Seashell Lace Hanging Basket Crochet Pattern

This hanging basket has a flat cream back, a coral front pocket worked in rows of open fans, and a neat cream rim. It hangs from a wall knob or hook on a hanger that has a ring at the top and two straps. One standard toilet paper roll fits inside, as do hand towels, cotton pads or hair ties. The solid back panel keeps the basket flat against the wall, and the lace front lets you see what is inside.

The colors are soft cream and warm coral. The fans look like seashells, so the basket suits a bathroom, nursery or entryway. All instructions use US crochet terms.

The finished basket is 8 in (20.3 cm) wide, 4.75 in (12.1 cm) tall without the hanger, and about 4 in (10.2 cm) deep from the wall to the front of the rim. Each hanger strap is 10 in (25.4 cm) long.

Here is the order of work: crochet a half-circle back panel, then a lace front pocket in turned rows that start at the bottom point. Join the curved edges with a single-crochet seam. Next, work three rim rounds around the opening. Make the hanger last and sew its end loops to the rim corners.

Finished Size and Construction

  • Finished size: 8 in (20.3 cm) wide x 4.75 in (12.1 cm) tall x 4 in (10.2 cm) deep
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 3 (back panel, front pocket, hanger)
  • Layout: The back panel has its flat edge at the top. The front pocket is sewn to the back panel’s curved edge, and the hanger is sewn to the two top corners.
  • Back panel size: 8 in (20.3 cm) wide x 4 in (10.2 cm) tall
  • Size before rim border: 8 in (20.3 cm) wide x 4 in (10.2 cm) tall x 4 in (10.2 cm) deep
  • Rim border depth: 0.75 in (1.9 cm), 3 rounds

Materials

Use a smooth 100% cotton or cotton-blend worsted yarn. Cotton gives a firm basket that holds its shape, and it washes well. Do not use acrylic for the lace pocket, because it can sag under weight. Mercerized cotton shows the fan eyelets most clearly.

  • Cream (back panel, seam, rim, hanger): 65 g, about 100 m
  • Coral (front pocket): 45 g, about 69 m

Both amounts include about 15% extra for swatching and weaving in ends.

Tools:
– 4.5 mm (US 7) crochet hook
– Tapestry needle
– 4 locking stitch markers
– Scissors
– Measuring tape
– Blocking mat and rust-proof pins
– Spray bottle

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sk – skip
  • sp – space
  • MR – magic ring
  • st(s) – stitch(es)

Special stitches:
– Fan: 5 dc in the stitch indicated (5 sts).
– Big fan: 7 dc in the stitch indicated (7 sts).
– Open fan: (dc, ch 1) 4 times, then dc, all in the stitch indicated. That makes 5 dc and 4 ch-1 sps, for 9 sts.

The ch-1 sps inside open fans count as stitches in every count below.

Gauge and Checkpoints

Single crochet gauge: 16 sc and 16 rows = 4 in (10.2 cm).
Double crochet gauge: 1 dc row = 0.5 in (1.3 cm).
Fan row gauge: 1 fan row = 0.9 in (2.3 cm) tall at the row ends.

Work the back panel first. It is your gauge piece. Check it at these rows:

  • After Row 8, the straight edge measures 4 in (10.2 cm).
  • After Row 12, the straight edge measures 6 in (15.2 cm).
  • After Row 16, the straight edge measures 8 in (20.3 cm), and the panel is 4 in (10.2 cm) tall.

If the panel comes out too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. Each sc row needs to be 0.25 in (0.6 cm) tall, or the seam will not line up.

To check the fan gauge, work Rows 1–5 of the front pocket in coral. Measure Rows 4 and 5 together at the side edge. They should be 1.8 in (4.6 cm). If they are shorter, work the fan dc a little looser, or go up a hook size for the coral only. The seam depends on this height.

Cream-colored braided rope forms a looped decorative knot against warm reddish-orange wooden surface.

Back Panel (Cream)

Work in turned rows. Ch 1 at the start of each row does not count as a stitch.

Row 1: MR, ch 1, 3 sc in the ring. Turn. (3 sts)
Row 2: Ch 1, inc in each st across. Turn. (6 sts)
Row 3: Ch 1, (sc, inc) 3 times. Turn. (9 sts)
Row 4: Ch 1, (sc in next 2 sts, inc) 3 times. Turn. (12 sts)
Row 5: Ch 1, (sc in next 3 sts, inc) 3 times. Turn. (15 sts)

Rows 6–16: Keep adding 1 sc before the inc in each repeat. Every row has 3 increases, so the count for any row is 3 times the row number.

