Lilac Fan Hanging Basket Crochet Pattern

The Lilac Fan Hanging Basket is a small cylinder basket that hangs from a wall hook and holds one spare toilet roll, or anything else you want off the counter. The sides are open lace made of fans and diamond mesh, so the basket looks light and pretty but still holds its shape.

The body is worked in dusty mauve, and the rim, straps, and hanging ring are in cream. The cream frames the lace and makes the straps stand out against the wall. It is a calm, vintage-looking piece that suits a bathroom, a laundry nook, or a guest room.

This pattern uses US crochet terms. The finished basket measures 5.75 in (14.6 cm) across and 5 in (12.7 cm) tall. From the top of the ring to the bottom of the basket, the hanging basket measures about 12.5 in (31.8 cm).

You start with a flat single crochet circle for the base. You then work up the sides without turning: two solid rounds, five rounds of fan-and-mesh lace, and one round that turns the lace back into solid stitches. Next comes the cream rim. Finally, you make two cream straps, one with a built-in ring, and sew them to the rim.

Finished Size and Construction

  • Finished size: 5.75 in (14.6 cm) diameter × 5 in (12.7 cm) tall
  • Hanging length: about 12.5 in (31.8 cm), ring to base
  • Skill level: Easy-intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 3 (basket body, Strap A with ring, Strap B)
  • Layout: Body in the center, with the two straps meeting at the ring above it
  • Body size before border: 5.75 in (14.6 cm) diameter × 4 in (10.2 cm) tall
  • Border (rim) depth: 1 in (2.5 cm)
  • Strap size: 0.75 in (1.9 cm) wide × 8 in (20.3 cm) long, not counting the ring

Materials

Use a smooth worsted-weight cotton or cotton blend. Cotton holds the lace firmly and doesn’t stretch much under the weight of a roll. Avoid very soft acrylic, which can make the basket sag.

  • Color A – Dusty Mauve: 80 g / 124 m (body)
  • Color B – Cream: 55 g / 85 m (rim, straps, ring)

These amounts are for a cotton of about 1.55 m per gram and include a margin of roughly 20% for your swatch and small tension differences.

Tools:
– 5.0 mm (H-8) crochet hook
– Stitch marker
– Tapestry needle
– Scissors
– Tape measure
– Pins (rust-proof)
– Spray bottle for blocking

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • BLO – back loop only
  • sp – space
  • sk – skip
  • st(s) – stitch(es)
  • rnd – round

Special stitch – Fan: work 7 dc in the same stitch. A fan counts as 7 stitches.

Gauge and Checkpoints

Gauge: 16 sc × 16 rnds = 4 in (10.2 cm) in sc. That works out to 4 sc and 4 rounds per 1 in (2.5 cm).

Before you start, test by working the base (Rnds 1–12) on its own. The base is your swatch. If it is the right size, every round after it will fit.

Checkpoints:
– After Rnd 6 (36 sts): the base measures about 3 in (7.6 cm) across.
– After Rnd 12 (72 sts): the base measures 5.75 in (14.6 cm) across.
– After Rnd 20: the body is 4 in (10.2 cm) tall.
– After the rim: the basket is 5 in (12.7 cm) tall.
– Straps: 8 in (20.3 cm) long after 32 rows.

If your base is too big: change to a 4.5 mm (US 7) hook. If it’s too small: change to a 5.5 mm (I-9) hook. Rework the base until Rnd 12 is within 0.25 in (0.6 cm) of the target.

Dusty rose crocheted fabric with diamond lattice openwork pattern and cream-colored ribbed edging.

Basket Body

Use Color A. Join each round with a sl st to the first sc. The ch 1 at the start of a round never counts as a stitch.

Base

Rnd 1: Make a magic ring, ch 1, work 6 sc into the ring, join. (6 sts)

Rnd 2: Ch 1, 2 sc in each st around, join. (12 sts)

Rnd 3: Ch 1, sc in next st, 2 sc in next st 6 times, join. (18 sts)

Rnd 4: Ch 1, sc in next 2 sts, 2 sc in next st 6 times, join. (24 sts)

Rnd 5: Ch 1, sc in next 3 sts, 2 sc in next st 6 times, join. (30 sts)

Rnd 6: Ch 1, sc in next 4 sts, 2 sc in next st 6 times, join. (36 sts)

Checkpoint: about 3 in (7.6 cm) across.

Rnds 7–12: Keep adding 6 sts per round. Work one more sc between increases in each round than in the round before. Stagger the increases (put the “2 sc” at the start of the repeat every other round) so the circle stays round instead of turning into a hexagon.

