Bluebell Fan Double Toilet Paper Holder Crochet Pattern

This hanging holder has two oval lace baskets joined side by side. Each basket sits on a solid denim-blue base. The walls are rows of open fans with a light chain net between them, and a bright sunshine-yellow rim finishes each top edge. Two crocheted straps loop over a towel bar, so the holder hangs flat against the wall and keeps two spare rolls within easy reach.

The style is cottage bathroom: soft blue cotton, fans that let the white paper show through the lace, and one cheerful line of yellow. It also works in a powder room, a laundry room, or a craft room for storing yarn cakes.

The pattern uses US crochet terms. Each basket measures 5.75 in (14.6 cm) long, 5 in (12.7 cm) wide and 4 in (10.2 cm) tall. Joined, the holder is 11.5 in (29.2 cm) wide.

The construction is simple. You work an oval double crochet base in the round, turn the wall up with a back-loop round, and then work straight up in fan and net rounds with no increases. You join the two baskets at their curved ends, add the yellow rim to each, and then make and sew the two straps.

Finished Size and Construction

  • Finished size: 11.5 in (29.2 cm) wide x 5 in (12.7 cm) deep x 4 in (10.2 cm) tall, plus straps
  • Skill level: Easy-Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5 mm (H-8)
  • Number of pieces: 4 (2 baskets, 2 straps)
  • Layout: 2 baskets in a single row, joined end to end
  • Piece size (one basket): 5.75 in (14.6 cm) x 5 in (12.7 cm) x 4 in (10.2 cm)
  • Wall height before border: 3.5 in (8.9 cm)
  • Border depth: 0.5 in (1.3 cm), 2 yellow rounds
  • Strap size: 1.25 in (3.2 cm) x 12 in (30.5 cm)

Materials

Use a smooth 100% cotton or cotton blend in worsted weight. Cotton holds its shape on a wall and gives crisp, clearly defined fans. Avoid fuzzy or very stretchy yarns, because the baskets will sag once they’re holding rolls.

The amounts below assume cotton of about 85 m (93 yd) per 50 g.

  • Denim blue (main color): 130 g, about 221 m (242 yd)
  • Sunshine yellow (rim): 20 g, about 34 m (37 yd)

Tools:

  • 5 mm (H-8) crochet hook
  • 4 stitch markers
  • Tapestry needle
  • Scissors
  • Tape measure
  • Spray bottle and two standard toilet rolls (for blocking)

The quantities include a margin of about 15% to cover gauge differences and your swatch.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • BLO – back loop only
  • rev sc – reverse single crochet
  • sp – space
  • st(s) – stitch(es)
  • rnd(s) – round(s)
  • rep – repeat

Fan (or shell): 5 dc in the same stitch.

Reverse single crochet (rev sc): Work from left to right. Insert the hook in the next st to the right, yarn over, pull up a loop, yarn over, and pull through both loops. This makes the twisted, beaded edge.

Gauge and Checkpoints

Gauge: 16 dc and 8 rows = 4 in (10.2 cm). 16 sc and 18 rows = 4 in (10.2 cm).

Finish one whole basket before you start the second. It is your real gauge test, and it shows you whether a standard roll fits inside.

Checkpoints:

  • After Rnd 1: 1 in (2.5 cm) wide x 1.75 in (4.4 cm) long
  • After Rnd 3: 3 in (7.6 cm) wide x 3.75 in (9.5 cm) long
  • After Rnd 5: 5 in (12.7 cm) wide x 5.75 in (14.6 cm) long
  • After Rnd 7: wall 0.75 in (1.9 cm) tall
  • After Rnd 13: wall 3.5 in (8.9 cm) tall
  • After Rnd 15: wall 4 in (10.2 cm) tall

If your base is too big, go down 0.5 mm. If it is too small, go up 0.5 mm.

If the base ruffles, your dc are short: go up a hook size. If it cups, your dc are tall: go down a size. Get the base right first, because every wall round keeps its 66 stitches.

Close-up of blue crochet fabric with yellow picot-edged trim, showcasing fine handmade textile stitchwork.

Basket (Make 2)

Base

With denim blue, ch 7.