  • Row 6: 18 sts
  • Row 8: 24 sts
  • Row 10: 30 sts
  • Row 12: 36 sts
  • Row 14: 42 sts
  • Row 16: (sc in next 14 sts, inc) 3 times, for 48 sts

Pull the magic ring closed. Fasten off and weave in the ends.

The curved edge has 48 sts, which is 12 in (30.5 cm) at gauge. The straight edge is made of 16 row ends on each side of the ring, 32 in all.

Front Pocket (Coral)

Work in turned rows. The ch 3 at the start of a row counts as a dc. The ch 1 at the start of a row does not count.

Row 1: MR, ch 3, 6 dc in the ring. Turn. (7 dc)
Row 2: Ch 3, dc in the first st, 2 dc in each remaining st across. Turn. (14 dc)
Row 3: Ch 3, dc in the first st, dc in next st, 2 dc in next st 6 times, dc in the last st. Turn. (21 dc)

Checkpoint: The straight edge now measures 3 in (7.6 cm).

Row 4: Ch 1, sc in the first st, sk 1, fan in next st, sk 1, sc in next st 5 times. Turn. (5 fans + 6 sc = 31 sts)

Row 5: Ch 3, 3 dc in the first sc. This is a half fan of 4 sts. Sc in the center (3rd) dc of the next fan, big fan in the next sc 4 times. Sc in the center dc of the last fan, then 4 dc in the last sc. Turn. (4 big fans + 2 half fans of 4 + 5 sc = 41 sts)

Row 6: Ch 1, sc in the first st. Open fan in the next sc, sc in the center (4th) dc of the next big fan 4 times. Open fan in the next sc, then sc in the top of the turning ch. Turn. (5 open fans + 6 sc = 51 sts)

Row 7: Ch 4 (counts as dc and ch 1). In the first sc, work (dc, ch 1, dc). This makes a half fan of 5 sts. Sc in the center (3rd) dc of the next open fan, open fan in the next sc 4 times. Sc in the center dc of the last open fan, then work (dc, ch 1, dc, ch 1, dc) in the last sc. Turn. (4 open fans + 2 half fans of 5 + 5 sc = 51 sts)

Row 8: Ch 1, sc in the first st. Open fan in the next sc, sc in the center dc of the next open fan 4 times. Open fan in the next sc, then sc in the 3rd ch of the turning ch. (5 open fans + 6 sc = 51 sts)

Fasten off and pull the ring closed.

Checkpoint: Measure along one side edge, from the ring to the top of Row 8. It should be 6 in (15.2 cm): 1.5 in (3.8 cm) for the dc rows plus 4.5 in (11.4 cm) for the fan rows. Rows 6–8 do not add stitches, so the sides curve inward to form a bowl.

Make All Pieces

Piece Qty Color
Back panel 1 Cream
Front pocket 1 Coral
Hanger 1 Cream
Seam and rim – Cream

Assembly layout (front view):

              ( ring )
             /        \
      strap 1          strap 2
         |                |
 [loop]=====RIM 83 sts=====[loop]
 |  back panel: flat edge up    |
  \  front pocket sewn to      /
   \   48-st curved edge      /
    \_____ magic ring ______/

Hanger:
Ring: With cream, ch 10 and sl st to the first ch to form a ring.
Rnd 1: Ch 1, 18 sc in the ring. Sl st to the first sc. (18 sts) The ring is about 1.25 in (3.2 cm) across.

Sl st in each of the next 7 sts so you are in st 8.

Strap 1: Ch 49, then sl st in the 9th ch from the hook to form the end loop. Ch 1, then work 14 sc into the loop and sl st to the first sc. Sc in each of the remaining 40 ch, back toward the ring. Sl st in ring st 9. (40 sc strap = 10 in / 25.4 cm)

Sl st in ring sts 10 and 11.

Strap 2: Work as for Strap 1, then sl st in ring st 12. Fasten off.

Joining

Method: Single-crochet seam with cream.

Put a marker on sts 24 and 25 of the back panel’s curved edge. These are the center bottom of the panel. Hold the pocket against the back panel with wrong sides together and the back panel facing you. Line up the pocket’s magic ring between the two markers. Clip the Row 4 and Row 8 row ends to the back panel with your other markers so the stitches stay evenly spread.

Stitch logic: Start at the right top corner. Work 1 sc through each back-panel curved-edge st and a front row end at the same time. This places 48 sc in all, 24 on each side.

On each side, spread the 24 sc over the front row ends like this:

  • Rows 1–3 (dc): 2 sc per row end, for 6 sc
  • Row 4: 4 sc
  • Row 5: 3 sc
  • Row 6: 4 sc
  • Row 7: 3 sc
  • Row 8: 4 sc

That gives 18 sc over the fan rows and 24 sc per side in total. On the right side, place them from Row 8 down to Row 1. On the left side, place them from Row 1 up to Row 8.

