Burgundy Leaf Lattice Hanging Basket Organizer Crochet Pattern

This two-tier hanging organizer pairs deep burgundy with a fresh sage-green scalloped rim. Each square basket has an open diamond lattice with raised leaf clusters. It looks light and decorative but still holds a full toilet paper roll, washcloths or small bathroom supplies.

The style is cottage and a little vintage. The burgundy does the structural work, and the green border trims the edge like a row of leaves. Two plain wooden rings add a natural touch where the straps loop over the rod.

This pattern uses US crochet terms. Each basket measures 6.5 in (16.5 cm) square and 5.5 in (14.0 cm) tall. The finished organizer hangs about 24 in (61.0 cm) from the rod to the bottom of the lower basket.

Each basket is worked in one piece: a solid square base that continues straight up into the lattice walls. The straps are worked lengthwise in rows. After the green border is added, the straps are sewn inside the back walls and looped over a rod through the wooden rings.

Finished Size and Construction

  • Basket size: 6.5 in (16.5 cm) square x 5.5 in (14.0 cm) tall
  • Overall hanging length: about 24 in (61.0 cm)
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4), cotton or cotton blend
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 4 crocheted (2 baskets, 2 straps) plus 2 wooden rings
  • Layout: 2 baskets stacked vertically, 3 in (7.6 cm) apart
  • Base size: 6.5 in (16.5 cm) square, 96 sts around
  • Wall height before border: 4.75 in (12.1 cm)
  • Border depth: 0.75 in (1.9 cm)
  • Strap size: 32 in (81.3 cm) x 1.1 in (2.8 cm)

Materials

Use a smooth worsted-weight cotton. Cotton holds its shape, handles bathroom humidity well and shows the leaf clusters clearly. Acrylic also works, but the walls will be softer.

  • Burgundy (Color A): 150 g, about 255 m (279 yd)
  • Sage green (Color B): 25 g, about 43 m (47 yd)

These quantities include about a 15% margin for checking gauge and for differences in tension.

Tools:

  • 5.0 mm (H-8) crochet hook
  • 2 natural wooden rings, 1.5 in (3.8 cm) inner diameter
  • Tapestry needle
  • 8 stitch markers
  • Scissors and measuring tape
  • Blocking pins and a spray bottle
  • A wooden rod or towel bar for hanging

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • dc: double crochet
  • tr: treble crochet
  • BLO: back loop only
  • sp: space
  • st(s): stitch(es)

Special stitch: Leaf (5-tr cluster)
Yo twice, insert hook in the indicated st, yo and pull up a loop, (yo, pull through 2 loops) twice. Repeat from * to * 4 more times in the same st (6 loops on hook), then yo and pull through all 6 loops. Ch 1 to lock. This makes a plump teardrop cluster about 1 in (2.5 cm) tall that looks like a leaf.

Gauge and Checkpoints

Gauge: 16 dc = 4 in (10.2 cm), and 8 dc rounds = 4 in (10.2 cm).

Make one basket base first and use it as your gauge swatch:

  • After base Round 3: 3.25 in (8.3 cm) across
  • After base Round 6: 6.25 in (15.9 cm) across
  • After base Round 7: 6.5 in (16.5 cm) across
  • After wall Round 4: walls about 2.25 in (5.7 cm) tall
  • After wall Round 7: walls about 4.25 in (10.8 cm) tall
  • After wall Round 9: walls 4.75 in (12.1 cm) tall

If your base is larger than 6.5 in (16.5 cm), go down a hook size. If it’s smaller, go up a hook size. A base that’s off by just 0.25 in (0.6 cm) per side changes the basket’s circumference by 1 in (2.5 cm), so check it before starting the walls.

Close-up of cream and burgundy crocheted lace with intricate diamond lattice pattern and visible stitches.

Basket Base (make 2)

With Color A, make a magic ring.

Round 1: Ch 3 (counts as dc), 2 dc in ring, ch 2, 3 dc in ring, ch 2; repeat from * 2 more times, sl st to top of beginning ch-3. Pull the ring closed. (12 dc, 4 ch-2 corner sps; 3 dc per side)

Round 2: Ch 3 (counts as dc), dc in next 2 dc, (2 dc, ch 2, 2 dc) in ch-2 sp, dc in next 3 dc; repeat from * 2 more times, (2 dc, ch 2, 2 dc) in last ch-2 sp, sl st to top of ch-3. (28 dc; 7 dc per side)

Round 3: Ch 3, dc in each dc to the corner, (2 dc, ch 2, 2 dc) in ch-2 sp, dc in each dc to the next corner; repeat around, working the last corner, then sl st to top of ch-3. (44 dc; 11 dc per side)

Round 4: Repeat Round 3. (60 dc; 15 dc per side)

Round 5: Repeat Round 3. (76 dc; 19 dc per side)

Round 6: Repeat Round 3. (92 dc; 23 dc per side)

Round 7 (conversion round): Ch 1, sc in each dc around, working 1 sc in each ch-2 corner sp, sl st to first sc. (92 sc + 4 corner sc = 96 sc)

Working only one sc into each corner space softens the corners into the rounded square shape of the finished baskets. Place a marker in each of the 4 corner sc.

