This letter Y keychain is made from stacked fan shells in soft sage green, cream and blush pink. Each band is a wide open fan with small chain arches at the sides, which gives the letter a lacy, scalloped outline. Three tiny flowers with yellow centers and green leaves are sewn on as a final touch.
The style is gentle and cottage-like, and it’s small enough to make in an evening. It looks good on a tote bag, backpack zipper or set of keys, and it makes a thoughtful personalized gift.
The finished keychain is about 4.75 in (12.1 cm) tall and 3.75 in (9.5 cm) wide across the arm tips. Before the border it is 4.5 in (11.4 cm) tall and 3.5 in (8.9 cm) wide. All terms are US crochet terms.
You work the stem from the bottom up in two-row color bands. A wider green junction band splits into two arms, and each arm is worked separately in rows that lean outward. One round of cream single crochet then outlines the whole letter and adds the hanging loop. Last, you make the flowers and leaves, sew them on and attach the hardware.
Finished Size and Construction
- Finished size: 4.75 in (12.1 cm) tall x 3.75 in (9.5 cm) wide
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: Sport weight (#2) cotton
- Hook: 3.25 mm (US D/3)
- Number of pieces: 1 letter, plus 3 flowers and 6 leaves sewn on as appliqués
- Layout: A single Y shape: a stem of 5 fan bands and two arms of 3 fan bands each
- Piece size: Stem 1.5 in (3.8 cm) wide, junction 3 in (7.6 cm) wide
- Size before border: 4.5 in (11.4 cm) x 3.5 in (8.9 cm)
- Border depth: 0.125 in (0.3 cm) on every edge
Materials
Use a smooth mercerized cotton or a cotton blend in sport weight. Cotton gives crisp stitch definition, holds the fan shape well and stands up to daily handling on a bag.
- Color A, sage green: 6 g, about 20 m
- Color B, cream: 6 g, about 20 m
- Color C, blush pink: 5 g, about 16 m
- Color D, soft yellow: 1 g, about 2 m (flower centers)
These quantities include a margin for swatching and weaving in ends.
Tools:
– 3.25 mm (US D/3) crochet hook
– Tapestry needle
– Scissors
– 1 gold split ring, 1 in (2.5 cm)
– 1 short gold chain, 4 links, about 1 in (2.5 cm)
– 1 gold jump ring, 0.25 in (0.6 cm)
– 2 pairs of flat-nose pliers
– Rustproof pins and a foam blocking board
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sc2tog: single crochet 2 together
- sk: skip
- sp: space
- st(s): stitch(es)
- RS: right side
Fan band (special): Every band is two rows in one color. Row A is the fan row: sc in the first st, sk 4 sts, 9 dc in the next st, sk 4 sts, sc in the last st. Row B is the top row: ch 1, sc in the first sc, ch a short arch, sc in each of the 9 dc, ch a short arch, sc in the last sc. The chain arches in Row B form the scalloped side outline.
Standing sc: Start with a slip knot on the hook, insert the hook into the st and work a sc as usual.
Gauge and Checkpoints
Gauge: 22 sc = 3 in (7.6 cm), and one fan band (2 rows) = 0.6 in (1.5 cm) tall.
Work Rows 1–3 as a test before you go on. Check these measurements as you work:
- After Row 1: 11 sc = 1.5 in (3.8 cm) wide.
- After Row 3: the piece is 0.75 in (1.9 cm) tall.
- After Row 11: the stem is 3.25 in (8.3 cm) tall and the top of the junction is 3 in (7.6 cm) wide.
- Each arm after its 3 bands: 1.75 in (4.4 cm) long, measured along the arm.
If your test is too big, go down a hook size to 3.0 mm. If it is too small, go up to 3.5 mm (US E/4). If only the fans are too tall, work the dc more snugly rather than changing hooks.

Stem
With A, ch 12.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (11 sc)
Row 2 (Row A, color A): Ch 1, sc in first sc, sk next 4 sc, 9 dc in next sc, sk next 4 sc, sc in last sc, turn. (11 sts: 2 sc + 9 dc)
Row 3 (Row B, color A): Ch 1, sc in first sc, ch 2, sc in each of 9 dc, ch 2, sc in last sc. Change to B in the last st, turn. (11 sc + 2 ch-2 sps)
Row 4 (Row A, color B): Ch 1, sc in first sc, sk ch-2 sp and next 4 sc, 9 dc in next sc (the center sc), sk next 4 sc and ch-2 sp, sc in last sc, turn. (11 sts)
Row 5 (Row B, color B): Work as Row 3. Change to C in the last st, turn. (11 sc + 2 ch-2 sps)
Rows 6–7 (color C): Work as Rows 4–5. Change to B at the end of Row 7.