Rnd 1: 6 dc in 3rd ch from hook (the skipped 2 ch do not count as a st), dc in next 3 ch, 6 dc in last ch. Rotate and work along the other side of the foundation chain: dc in next 3 ch. Join with sl st to first dc. (18 sts: 6 per end, 3 per side)

Rnd 2: Ch 2 (does not count as a st here or in later rounds), 2 dc in each of next 6 sts, dc in next 3 sts, 2 dc in each of next 6 sts, dc in next 3 sts. Join. (30 sts: 12 per end, 3 per side)

Rnd 3: Ch 2, (dc in next st, 2 dc in next st) 6 times, dc in next 3 sts; rep from * once. Join. (42 sts: 18 per end, 3 per side)

Rnd 4: Ch 2, (dc in next 2 sts, 2 dc in next st) 6 times, dc in next 3 sts; rep from * once. Join. (54 sts: 24 per end, 3 per side)

Rnd 5: Ch 2, (dc in next 3 sts, 2 dc in next st) 6 times, dc in next 3 sts; rep from * once. Join. (66 sts: 30 per end, 3 per side)

Each base round adds 12 stitches, 6 on each curved end. The 3 side stitches never change, so the oval keeps its 0.75 in (1.9 cm) straight section.

Place markers in the 1st st (start of end A), the 31st st (first side), the 34th st (start of end B) and the 64th st (second side). Move them up as you go.

Wall

Rnd 6: Ch 1, sc BLO in each st around. Join to first sc. (66 sc)

The unworked front loops form the neat ridge that turns the wall up.

Rnd 7 (shells): Ch 1, sc in first st, sk 2 sts, fan in next st, sk 2 sts, sc in next st; rep from * 10 more times, but end the last rep with sk 2 sts instead of the final sc. Join to first sc. (11 fans, 11 sc = 66 sts)

Rnd 8 (net): Ch 5 (counts as dc + ch 2), sc in center dc of next fan, ch 2, dc in next sc, ch 2; rep from * 10 more times, ending the last rep at . Join to 3rd ch of beginning ch-5. (11 dc, 11 sc, 22 ch-2 sps)**

Rnd 9 (offset fans): Ch 3 (counts as dc), 4 dc in same st, sk ch-2 sp, sc in next sc, sk ch-2 sp, fan in next dc; rep from * 10 more times, ending the last rep at . Join to top of ch-3. (11 fans, 11 sc = 66 sts)**

These fans sit over the sc of Rnd 7, halfway between the shells below. That offset gives the overlapping scallop pattern.

Rnd 10 (net): Sl st in next 2 dc (the center of the first fan), ch 1, sc in same st, ch 2, dc in next sc, ch 2, sc in center dc of next fan; rep from * 10 more times, ending the last rep at . Join to first sc. (11 sc, 11 dc, 22 ch-2 sps)**

Rnd 11 (fans): Ch 1, sc in same st, sk ch-2 sp, fan in next dc, sk ch-2 sp, sc in next sc; rep from * 10 more times, ending the last rep at . Join to first sc. (11 fans, 11 sc = 66 sts)**

These fans line up with the shells of Rnd 7.

Rnd 12 (net): Rep Rnd 8. (11 dc, 11 sc, 22 ch-2 sps)

Rnd 13 (conversion): Ch 1, sc in same st, 2 sc in next ch-2 sp, sc in next sc, 2 sc in next ch-2 sp, sc in next dc; rep from * 10 more times, ending the last rep at . Join. (22 sts worked 1-per-st + 44 sts from 22 sps = 66 sc)**

Fasten off blue. The wall now measures 3.5 in (8.9 cm). Leave the rim for later.

Make All Pieces

  • Baskets: 2, both in denim blue through Rnd 13
  • Straps: 2, in denim blue (instructions below)
  • Yellow: used only for the rim rounds, about 10 g per basket

Layout (front view):

[ Basket 1 ][ Basket 2 ]
   Strap       Strap

Strap (Make 2)

With denim blue, ch 6.

Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (5 sc)

Rows 2–54: Ch 1, sc in each st across. Turn. (5 sc)

At 18 rows per 4 in, 54 rows give 12 in (30.5 cm). The strap measures 1.25 in (3.2 cm) x 12 in (30.5 cm). Fasten off and leave a 12 in (30.5 cm) tail for sewing.

Joining

Lay the baskets end to end so the curved end B of Basket 1 touches the curved end A of Basket 2. Make sure the straight sides of both baskets face front and back.

