Frosted Petal Bauble Ornament Crochet Pattern

The Frosted Petal Bauble is a lacy, flat Christmas ornament worked in crochet thread. It has a ten-petal open flower in the center, a smooth ring of single crochet around the flower, a scalloped edge of ten small fans, a little rectangular cap, and a chain hanging loop. It looks like a classic glass bauble, but it is light and soft.

The sample is cream, which looks like frost or vintage lace. The same pattern works in festive green, deep red, or gold. Make one in each color for a small matching set for the tree, gift tags, or a window. Each ornament uses only one color.

This pattern uses US crochet terms. The finished bauble is 4 in (10.2 cm) across and 4.4 in (11.2 cm) tall including the cap. The hanging loop adds about 1.75 in (4.4 cm) above the cap.

The ornament is one piece, worked in joined rounds from the center out. You make a small ring, then chain-loop petals, then a round that ties the petal tips together, then a solid single crochet ring. Two border rounds add the fans and scalloped edge. Last, you work a few short rows for the cap and finish with a chain loop.

Finished Size and Construction

  • Finished size: 4 in (10.2 cm) across; 4.4 in (11.2 cm) tall with cap
  • Hanging loop: about 1.75 in (4.4 cm) long when folded
  • Skill level: Easy to intermediate
  • Terminology: US crochet terms
  • Yarn weight: Size 3 crochet cotton thread (light fingering / weight 0)
  • Hook: 2.25 mm (US B-1)
  • Number of pieces: 1
  • Layout: Single round motif with a cap and loop at the top
  • Size before border (after Round 4): 2.75 in (7.0 cm) across
  • Border depth (Rounds 5–6): 0.625 in (1.6 cm) on each side
  • Cap: 0.75 in (1.9 cm) wide x 0.4 in (1.0 cm) tall

Materials

Choose a mercerized cotton thread in size 3. It has a soft shine, holds its shape well after blocking, and shows the petal chains clearly. A slightly thicker fingering-weight cotton also works, but your ornament will be a little bigger.

Yarn (per ornament, one color only):

  • Cream: 6 g (about 18 m)
  • Or Green: 6 g (about 18 m)
  • Or Red: 6 g (about 18 m)
  • Or Gold: 6 g (about 18 m)

To make all four ornaments shown on the tree, you need 6 g (about 18 m) of each color. These amounts include a margin of about 20% for your test piece, weaving in ends, and small differences in tension.

Tools:

  • 2.25 mm (US B-1) crochet hook
  • Tapestry needle with a small eye
  • Scissors
  • 1 stitch marker
  • Blocking mat or folded towel
  • Rust-proof pins
  • Spray bottle with water
  • Optional: liquid fabric stiffener or starch

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • st(s) – stitch(es)
  • sp – space
  • RS – right side
  • rep – repeat

Special stitch – Fan: In the same stitch, work (dc, ch 1) 4 times, then 1 more dc. One Fan has 5 dc and 4 ch-1 spaces.

Gauge and Checkpoints

Exact gauge isn’t critical for an ornament, but it does change the final size and how the petals sit. Use Rounds 1–4 as your test. If the size is right, keep going on the same piece.

Checkpoints:

  • After Round 1: center ring is 0.75 in (1.9 cm) across.
  • After Round 2: petals measure about 2 in (5.1 cm) tip to tip when gently flattened.
  • After Round 4: circle is 2.75 in (7.0 cm) across. This is your main gauge check.
  • After Round 6: bauble is 4 in (10.2 cm) across.
  • After the cap: total height is 4.4 in (11.2 cm).

If your piece is too big after Round 4, try a 2 mm (US 4 steel) hook or work tighter chains. If it is too small, try a 2.5 mm (US C-2) hook. If the circle cups like a bowl, your Round 3 chains are too tight; work them looser. If it ruffles, your Round 4 stitches are too loose; use one hook size smaller for that round only.

Cream-colored crocheted snowflake ornament with delicate twisted rope details displayed on warm wooden surface.

Pattern

Work every round with the RS facing. Don’t turn unless the pattern tells you to. The ch 1 at the start of a round doesn’t count as a stitch.

