This holder is a mint diamond-mesh tube for storing plastic grocery bags. You push bags in at the top and pull them out one at a time through the oval opening at the bottom. A sturdy covered ring at the top hangs on a cabinet hook or door knob.
On the front is a small spaniel face in a Santa hat. The colors are soft mint for the body and caramel brown for the head and curly ears. Cream is used for the blaze, muzzle, hat brim and pompom, red for the hat, and black for the nose and mouth.
This pattern uses US crochet terms. The body measures 14.0 in (35.6 cm) tall and 8 in (20.3 cm) wide at its widest point, laid flat. With the hanger, the holder is 18.8 in (47.8 cm) long.
You work the body as one seamless tube from the bottom up. It starts with a single crochet band, then 20 rounds of chain mesh, then a single crochet rim. A tab worked off the rim wraps around a covered ring. You sew the seven appliqué pieces into one face unit, then sew that unit to the front.
Finished Size and Construction
- Finished size: body 14.0 in (35.6 cm) tall; 18.8 in (47.8 cm) with the hanger
- Width (flat): 8 in (20.3 cm) at the widest point, 6 in (15.2 cm) at the rim, 4.5 in (11.4 cm) at the bottom opening
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hooks: 5.0 mm (H-8) for the body, 4.0 mm (G-6) for the appliqués
- Number of pieces: 1 body, 1 covered ring, 7 appliqué pieces
- Layout: one holder with the face unit centered on the front
- Face unit size: 5.5 in (14.0 cm) wide x 5 in (12.7 cm) tall
- Size before border (Rnds 1–24): 13.1 in (33.3 cm) tall
- Border depth: top rim 0.9 in (2.3 cm); the bottom edge is a flat slip-stitch round
Materials
Use a smooth worsted-weight cotton. Cotton holds the mesh shape and won’t sag when the holder is full. Avoid fuzzy or splitty yarn, because the bobbles need clear stitch definition.
- Mint (A): 100 g / 160 m
- Caramel brown (B): 25 g / 40 m
- Cream (C): 15 g / 24 m
- Red (D): 10 g / 16 m
- Black (E): 2 g / 3 m
All quantities include a margin of about 15% for swatching and differences in tension.
Tools: 5.0 mm (H-8) and 4.0 mm (G-6) hooks; a 3 in (7.6 cm) plastic or metal ring; two 8 mm black safety eyes; stitch markers; a tapestry needle; scissors; a tape measure; pins and a blocking surface.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sc2tog – single crochet 2 together
- inc – 2 sc in the same stitch
- sp(s) – space(s)
- sk – skip
- BLO – back loop only
- RS / WS – right side / wrong side
Bobble (bob): *Yarn over, insert hook in stitch, pull up a loop, yarn over, pull through 2 loops. Repeat from * 2 more times in the same stitch (4 loops on hook). Yarn over and pull through all 4 loops. Work bobbles on WS rows so they pop out on the RS.
Gauge and Checkpoints
Body gauge (5.0 mm): 16 sc x 18 rounds = 4 in (10.2 cm).
Appliqué gauge (4.0 mm): 18 sc x 20 rows = 4 in (10.2 cm).
Mesh guide: one ch-5 mesh round adds 0.55 in (1.4 cm). One ch-6 mesh round adds 0.65 in (1.7 cm). Measure flat and relaxed.
Make the pup’s head first as your test piece. It should measure 2.5 in (6.4 cm) across.
Body checkpoints (measure flat):
- After Rnd 4: 7.5 in (19.1 cm) wide, 0.9 in (2.3 cm) tall
- After Rnd 8: 3.1 in (7.9 cm) tall
- After Rnd 20: 10.9 in (27.7 cm) tall, 8 in (20.3 cm) wide
- After Rnd 24: 13.1 in (33.3 cm) tall
- After Rnd 28: 14.0 in (35.6 cm) tall, rim 6 in (15.2 cm) wide
If your piece is too big, go down one hook size. If it is too small, go up one hook size. If only the mesh height is off, add or remove one round in the ch-6 section (Rnds 9–20). Never change the loop count.

Body
Use the 5.0 mm hook and A. Work in joined rounds with the RS facing you. Do not turn.
Bottom Band
Foundation: Ch 36, sl st in first ch to form a ring without twisting.
Rnd 1: Ch 1, sc in each ch around, join with sl st to first sc. (36 sc)
Rnd 2: Ch 1, sc in each sc around, join. (36 sc)
Rnd 3: Ch 1, sc in next 2 sc, inc in next sc, repeat from * 12 times total, join. (48 sc)
Rnd 4: Ch 1, sc in next 3 sc, inc in next sc, repeat from * 12 times total, join. (60 sc)
The band flares like a shallow bowl and lies 7.5 in (19.1 cm) wide.
Mesh
Rnd 5: Ch 1, sc in first sc, ch 5, sk 3 sc, sc in next sc, repeat from * 14 times total, ch 2, sk last 3 sc, dc in first sc. (15 loops)
The ch-2 + dc counts as the 15th loop and puts your hook at the center of that loop. Check the count: 1 sc + 14 repeats x 4 stitches = 57 stitches, + 3 skipped = 60.
