Lavender Leaf Lace Grocery Bag Holder Crochet Pattern

Plastic grocery bags seem to multiply under the sink. This holder keeps them in one tidy, good-looking place. You stuff bags in at the top and pull them out one at a time from the cinched bottom.

The Lavender Leaf Lace holder is worked in a soft purple cotton. The body is a lattice of pointed leaves with a center vein. Each new tier of leaves sits between the leaves below it, so you get a diamond pattern. Above the lace, an eyelet round, a row of scallops, and a solid band finish the top. A butter-yellow version looks just as nice in a bright kitchen.

The pattern uses US crochet terms. The finished holder is 7.5 in (19.1 cm) wide at its widest when flat, 6.25 in (15.9 cm) wide at the top, and 14.75 in (37.5 cm) tall without the strap.

Construction: You work the body in joined rounds from the bottom opening up. It starts with a short increase section, then the leaf lace, then the top band. The strap is worked in rows straight off the top rim and slip-stitched to the opposite side. A separate drawstring with popcorn ends goes through the bottom eyelets and ties in a bow.

Finished Size and Construction

  • Finished size: 7.5 in (19.1 cm) wide at the widest point, 6.25 in (15.9 cm) wide at the top, 14.75 in (37.5 cm) tall
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Medium (#4) worsted cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 1 body (strap worked on) + 1 drawstring
  • Layout: Single tube, worked bottom-up in the round
  • Lace body size (through Rnd 22): 7.5 in (19.1 cm) wide × 11 in (27.9 cm) tall
  • Size before top band: 11 in (27.9 cm) tall
  • Top band depth: 3.75 in (9.5 cm)
  • Strap: 1 in (2.5 cm) wide × 18 in (45.7 cm) long
  • Drawstring: about 30 in (76.2 cm) long

Materials

Yarn: Use a smooth, mercerized or combed worsted cotton. Cotton holds the lace shape, doesn’t stretch out under the weight of bags, and washes well. Avoid fuzzy or very splitty yarns, because the leaf decreases need clear stitches.

  • Main color (purple or butter yellow): 150 g, about 255 m (279 yd)

These quantities include a margin of about 15 percent for your gauge swatch and the drawstring.

Tools:

  • 5.0 mm (H-8) crochet hook
  • Tapestry needle
  • 2 stitch markers
  • Scissors
  • Measuring tape
  • Rust-proof pins and a rolled towel or empty 2-liter bottle for blocking

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • rep – repeat
  • dc3tog / dc4tog / dc5tog – yarn over, insert hook in next st, pull up a loop, yarn over, pull through 2 loops; rep from * across 3 (4, 5) sts, then yarn over and pull through all remaining loops on the hook. Counts as 1 st.

Special stitches

  • Fan: (dc, ch 1, dc, ch 1, dc) in the same st. Counts as 5 sts: 3 dc and 2 ch.
  • Popcorn: Work 5 dc in the indicated st. Drop the loop, insert the hook in the top of the first dc, pick up the dropped loop, and pull it through.

Stitch counting: In this pattern every chain counts as 1 st. This keeps the lace repeat at exactly 12 sts.

Gauge and Checkpoints

  • Solid dc gauge: 16 dc and 8 rounds = 4 in (10.2 cm)
  • Lace gauge: One 12-st repeat = 3 in (7.6 cm) wide. One two-round leaf tier = 1 in (2.5 cm) tall.
  • Strap gauge (sc rows): 16 sts and 18 rows = 4 in (10.2 cm)

Test first: Work Rnds 1–6 as your gauge piece. If they measure right, keep going; the swatch is the start of the holder.

Checkpoints:

  • After Rnd 1: The ring is 7.5 in (19.1 cm) around, or 3.75 in (9.5 cm) across when flat.
  • After Rnd 4: 15 in (38.1 cm) around, 2 in (5.1 cm) tall
  • After Rnd 6: 3 in (7.6 cm) tall; each 12-st repeat is 3 in (7.6 cm) wide
  • After Rnd 14: 7 in (17.8 cm) tall
  • After Rnd 22: 11 in (27.9 cm) tall, 7.5 in (19.1 cm) flat width
  • After Rnd 31: 14.75 in (37.5 cm) tall

If your gauge is too big (more than 7.5 in or 19.1 cm across after Rnd 4), go down to a 4.5 mm hook.

If your gauge is too small, go up to a 5.5 mm hook.

Most problems with height show up in the dc rounds, so measure those first.

Close-up of purple crochet lace fabric with diamond lattice pattern and decorative scalloped edges.

Body: Base Rounds

Ch 30. Join with a sl st to the first ch to form a ring, making sure the chain is not twisted.

Rnd 1: Ch 3 (counts as dc), dc in each remaining ch around. Join with a sl st to the top of the beginning ch-3. (30 dc)

Rnd 2 (eyelet round): Ch 4 (counts as dc + ch 1), sk next st, dc in next st, ch 1, sk next st; rep from * 13 more times. Join to the 3rd ch of the beginning ch-4. (15 dc + 15 ch-1 sps = 30 sts)

These 15 eyelets will hold the drawstring.

