Peacock Plume Lace Curtain Crochet Pattern

The Peacock Plume Lace Curtain is a floor-length crochet panel: an airy cream chain-loop net with staggered rows of small peacock feathers. Each feather has a navy eye, a gold ring and a fan of long teal spokes. A cream scalloped outline frames each feather and blends it into the net. A solid cream header band at the top takes clip rings.

The colors are cream, sea teal, mustard gold and deep navy, in a vintage boho style that still lets plenty of daylight through. This pattern uses US crochet terms.

One panel measures 37.5 in (95.3 cm) wide by 85 in (215.9 cm) long, including the border and header. The photo shows a pair, so make two panels.

First you crochet one cream net panel in rows. The feathers are made separately and tacked onto the net in a staggered layout. A sc border goes all the way around, and a solid header is worked across the top.

Finished Size and Construction

  • Finished panel size: 37.5 in x 85 in (95.3 cm x 215.9 cm)
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: #4 worsted cotton
  • Hook: US H-8 (5.0 mm)
  • Number of pieces: 1 net + 68 feather appliqués per panel; 2 panels for the pair (2 nets, 136 feathers)
  • Layout: 15 staggered feather rows, with 8 rows of 5 alternating with 7 rows of 4
  • Piece size: each feather is 4.5 in x 6 in (11.4 cm x 15.2 cm)
  • Size before border: net is 36 in x 80.5 in (91.4 cm x 204.5 cm)
  • Border depth: 0.75 in (1.9 cm) on all sides, plus a 3 in (7.6 cm) header at the top

Materials

Use a smooth mercerized or combed worsted cotton with about 200 m per 100 g. Cotton keeps the net crisp and helps the curtain hang straight. Avoid fuzzy yarns, because they blur the open loops.

Yarn for the pair:

  • Cream (A): 2,000 g / 4,000 m (nets, outlines, borders, headers)
  • Teal (B): 750 g / 1,500 m (fans)
  • Gold (C): 300 g / 600 m (rings)
  • Navy (D): 225 g / 450 m (eyes)

For one panel, use half of each amount. All quantities include a margin of about 10%.

Tools: US H-8 (5.0 mm) hook, tapestry needle, about 100 rust-proof pins, measuring tape, stitch markers, blocking mats or a clean sheet, 18 clip curtain rings (9 per panel) and a curtain rod.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • RS / WS – right side / wrong side

Special stitch – Net loop: ch 5, then sc in the next ch-5 loop (or in the indicated st).

Gauge and Checkpoints

Net gauge: 4 net loops = 4 in (10.2 cm) wide and 6 rows = 4 in (10.2 cm) tall, measured after light blocking.

Swatch: Ch 34. Work Rows 1–3 of the net, then repeat Rows 2–3 until you have 9 rows. Block lightly. The swatch should measure 8 in (20.3 cm) wide and 6 in (15.2 cm) tall.

Make one test feather first and check it at each stage:

  • Navy eye after Rnd 1: 1.25 in (3.2 cm) tall x 1 in (2.5 cm) wide
  • Gold ring after Rnd 2: 2.25 in (5.7 cm) tall x 1.75 in (4.4 cm) wide
  • Teal fan after Row 2: about 4 in (10.2 cm) across
  • Finished feather: 4.5 in x 6 in (11.4 cm x 15.2 cm)

If your pieces come out too big, switch to a 4.5 mm hook. If they’re too small, switch to a 5.5 mm hook. Net width matters most, so match 4 loops = 4 in (10.2 cm) before you start the full panel.

Crocheted flower detail in teal, gold, and navy blue with cream and white yarn background.

Curtain Net (Make 1 per Panel)

With Cream (A), ch 146 (a multiple of 4, plus 2).

Row 1 (RS): Sc in 2nd ch from hook, ch 5, sk 3 ch, sc in next ch; repeat from * 35 more times. Turn. (37 sc, 36 ch-5 loops)

Row 2: Ch 5 (counts as dc + ch 2), sc in first ch-5 loop, ch 5, sc in next ch-5 loop; repeat from * 34 more times, ch 2, dc in last sc. Turn. (35 full loops + 2 half loops)

Row 3: Ch 1, sc in first dc, ch 5, sc in next ch-5 loop; repeat from * 34 more times, ch 5, sc in 3rd ch of turning ch. Turn. (37 sc, 36 ch-5 loops)

Rows 4–121: Repeat Rows 2–3, ending with a Row 3 repeat. Fasten off.