Rnds 6–8: Ch 1, sc around post of joining dc, ch 5, sc in next sp, repeat from * 14 times total, ch 2, dc in first sc. (15 loops)
Rnds 9–20: Ch 1, sc around post of joining dc, ch 6, sc in next sp, repeat from * 14 times total, ch 3, dc in first sc. (15 loops)
The longer chains widen the middle so it holds more bags.
Rnds 21–23: Work as Rnds 6–8. (15 loops)
Rnd 24: Ch 1, sc around post of joining dc, ch 5, sc in next sp, repeat from * 14 times total, ch 5, sl st in first sc. (15 loops)
This round ends with a full ch-5 loop so the rim starts cleanly. The body is now 13.1 in (33.3 cm) tall. Don’t fasten off. Continue with the Border.
Appliqués
Use the 4.0 mm hook. Leave a 12 in (30.5 cm) sewing tail on each piece.
Head (B)
Rnd 1: Magic ring, 6 sc. (6 sc)
Rnd 2: Inc in each st. (12 sc)
Rnd 3: Sc, inc, repeat 6 times. (18 sc)
Rnd 4: Sc in next 2, inc, repeat 6 times. (24 sc)
Rnd 5: Sc in next 3, inc, repeat 6 times. (30 sc)
Rnd 6: Sc in next 4, inc, repeat 6 times. (36 sc)
Fasten off. The head measures 2.5 in (6.4 cm) across.
Muzzle (C)
Rnd 1: Ch 7. Sc in 2nd ch from hook and next 4 ch, 3 sc in last ch. Working along the other side of the chain, sc in next 4 ch, 2 sc in last ch. (14 sc)
Rnd 2: Inc in first sc, sc in next 4, inc in each of next 3, sc in next 4, inc in each of last 2. (20 sc)
Fasten off. The oval measures 1.75 in (4.4 cm) x 1 in (2.5 cm).
Blaze (C)
Row 1: Ch 9, sc in 2nd ch from hook and each ch across. (8 sc)
Row 2: Ch 1, turn, sc across. (8 sc)
Fasten off. The strip measures 1.8 in (4.6 cm) x 0.4 in (1.0 cm).
Ears (B, make 2)
Row 1 (RS): Ch 5, sc in 2nd ch from hook and next 3 ch. (4 sc)
Row 2 (WS): Ch 1, turn, inc in first, bob, sc, inc in last. (6 sts)
Rows 3, 5, 7, 9, 11, 13 (RS): Ch 1, turn, sc in each st across. (These rows keep the previous row’s count.)
Row 4: Ch 1, turn, inc in first, bob, sc 2 times, inc in last. (8 sts)
Rows 6 and 8: Ch 1, turn, sc in first, bob, sc 3 times, sc in last. (8 sts)
Row 10: Ch 1, turn, inc in first, bob, sc 3 times, inc in last. (10 sts)
Row 12: Ch 1, turn, sc in first, bob, sc 4 times, sc in last. (10 sts)
Row 14: Ch 1, turn, sc2tog, bob, sc 3 times, sc2tog. (8 sts)
Row 15: Ch 1, turn, sc2tog, sc in next 4, sc2tog. (6 sc)
Fasten off. Each ear is a teardrop 3 in (7.6 cm) long and 2.2 in (5.6 cm) wide. It is narrow at the top and rounded at the bottom, and the bobble rows give it a curly texture.
Santa Hat (C, then D)
Row 1 (RS): With C, ch 17, sc in 2nd ch from hook and across. (16 sc)
Row 2 (WS): Ch 1, turn, sc in first, bob, sc 7 times, sc in last. (16 sts)
Row 3: Ch 1, turn, sc across. (16 sc) Change to D.
Row 4: Ch 1, turn, sc across. (16 sc)
Row 5: Ch 1, turn, sc2tog, sc in next 12, sc2tog. (14 sc)
Rows 6, 8, 10: Ch 1, turn, sc across. (These rows keep the previous row’s count.)
Row 7: Ch 1, turn, sc2tog, sc in next 10, sc2tog. (12 sc)
Row 9: Ch 1, turn, sc2tog, sc in next 8, sc2tog. (10 sc)
Row 11: Ch 1, turn, sc2tog, sc in next 6, sc2tog. (8 sc)
For Rows 12–17, decrease only at the right edge (as seen from the RS) so the tip leans right:
Row 12 (WS): Ch 1, turn, sc in next 6, sc2tog. (7 sc)
Row 13 (RS): Ch 1, turn, sc2tog, sc in next 5. (6 sc)
Row 14: Ch 1, turn, sc in next 4, sc2tog. (5 sc)
Row 15: Ch 1, turn, sc2tog, sc in next 3. (4 sc)
Row 16: Ch 1, turn, sc in next 2, sc2tog. (3 sc)
Row 17: Ch 1, turn, sc2tog, sc in last st. (2 sc)
Fasten off. Before folding, the hat is 3.5 in (8.9 cm) wide at the brim and 3.4 in (8.6 cm) tall.