Rnd 3 (growth): Ch 3 (counts as dc), 2 dc in next ch-1 sp, dc in next dc, 2 dc in next ch-1 sp; rep from * 13 more times. Join. (45 dc)

Rnd 4 (growth): Ch 3 (counts as dc), dc in next st, 2 dc in next st, dc in each of next 2 sts, 2 dc in next st; rep from * 13 more times. Join. (60 dc)

The two growth rounds make the rounded, fan-like base you see in the photo.

Body: Leaf Lace Setup

Rnd 5: Ch 4 (counts as dc + ch 1), (dc, ch 1, dc) in the same st as the join. This is the first Fan.

Then sk 2 sts, sc in next st, ch 5, sk 5 sts, sc in next st, sk 2 sts.

Fan in next st, sk 2 sts, sc in next st, ch 5, sk 5 sts, sc in next st, sk 2 sts; rep from * 3 more times. Join to the 3rd ch of the beginning ch-4.

(5 repeats × [Fan 5 + sc 1 + ch 5 + sc 1] = 60 sts)

Rnd 6: Ch 3 (counts as dc). Dc in ch-1 sp, dc in dc, dc in ch-1 sp, dc in dc. You now have 5 dc over the first Fan; this is a leaf body.

Ch 3, sk sc, sc in ch-5 sp, ch 3, sk sc.

5 dc across next Fan (dc in each dc and ch-1 sp), ch 3, sk sc, sc in ch-5 sp, ch 3, sk sc; rep from * 3 more times. Join to the top of the beginning ch-3.

(5 × [5 dc + ch 3 + sc + ch 3] = 60 sts)

Body: Leaf Lace Pattern (Rnds 7–10, Repeat)

Each round has two jobs. It closes the current leaves into points, and it starts new leaves in the sc between them. This offset is what builds the diamond lattice.

The four rounds differ only in where they start, so the joins stay neat.

Rnd 7 (A, start on a leaf): Ch 2, dc4tog over the next 4 dc (counts as the first dc5tog).

Ch 3, sk ch-3, Fan in next sc, ch 3, sk ch-3.

Dc5tog over next 5 dc, ch 3, sk ch-3, Fan in next sc, ch 3, sk ch-3; rep from * 3 more times. Join to the top of the first dc4tog.

(5 × [1 + 3 + 5 + 3] = 60 sts)

Rnd 8 (B, start on a tip): Ch 1, sc in the same st. Ch 3, 5 dc across the next Fan, ch 3.

Sc in next dc5tog, ch 3, 5 dc across next Fan, ch 3; rep from * 3 more times. Join to the first sc.

(60 sts)

Rnd 9 (A, start on a sc): Ch 4 (counts as dc + ch 1), (dc, ch 1, dc) in the same sc. This is the first Fan.

Ch 3, sk ch-3, dc5tog over next 5 dc, ch 3, sk ch-3.

Fan in next sc, ch 3, sk ch-3, dc5tog over next 5 dc, ch 3, sk ch-3; rep from * 3 more times. Join to the 3rd ch of the beginning ch-4.

(60 sts)

Rnd 10 (B, start on a Fan): Ch 3 (counts as dc). Work 4 more dc across the Fan, for 5 dc. Ch 3, sc in next dc5tog, ch 3.

5 dc across next Fan, ch 3, sc in next dc5tog, ch 3; rep from * 3 more times. Join to the top of the beginning ch-3.

(60 sts)

Rnds 11–22: Rep Rnds 7–10 three more times.

You now have 8 leaf tiers (16 rounds) and 60 sts. The body measures 11 in (27.9 cm) tall and 7.5 in (19.1 cm) wide when flat.

Rnd 22 ends with open 5-dc leaves that the next round will close.

Top Border Band

Border gauge: The top band uses the solid gauge of 16 sts = 4 in (10.2 cm).

50 sts make a 12.5 in (31.8 cm) circumference. That lies flat at 6.25 in (15.9 cm) wide, or 25 sts per side.

Rnd 23 (conversion round): Ch 2 (counts as hdc) in the first dc, dc3tog over the next 3 dc, hdc in the next dc. Then 3 sc in the ch-3 sp, sc in sc, 3 sc in the next ch-3 sp.

Hdc in next dc, dc3tog over next 3 dc, hdc in next dc, 3 sc in ch-3 sp, sc in sc, 3 sc in ch-3 sp; rep from * 3 more times. Join.

Per repeat: 7 sc worked 1 per existing stitch (6 ch + 1 sc), plus 3 sts worked over the 5 leaf sts (2 sts removed), for 10 sts.

Total: 5 × 10 = 50 sts (25 per side)

This round closes the last leaves and narrows the neck.

