This little letter J keychain is bright, lacy and quick to make. The letter is mustard yellow and worked in an open lattice of fan shells, with solid single crochet rows between them. A crisp outline frames the whole shape, and three tiny lilac flowers with sage-green leaves make it feel like a spring garden.
The pattern uses US crochet terms. The finished keychain measures about 4 in (10.2 cm) tall and 2.5 in (6.4 cm) wide, not counting the hardware. It is sturdy enough for a bag, backpack or key set, and it also works as a personalized gift tag.
The J is made as one piece, worked in rows. You start with the bottom bar, add a short hook tip on the left, build the stem upward on the right, and then widen it into the top bar. One border round of single crochet and one round of slip stitches give it a clean outline. Then you sew on the flowers and leaves and add the key ring.
Every row has a stitch count, and you get a measurement checkpoint at each stage, so you can catch size problems early.
Finished Size and Construction
- Finished size: 4 in (10.2 cm) tall x 2.5 in (6.4 cm) wide
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: DK / light (3) cotton
- Hook: 3.25 mm (US D-3)
- Number of pieces: 1 letter body, plus 3 flower and 4 leaf appliqués
- Layout: Single letter, no joining
- Piece size before border: 3.7 in (9.4 cm) tall x 2.2 in (5.6 cm) wide
- Stem width before border: 1.2 in (3.0 cm)
- Border depth: about 0.15 in (0.4 cm) on each side
- Flower diameter: about 0.75 in (1.9 cm)
Materials
Use a smooth, mercerized or combed cotton in DK weight. Cotton shows the fan texture clearly and holds its shape on a keychain. Avoid fuzzy or very stretchy yarn, because the openwork will lose its definition.
- Color A, mustard yellow: 8 g, about 20 m (letter body, flower centers)
- Color B, lilac purple: 2 g, about 5 m (flower petals)
- Color C, sage green: 2 g, about 5 m (leaves)
These quantities include a margin for a gauge test and the sewing tails.
Tools:
– 3.25 mm (US D-3) crochet hook
– Tapestry needle
– Scissors
– Stitch markers (2)
– Gold split key ring, 1 in (2.5 cm)
– Short gold chain with a 6 mm jump ring, about 0.5 in (1.3 cm) long
– 2 pairs of flat pliers
– Blocking mat, rust-proof pins and a spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- fsc – foundation single crochet
- sk – skip
- st(s) – stitch(es)
- sp – space
- RS / WS – right side / wrong side
- rnd – round
Special stitches:
- Shell: (dc, ch 1, dc, ch 1, dc) all in the same stitch.
- V-st: (dc, ch 1, dc) in the same stitch.
- fsc (foundation single crochet): Insert your hook into the chain-like base of the last sc made, yo, and pull up a loop (2 loops on hook). Yo and draw through 1 loop; this forms the new base. Yo and draw through both loops. One fsc adds 1 stitch to the edge of the row.
Turning chains: In shell and V-st rows, the beginning ch 3 counts as the first dc. In sc rows, the ch 1 does not count as a stitch.
Gauge and Checkpoints
Gauge: 6 sc = 1 in (2.5 cm). One pattern repeat (1 shell row + 1 sc row) = 0.5 in (1.3 cm).
Rows 1–3 of the pattern act as your gauge test. Measure before you go any further.
Checkpoints:
– After Row 1: 13 sc measure about 2.2 in (5.6 cm) wide.
– After Row 3: The bottom bar is about 0.7 in (1.8 cm) tall.
– After Row 5: The top of the hook tip sits about 1.2 in (3.0 cm) above the bottom edge.
– After Row 14: The piece is about 3.0 in (7.6 cm) tall, and the stem is 1.2 in (3.0 cm) wide.
– After Row 17: The piece is about 3.7 in (9.4 cm) tall and 2.2 in (5.6 cm) wide.
– After the border: The keychain is 4 in (10.2 cm) x 2.5 in (6.4 cm).
If your piece is too big, go down to a 3.0 mm hook. If it is too small, go up to a 3.5 mm hook. Change hooks rather than stitch counts, because the shell pattern needs exactly 7 or 13 stitches.

Bottom Bar
With Color A, ch 14.
Row 1 (RS): Sc in the 2nd ch from the hook and in each ch across. Turn. (13 sc)
Row 2 (WS): Ch 3 (counts as dc), sk next 2 sts, shell in next st, sk next 2 sts, dc in next st, sk next 2 sts, shell in next st, sk next 2 sts, dc in last st. Turn. (9 dc and 4 ch-1 sps)
Row 3 (RS): Ch 1. Sc in the first dc. Work 1 sc in each dc and each ch-1 sp across, ending with sc in the top of the turning ch-3. (13 sc)
Do not turn yet. Your yarn is now at the left end of the bar with the RS facing. Number the Row 3 stitches 1 to 13 from right to left. The stem will go over sts 1–7, st 8 stays empty, and the hook tip will go over sts 9–13.
