Starry Bloom Plastic Bag Holder Crochet Pattern

The Starry Bloom Plastic Bag Holder is a tall, soft tube that hangs from a kitchen rail and keeps loose grocery bags in one place. You push bags in through the open top and pull them out one at a time through an oval slot near the base. Star stitch covers the whole surface. It looks like rows of small flowers, and it holds its shape well.

The sample is worked in one warm peach color, and a sage green version looks just as nice. Pick a shade that suits your kitchen. The style is cozy farmhouse: plain cotton, a strong texture, and clean single crochet edges.

This pattern uses US crochet terms. The finished holder is about 14 in (35.6 cm) tall and 16.5 in (41.9 cm) around, or 8.25 in (21.0 cm) wide when laid flat. The handle rises about 4 in (10.2 cm) above the rim.

The holder is made in one piece with no seams. You crochet a flat oval base in single crochet, then work the body upward in joined rounds of star stitch. Two short rows form the slot for pulling out bags. A single crochet rim, a strap handle, and an edging around the slot finish the piece.

Finished Size and Construction

  • Finished size: 14 in (35.6 cm) tall; 16.5 in (41.9 cm) around; 8.25 in (21.0 cm) wide flat
  • Skill level: Intermediate (star stitch and working in rounds)
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 1 (base, body, rim, and handle are all worked in one piece)
  • Layout: A single standing tube with an oval base, a slot on the front, and a handle across the top
  • Base size: 7 in × 2.5 in (17.8 cm × 6.4 cm)
  • Height before rim: 13.25 in (33.7 cm)
  • Rim depth: 0.75 in (1.9 cm)
  • Slot opening: 3.25 in (8.3 cm) wide × 1 in (2.5 cm) tall
  • Handle: 1.5 in (3.8 cm) wide × 9 in (22.9 cm) long

Materials

Choose a smooth worsted weight cotton or cotton blend. Cotton keeps the stars crisp and stretches very little under the weight of the bags. Acrylic also works, but the holder will be softer and may sag more.

  • Peach (main color): 280 g, about 476 m (520 yd)
  • Optional second colorway: sage green, same amount

Tools:

  • 5.0 mm (H-8) crochet hook
  • 4 locking stitch markers
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Rust-proof pins and a towel for blocking

The yarn amounts include a margin of about 10% for your gauge check and for differences in tension.

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • blo: back loop only
  • st(s): stitch(es)
  • rnd(s): round(s)
  • RS / WS: right side / wrong side

Special stitches

  • Beginning star (beg-star): Ch 3. Pull up a loop in the 2nd ch from hook and another in the 3rd ch from hook. Pull up a loop in each of the next 3 sts (6 loops on hook). Yarn over and draw through all 6 loops. Ch 1 to close the star. This ch-1 is the star’s “eye.”
  • Star: Pull up a loop in the eye of the previous star. Pull up a loop in the back of the last leg of the previous star. Pull up a loop in the same st as that last leg. Pull up a loop in each of the next 2 sts (6 loops on hook). Yarn over and draw through all 6 loops. Ch 1 to close (eye).

Each star shares one stitch with the star before it, so every star after the first uses 2 new stitches.

Gauge and Checkpoints

  • Single crochet: 16 sc and 18 rnds = 4 in (10.2 cm)
  • Star stitch: 8 stars (16 sts) and 8 rnds (4 star rnds plus 4 hdc rnds) = 4 in (10.2 cm)

Make the base first and use it as your gauge test. It shows you almost everything about your gauge before you start the body.

Checkpoints:

  1. After Rnd 5 (base): 7 in × 2.5 in (17.8 cm × 6.4 cm), lying flat with no ruffles.
  2. After Rnd 12: 3.25 in (8.3 cm) tall above the base edge.
  3. After Rnd 22: 8.25 in (21.0 cm) tall.
  4. After Rnd 32: 13.25 in (33.7 cm) tall.
  5. After the rim: 14 in (35.6 cm) tall.

If your base is more than 0.25 in (0.6 cm) too long, change to a 4.5 mm hook. If it is too short, change to a 5.5 mm hook. If the base cups, loosen your tension on the curved ends. If it ruffles, recount your increases.

You can adjust the height by adding or removing a pair of pattern rounds. One star rnd plus one hdc rnd equals 1 in (2.5 cm).

Close-up of coral-toned crochet puff stitch showing raised dimensional loops against a soft, neutral background.