Center Ring

Round 1: Ch 6, sl st in the first ch to form a ring. Ch 1, work 20 sc in the ring. Sl st in the first sc to join. (20 sc)

Pull the ring snug, but keep a small open hole in the center, about 0.25 in (0.6 cm) wide. The hole is part of the design.

Petals

Round 2: Ch 1, sc in the same st as the join, ch 10, skip next st, sc in next st, ch 10, skip next st; rep from * 8 more times. Sl st in the first sc to join. (10 sc, 10 ch-10 loops)*

Each ch-10 loop is one petal. Skipping one stitch between petals spaces the loops evenly so they don’t bunch.

Joining the Petal Tips

Round 3: Sl st in each of the first 5 ch of the first loop, which brings you to the petal tip. Ch 1, sc around the loop (put your hook through the whole ch-10 loop, not into a single chain), ch 5. Sc around the next ch-10 loop at its tip, ch 5; rep from * 8 more times. Sl st in the first sc to join. (10 sc, 10 ch-5 spaces)*

Each sc pinches a petal tip to a point, so every loop becomes a long, narrow petal. The ch-5 spaces form the base of the outer ring.

Solid Ring

Round 4: Ch 1, sc in the same st as the join, 5 sc in the next ch-5 sp. Sc in next sc, 5 sc in next ch-5 sp; rep from * 8 more times. Sl st in the first sc to join. (60 sc)*

This is a conversion round. The count is 10 sc (one in each sc from Round 3) + 50 sc (5 in each of the ten ch-5 spaces) = 60 sc, or 6 sc per petal section.

Measure now: the circle should be 2.75 in (7.0 cm) across. Place a marker in the first sc of this round.

Border

The border is two rounds: a Fan round and a scalloped single crochet edge. It adds 0.625 in (1.6 cm) all the way around, so the bauble grows from 2.75 in (7.0 cm) to 4 in (10.2 cm) across.

Border gauge: After blocking, one Fan repeat from Round 5 plus its edging from Round 6 covers about 1.25 in (3.2 cm) of the outer edge.

Round 5 (Fan round): Ch 1, sc in the same st as the join (this sc sits above a petal tip). Skip next 2 sts, Fan in next st, skip next 2 sts, sc in next st; rep from * 8 more times, skip next 2 sts, Fan in next st, skip last 2 sts. Sl st in the first sc to join. (10 sc, 10 Fans: 50 dc and 40 ch-1 sps)*

Why the math works: Each repeat uses exactly 6 stitches of Round 4: 1 sc + 2 skipped + 1 Fan stitch + 2 skipped = 6. Ten repeats use 10 x 6 = 60 stitches, which matches the Round 4 count. Each sc sits above a petal tip, so each Fan lands centered between two petals, like the ribs of a bauble.

Round 6 (Scalloped edge): Ch 1, sc in the same sc as the join. Sc in the first dc of the Fan, (2 sc in next ch-1 sp, sc in next dc) 4 times, sc in next sc; rep from * around. On the last repeat, leave out the final sc and sl st in the first sc to join instead. (140 sc)*

Count per repeat: 1 sc in the base sc + 1 sc in the first dc + 4 x (2 sc + 1 sc) = 1 + 1 + 12 = 14 sc. Ten repeats give 10 x 14 = 140 sc.

Why the math works: Round 6 puts 14 stitches over the stitches of each Fan but only 1 stitch in the low sc between fans. The fan tops sit high and the base sc stays low, so each section curves outward into a scallop, giving ten even scallops. Fasten off and weave in the end.

Cap

You work the cap in rows over 6 stitches at the top of the bauble. Pick any scallop to be the top. Number its stitches from 1 to 14, starting with the base sc. The center dc of the Fan sits under stitch 8. Working the cap over stitches 5–10 keeps it centered.

Row 1: With RS facing, join the thread with a standing sc in stitch 5, then sc in the next 5 sts. Turn. (6 sc)

Rows 2–4: Ch 1, sc in each st across. Turn. (6 sc)

The cap now measures 0.75 in (1.9 cm) wide and 0.4 in (1.0 cm) tall. Its flat top and straight sides look like the metal cap of a glass bauble.