Checkpoint: 2.2 in (5.6 cm) wide, 0.7 in (1.8 cm) tall.
Hook Tip
Row 4 (WS): Ch 3 and turn. The ch 3 counts as a dc in st 13. Sk st 12, V-st in st 11, sk st 10, dc in st 9. Turn, and leave the remaining 8 sts unworked. (4 dc and 1 ch-1 sp)
Row 5 (RS): Ch 1. Sc in the first dc, sc in the next dc, sc in the ch-1 sp, sc in the next dc, and sc in the top of the turning ch-3. (5 sc)
Fasten off with a 4 in (10.2 cm) tail and weave it in. This short lobe becomes the upturned curl of the J.
Checkpoint: The top of the tip is 1.2 in (3.0 cm) above the bottom edge.
Stem
Row 6 (RS): With the RS facing, join Color A with a sl st in st 1 of Row 3 (the right edge). Ch 3 (counts as dc), sk sts 2–3, shell in st 4, sk sts 5–6, dc in st 7. Turn. St 8 stays unworked, and it forms the inner valley of the J. (5 dc and 2 ch-1 sps)
Row 7 (WS): Ch 1. Sc in the first dc, then 1 sc in each dc and each ch-1 sp across, ending with sc in the top of the turning ch. Turn. (7 sc)
Row 8: Ch 3, sk 2, shell in next st, sk 2, dc in last st. Turn. (5 dc and 2 ch-1 sps)
Rows 9–13: Repeat Rows 7 and 8 twice more, then Row 7 once more. Row 13 is a sc row of 7 sts.
Row 14 (RS): Repeat Row 8. (5 dc and 2 ch-1 sps)
The stem now has 5 shell rows (Rows 6, 8, 10, 12 and 14) with sc rows between them.
Checkpoint: The piece is 3.0 in (7.6 cm) tall overall, and the stem is 1.2 in (3.0 cm) wide.
Top Bar
Row 15 (WS), conversion row: Ch 4 and turn. Sc in the 2nd ch from the hook and in the next 2 ch. These 3 sc form the left extension when you look at the RS.
Next, work across the stem: sc in the first dc, then 1 sc in each dc and each ch-1 sp, ending with sc in the top of the turning ch. That is 7 sc.
Finish with 3 fsc to make the right extension.
Count: 7 sc worked 1 per existing stitch + 3 sc on the chain + 3 fsc = 13 sts. Turn.
Row 16 (RS): Ch 3 (counts as dc), sk 2, shell in next st, sk 2, dc in next st, sk 2, shell in next st, sk 2, dc in last st. Turn. (9 dc and 4 ch-1 sps)
Row 17 (WS): Ch 1. Sc in each dc and each ch-1 sp across, ending with sc in the top of the turning ch. (13 sc)
Do not fasten off.
Checkpoint: The piece is 3.7 in (9.4 cm) tall and 2.2 in (5.6 cm) wide. The top bar should line up exactly with the bottom bar.
Border
Border gauge: A shell row is about twice as tall as a sc row, so you work 2 sc into the end of each shell row and 1 sc into the end of each sc row. Along stitch tops and foundation loops, work 1 sc per stitch. Each outer corner stitch gets 3 sc, which is 2 extra. Inner corners get no extra stitches.
Rnd 1: Ch 1 and turn so the RS faces you. You are at the top-right corner. Work all the way around as follows:
- Top edge: 3 sc in the first st, sc in the next 11 sts, 3 sc in the last st. 13 + 4 = 17 sc.
- Left end of the top bar: 2 sc in the end of Row 16. (2)
- Under the left extension: 3 sc in the outermost foundation ch (corner), then sc in each of the next 2 foundation ch. 3 + 2 = 5 sc.
- Left edge of the stem, going down: 2 sc in the end of each shell row (Rows 14, 12, 10, 8 and 6) and 1 sc in the end of each sc row (Rows 13, 11, 9 and 7). 10 + 4 = 14 sc.
- Inner valley: Sc in the unworked st 8 of Row 3, then 2 sc in the end of Row 4. (3)
- Top of the hook tip: 3 sc in the first st of Row 5, sc in the next 3 sts, 3 sc in the last st. 5 + 4 = 9 sc.
- Outer left edge, going down: 2 sc in the end of Row 4, 1 sc in the end of Row 3, and 2 sc in the end of Row 2. (5)
- Bottom-left corner: 3 sc in the foundation ch at the base of the last sc of Row 1. (3)
- Bottom edge: Sc in the next 11 foundation ch, then 3 sc in the last ch (bottom-right corner). 11 + 3 = 14 sc.
- Right edge, going up: 2 sc in the end of Row 2 and 1 sc in the end of Row 3. Then work up the stem: 2 sc in the end of each shell row (Rows 6, 8, 10, 12 and 14) and 1 sc in the end of each sc row (Rows 7, 9, 11 and 13). 3 + 14 = 17 sc.