How sides are counted: In this pattern, each side has 24 sts: the corner sc at its start plus the 23 sc after it. Each corner sc is counted only once, so 4 sides x 24 = 96.

Basket Walls (continue on each base)

Don’t fasten off. Work in joined rounds without turning, with the right side facing you.

Round 1 (fold line): Ch 1, sc in BLO of each st around, sl st to first sc. (96 sc)

The unused front loops form a crisp ridge, which turns the edge of the base upward.

Round 2: Ch 3 (counts as dc), dc in each st around, sl st to top of ch-3. (96 dc)

Round 3 (lattice): Ch 1, sc in same st, ch 5, sk 3 sts, sc in next st; repeat from * 22 more times, ch 5, sk 3 sts, sl st to first sc. (24 sc, 24 ch-5 loops)

Each 8 sts of the wall become 2 loops, for 12 pattern repeats (3 per side).

Round 4 (first leaf tier): Sl st in next 3 ch to reach the center of the first loop. Ch 1, sc in this loop, ch 3, Leaf in next sc, ch 3, sc in next loop, ch 5, sk next sc. Repeat from * around, starting each repeat in the next unused loop, then sl st to first sc. (12 Leaves, 24 sc, 24 ch-3 sps, 12 ch-5 loops)

Round 5 (lattice): Sl st in next 3 ch and into the top of the first Leaf. Ch 1, sc in top of Leaf, ch 5, sc in next ch-5 loop, ch 5; repeat from * around, sl st to first sc. (24 sc, 24 ch-5 loops)

Skip the ch-3 spaces and the side sc of Round 4. The new loops run diagonally from each Leaf tip to the space between Leaves, which forms the diamond lattice.

Round 6 (second leaf tier, offset): Sl st in next 3 ch to the center of the first loop. Ch 1, sc in this loop, ch 3, Leaf in next sc (the sc worked into a ch-5 loop), ch 3, sc in next loop, ch 5, sk next sc (the sc on a Leaf tip); repeat from * around, sl st to first sc. (12 Leaves, 24 sc, 24 ch-3 sps, 12 ch-5 loops)

These Leaves are shifted half a repeat from the first tier, so each one sits in a diamond between two lower Leaves.

Round 7 (lattice): Repeat Round 5. (24 sc, 24 ch-5 loops)

Round 8 (conversion round): Sl st into next ch-5 loop. Ch 1, 4 sc in each ch-5 loop around, sl st to first sc. (24 loops x 4 sc = 96 sc)

Round 9: Ch 1, sc in each st around, sl st to first sc. (96 sc) Fasten off Color A.

Measure: the walls should be 4.75 in (12.1 cm) tall, and each side of the basket should be 6.5 in (16.5 cm). Move your corner markers straight up so each side again has 24 sts.

Strap (make 2)

With Color A, ch 129.

Row 1: Sc in 2nd ch from hook and in each ch across, turn. (128 sc)

Rows 2–5: Ch 1, sc in each sc across, turn. (128 sc)

Fasten off, leaving a 24 in (61.0 cm) tail for sewing. The strap should measure 32 in (81.3 cm) long and 1.1 in (2.8 cm) wide. Working lengthwise keeps the strap firm, so it doesn’t stretch much under weight.

Make All Pieces

  • Color A: 2 bases with walls, 2 straps
  • Color B: 2 borders (worked onto the baskets)
  • Purchased: 2 wooden rings

Layout (front view, hanging):

        [ rod ]
       ||     ||
      (O)     (O)    <- wooden rings
       ||     ||
   [ upper basket ]
       ||     ||     <- 3 in (7.6 cm) gap
   [ lower basket ]

Border (make 2, one per basket)

Border gauge: 16 sc = 4 in (10.2 cm). Each scallop uses 4 sts and is about 1 in (2.5 cm) wide.

Join Color B in the first st of wall Round 9, at a corner.

Round 10: Ch 1, sc in each st around, sl st to first sc. (96 sc; 24 per side)

Round 11 (scallops): Ch 1, sc in first st, sk 1 st, 5 dc in next st, sk 1 st, sc in next st; repeat from * 22 more times, sk 1 st, 5 dc in next st, sk 1 st, sl st to first sc. (24 scallops: 24 x 5 dc + 24 sc = 144 sts; 6 scallops per side)

Fasten off and weave in the ends.

