Blossom Initial S Letter Keychain Crochet Pattern

This Blossom Initial S keychain is a plump, stuffed letter S in soft mint green. Two pink five-petal flowers with sunny yellow centers, deep green leaves, and tiny cream berries trail down its left side. A gold keyring, a short gold chain, and a little pink heart charm finish it. It is sized to hang from a handbag handle.

The style is sweet and botanical: one smooth, solid letter with a small cluster of flowers that looks like a pressed bouquet. Neat single crochet columns run all the way around the letter, so it looks clean from both sides.

This pattern uses US crochet terms. The finished letter measures about 4.5 in (11.4 cm) tall, 3.5 in (8.9 cm) wide, and 1 in (2.5 cm) thick. The heart charm is about 0.75 in (1.9 cm) tall.

Construction is simple. You crochet the letter as one continuous stuffed tube, starting at the bottom tip. Mixing short and tall stitches bends the tube into the two curves of the S. Then you make the small appliqués, sew them on, and add the hardware.

Finished Size and Construction

  • Finished size: 4.5 in (11.4 cm) tall x 3.5 in (8.9 cm) wide x 1 in (2.5 cm) thick
  • Skill level: Easy to intermediate (amigurumi basics)
  • Terminology: US crochet terms
  • Yarn weight: Sport weight (#2) cotton or cotton blend
  • Hook: 2.5 mm (US B/1 or C/2)
  • Number of pieces: 15 crocheted pieces: 1 letter tube, 2 flowers, 6 leaves, 5 berries, 1 heart
  • Layout: Flowers, leaves, and berries sewn in a column down the left side of the S
  • Piece size: Tube is 18 stitches around, 3 in (7.6 cm) circumference; flowers 1.25 in (3.2 cm) across; leaves 0.9 in (2.3 cm) long; berries 0.35 in (0.9 cm)
  • Size before border: Same as finished size; no border is worked
  • Border depth: 0 in (0 cm)

Materials

Choose a smooth mercerized or milk cotton in sport weight, about 165 m per 50 g (roughly 3.3 m per gram). Cotton shows the stitch columns clearly and holds a firm shape.

  • Mint green (letter): 10 g / 33 m
  • Pink (flowers and heart): 4 g / 13 m
  • Yellow (flower centers): 1 g / 3 m
  • Cream (berries): 2 g / 7 m
  • Dark green (leaves): 3 g / 10 m

These amounts include a margin of about 20%.

Tools and notions:

  • 2.5 mm crochet hook
  • Polyester fiberfill, about 5 g
  • 2 locking stitch markers
  • Tapestry needle and sharp scissors
  • Gold split keyring, 1.25 in (3.2 cm), with a 1.5 in (3.8 cm) chain
  • 2 gold jump rings, 0.25 in (0.6 cm), plus a 1 in (2.5 cm) length of chain for the heart
  • Flat-nose pliers

Abbreviations (US Terms)

  • MR – magic ring
  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sc2tog – single crochet 2 together
  • st(s) – stitch(es)
  • Rnd – round

Special stitch – Curve Round: A round of 18 stitches that uses sc on the inner side of the tube and dc on the outer side. The tall dc stitches make the outside of the tube longer, so the tube bends toward the short sc side.

Gauge and Checkpoints

Gauge: 12 sc and 13 rounds = 2 in (5.1 cm), worked in a spiral. Your gauge doesn’t have to match exactly, but tight fabric keeps the stuffing from showing through.

Test on the tube itself. Work Rnds 1–6 and check:

  • After Rnd 3: flat circle about 0.9 in (2.3 cm) across
  • After Rnd 6: tube 3 in (7.6 cm) around; flattened width 1.5 in (3.8 cm)
  • After Rnd 17: bottom curve about 3.5 in (8.9 cm) across its outer edge
  • Finished letter: 4.5 in (11.4 cm) tall

If your tube is too big, go down to a 2.25 mm hook. If it is too small or the fabric feels stiff, go up to a 2.75 mm hook. Keep the stitch count the same, because it controls the curves.

Crocheted pink daisy flowers with yellow centers and cream berries decorating a pale green textured bag.

Pattern

Letter S Tube (Mint Green, Make 1)

Work in continuous spiral rounds. Do not join or turn. Mark the first stitch of each round.