Pompom (C)
Rnd 1: Magic ring, 6 sc. (6 sc)
Rnd 2: Inc in each st. (12 sc)
Rnd 3: Sc around. (12 sc)
Rnd 4: Sc2tog 6 times. (6 sc)
Stuff with scraps and close the opening. The pompom measures 0.75 in (1.9 cm).
Assemble the Face Unit
- Insert the safety eyes between Rnds 3 and 4 of the head, 7 stitches apart.
- Sew the blaze up the center of the head, between the eyes.
- Sew the muzzle over the lower head so it overlaps the end of the blaze.
- With E, satin-stitch a rounded triangle nose 0.4 in (1.0 cm) wide at the top of the muzzle. Backstitch a short line below the nose and a shallow smile.
- Sew the top 1 in (2.5 cm) of each ear behind the sides of the head, bobble side out.
- Sew the hat on so the cream brim covers the top of the head and the tops of the ears.
- Fold the hat tip down to the right, tack it in place, and sew the pompom to the tip.
Border
Border gauge: 16 sc = 4 in (10.2 cm), the same as the bottom band.
Top Rim
Rnd 25 (conversion): Ch 1, 3 sc in each of next 4 ch-5 sps, 4 sc in next sp, repeat from * 3 times total, join. (48 sc)
Count: 15 sc (1 per loop) + 33 extra (2 more in every loop, plus 1 more in every 5th loop) = 48 sc.
Rnds 26–28: Ch 1, sc in each sc around, join. (48 sc)
Fasten off. When flattened, each side has 24 sc. At 4 sc per inch, 24 sc = 6 in (15.2 cm).
Why the math works: the mesh measures 16 in (40.6 cm) around at its widest, and 48 sc measures 12 in (30.5 cm). Drawing the top in on purpose keeps the bags inside and makes the rim firm enough to carry the strap.
Bottom Edge
Join A in any free loop of the foundation chain.
Rnd B1: Sl st in each free loop around. (36 sl st, 18 per flattened side)
At 4 sts per inch, 18 sts = 4.5 in (11.4 cm), which matches the opening. This round adds no height and stops the opening from stretching.
Hanger
Strap: Flatten the body and choose a back side. On that side’s 24 sts, join A in st 10 so the strap is centered with 9 sts free on each side.
Row 1: Ch 1, sc in same st and next 5. (6 sc)
Rows 2–12: Ch 1, turn, sc across. (6 sc)
The strap measures 1.5 in (3.8 cm) x 2.7 in (6.9 cm).
Ring: With A, join yarn around the 3 in (7.6 cm) ring.
Rnd 1: Work 60 sc tightly over the ring, packing them so no ring shows. (60 sc)
Rnd 2: Sl st loosely in BLO of each sc. (60 sl st)
The covered ring measures 3.5 in (8.9 cm) across. Fold the strap through the ring and sew Row 12 to the WS of Row 6. That leaves a visible tab of 1.3 in (3.3 cm), so the hanger adds 4.8 in (12.2 cm) in total.
Final Blocking
- Wet the body only, then press out the water in a towel.
- Slip a rolled towel inside to open the mesh.
- Shape it to 8 in (20.3 cm) wide at the middle, 6 in (15.2 cm) at the rim, and 14.0 in (35.6 cm) tall.
- Straighten the diamond columns so they run vertically.
- Let it dry completely.
- Pin the face unit centered on the front, with the top of the hat 1.5 in (3.8 cm) below the rim.
- Whipstitch around the edge of the face unit, catching mesh strands every 0.25 in (0.6 cm). Don’t pull the mesh tight.
Final Quality-Control Checklist
- Every mesh round has 15 loops.
- The diamond columns run straight with no spiral.
- The rim has 48 sc and lies smooth.
- The bottom opening is a firm 4.5 in (11.4 cm).
- The strap is centered and securely sewn.
- No part of the ring shows through the stitches.
- The eyes are secure and the ears hang evenly.
- All ends are woven in.
Troubleshooting
Mesh spirals: you skipped the joining dc post. Always start each round there.
Holder stretches too long: work ch 5 in Rnds 9–20.
Opening too loose: work a second sl st round.
Rim ruffles: use a smaller hook for Rnds 25–28.
Ears curl: steam them lightly and pat flat.
Mesh puckers under the face: sew the face unit again more loosely, with bags inside the holder.
Care
Hand wash in cold water and lay flat to dry. Avoid tumble drying so the bobbles and the safety eyes stay intact.

Final Notes
Each stage sets up the next measurement:
- The 36-stitch opening measures 4.5 in (11.4 cm).
- The band grows to 60 sc and 7.5 in (19.1 cm) wide.
- The 15-loop mesh opens to 8 in (20.3 cm) wide and reaches 13.1 in (33.3 cm) tall.
- The 48-sc rim draws in to 6 in (15.2 cm), with the body at 14.0 in (35.6 cm).
- The hanger brings the total to 18.8 in (47.8 cm).
Check each stage and your Santa Pup will hang straight and hold plenty of bags.
Happy crocheting!