Why the math works: The wall ends with 96 sts, which divides evenly by the 4-st scallop repeat. That gives 24 complete scallops with no partial shell. Each side has 24 sts, which is also divisible by 4, so an sc of the scallop round lands exactly on every corner st (sts 1, 25, 49 and 73). Each side gets 6 matching scallops, and the corners stay neat.

Joining (Assembly)

Method: Whipstitch with Color A through both layers.

  1. Pick one side of each basket as the back. On the inside of each back wall, mark two strap positions, each centered 1.75 in (4.4 cm) in from a back corner.
  2. Lower basket: Lay the last 5 in (12.7 cm) of each strap flat against the inside back wall, with the strap end at the fold-line round. Whipstitch both long edges and the end through the solid rounds (wall Rounds 1, 2, 8, 9 and 10), and tack the strap to the sc of the lattice rounds in between. The strap now reaches the top of Round 10.
  3. Leave 3 in (7.6 cm) of strap free above the lower basket’s Round 10.
  4. Upper basket: Sew the next 5 in (12.7 cm) of each strap inside the upper back wall the same way, from the fold line to the top of Round 10. The upper basket’s fold line should be 8 in (20.3 cm) from the strap end.
  5. Rings: 19 in (48.3 cm) of each strap remains above the upper basket. Slide a wooden ring onto each strap and move it about 7 in (17.8 cm) above the upper basket. Take the strap up 4 in (10.2 cm) and over the rod, bring it back down through the ring, and pull through a 2.5 in (6.4 cm) tail. Sew the tail flat to the strap just below the ring.

Stitch logic: For each row edge of the strap, catch one stitch of the basket. Each long edge of the strap meets the wall in one straight vertical line, so the strap stays at a right angle to the rim.

Tension: Pull each whipstitch snug but not tight. Tight stitches pucker the lattice and make the basket tip forward.

Size checkpoint: Hang the organizer before tying off. Both rims should be level, and the 3 in (7.6 cm) gap should match on both straps. Adjust anything that’s off before you secure the ends.

Final Blocking

  1. Mist each basket lightly with water until it’s damp, not soaked.
  2. Stuff the basket firmly with a towel or a box about 6.5 in (16.5 cm) square.
  3. Square the corners with your fingers, and pull each Leaf upward so it stands straight.
  4. Pin the scallops so each one fans out evenly.
  5. Mist or steam the straps, then lay them flat and straight.
  6. Let everything dry completely, about 24 hours, before assembly.

Final Quality-Control Checklist

  • Each base is 6.5 in (16.5 cm) square with 96 sts after Round 7.
  • Each wall round has the correct count: 96 sts, 24 loops, or 12 Leaves.
  • The Leaves in Round 6 sit between the Leaves of Round 4.
  • Each basket has 24 scallops, 6 per side, with an sc at each corner.
  • Walls are 4.75 in (12.1 cm) tall before the border and 5.5 in (14.0 cm) with it.
  • Both straps are 32 in (81.3 cm) long.
  • The baskets hang level, 3 in (7.6 cm) apart.
  • All ends are woven in securely.

Troubleshooting

Base curls or ruffles: Curling means your tension is tight, so go up a hook size. Ruffling means you have extra stitches, so recount each side.

Leaves are lopsided: Keep all 5 tr the same height, and lock each cluster with the ch 1.

Lattice looks crooked: Check that every sc in Rounds 5 and 7 lands on a Leaf tip or in a ch-5 loop, not in a ch-3 space.

Scallops don’t fit at the end: Your Round 10 count is off. Confirm you have 96 sts before starting Round 11.

Basket tips forward: The straps are sewn too high or too tight. Resew them so they reach all the way down to the fold line.

Straps stretch: Cotton relaxes a little under weight. Shorten the loop at the ring instead of pulling on the strap.

Care

Hand wash in cool water with mild soap, press the water out in a towel, and reshape the baskets to dry flat. If you can, remove the wooden rings before washing.

Burgundy and cream crocheted hanging baskets mounted on a wall above a toilet, storing paper and a potted plant.

Final Notes

The whole project follows one chain of measurements. The base is 6.5 in (16.5 cm) with 96 stitches. The walls keep those 96 stitches across 12 lattice repeats, and the solid top band comes back to 96. The border adds 24 scallops, 6 per side. Two 32 in (81.3 cm) straps hold the baskets 3 in (7.6 cm) apart and loop over the rod through the wooden rings. If you check the base size and wall height at each checkpoint, the finished pieces will line up neatly.

Happy crocheting!

Leave a Comment