Rnd 24 (eyelets): Ch 4 (counts as dc + ch 1), sk next st, dc in next st, ch 1, sk next st; rep from * 23 more times. Join to the 3rd ch. (25 dc + 25 ch-1 sps = 50 sts)

Rnd 25: Ch 1, sc in each dc and each ch-1 sp around. Join. (50 sc)

Rnd 26 (scallops): Ch 1, sc in next st, sk 1 st, 4 dc in next st, sk 2 sts; rep from * 9 more times. Join to the first sc.

(10 scallops = 10 sc + 40 dc = 50 sts)

Each scallop uses 5 sts and makes 5 sts, so the count stays at 50.

Rnd 27 (leveling): Ch 3 (counts as dc) in the first sc. Hdc in the 1st dc, sc in the 2nd and 3rd dc, hdc in the 4th dc.

Dc in next sc, hdc in next dc, sc in each of next 2 dc, hdc in next dc; rep from * 8 more times. Join. (50 sts)

Rnds 28–30: Ch 3 (counts as dc), dc in each st around. Join. (50 dc each round)

Rnd 31: Ch 1, sc in each st around. Join. (50 sc) Do not fasten off.

Why the math works: The lace has 5 repeats of 12, so 60 sts. Taking 2 sts out of each repeat leaves 5 × 10 = 50. Then 50 divides evenly into 25 eyelet pairs and 10 five-stitch scallops. Every round of the band holds 50 sts, so the top stays straight and doesn’t ruffle.

The band adds 3.75 in (9.5 cm). That brings the body to 14.75 in (37.5 cm).

Hanging Strap

Row 1: Ch 1, sc in each of the first 4 sts of Rnd 31. Turn. (4 sc)

Rows 2–81: Ch 1, sc in each st across. Turn. (4 sc)

The strap measures 18 in (45.7 cm) long and 1 in (2.5 cm) wide.

Lay the body flat with the strap at one fold. Count to sts 26–29 of Rnd 31, which are exactly 25 sts away and directly opposite. With the strap untwisted, sl st the last row of the strap to those 4 sts through both layers. Fasten off and weave in the ends.

Drawstring

Ch 101. Sl st in the back bump of the 2nd ch from the hook and in each ch across. (100 sl sts)

This makes a firm cord about 30 in (76.2 cm) long.

End knob: Ch 3, Popcorn in the 3rd ch from the hook, sl st into the last sl st of the cord. Fasten off.

Join yarn at the other end and make a matching knob.

Thread the cord in and out through the 15 eyelets of Rnd 2. Pull to cinch the opening to about 1.5 in (3.8 cm), then tie a bow.

Final Blocking

  1. Weave in all ends along solid stitches, never through the lace arches.
  2. Soak the holder in cool water for 10 minutes, then gently press out the water. Don’t wring it.
  3. Roll it in a towel to remove the extra moisture.
  4. Slide a rolled towel or an empty 2-liter bottle inside the body.
  5. Pin the top band to 6.25 in (15.9 cm) flat width, and ease the widest point to 7.5 in (19.1 cm).
  6. Open each leaf and point its tips straight up. Even out the chain arches.
  7. Pin the scallops into even curves.
  8. Let it dry completely, then remove the form and lay the strap flat to dry.

Final Quality-Control Checklist

  • Rnd 4 has 60 dc, and the base is 15 in (38.1 cm) around.
  • Every lace round counts 60 sts.
  • Leaves alternate positions from tier to tier, making clear diamonds.
  • There are 8 complete leaf tiers.
  • Rnds 23–31 have 50 sts each, with 10 even scallops.
  • The strap is attached exactly opposite its starting point and is not twisted.
  • The drawstring passes through all 15 eyelets and the bow ties cleanly.
  • The finished height is 14.75 in (37.5 cm).

Troubleshooting

Leaves lean to one side: You probably skipped the wrong chain spaces. Each Fan goes only into a sc, and each dc5tog uses exactly 5 dc.

The lace count is off: Count each repeat as 12 sts. Chains count as stitches.

The top ruffles: Rnd 23 didn’t decrease. Check for the hdc, dc3tog, hdc over every leaf.

The base cups too sharply: Your gauge is tight. Go up a hook size for Rnds 1–4.

The strap twists when hanging: Unpick the attaching sl sts, flatten the strap, and rejoin it.

Bags won’t come out: Loosen the bow so the bottom opening is about 1.5 in (3.8 cm).

Care

Machine wash cold on a gentle cycle in a mesh bag, or hand wash. Reshape it while damp and lay it flat to dry.

Purple and yellow crocheted tissue holders with openwork patterns hanging from brass knobs on a cream door.

Final Notes

The measurement chain runs like this:

  • A 30-st ring is 7.5 in (19.1 cm) around.
  • Rnd 4 reaches 60 sts at 15 in (38.1 cm) around.
  • Five 3 in (7.6 cm) leaf repeats keep the lace at 7.5 in (19.1 cm) flat.
  • Eight 1 in (2.5 cm) tiers take the body to 11 in (27.9 cm).
  • The 50-st top band adds 3.75 in (9.5 cm), for a finished height of 14.75 in (37.5 cm).

If you check your gauge at each checkpoint, the holder will come out the right size.

Happy crocheting!

Leave a Comment