Sweetheart Cascade Heart Curtain Crochet Pattern

Sweetheart Cascade is a light, airy curtain made of open crochet hearts on long vertical strands. Each heart is a single band of double crochet with plump lobes, a crisp bottom point and a tidy top dip. Short chains link the hearts, so light shows through every gap.

This version uses two warm shades, soft peach and coral, set in alternating strands for a striped look on the rod. Hang it in a window, across a doorway or behind a reading nook. It also works for Valentine’s Day, but the colors are gentle enough to leave up all year.

The pattern uses US crochet terms. The finished curtain has 8 strands of 8 hearts each. It measures about 31.25 in (79.4 cm) wide on the rod and 32.6 in (82.8 cm) long from the top of the hanging loop to the last heart’s point.

You make each strand in one piece, in two passes. On the way down you chain the skeleton and work the first half of every heart. On the way back up you work the second half of every heart and slip stitch up the connecting chains. That leaves no loose ends between hearts and gives each connector a firm, doubled finish.

Finished Size and Construction

  • Finished size: 31.25 in (79.4 cm) wide × 32.6 in (82.8 cm) long
  • Skill level: Easy+ (confident beginner)
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4)
  • Hook: 5 mm (H-8)
  • Number of pieces: 8 strands
  • Layout: 8 strands across, 8 hearts per strand, colors alternating
  • Single heart: 3.25 in (8.3 cm) wide × 3 in (7.6 cm) tall
  • Strand size before hanging loop: 31 in (78.7 cm) long
  • Hanging loop depth (“border”): 1.6 in (4.1 cm)

Materials

Yarn: Smooth worsted-weight cotton or a cotton blend, about 200 m per 100 g. Cotton keeps the hearts crisp and stops the strands from stretching over time.

  • Color A, Peach: 100 g (about 200 m / 219 yd), for strands 1, 3, 5 and 7
  • Color B, Coral: 100 g (about 200 m / 219 yd), for strands 2, 4, 6 and 8

Each strand uses about 41 m (45 yd), or about 21 g, so each color needs about 164 m (82 g). The amounts above include a margin for your test heart and tails.

Tools:
– 5 mm (H-8) crochet hook
– Tapestry needle
– Scissors
– Stitch markers (2)
– Tape measure
– Curtain rod up to 1 in (2.5 cm) in diameter
– Blocking mat and rust-proof pins

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • dc – double crochet
  • st(s) – stitch(es)
  • sp – space
  • back bump – the small ridge on the back of a chain

Special stitch – Back-bump slip stitch: Turn the chain so the back faces you. Insert the hook under the back bump only, yarn over and pull through the bump and the loop on the hook. Worked along a chain, this hides the chain’s back and leaves a neat braid on the front.

Ring chain numbering: For each heart, ring ch 1 is the chain you slip stitch into to close the ring. That chain becomes the top dip. Count ch 2 through ch 30 in the direction you’re working. Ring ch 16 sits opposite the dip and becomes the bottom point.

Gauge and Checkpoints

Stitch gauge: 13 dc and 7 rows = 4 in (10.2 cm). One dc stands about 0.6 in (1.5 cm) tall.

Chain gauge: 5 ch = 1 in (2.5 cm).

Make a test heart first. It’s a stand-alone version of the bottom heart of a strand:

  1. Ch 6 (stem), then ch 30 and sl st in the first of those 30 to make the ring.
  2. Work Side A, then the point ch, then go straight on to Side B (as written for Heart 8 below).
  3. Sl st in the dip, then work a back-bump sl st in each of the 6 stem ch. Fasten off.

Checkpoints:
– Ring chain, before you join it: 30 ch measures 6 in (15.2 cm) laid straight.
– After Side A: the half heart measures about 2.5 in (6.4 cm) from dip to point.
– Finished test heart: 3.25 in (8.3 cm) wide × 3 in (7.6 cm) tall, lying flat with no cupping.
– Connector: 6 ch plus the point ch measures 1.4 in (3.6 cm).

If your heart is too big (more than 0.25 in / 0.6 cm over), go down to a 4.5 mm hook. If it’s too small, go up to a 5.5 mm hook. If the band ruffles, your chain is too tight compared with your dc, so loosen the chains a little rather than changing hooks.