Rnd 1: 6 sc in MR. (6)

Rnd 2: Inc in each st around. (12)

Rnd 3: (Sc in next st, inc) 6 times. (18)

Rnds 4–6: Sc in each st around. (18)

This is the bottom tip of the S. Put a second marker in st 9. Sts 1–9 are Side A and sts 10–18 are Side B. Spiral rounds drift a little, so check that Side A stays on the same side of the tube. Move the marker if needed.

Bottom curve – Rnds 7–17 (11 Curve Rounds, bending toward Side A):
Sc in sts 1–6, hdc in sts 7–9, dc in sts 10–15, hdc in sts 16–18. (18)

The short sc stitches on Side A make it the inner edge of the curve. The tall dc stitches on Side B make it the outer edge. The hdc stitches smooth the change in height between the two sides.

Start stuffing after Rnd 10. Stuff firmly, but don’t overfill the curve or it will straighten out.

Checkpoint: The tube should form about three-quarters of a circle. Its outer edge measures about 3.5 in (8.9 cm) across.

Middle spine – Rnds 18–22: Sc in each st around. (18)

This short straight section is the diagonal stroke of the S. Keep stuffing as you go.

Top curve – Rnds 23–33 (11 Curve Rounds, bending toward Side B):
Dc in sts 1–6, hdc in sts 7–9, sc in sts 10–15, hdc in sts 16–18. (18)

Now Side B is the inner edge, so the tube bends the other way. This reverse curve makes the S shape.

Rnds 34–36: Sc in each st around. (18)

This is the top tip of the S. Finish stuffing all the way to the end.

Rnd 37: (Sc in next st, sc2tog) 6 times. (12)

Rnd 38: Sc2tog 6 times. (6)

Fasten off, leaving a 12 in (30.5 cm) tail. Weave the tail through the front loops of the last 6 sts, pull tight, and secure.

Curve shaping: Thread the tail on a needle. Run it along the inner edge of the top curve, under one sc in each round. Pull it gently so the curve closes a little more. Repeat on the bottom curve with a separate strand. Secure both strands and hide the ends inside.

Flowers (Make 2)

Rnd 1 (yellow): 10 sc in MR, sl st to first sc to join. (10) Fasten off.

Rnd 2 (pink): Join in any st. (In next st work [hdc, 2 dc, hdc], sl st in next st) 5 times. (5 petals, 4 sts each)

Fasten off, leaving a 10 in (25.4 cm) tail for sewing. Each flower is about 1.25 in (3.2 cm) across.

Leaves (Dark Green, Make 6)

Ch 7. Sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, hdc in next ch, sc in last ch. (6) Rotate and work along the other side of the foundation chain: sc, hdc, dc, dc, hdc, sc. (6) Ch 2, then sl st in the first sc to form the tip. (12 sts plus tip)

Optional: work a line of surface sl st down the middle as a vein. Fasten off, leaving a 6 in (15.2 cm) tail. Each leaf is about 0.9 in (2.3 cm) long.

Berries (Cream, Make 5)

Rnd 1: 6 sc in MR. (6)

Rnd 2: Sc in each st around. (6)

Rnd 3: Sc2tog 3 times. (3)

Tuck the starting tail inside as stuffing. Cinch closed, leaving a 6 in (15.2 cm) tail. Each berry is about 0.35 in (0.9 cm) across.

Heart Charm (Pink, Make 1)

Humps (make 2):
Rnd 1: 6 sc in MR. (6)
Rnd 2: (Sc, inc) 3 times. (9)
Rnd 3: Sc in each st. (9)
Fasten off the first hump. Leave the second hump on the hook.

Rnd 4: Sc 9 around the second hump, then sc 9 around the first hump. (18)

Rnd 5: (Sc 4, sc2tog) 3 times. (15)

Rnd 6: (Sc 3, sc2tog) 3 times. (12)

Rnd 7: (Sc 2, sc2tog) 3 times. (9) Stuff the heart.

Rnd 8: (Sc 1, sc2tog) 3 times. (6)

Rnd 9: Sc2tog 3 times. (3)

Fasten off and cinch closed. Sew the small gap between the humps shut. The heart is about 0.75 in (1.9 cm) tall.

Make All Pieces

Color Pieces
Mint green 1 letter tube
Pink 2 flower petal rounds, 1 heart
Yellow 2 flower centers
Dark green 6 leaves
Cream 5 berries

Appliqué layout (front of letter, left side, top to bottom):

            [Leaf]
     [Leaf][FLOWER 1][Leaf]      <- upper-left of top curve
           [Berry][Berry]
     [Leaf][Berry]               <- left end of spine
     [Leaf][FLOWER 2]            <- lower-left of bottom curve
                [Berry][Berry]   <- along bottom edge

In total, that is 6 leaves, 2 flowers, and 5 berries. They form one continuous trailing spray down the left side of the S.