Rows 8–9 (color B): Work as Rows 4–5. Change to A at the end of Row 9.
Each fan sits in the center sc of the band below. The skipped chain arches stay open at both sides, which makes the lacy outline.
Junction Band
This band is wider so the two arms have room to start.
Row 10 (color A): Ch 1, sc in first sc, sk ch-2 sp and next 3 sc, 5 dc in each of next 3 sc, sk next 3 sc and ch-2 sp, sc in last sc, turn. (17 sts: 2 sc + 15 dc)
Row 11 (color A): Ch 1, 3 sc in first sc, sc in next 7 dc, 2 sc in next dc (the center dc), sc in next 7 dc, 3 sc in last sc. (22 sc)
Check: 3 + 7 + 2 + 7 + 3 = 22. The row now measures 3 in (7.6 cm). Stitches 1–11 hold the left arm and stitches 12–22 hold the right arm.
Left Arm
Change to C in the last st of Row 11 and turn. You work over the first 11 sts only. Row 12 starts at the outer (left) edge.
Row 12 (Row A, color C): Ch 1, sc in first sc, sk next 4 sc, 9 dc in next sc, sk next 4 sc, sc in 11th sc, turn. Leave the remaining 11 sts unworked. (11 sts)
Row 13 (Row B, color C): Ch 1, sc in first sc, ch 1, sc in each of 9 dc, ch 3, sc in last sc. Change to B in the last st, turn. (11 sc + 1 ch-1 sp + 1 ch-3 sp)
The short ch-1 arch is on the inner edge and the longer ch-3 arch is on the outer edge. This uneven pair tips each band outward, so the arm leans away from the center.
Row 14 (Row A, color B): Ch 1, sc in first sc, sk ch-3 sp and next 4 sc, 9 dc in next sc, sk next 4 sc and ch-1 sp, sc in last sc, turn. (11 sts)
Row 15 (Row B, color B): Work as Row 13. Change to A at the end. (11 sc + 2 sps)
Rows 16–17 (color A): Work as Rows 14–15. Fasten off at the end of Row 17.
Right Arm
Row 12 (Row A, color C): With the piece turned so you can work the remaining sts, join C with a standing sc in the 12th st of Row 11, next to the left arm. Sk next 4 sc, 9 dc in next sc, sk next 4 sc, sc in the 22nd sc, turn. (11 sts)
Row 13 (Row B, color C): Ch 1, sc in first sc, ch 3, sc in each of 9 dc, ch 1, sc in last sc. Change to B, turn. (11 sc + 2 sps)
The ch-3 arch is again on the outer edge and the ch-1 arch on the inner edge.
Rows 14–15 (color B): Work as Rows 12–13, working the fan in the center sc and skipping the ch-sps. Change to A at the end.
Rows 16–17 (color A): Work as Rows 14–15. Fasten off.
Weave in all ends now, before the border. Each arm should measure 1.75 in (4.4 cm) along its length, and the letter should be 4.5 in (11.4 cm) x 3.5 in (8.9 cm).
Border
Border gauge: about 7 sc per 1 in (2.5 cm) along every edge.
Round 1 (color B): With the RS facing, join B with a standing sc in the first foundation ch at the bottom right corner. Work all around as follows:
- Bottom edge: 2 more sc in the same ch, which completes a 3-sc corner. Sc in the next 9 foundation chs, then 3 sc in the last ch. (15 sts)
- Left outer side: 1 sc in the end of Row 1, 2 sc in each row-end of Rows 2–11 (20), 2 sc in each row-end of Rows 12–16 of the arm (10), and 1 sc in the end of Row 17. (32 sts)
- Left tip: 3 sc in the first sc of Row 17, 3 sc in the ch-3 sp, sc in each of 9 sc, 1 sc in the ch-1 sp, 3 sc in the last sc. (19 sts)
- Inner V: 1 sc in the end of Row 17, 2 sc in each row-end of Rows 16–13 (8), then sc2tog over the Row 12 end of the left arm and the Row 12 end of the right arm. Ch 10, sl st in the top of the sc2tog to make the hanging loop. Then 2 sc in each row-end of Rows 13–16 of the right arm (8) and 1 sc in the end of Row 17. (19 sts, not counting the loop)
- Right tip: 3 sc in the first sc, 1 sc in the ch-1 sp, sc in each of 9 sc, 3 sc in the ch-3 sp, 3 sc in the last sc. (19 sts)
- Right outer side: 1 sc in the end of Row 17, 2 sc in each row-end of Rows 16–12 (10), 2 sc in each row-end of Rows 11–2 (20), and 1 sc in the end of Row 1. (32 sts)
Join with a sl st to the first sc. Total: 15 + 32 + 19 + 19 + 19 + 32 = 136 sc. Fasten off and weave in the ends.