Tension: Keep the seam stitches the same size as your panel stitches. A tight seam makes the pocket pucker. A loose seam makes it gape.

Checkpoint: Measure the basket before the rim. It should be 8 in (20.3 cm) across the top corners, 4 in (10.2 cm) from the top edge to the bottom point, and about 4 in (10.2 cm) deep.

Rim Border (Cream)

Border gauge: 4 sc per inch (2.5 cm). Each round is 0.25 in (0.6 cm) tall.

Join cream at the right top corner. Starting here hides the round joins under a hanger loop. Work in joined rounds without turning. Ch 1 at the start of a round does not count. Sl st to the first sc at the end of each round.

Rnd 1 (conversion round):
– Front side: 1 sc in each of the 51 sts of Row 8. This is 51 worked 1 per stitch + 0 extra = 51.
– Back side: 1 sc in each back-panel row end, 16 per side, and skip the center ring. This is 32 worked 1 per row end + 0 extra = 32.
– Total: 83 sts.

Rnd 2: Ch 1, sc in each st around. (83 sts: 51 front, 32 back)
Rnd 3: Ch 1, sc in each st around. (83 sts: 51 front, 32 back) Fasten off.

Why the math works: The 32 back sts measure 8 in (20.3 cm) at gauge, which matches the straight edge of the panel. The 51 front sts measure 12.75 in (32.4 cm). A half circle with a 4 in (10.2 cm) radius has an arc of about 12.6 in (32.0 cm), so the rim fits the opening without ruffling or pulling in. The rim adds 0.75 in (1.9 cm) to the height, for a total of 4.75 in (12.1 cm).

Attach the hanger: Fold each end loop over a top corner of the rim, at the point where the seam ends. Sew the lower half of each loop flat to the outside of the rim, going through all 3 rim rounds. Make sure neither strap is twisted.

Final Blocking

  1. Spray the whole basket until it is evenly damp.
  2. Stuff the pocket with a rolled hand towel so it forms a smooth, round bowl.
  3. Lay the basket on the mat with the back panel flat. Pin the back panel to 8 in (20.3 cm) wide.
  4. Use your fingers to open each fan so its eyelets show.
  5. Pin the rim so its top edge is straight along the back.
  6. Let it dry completely, which takes 12–24 hours.
  7. Remove the pins and the towel, then hang the basket and check that it sits level.

Final Quality-Control Checklist

  • The back panel has 48 sts on its curved edge and measures 8 in (20.3 cm) x 4 in (10.2 cm).
  • Rows 6–8 of the front each have 51 sts.
  • The seam has 24 sc on each side, and the pocket’s ring sits at the center bottom.
  • Each rim round has 83 sts.
  • The rim is 0.75 in (1.9 cm) deep.
  • Each strap has 40 sc and is 10 in (25.4 cm) long.
  • Both end loops are sewn securely through all 3 rim rounds.
  • All ends are woven in.

Troubleshooting

  • The back panel ruffles: Your rows are too short. Go up a hook size or relax your tension.
  • The back panel cups: Your rows are too tall. Go down a hook size.
  • The pocket is too shallow: The fan rows are shorter than 0.9 in (2.3 cm). Work the dc in the fans a little looser.
  • The fans lean to one side: You missed a center dc. The center is the 3rd dc of a fan or open fan and the 4th dc of a big fan.
  • The seam puckers: Spread the seam stitches exactly as listed. Do not crowd the dc row ends.
  • The rim flares: Check that you have 51 front sts. Extra stitches often come from working into both legs of a turning chain.
  • The roll does not fit: The pocket needs to be 4 in (10.2 cm) deep. Block it again over a towel-wrapped roll.
  • The basket tilts: Make sure both straps are the same length and are sewn at the very corners.

Care

Hand wash in cool water and lay flat to dry, with a towel inside the pocket so it keeps its shape. Do not hang it to dry while it is wet, because the straps will stretch.

A coral crocheted hanging basket holds toilet paper on a cream bathroom wall beside fresh daisies.

Final Notes

Here is how the measurements build on each other:

  • The back panel’s 48 curved-edge sts are 12 in (30.5 cm) long.
  • They match 24 seam sts on each side of the 6 in (15.2 cm) front pocket.
  • The opening then takes a rim of 83 sts: 51 across the front and 32 across the back.
  • The finished basket is 8 in (20.3 cm) wide and 4.75 in (12.1 cm) tall.

If you check your gauge on the back panel and count stitches at each checkpoint, the pieces will fit together without fudging.

Happy crocheting!

Leave a Comment