.8 cm) wide x 13 in (33.0 cm) long, not counting the ring
Materials
Choose a smooth, firm worsted yarn that is 100% cotton or a cotton blend. Cotton holds the basket’s shape and shows the openwork clearly. Avoid fuzzy or very stretchy yarns. They blur the leaf lines and let the basket sag under weight.
- Peach (Color A): 200 g, about 340 m
- Forest green (Color B): 100 g, about 170 m
These amounts include a margin of about 15% for gauge differences and a swatch.
Tools:
- 4.0 mm (G-6) crochet hook
- 4 wooden rings, 1.5 in (3.8 cm) outer diameter
- 4 stitch markers
- Tapestry needle
- Scissors
- Measuring tape
- Pins and a blocking surface
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- BLO – back loop only
- FLO – front loop only
- rev sc – reverse single crochet (crab stitch)
- sk – skip
- sp(s) – space(s)
- st(s) – stitch(es)
- rep – repeat
Special stitches:
- V-st: (dc, ch 1, dc) in the same space.
- Leaf shell: (dc, ch 1, dc, ch 3, dc, ch 1, dc) in the same space. The center ch-3 sp is the leaf’s spine. The two ch-1 sps are where the next branches grow.
- Rev sc: Work from left to right. Insert the hook in the next stitch to the right, yarn over, pull up a loop, yarn over, and pull through both loops.
Gauge and Checkpoints
- Single crochet: 16 sc and 18 rows = 4 in (10.2 cm)
- Half double crochet: 14 hdc and 10 rounds = 4 in (10.2 cm)
- Double crochet: one round is about 0.5 in (1.3 cm) tall
Use the base as your test piece. Work Rounds 1–6 and measure before going further, because every later measurement depends on it.
Checkpoints:
- After Round 1: about 0.8 in (2.0 cm) wide
- After Round 6: 14.5 in (36.8 cm) x 4.75 in (12.1 cm)
- After Round 12: wall about 2.4 in (6.1 cm) tall
- After Round 15: wall 3.75 in (9.5 cm) tall
- Finished strap: 1.5 in (3.8 cm) wide
If your base is too big, go down to a 3.75 mm hook. If it is too small, go up to a 4.5 mm hook. Do not change the stitch counts: the eight panels only fit on a 128-stitch round.

Basket Body
Use Color A.
Base
Ch 38.
Round 1: 5 hdc in 3rd ch from hook (end A), hdc in next 34 ch, 5 hdc in last ch (end B). Rotate and work in the bottom loops of the foundation ch: hdc in next 34 ch. Join with sl st to first hdc. (78 hdc)
The ch-2 at the start of each round does not count as a stitch. Work the first hdc of each round into the same stitch as the join.
Round 2: Ch 2, 2 hdc in each of next 5 sts, hdc in next 34 sts, 2 hdc in each of next 5 sts, hdc in next 34 sts; join. (88 hdc)
Round 3: Ch 2, (hdc in next st, 2 hdc in next st) 5 times, hdc in next 34 sts, (hdc in next st, 2 hdc in next st) 5 times, hdc in next 34 sts; join. (98 hdc)
Round 4: Ch 2, (hdc in next 2 sts, 2 hdc in next st) 5 times, hdc in next 34 sts, (hdc in next 2 sts, 2 hdc in next st) 5 times, hdc in next 34 sts; join. (108 hdc)
Round 5: Ch 2, (hdc in next 3 sts, 2 hdc in next st) 5 times, hdc in next 34 sts, (hdc in next 3 sts, 2 hdc in next st) 5 times, hdc in next 34 sts; join. (118 hdc)
Round 6: Ch 2, (hdc in next 4 sts, 2 hdc in next st) 5 times, hdc in next 34 sts, (hdc in next 4 sts, 2 hdc in next st) 5 times, hdc in next 34 sts; join. (128 hdc)
Each round adds 10 stitches, 5 at each curved end. In Round 6, the stitches fall like this:
- Stitches 1–30: end A
- Stitches 31–64: first long side
- Stitches 65–94: end B
- Stitches 95–128: second long side
Checkpoint: The base lies flat and measures 14.5 in (36.8 cm) x 4.75 in (12.1 cm). The straight section is about 9.7 in (24.6 cm).