Base

The base is an oval worked around a foundation chain. Each round has two straight sides of 18 sts and two curved ends. Each end grows by 3 sts per round.

Ch 21.

Rnd 1: 3 sc in 2nd ch from hook, sc in next 18 ch, 3 sc in last ch. Rotate and work along the other side of the chain: sc in next 18 ch. Join with sl st to first sc. (42 sts: 3 end + 18 side + 3 end + 18 side)

Rnd 2: Ch 1. 2 sc in each of next 3 sts, sc in next 18 sts, 2 sc in each of next 3 sts, sc in next 18 sts. Join. (48 sts: 6 + 18 + 6 + 18)

Rnd 3: Ch 1. [Sc in next st, 2 sc in next st] 3 times, sc in next 18 sts, [sc in next st, 2 sc in next st] 3 times, sc in next 18 sts. Join. (54 sts: 9 + 18 + 9 + 18)

Rnd 4: Ch 1. [Sc in next 2 sts, 2 sc in next st] 3 times, sc in next 18 sts, [sc in next 2 sts, 2 sc in next st] 3 times, sc in next 18 sts. Join. (60 sts: 12 + 18 + 12 + 18)

Rnd 5: Ch 1. [Sc in next 3 sts, 2 sc in next st] 3 times, sc in next 18 sts, [sc in next 3 sts, 2 sc in next st] 3 times, sc in next 18 sts. Join. (66 sts: 15 + 18 + 15 + 18)

Check the base now: 7 in × 2.5 in (17.8 cm × 6.4 cm). In Rnd 5, sts 49–66 form the second straight side. The slot will be centered on that side.

Body

Work the body in joined rounds without turning. Odd rounds are star rounds, and even rounds are hdc rounds.

Rnd 6 (turning ridge): Ch 1, sc blo in each st around. Join. (66 sc)

This round turns the base edge upward and makes a neat ridge along the bottom.

Rnd 7 (star rnd): Beg-star over the first 3 sts. Work 1 star over each following pair of sts around. The last star uses the final 2 sts of the round plus the base of the beg-star. Join with sl st to top of beg ch-3. (33 stars)

Rnd 8 (hdc rnd): Ch 2 (does not count as a st). 2 hdc in the eye of each star around. Join to first hdc. (66 hdc)

Place a marker in the 52nd hdc and another in the 64th hdc. The 13 sts between and including the markers (52–64) stay unworked to form the slot. Fasten off.

Slot Rows

Make the slot by working 2 rows back and forth, then closing the round with a chain.

Row 9 (RS): Join yarn with sl st in the 65th hdc. Beg-star over hdc 65, 66, and 1. Work stars around, each over the next 2 sts, until the last star ends in hdc 51. Leave hdc 52–64 unworked. (26 stars over 53 sts)

Row 10 (WS): Ch 2, turn. Hdc in the last leg of the final star (above hdc 51), then 2 hdc in each eye across. (53 hdc: 1 + 26 × 2)

At the end of Row 10, ch 13. Bring the chain across the gap and join it with sl st to the first hdc of Row 10. Turn so the RS faces you.

Rnd 11 (star rnd): Work a beg-star, starting in the joining st and continuing into the chains. Work stars around as usual, treating each ch as a st. Join. (33 stars over 66 sts: 53 hdc + 13 ch)

Rnd 12 (hdc rnd): Ch 2, 2 hdc in each eye around. Join. (66 hdc)

The round now begins at the left edge of the slot. That’s fine; keep working rounds from here.

Checkpoint: 3.25 in (8.3 cm) tall above the base edge.

Upper Body

Rnds 13–32: Repeat Rnds 7 and 8 (star rnd, then hdc rnd) 10 more times. (33 stars on each odd rnd; 66 hdc on each even rnd)

At Rnd 22, the body should measure 8.25 in (21.0 cm). At Rnd 32, it should measure 13.25 in (33.7 cm). Do not fasten off.

Rim, Slot Edging, and Handle

These finishing rounds act as the border. They use the single crochet gauge: 16 sc = 4 in (10.2 cm).

Rim

Rnd 33: Ch 1, sc in each hdc around. Join. (66 sc)

Rnds 34–35: Ch 1, sc in each st around. Join. (66 sc each rnd)

Fasten off. The rim adds 0.75 in (1.9 cm), so the holder now measures 14 in (35.6 cm).

Why the math works: The rim has the same 66 sts as the body and the base. When you flatten the holder, each face has 33 sts. At 16 sc per 4 in, 33 sts = 8.25 in (21.0 cm). Since no stitches are added or removed, the top edge stays straight and doesn’t flare or pull in.