Hanging Loop

At the end of Row 4, don’t turn. Sl st in the next 2 sts along the top of the cap so you are at stitch 3. Ch 40, then sl st in stitch 4 of the cap top. Fasten off.

The ch 40 folds into a loop about 1.75 in (4.4 cm) long. For a longer loop, add chains in sets of 10. Each extra 10 ch adds about 0.45 in (1.1 cm) to the folded loop.

Weave all ends along the back of the single crochet rounds, where they won’t show through the open petals.

Final Blocking

Blocking straightens the petals and evens out the scallops.

  1. Wet it. Soak the ornament in cool water or spray it until damp all the way through. For a stiffer ornament, dip it in diluted fabric stiffener instead.
  2. Press out the water. Roll it in a towel and press gently. Don’t wring it.
  3. Mark a guide. Draw a 4 in (10.2 cm) circle on your blocking mat.
  4. Pin the center. Put one pin through the center ring.
  5. Pin the petals. Pull each petal straight out from the center so all ten tips meet the Round 4 ring evenly.
  6. Pin the scallops. Put one pin at the top of each Fan, on the guide circle. Pull the low point between fans slightly inward.
  7. Square the cap. Pin both top corners so the sides are straight.
  8. Pin the loop. Lay it straight up with no twist.
  9. Let it dry. Leave it pinned until completely dry. This takes 6–12 hours, or up to 24 hours if you used stiffener.

Final Quality-Control Checklist

  • [ ] Center hole is open and round, about 0.25 in (0.6 cm) wide.
  • [ ] There are exactly 10 petals, all the same length and each pinched to a point.
  • [ ] Round 4 has 60 sc and lies flat.
  • [ ] There are 10 Fans, each with 5 dc.
  • [ ] Round 6 has 140 sc and 10 even scallops.
  • [ ] Bauble measures 4 in (10.2 cm) across.
  • [ ] Cap is centered over a Fan and is 0.75 in (1.9 cm) wide.
  • [ ] Total height is 4.4 in (11.2 cm) without the loop.
  • [ ] Loop is about 1.75 in (4.4 cm) long and not twisted.
  • [ ] All ends are woven in on the back.

Troubleshooting

The center hole closed up. The starting tail was pulled too tight. Leave the tail loose, or start with a ch-7 ring.

The petals are twisted. The ch-10 loops twisted before Round 3. Before each Round 3 sc, flatten the loop so both sides lie side by side.

The ornament cups. The Round 3 chains are too tight. Redo Round 3 with ch 6 instead of ch 5, and still work 5 sc into each space in Round 4 so the count stays at 60.

The edge ruffles. The dc are too loose. Work Rounds 5–6 with a 2 mm hook.

The scallops look flat. Make sure the sc between fans goes into the Round 5 base sc, not into a dc. Pin each low point inward when blocking.

The cap is off-center. Recount the top scallop from its base sc. The cap starts on stitch 5 and ends on stitch 10.

The Round 6 count is off. Count one Fan section at a time. Each section must have 14 sc.

Care

Hand wash in cool water with mild soap, press dry in a towel, and re-block flat. Store flat or hanging, where nothing heavy can crush the petals.

Crocheted snowflake ornament in cream hanging from a pine branch against warm holiday bokeh lights.

Final Notes

The size of this ornament comes from a simple measurement chain. Round 1 makes a 20-sc center ring 0.75 in (1.9 cm) across. Round 2 adds 10 petals. Round 3 pinches the tips, and Round 4 turns them into a 60-stitch ring 2.75 in (7.0 cm) across. Round 5 splits those 60 stitches into 10 repeats of 6 to make 10 Fans. Round 6 adds 14 sc per Fan, for 140 sc and a finished size of 4 in (10.2 cm). The 4-row cap adds 0.4 in (1.0 cm), for a total height of 4.4 in (11.2 cm), and the loop adds 1.75 in (4.4 cm).

If your Round 4 checkpoint is right, the rest of the ornament will come out the right size. Try cream for a frosted look, then make green, red, and gold for a full tree set.

Happy crocheting!

Leave a Comment