Find the center 4 sts of each touching curved end on Rnd 6. On end B these are sts 47–50. On end A they are sts 14–17. Mark them.

Thread denim blue on a tapestry needle. Whipstitch the 4 marked sts of Basket 1 to the 4 marked sts of Basket 2, one stitch to one stitch. Go through both loops so the ridge doesn’t distort.

Don’t cut the yarn. Climb straight up the touching wall and tack once through the touching sc of Rnd 9 or Rnd 11, then once through the matching sts of Rnd 13. Use 2 small stitches at each point. Don’t add any stitches: this is a 4-to-4 seam plus tacks.

Keep the tension snug but relaxed. The seam should hold the baskets level without pinching the curved ends flat.

Checkpoint: The joined unit measures 11.5 in (29.2 cm) wide and 5 in (12.7 cm) deep.

Border

Border gauge: 16 sc = 4 in (10.2 cm), the same as the wall.

Work the rim separately on each basket.

Rnd 14: Join yellow in any st of Rnd 13. Ch 1, sc in each st around. Join. (66 sc: 30 per curved end, 3 per straight side)

Rnd 15: Ch 1, rev sc in each st around. Join and fasten off. (66 rev sc: 30 per curved end, 3 per straight side)

Why the math works: The rim matches the base exactly. 66 sc at 16 sc per 4 in gives 16.5 in (41.9 cm) around, the same as Rnd 6. The wall never increases or decreases, so the rim doesn’t ruffle or pull in.

Once both rims are done, whipstitch the 4 touching yellow sts of Rnd 14 together with yellow, matching 4 to 4.

Attach the Straps

Each strap goes at the center of the back straight side of its basket.

Place one strap end 1.5 in (3.8 cm) down the inside of the back wall, centered, and sew it on with a backstitch box. Wrap the strap over the towel bar, then sew the other end directly on top of the first, overlapping by 1.5 in (3.8 cm). The loop rises about 3 in (7.6 cm) above the rim.

If you want to take the holder down easily, sew only one end and fasten the second end with a button.

Final Blocking

  1. Weave in all ends on the inside of the baskets.
  2. Spray each basket lightly until it is damp but not dripping.
  3. Slip one toilet roll into each basket.
  4. Shape the oval and pull each fan open evenly.
  5. Press the bases flat on a towel.
  6. Straighten the straps and pin them flat.
  7. Leave everything to dry completely, about 24 hours.
  8. Remove the rolls and check the final measurements.

Final Quality-Control Checklist

  • Each base has 66 sts and measures 5 in (12.7 cm) x 5.75 in (14.6 cm).
  • Each wall is 4 in (10.2 cm) tall.
  • Each fan round has 11 fans.
  • The fans alternate position from one fan round to the next.
  • The joining seam is 4 sts to 4 sts at the base and at the rim.
  • The holder is 11.5 in (29.2 cm) wide.
  • Both rims have 66 rev sc.
  • Both straps are 12 in (30.5 cm) long and firmly sewn.
  • All ends are woven in.

Troubleshooting

Base ruffles: You have too many stitches for your gauge. Use a larger hook or check your increases.

Base cups: Your dc are too tall. Use a smaller hook.

Fans don’t line up: Check that you started Rnd 9 in the dc and Rnd 11 in the sc.

Fan count is off: Count the sc between the fans. Every round should have 11.

Wall leans outward: Your tension is loose in the net rounds. Make the ch-2 tighter.

Roll doesn’t fit: Go up a hook size and remake the base.

Holder tilts: The straps are uneven. Resew them with the same overlap.

Rim flares: You have too many stitches. Recount Rnd 13.

Care

Hand wash in cool water and dry flat with a roll inside each basket. Do not tumble dry.

Blue crocheted toilet paper holders with yellow trim holding white rolls hang from a wooden rod in a bright bathroom.

Final Notes

Here is the measurement chain. The 66-stitch base measures 5 in (12.7 cm) x 5.75 in (14.6 cm). Every wall round keeps those 66 stitches and builds the wall to 3.5 in (8.9 cm). The yellow rim adds 0.5 in (1.3 cm), for a 4 in (10.2 cm) basket. Two baskets joined end to end make an 11.5 in (29.2 cm) holder, and two 12 in (30.5 cm) straps hang it from the bar.

Happy crocheting!

Leave a Comment