Joining

Sew all the pieces on using their yarn tails and a tapestry needle. Pin everything first, then step back and check the layout before you sew.

Stitch-to-stitch logic:

  • Leaves: Tuck the base end of each leaf slightly under the edge of a flower. Whipstitch the base and the first 3 sts on each side to the tube. Leave the tip free so it lifts a little.
  • Flowers: Sew through the yellow center ring into the tube, one stitch per center sc (10 stitches). Then tack the tip of each petal down with one small stitch.
  • Berries: Take the tail straight down into the tube and come back up 1/8 in (0.3 cm) away. Pass back through the berry. Do this 3 times.

Tension: Pull each stitch only until it is snug. If you pull too hard, the stuffed tube dents and puckers. Run each tail through the tube to the far side and trim it so it disappears inside.

Size checkpoint: The letter should still measure 4.5 in (11.4 cm) tall. The appliqués should stick out no more than 0.25 in (0.6 cm) past the left edge.

Hardware: Open a jump ring and pass it through 2 sc at the highest point of the top curve. Hook it onto the end of the keyring chain and close it. Use the second jump ring to hang the heart from the 1 in (2.5 cm) chain, then hang that chain from the keyring.

Border

This keychain has no crocheted border. A round tube has no flat edge to frame. Its only edges are its two closed tips, and the stitch counts above shape them.

  • Bottom tip: Rnds 1–3 grow from 6 to 12 to 18 sts. Each round adds 6 sts, so the tip is round and blunt.
  • Top tip: Rnds 37–38 go down from 18 to 12 to 6 sts. Each round removes 6 sts, which mirrors the bottom tip exactly.

Why the math works: Both tips change by 6 sts per round and pass through the same three counts (6, 12, 18), so the two ends of the S match. All 33 rounds in between (Rnds 4–36) have exactly 18 sts, so the tube stays 1 in (2.5 cm) thick from end to end. The curves come only from stitch height, not from stitch count.

Final Blocking

  1. Before you attach the hardware, lightly mist the letter with water.
  2. Lay it flat on a towel. Shape the S with your fingers so both curves look even.
  3. Check the size: 4.5 in (11.4 cm) tall and 3.5 in (8.9 cm) wide.
  4. If the flower petals or leaf tips curl, pin them flat.
  5. Let it dry completely, at least 6 hours.
  6. Take out the pins and use a fingertip to fluff any flattened spots in the stuffing.

Final Quality-Control Checklist

  • Tube has 18 sts in every round from Rnd 3 to Rnd 36
  • The two curves bend in opposite directions and are about the same size
  • Stuffing is firm and even, with no lumps or gaps
  • Both tips are cinched closed with no holes
  • 2 flowers, 6 leaves, and 5 berries are sewn on securely
  • No yarn tails are visible
  • Jump rings are fully closed
  • Letter measures 4.5 in (11.4 cm) by 3.5 in (8.9 cm)

Troubleshooting

Curves are too open: Use less stuffing in the curves or pull the inner shaping strand tighter. You can also add one Curve Round to each curve.

Curves are too tight or the tube kinks: Take out one Curve Round from each curve, or use hdc instead of dc.

The S is lopsided: One curve has probably drifted around the tube. Check the Side A marker every few rounds and line it up with its stitch column again.

Stuffing shows through: Your tension is too loose. Go down a hook size, or use a little less fiberfill.

Heart has a gap at the top: Close it with 2–3 extra whipstitches before you cinch Rnd 9.

Petals flare instead of lying flat: Mist them, pin them flat, and let them dry.

Care

Spot clean with a damp cloth and mild soap, then air dry flat. Don’t soak the keychain, because water can tarnish the gold hardware.

Cream quilted handbag displaying crocheted flower and snail charms in pink, green, and white on wooden table.

Final Notes

The measurements build in three steps. A gauge of 12 sc x 13 rounds = 2 in (5.1 cm) gives a tube 18 sts around and 3 in (7.6 cm) in circumference. Two sets of 11 Curve Rounds, bending opposite ways, turn that tube into a 4.5 in (11.4 cm) by 3.5 in (8.9 cm) S. The appliqués and hardware sit on top without changing that size.

Make one for your own initial, or stitch a few as gifts.

Happy crocheting!

Leave a Comment