  • Rnd 7: 42 sts
  • Rnd 8: 48 sts
  • Rnd 9: 54 sts
  • Rnd 10: 60 sts
  • Rnd 11: 66 sts
  • Rnd 12: 72 sts

Checkpoint: 5.75 in (14.6 cm) across, lying flat. Its circumference is 72 sts ÷ 4 = 18 in (45.7 cm).

Lower Wall

Rnd 13: Ch 1, sc in BLO of each st around, join. (72 sts) The unused front loops make a crisp fold, which turns the work upward.

Rnd 14: Ch 1, sc in each st around, join. (72 sts)

Checkpoint: the solid wall is 0.5 in (1.3 cm) tall.

Lace Section

The lace uses a 12-stitch repeat, worked 6 times around.

Rnd 15 (fans): Ch 1, sc in next st, sk 2 sts, Fan in next st, sk 2 sts, sc in next st, ch 5, sk 5 sts 6 times, join to first sc.

Each repeat uses 12 sts (1 + 2 + 1 + 2 + 1 + 5) and makes 1 sc, 1 Fan, 1 sc, and 1 ch-5 loop. The round has 6 Fans and 6 ch-5 loops.

Rnd 16 (mesh): Sl st in the next 4 sts so you are at the center dc of the first Fan. Ch 1, sc in the same dc, ch 5, sc in next ch-5 loop, ch 5, sc in center dc of next Fan. Repeat around, ending the last repeat with ch 5 and joining to the first sc.

The round has 12 sc and 12 ch-5 loops. These loops make the diamond shapes.

Rnd 17 (offset fans): Sl st into the first ch-5 loop. Ch 1, sc in this ch-5 loop, Fan in next sc (the one that sits in a Rnd 15 loop), sc in next ch-5 loop, ch 5, sk next sc (the one at the Fan center). Repeat around and join.

The round has 6 Fans, 12 sc, and 6 ch-5 loops. The new Fans sit above the Rnd 15 loops, so the rows of fans are offset.

Rnd 18 (mesh): Work as for Rnd 16. (12 sc, 12 ch-5 loops)

Rnd 19 (offset fans): Work as for Rnd 17. (6 Fans, 12 sc, 6 ch-5 loops)

Checkpoint: the lace section is about 2.75 in (7.0 cm) tall, so the wall is about 3.25 in (8.3 cm) above the base fold. Gently stretch the lace upward before you measure.

Conversion Round

Rnd 20: Ch 1, sc in next sc, sc in each of the next 7 dc, sc in next sc, 3 sc in next ch-5 loop 6 times, join.

Count: per repeat, 9 sc are worked one into each existing stitch, plus 3 sc are added in the loop, for 12 per repeat. For the full round, that is (54 sts worked 1-per-stitch) + (18 sts added in loops) = 72 sts.

Checkpoint: the body is 4 in (10.2 cm) tall and still 72 sts, the same as the base. Fasten off Color A.

Make All Pieces

Piece Color Quantity
Basket body (base, wall, lace) A 1
Strap A, with ring B 1
Strap B B 1

The rim (Color B) is worked directly onto the body. See Border below.

Strap A (with ring)

Use Color B.

Row 1: Ch 4, sc in 2nd ch from hook and in the next 2 ch. (3 sts)

Rows 2–32: Ch 1, turn, sc in each st across. (3 sts)

Checkpoint: 8 in (20.3 cm) long, 0.75 in (1.9 cm) wide.

Ring: Don’t turn. Ch 14, then sl st into the first sc of Row 32 to form a loop. Ch 1, work 24 sc over the ch-14 loop, packing them firmly, and sl st into the last sc of Row 32. The ring measures about 1.25 in (3.2 cm) across the outside.

Edging: Sl st loosely along the strap edges, working 1 sl st in each row end down one long side (32), 1 sl st in each st of Row 1 (3), and 1 sl st in each row end up the other side (32). That’s 67 sl sts. Leave the ring unedged. Fasten off and leave a 12 in (30.5 cm) tail.

Strap B

Work Rows 1–32 as for Strap A, without the ring.

Edging: Sl st around all four sides: 32 + 3 + 32 + 3 = 70 sl sts. Fasten off and leave a 12 in (30.5 cm) tail.

The corded edging gives the straps their rope-like edges and stops them from curling.

Text layout (front view):

            ( O )        <- ring on Strap A
            /   \
   Strap A /     \ Strap B
          /       \
   [====== RIM ======]
   [  fan lace body  ]
   [_________________]

Joining

The straps are sewn on with a whipstitch using the Color B tails.