Why the math works: A sc row and a dc fan row together stand about 0.6 in (1.5 cm) tall. Working 4 sc per band (2 + 2) gives about 6.7 sc per inch, which is very close to the 7 sc border gauge, so the edges lie flat without ruffling or cupping. The 3-sc corner groups turn the corners cleanly. The sc2tog draws in the inner V so it stays crisp.
Flowers and Leaves
Flower (make 3 with C): Make a magic ring.
– Round 1: 5 sc in the ring, sl st to the first sc. (5 sc)
– Round 2: (Ch 2, 2 dc, ch 2, sl st) all in the same sc, then repeat in each remaining sc. (5 petals)
Fasten off, leaving a 6 in (15.2 cm) tail. Each flower measures 0.75 in (1.9 cm) across. With D, work a French knot (2 wraps) in the center of each flower.
Leaf (make 6 with A): Ch 5, sl st in 2nd ch from hook, sc in next ch, hdc in next ch, sc in last ch. (4 sts) Fasten off, leaving a tail. Each leaf is about 0.5 in (1.3 cm) long.
Placement: Sew 2 leaves behind each flower so they peek out on either side.
– Flower 1: on the green tip band of the right arm, near the outer edge.
– Flower 2: on the left edge of the stem, where the pink band (Rows 6–7) meets the cream band (Rows 8–9).
– Flower 3: on the right edge of the stem, over the first cream band (Rows 4–5).
Sew through the back loops so your stitches don’t show on the front.
Hardware
Open the jump ring with the two pliers. Thread it through the cream hanging loop and the last link of the chain, then close it fully. Open the split ring and slide on the free end of the chain.
Final Blocking
- Wet the letter (without the hardware) in cool water and press out the extra water in a towel.
- Pin the stem straight and 1.5 in (3.8 cm) wide. With the border, it measures 1.75 in (4.4 cm).
- Open each fan to a smooth half-circle and pin the chain arches outward.
- Angle the arms so the tips are 3.75 in (9.5 cm) apart, outside edge to outside edge.
- Check that the total height is 4.75 in (12.1 cm).
- Leave it to dry completely, then sew on the flowers and attach the hardware if you haven’t already.
Final Quality-Control Checklist
- The stem has 5 bands in this order: green, cream, pink, cream, green.
- Each arm has 3 bands: pink, cream, green.
- Every fan has 9 dc. The junction fan has 15 dc.
- Row 11 has exactly 22 sc.
- The border totals 136 sc, not counting the loop.
- The ch-3 arches on the arms are all on the outer edges.
- The flowers are sewn securely, with no tails showing.
- The jump ring is fully closed.
- Final size is 4.75 in (12.1 cm) x 3.75 in (9.5 cm).
Troubleshooting
- Fans ruffle: Your dc are too loose. Tighten them or go down a hook size.
- Fans cup: Your sc base is too tight. Loosen Row B.
- Arms stand straight up: Check that the ch-3 arches are on the outer edges. Then pin the arms at a stronger angle while blocking.
- Gap at the V: Work the sc2tog through both arm edges firmly.
- Border waves: Work 1 sc instead of 2 in a few row-ends, matching the change on both sides.
- Wrong border count: Recount one section at a time against the per-section totals above.
Care
Hand wash in cool water with mild soap and lay flat to dry. Take off the split ring first so the metal doesn’t scratch the cotton or tarnish.

Final Notes
The measurement chain is simple to follow. Row 1 is 1.5 in (3.8 cm) wide. Each band adds 0.6 in (1.5 cm), and the stem is 3.25 in (8.3 cm) tall after Row 11. The junction opens to 3 in (7.6 cm). Each arm is 1.75 in (4.4 cm) long, and the letter measures 4.5 in (11.4 cm) x 3.5 in (8.9 cm) before the border. The 0.125 in (0.3 cm) border brings it to the finished 4.75 in (12.1 cm) x 3.75 in (9.5 cm). If each checkpoint matches, the finished piece will too. Happy crocheting!