Slot Edging

Join yarn in the first unworked hdc at the bottom of the slot (hdc 52 of Rnd 8).

Rnd 1: Ch 1. Sc in each of the 13 unworked hdc along the bottom edge. Work 3 sc evenly along the row ends at one side. Sc in the underside of each of the 13 chains along the top edge. Work 3 sc evenly along the other side. Join. (32 sc: 13 + 3 + 13 + 3)

Fasten off. The slot measures about 3.25 in × 1 in (8.3 cm × 2.5 cm).

Handle

Flatten the holder with the slot centered on the front face. The two folds are the curved ends. On each fold, mark the 6 center sts of Rnd 35.

Row 1: Join yarn in the first marked st on one end. Sc in each of the 6 marked sts. (6 sc)

Rows 2–40: Ch 1, turn, sc in each st across. (6 sc each row)

Check the strap: 1.5 in (3.8 cm) wide and about 9 in (22.9 cm) long.

Make sure the handle isn’t twisted. Hold the last row against the 6 marked sts on the other end, RS out. Sl st through both layers in each of the 6 pairs of sts. Fasten off.

Handle edging: Join yarn at one base of the handle and sl st in the end of each row along the long edge. (40 sl st) Repeat on the other long edge. (40 sl st)

The edging firms up the strap and keeps it from stretching under the weight of the bags.

Final Blocking

  1. Weave in all ends on the WS. Run each tail through at least 2 in (5.1 cm) of stitches.
  2. Soak the holder in cool water for 15 minutes.
  3. Gently squeeze out the water. Roll the holder in a towel and press out the rest.
  4. Put a folded towel or a tall box inside the tube so it measures about 8.25 in (21.0 cm) wide flat.
  5. Shape the base into a neat oval, 7 in × 2.5 in (17.8 cm × 6.4 cm).
  6. Pin the slot open in a smooth oval, 3.25 in × 1 in (8.3 cm × 2.5 cm).
  7. Lay the handle flat and pin it straight at 1.5 in (3.8 cm) wide.
  8. Let everything dry completely before you hang it.

Final Quality-Control Checklist

  • The base lies flat at 7 in × 2.5 in (17.8 cm × 6.4 cm)
  • Every star round has 33 stars and every hdc round has 66 hdc
  • The slot is centered on one straight side, 1.25 in (3.2 cm) above the base edge
  • The slot edging has 32 sc and the opening lies smooth
  • Height before the rim is 13.25 in (33.7 cm)
  • The rim has 66 sc in each of its 3 rounds
  • Total height is 14 in (35.6 cm)
  • The handle has 40 rows, isn’t twisted, and is centered on both ends
  • All ends are woven in and hidden

Troubleshooting

The base cups upward. Your tension is too tight on the curves. Loosen up, or add 1 extra increase to each end in Rnd 5 and keep the extra sts in the body.

The base ruffles. Recount each increase round. Each end must grow by exactly 3 sts.

The stars look squashed. Pull each loop up to the same height as the beg ch-3 before you close the star.

The body flares at the top. You may have worked 3 hdc into some eyes. Recount: every even round should have 66 hdc.

The slot gapes or droops. Work the 13 chains firmly, then check that the slot edging has exactly 13 sc along the top edge.

The handle stretches. Use cotton, add the sl st edging, and don’t hang heavy items from the holder.

The holder is too short. Add another star rnd and hdc rnd before the rim. Each pair adds 1 in (2.5 cm).

Care

Hand wash, or machine wash on a gentle cool cycle inside a mesh bag. Reshape while damp, then lay flat or hang to dry.

Peach crocheted tissue bag dispenser hanging from a brass rod on a brick kitchen wall.

Final Notes

The measurements build on each other in a simple chain. The base sets the size: 66 sts, 7 in × 2.5 in (17.8 cm × 6.4 cm), and 16.5 in (41.9 cm) around. The body keeps those same 66 sts in every round, so the tube rises straight to 13.25 in (33.7 cm). Two short rows form a 13-st slot, 3.25 in (8.3 cm) wide. The 3-round rim brings the holder to 14 in (35.6 cm), and a 6-st strap of 40 rows becomes a 9 in (22.9 cm) handle.

If your base matches the gauge, everything else falls into place. Hang it, fill it, and enjoy a tidier kitchen.

Happy crocheting!

Leave a Comment