Peach-colored crocheted heart ornament with twisted rope hanger, displaying detailed stitch texture on marble background.

Strand Pattern

Each strand has 8 hearts. Heart 1 is at the top and Heart 8 at the bottom. Make every strand the same way and change only the color.

Pass 1: Working Down the Strand

Start: Leave an 8 in (20.3 cm) tail. Make a slip knot and ch 6 for the top stem.

Hearts 1 to 7 (repeat 7 times):

Ring: Ch 30, then sl st in the first of those 30 ch to close the ring. This ch is ring ch 1, the dip.

Side A: Ch 2 (doesn’t count as a st). Dc in ring ch 2, then 2 dc in each of ring ch 3–8 (12 dc). Dc in each of ring ch 9–15 (7 dc), then dc in ring ch 16 (the point dc). Ch 1 for the point ch. (21 dc)

The 6 increases in ch 3–8 shape the rounded lobe. The single dc in ch 9–15 make the straight edge that runs down to the point.

Connector: Ch 6.

Repeat the Ring, Side A and Connector steps for each heart down to Heart 7.

Heart 8 (bottom heart):

Ring: Ch 30, then sl st in the first ch to close.

Side A: Work it exactly as above, ending with dc in ring ch 16, ch 1 for the point ch. (21 dc)

Don’t make a connector. Go straight on to Pass 2.

Pass 2: Working Up the Strand

Side B of Heart 8: Dc in ring ch 16, the same ch as the point dc, so the point ch sits between the two point dc. Dc in each of ring ch 17–23 (7 dc), then 2 dc in each of ring ch 24–29 (12 dc). Dc in ring ch 30, then sl st in ring ch 1 (the dip). (21 dc; Heart 8 total: 42 dc)

Side B mirrors Side A. Both sides have 1 point dc, 7 single dc on the straight edge, 12 dc in the lobe and 1 dc next to the dip.

Climb to the next heart: Work a back-bump sl st in each of the 6 connector ch (6 sl st), then sl st in the point ch of the heart above.

Side B of Hearts 7 to 1 (repeat 7 times): Dc in ring ch 16, dc in each of ring ch 17–23, 2 dc in each of ring ch 24–29, dc in ring ch 30, sl st in ring ch 1. (21 dc; heart total: 42 dc)

After Hearts 7 to 2, climb the connector above as described. After Heart 1, work a back-bump sl st in each of the 6 stem ch (6 sl st). You’re now at the top of the strand, ready for the hanging loop.

Stitch count per strand: 8 hearts × 42 dc = 336 dc. That’s 7 connectors × 6 sl st plus 6 stem sl st, or 48 back-bump sl st in total.

Make All Pieces

  • Color A, Peach: 4 strands
  • Color B, Coral: 4 strands

Layout, seen from the front with the rod at the top:

Strand:  1    2    3    4    5    6    7    8
Color:   A    B    A    B    A    B    A    B
Hearts:  8    8    8    8    8    8    8    8

Before adding the loops, check each strand. Laid flat without stretching, it should measure 31 in (78.7 cm) from the top of the stem to Heart 8’s point. That breaks down as stem 1.2 in (3.0 cm), 8 hearts at 2.5 in (6.4 cm) dip-to-point each, and 7 connectors at 1.4 in (3.6 cm) each:
1.2 + 20 + 9.8 = 31 in.

Joining: Linking and Hanging the Strands

The strands aren’t sewn together. The joining happens inside each strand, with the connector chains, and across the curtain, with the rod.

Stitch-to-stitch logic inside a strand: Each connector has 6 ch from Pass 1 and gets exactly 6 back-bump sl st in Pass 2, one per chain. Don’t skip chains or add extra sl st. Either one changes the 1.4 in (3.6 cm) connector length and makes the strands uneven.

Tension: Work the climbing sl st at the same tension as your chains. Pulled tight, they shorten the connector and pucker the dip. Worked loosely, they let the hearts sag and twist.