Wall Setup
Round 7: Ch 1, sc in BLO of each st around; join to first sc. (128 sc)
This round turns the work upward. It also leaves a ring of unused front loops on the outside, which you’ll use later for the green base trim.
Round 8: Ch 1, sc in each st around; join. (128 sc)
Do not fasten off. To center the panels on the curved ends, sl st in next 7 sts. You are now in stitch 8.
Leaf Panels
Each panel is 16 stitches: a 3-stitch column and a 13-stitch leaf.
Round 9: Ch 3 (counts as dc), dc in next 2 sts, ch 5, sk 6 sts, (dc, ch 3, dc) in next st, ch 5, sk 6 sts. Dc in next 3 sts, ch 5, sk 6 sts, (dc, ch 3, dc) in next st, ch 5, sk 6 sts; rep from * 6 more times. Join to top of ch-3. (8 panels: 40 dc, 16 ch-5 sps, 8 ch-3 sps)*
Each panel uses 3 + 6 + 1 + 6 = 16 stitches of Round 8.
Round 10: Ch 3, dc in next 2 dc, ch 3, leaf shell in next ch-3 sp, ch 3. Dc in next 3 column dc, ch 3, leaf shell in next ch-3 sp, ch 3; rep from * 6 more times. Join. (56 dc, 7 per panel)*
The ch-5 sps from Round 9 are skipped. They become the open windows at the base of each leaf.
Round 11 (leaf round): Ch 3, dc in next 2 dc, ch 1, V-st in first ch-1 sp of leaf shell, leaf shell in center ch-3 sp, V-st in last ch-1 sp of leaf shell, ch 1. Dc in next 3 column dc, ch 1, V-st in first ch-1 sp of leaf shell, leaf shell in center ch-3 sp, V-st in last ch-1 sp of leaf shell, ch 1; rep from * 6 more times. Join. (88 dc, 11 per panel)*
Rounds 12–13: Rep Round 11. In each round, skip the V-sts from the round below and work only into the leaf shell. (88 dc each round)
The skipped V-sts finish as angled branches, and new V-sts grow from the spine. This gives each panel its fern shape.
Checkpoint: After Round 12, the wall is about 2.4 in (6.1 cm) tall from the BLO ridge.
Round 14 (leaf tips): Ch 3, dc in next 2 dc, ch 3, sc in first ch-1 sp of leaf shell, ch 3, 3 dc in center ch-3 sp, ch 3, sc in last ch-1 sp of leaf shell, ch 3. Dc in next 3 column dc, ch 3, sc in first ch-1 sp of leaf shell, ch 3, 3 dc in center ch-3 sp, ch 3, sc in last ch-1 sp of leaf shell, ch 3; rep from * 6 more times. Join. (48 dc, 16 sc, 32 ch-3 sps)*
Round 15: Ch 1. Sc in next 3 column dc, 2 sc in next ch-3 sp, sc in next sc, 2 sc in next ch-3 sp, sc in next 3 dc, 2 sc in next ch-3 sp, sc in next sc, 2 sc in next ch-3 sp; rep from * 7 more times. Join. (128 sc, 16 per panel)*
Per panel: 3 + 2 + 1 + 2 + 3 + 2 + 1 + 2 = 16. Fasten off Color A.
Checkpoint: The wall is 3.75 in (9.5 cm) tall. There are three panels on each long side and one centered on each end.
Straps
Use Color B. Make 2.
Row 1: Make a slip knot on the hook, work 6 sc around one wooden ring, turn. (6 sc)
Rows 2–58: Ch 1, sc in each st across, turn. (6 sc)
Fasten off, leaving a 24 in (61.0 cm) tail for sewing.
Checkpoint: Each strap is 1.5 in (3.8 cm) wide and about 13 in (33.0 cm) long, not counting the ring.
Make All Pieces
- Color A: 1 basket body (Rounds 1–15)
- Color B: 2 straps, plus the rim and base borders on the basket
- Rings: 4 in total. Two are worked into the strap tops, and two are slid onto the straps during joining.
Layout (back view):
[ring] [ring] <- hang on pegs
| |
strap strap
| |
(ring) (ring) <- 9 in / 22.9 cm below top ring
| |
==|=====[ back long side ]========|== <- rim
column 5/6 column 8/1
Joining
Finish the Border section before you attach the straps, so the straps can wrap over the finished rim.