Top join: Lay the top 0.5 in (1.3 cm) of Strap B (Rows 31–32) behind Rows 31–32 of Strap A, right below the ring. Whipstitch around the overlap, so both straps come out of the base of the ring.

Bottom join (stitch-to-stitch): The rim has 72 sts. Mark rim st 1 and rim st 37, which are exactly 36 sts (half the round) apart, so the straps sit on opposite sides.

  • Center Strap A over rim sts 72, 1, and 2. Its 3-st width matches 3 rim sts.
  • Center Strap B over rim sts 36, 37, and 38.
  • Let each strap overlap the outside of the rim by 1 in (2.5 cm), which is the full rim depth (4 rows of strap over 4 rim rounds).
  • Whipstitch down both sides and across the bottom end of each strap.

Tension: Pull each whipstitch just snug. If you pull too hard, the rim will pucker. Stitch through both layers in each stitch so the strap carries the weight, not only the edging.

Checkpoint: Each strap is 7 in (17.8 cm) long from the base of the ring to the top of the rim. The total hanging length is about 12.5 in (31.8 cm).

Border (Rim)

Work the rim before you add the straps. Join Color B in any st of Rnd 20.

Border gauge: 4 sc per 1 in (2.5 cm), and 4 rnds per 1 in (2.5 cm), the same as the base.

Rnd 21: Ch 1, sc in each st around, join. (72 sts)

Rnds 22–24: Ch 1, sc in each st around, join. (72 sts each)

The rim is a round, so it has no corners. Divided into quarters, each quarter has 18 sts (4.5 in / 11.4 cm), and 4 × 18 = 72.

After Rnd 24, finish with an invisible join. The rim is 1 in (2.5 cm) deep.

Why the math works: The base, every solid wall round, and the rim all have 72 sts at the same 4 sts per inch. That makes the same 18 in (45.7 cm) circumference all the way up. The rim can’t flare or pull in, so the basket stays a straight cylinder. Rnd 20 makes up for the open lace by adding exactly 18 sts in the loops, which brings the count back to 72.

Final Blocking

  1. Weave in all ends, except the strap tails if you haven’t sewn the straps on yet.
  2. Spray the basket until it is damp, not soaked.
  3. Stuff the basket firmly with a toilet roll wrapped in a towel, or a rolled towel about 5.5 in (14.0 cm) across.
  4. Pull each Fan open and set the mesh diamonds evenly by hand.
  5. Press the rim so it sits straight and level.
  6. Pin the straps flat on a towel at 8 in (20.3 cm) long and let them dry.
  7. Let everything dry completely, then sew on the straps.

Final Quality-Control Checklist

  • [ ] Base lies flat at 5.75 in (14.6 cm) across
  • [ ] Body is 72 sts at Rnds 13, 14, 20, and every rim round
  • [ ] 6 Fans each in Rnds 15, 17, and 19, with offset rows
  • [ ] Body is 4 in (10.2 cm) tall before the rim and 5 in (12.7 cm) after
  • [ ] Both straps are 32 rows, 8 in (20.3 cm) long
  • [ ] Ring is firm and round, about 1.25 in (3.2 cm) across
  • [ ] Straps are 36 rim sts apart
  • [ ] Basket hangs level with a roll inside

Troubleshooting

Base ruffles: Your tension is loose, or the increases are uneven. Go down a hook size, or check that you have exactly 6 increases per round.

Base cups: Your tension is tight. Go up a hook size.

Fans look crowded: Check that you skipped exactly 2 sts on each side of the Fan in Rnd 15.

Wrong count in Rnd 20: Recount the loops. You should have 6 ch-5 loops with 3 sc each.

Basket tilts: The straps are not exactly opposite each other. Move one strap so there are 36 sts between their centers.

Ring stretches: Pack the sc more tightly, or add a second round of sl sts around the ring.

Care

Hand wash in cool water with mild soap and lay flat to dry, with a towel inside the basket to keep its shape. Don’t tumble dry.

A crocheted tissue holder with cream rope handle and mauve crochet band holds white toilet paper in a minimalist bathroom.

Final Notes

The measurements build on each other:

  • The 4 sts per inch gauge gives you a 72-st base 5.75 in (14.6 cm) across.
  • That same 72 sts runs through the solid wall, the conversion round, and the cream rim, so the basket stays a straight cylinder 5 in (12.7 cm) tall.
  • Two 32-row straps, each 8 in (20.3 cm) long, overlap 1 in (2.5 cm) at the rim and 0.5 in (1.3 cm) at the ring, so the basket hangs about 12.5 in (31.8 cm) long.

Check your size at each checkpoint and the basket will come out right.

Happy crocheting!

Leave a Comment