Hanging: Slide all 8 hanging loops onto the rod in color order. Space the strands 4 in (10.2 cm) apart, center to center. That leaves about 0.75 in (1.9 cm) between the widest points of neighboring hearts.

Size checkpoint: Measured across the rod from the outer edge of Strand 1 to the outer edge of Strand 8, the curtain should be 7 × 4 in + 3.25 in = 31.25 in (79.4 cm).

Border: Hanging Loop Finish

A curtain doesn’t get a fabric border. Here, the finishing edge is the hanging loop at the top of each strand.

Border gauge: The same chain gauge as the strand, 5 ch = 1 in (2.5 cm).

Round 1: Ch 16, then sl st in the first sl st at the top of the stem to close the loop. (16 ch; 8 ch per side of the loop)

Round 2 (reinforcement): Work a back-bump sl st in each of the 16 loop ch, then sl st in the top of the stem. (16 sl st; 8 per side) Fasten off, leaving a 6 in (15.2 cm) tail.

Why the math works: 16 ch at 5 ch per inch gives a loop 3.2 in (8.1 cm) around. A 1 in (2.5 cm) rod is about 3.14 in around, so the loop fits with a little ease. The loop hangs 1.6 in (4.1 cm) deep. Round 2 adds exactly 1 sl st per ch, so it makes the loop stronger without changing its size.

Full strand length: 31 in + 1.6 in = 32.6 in (82.8 cm).

Final Blocking

  1. Weave in both tails of each strand along the back of the stem chain and the top dc band.
  2. Lay each strand flat on the blocking mat and straighten the connectors.
  3. Pin each heart to 3.25 in (8.3 cm) wide × 3 in (7.6 cm) tall. Put a pin at the point, one in the dip and one at the top of each lobe.
  4. Pin the connectors so each one is 1.4 in (3.6 cm) long, without stretching.
  5. Spray lightly with water until damp, not soaked.
  6. Leave to dry completely, at least 6 hours, before you unpin.
  7. Check the strand length again: 32.6 in (82.8 cm) including the loop.

Final Quality-Control Checklist

  • Every heart has 42 dc: 21 on Side A and 21 on Side B.
  • Every point has two dc with the point ch between them.
  • Every dip is closed with a sl st in ring ch 1, with no gap.
  • Each connector has 6 ch and 6 back-bump sl st.
  • All 8 strands are within 0.5 in (1.3 cm) of each other in length.
  • Each hanging loop has 16 ch and 16 sl st.
  • The colors alternate A, B, A, B, A, B, A, B from left to right.
  • All tails are woven in and trimmed.

Troubleshooting

The lobes ruffle: The ring chain is too tight. Chain more loosely, or make the ring chain one hook size larger.

The heart cups and won’t lie flat: The dc are too short or too tight. Pull each loop up to its full height before finishing the stitch.

The point is rounded instead of sharp: Check that the point ch is there and sits between the two dc in ring ch 16.

The hearts twist when hanging: Make sure every climbing sl st goes into the back bump. Working into the top loops twists the chain.

One strand is longer than the others: Count its connectors. A connector with an extra chain adds about 0.2 in (0.5 cm).

You run out of yarn mid-strand: Join new yarn at the start of a side, never in a connector, and weave the tails into the dc band.

Care

Hand wash in cool water with mild soap, gently press out the water and dry flat. Re-pin the hearts if needed. Dust between washes with a cool hairdryer setting or a soft brush.

Crocheted heart garland in alternating peach and red hanging from wooden rod in bright sunlit window.

Final Notes

Everything starts from your gauge. Five chains per inch gives a 6 in (15.2 cm) ring, and that ring makes a 3.25 in (8.3 cm) × 3 in (7.6 cm) heart. Eight hearts, seven 1.4 in (3.6 cm) connectors and a 1.2 in (3.0 cm) stem make a 31 in (78.7 cm) strand. The 1.6 in (4.1 cm) loop brings each strand to 32.6 in (82.8 cm). Eight strands spaced 4 in (10.2 cm) apart fill 31.25 in (79.4 cm) of rod.

Check your test heart before you start, count every connector, and the curtain will hang straight and even.

Happy crocheting!

Leave a Comment