- Slide the second ring onto each strap from the free end and place it 9 in (22.9 cm) below the top ring. Tack it with two small stitches across the strap, one just above and one just below the ring, so it can’t slide.
- Below the ring, 4 in (10.2 cm) of strap remains. Lay 1.75 in (4.4 cm) down the outside of the back wall to the rim. Fold the last 2.25 in (5.7 cm) over the rim to the inside.
- Center one strap on the column between panels 5 and 6, and the other on the column between panels 8 and 1. These columns sit at the back corners, 48 stitches apart, which is 12 in (30.5 cm). Space your pegs to match.
- Using the tail, whipstitch both long edges of the strap to the wall. Match the strap rows to the wall rounds, about two strap rows for each dc round. Sew through the green rim border twice for strength.
Keep your tension firm but not tight; the wall should not pucker under the strap. Check that both lower rings sit at the same height before you weave in the ends.
Border
Border gauge: 16 sts = 4 in (10.2 cm), the same as the wall. The rim measures about 32 in (81.3 cm) around.
Rim Border
Round 1: Join Color B in the first column sc of Round 15. Ch 1. Sc in next 4 sts, hdc in next 2 sts, dc in next 7 sts, hdc in next 2 sts, sc in next st; rep from * 7 more times. Join. (128 sts: 40 sc, 32 hdc, 56 dc)*
Per panel: 4 + 2 + 7 + 2 + 1 = 16. The dc peak sits over each leaf tip. The 5 sc that meet across each column form the dip.
Section counts: end A 16 sts, first long side 48 sts, end B 16 sts, second long side 48 sts. Total 128.
Round 2: Ch 1, rev sc in each st around; join. (128 rev sc) Fasten off.
Base Trim
Turn the basket upside down. Join Color B in any unused front loop of Round 6.
Round 1: Ch 1, sc in FLO of each Round 6 st around; join. (128 sc)
Section counts: end A 30, first long side 34, end B 30, second long side 34. Total 128.
Round 2: Ch 1, rev sc in each st around; join. (128 rev sc) Fasten off.
Why the math works: The base ends at 128 stitches, and the wall keeps 128 through every solid round. 128 divides evenly into 8 panels of 16. Both borders are worked one stitch into each stitch with no increases, so the rim and base edge stay the same length as the wall and lie smooth.
Final Blocking
- Weave in all ends before blocking.
- Soak the basket in cool water and squeeze it gently in a towel.
- Fill the basket firmly to set its shape. Use a folded towel, or three toilet rolls in a plastic bag.
- Pin each leaf peak upward so the wavy rim stands evenly.
- Smooth the straps flat on a towel.
- Let everything dry completely, about 24 hours.
- Measure again: 14.5 in (36.8 cm) long and 4.5 in (11.4 cm) tall at the peaks.
Final Quality-Control Checklist
- Base lies flat with no cupping or ruffling
- 128 stitches in Rounds 6, 7, 8 and 15
- 8 panels, each centered between its two columns
- One panel centered on each curved end
- Rim peaks line up above the leaf tips
- Both straps 13 in (33.0 cm) long and the same width
- Lower rings at the same height
- Straps sewn over the back corner columns
- All ends woven in securely
Troubleshooting
- Base cups upward: Your hook is too small or your tension is tight. Go up a hook size.
- Base ruffles: Your tension is loose. Go down a hook size.
- Panels drift off the ends: Recheck the 7 sl sts before Round 9.
- Wall flares at the leaves: Work the ch-1 sps tightly, or leave out the ch-1 beside each column.
- Rim wave looks flat: Check that all 7 dc are true dc, and pin the peaks during blocking.
- Basket tilts when hung: Set the pegs 12 in (30.5 cm) apart, or re-sew one strap.
Care
Hand wash in cool water and lay flat to dry, reshaping while damp. Do not tumble dry or hang it up wet, because the cotton will stretch.

Final Notes
The measurements build on each other in a simple chain. The 128-stitch base sets the 32 in (81.3 cm) rim, which holds 8 panels of 16 stitches. Both borders match the wall stitch for stitch, and the straps sit 12 in (30.5 cm) apart on the back corners. Get the base right first, and the rest of the basket follows.
Happy crocheting!