- Under the right extension: Sc in the bases of the 2 inner fsc, then 3 sc in the base of the outer fsc (corner). 2 + 3 = 5 sc.
- Right end of the top bar: 2 sc in the end of Row 16. (2)
Sl st to the first sc to join. Total: 17 + 2 + 5 + 14 + 3 + 9 + 5 + 3 + 14 + 17 + 5 + 2 = 96 sc.
Rnd 2: Sl st loosely in each sc around, then join to the first sl st. (96 sl sts) Fasten off with an 8 in (20.3 cm) tail and weave it in.
Why the math works: The rows are spaced at 6 per inch, and the border also places 6 sc per inch along the row ends, which matches the 6 sc per inch along the stitch tops. Because the border density is the same as the body’s, the edges stay flat. The 2 extra sc at each outer corner let the border turn without pulling. The inner corners need no extra stitches, so they stay crisp instead of rippling.
Checkpoint: 4 in (10.2 cm) x 2.5 in (6.4 cm), and the stem is 1.5 in (3.8 cm) wide.
Flowers (Make 3)
Rnd 1: With Color A, make a magic ring. Ch 1, then work 5 sc into the ring. Pull the ring closed. Join with a sl st to the first sc, changing to Color B as you complete the join. Fasten off Color A. (5 sc)
Rnd 2: With Color B, work (sl st, ch 2, 2 dc, ch 2, sl st) in each sc around. (5 petals)
Fasten off with a 6 in (15.2 cm) tail for sewing. Each flower measures about 0.75 in (1.9 cm) across.
Leaves (Make 4)
With Color C, ch 6.
Rnd 1: Sc in the 2nd ch from the hook, hdc in the next ch, dc in the next ch, hdc in the next ch, and (sc, ch 2, sc) in the last ch for the tip. Now work along the other side of the chain: hdc, dc, hdc and sc. Sl st to the first sc. (10 sts and 1 ch-2 tip)
Fasten off with a 6 in (15.2 cm) tail. Each leaf is about 0.75 in (1.9 cm) long.
Assembly
- Top flower: Tuck 2 leaves behind the right end of the top bar so they fan outward to the right. Sew one flower on top so it overlaps the bar’s corner.
- Middle flower: Sew a flower to the right edge of the stem, about halfway up. Tuck 1 leaf below it so the leaf points down and to the right.
- Bottom flower: Sew a flower to the lower-left curve. Tuck 1 leaf behind it so the leaf points down and to the left.
- Sew through the petals and the flower center only, so the lattice openings stay clear.
- Use pliers to open the jump ring. Pass it through the center sc of the top edge (the 9th of the 17 top-edge sts) and attach the chain and split ring. Close the jump ring tightly.
Final Blocking
- Lightly spray the letter (before adding the hardware, if possible) until it is damp, not soaked.
- Pin it to 4 in (10.2 cm) x 2.5 in (6.4 cm).
- Pin each fan shell open so the lattice holes are clear.
- Round the bottom-left curve and the hook tip with your fingers, and pin them in a smooth arc.
- Keep the top bar and bottom bar parallel and straight.
- Let it dry completely, then unpin.
- Steam or spray the flowers separately and press the petals flat.
Final Quality-Control Checklist
- The bottom and top bars have 13 sts each, and the stem has 7.
- There are 5 shell rows in the stem and 1 shell row in each bar.
- St 8 of Row 3 was left open, so the inner valley is clean.
- The border has 96 sc and Round 2 has 96 sl sts.
- The finished piece is 4 in (10.2 cm) x 2.5 in (6.4 cm).
- The flowers and leaves are secure, and their tails are hidden.
- The jump ring is fully closed and centered.
Troubleshooting
- The stem leans or twists: Check that every shell row starts with ch 3 and ends in the top of the turning chain. Block it straight.
- The border ruffles: You have added extra sc at the row ends. Use 2 per shell row and 1 per sc row.
- The border pulls or cups: Work Round 2 more loosely, or use a 3.5 mm hook for the slip stitches only.
- The shells look crowded: Your tension is tight. Go up a hook size.
- The hook tip looks square: Pin it into a curve during blocking.
- The extensions in Row 15 are uneven: Recount the 3 sc on the chain and the 3 fsc.
Care
Hand wash in cool water and lay flat to dry. Remove the metal hardware before washing so it doesn’t tarnish.

Final Notes
Here is the measurement chain from start to finish. Your gauge is 6 sc = 1 in (2.5 cm). The bottom bar is 13 sts, or 2.2 in (5.6 cm) wide. The stem is 7 sts, or 1.2 in (3.0 cm) wide. The body measures 3.7 in (9.4 cm) tall before the border. The 96-stitch border adds 0.15 in (0.4 cm) on each side, which brings the finished keychain to 4 in (10.2 cm) x 2.5 in (6.4 cm). If each checkpoint matches, the letter will come out the right size.
Happy crocheting!