Checkpoint: At 6 rows per 4 in, 121 rows gives 80.5 in (204.5 cm). The width should be 36 loops x 1 in (2.5 cm) = 36 in (91.4 cm). Measure the net relaxed, not stretched. If it comes out short, add rows in pairs so you still end on a full-loop row.

Peacock Feather Appliqué (Make 68 per Panel)

Navy Eye

With Navy (D), ch 5.

Rnd 1: Sc in 2nd ch from hook, hdc in next ch, dc in next ch, 7 dc in last ch. Then work along the other side of the chain: dc in next ch, hdc in next ch, sc in next ch. Join with sl st to first sc. Fasten off. (13 sts)

The two sc sit side by side and form the pointed top. The 7 dc form the rounded bottom.

Gold Ring

Rnd 2: Join Gold (C) in first sc of Rnd 1. Ch 1, then (sc, ch 2, sc) in the same st; these two sc are sc A and sc B. Sc in next hdc, hdc in next dc, 2 hdc in each of next 7 dc, hdc in next dc, sc in next hdc, sc in last sc. Join with sl st to sc A. Fasten off. (21 sts + 1 ch-2 tip sp)

Number the 19 sts after sc B as gold sts 1–19, going around the ring. Gold st 10 is the bottom center.

Teal Fan

The fan is worked in rows over the tip only, so all the spokes start at the eye’s point.

Row 1 (RS): Join Teal (B) in sc A. Ch 4 (counts as tr), ch 1, (tr, ch 1) 5 times in ch-2 tip sp, tr in sc B. Turn. (7 tr, 6 ch-1 sps)

Row 2 (WS): Ch 5 (counts as tr + ch 1), tr in next ch-1 sp, ch 1, tr in next tr, ch 1, tr in next ch-1 sp, ch 1; repeat from * 4 more times, tr in 4th ch of turning ch. Turn. (13 tr, 12 ch-1 sps)

Row 3 (RS): Ch 1, sc in first tr, ch 3, sc in next tr; repeat from * 11 more times. Fasten off. (13 sc, 12 ch-3 loops)

The tr with ch-1 gaps make the separated feather spokes. The ch-3 loops make the small teal scallops at the edge.

Cream Outline

Rnd 4: With RS facing, join Cream (A) in the first ch-3 loop of Row 3.

  • (Sc, ch 5, sc) in each of the 12 ch-3 loops. (12 loops)
  • Sc B side: ch 5, sc around end post of Row 2; ch 5, sc around end post of Row 1; ch 5, sc in gold st 2. (3 loops)
  • Bottom: ch 5, sk 3 gold sts, sc in next st. This puts sc in gold st 6, then (sc, ch 7, sc) in gold st 10 for the bottom point, then sc in gold st 14 and in gold st 18. (4 ch-5 loops + 1 ch-7 point)
  • Sc A side: ch 5, sc around end post of Row 1; ch 5, sc around end post of Row 2; ch 5, sl st to first sc. (3 loops)

Fasten off. That gives 22 ch-5 loops + 1 ch-7 point, for 23 loop tips in total. Checkpoint: 4.5 in x 6 in (11.4 cm x 15.2 cm).

Make All Pieces

For each panel, make 1 net and 68 feathers. For the pair, that’s 2 nets and 136 feathers. Each feather uses about 1.5 g Navy, 2 g Gold, 5 g Teal and 3 g Cream.

Block the feathers flat first. Then pin-mark the feather centers on the net, measuring from its top-left corner:

  • Odd rows (5 feathers): 3.6, 10.8, 18, 25.2, 32.4 in from the left (9.1, 27.4, 45.7, 64.0, 82.3 cm)
  • Even rows (4 feathers): 7.2, 14.4, 21.6, 28.8 in from the left (18.3, 36.6, 54.9, 73.2 cm)
  • Row centers: every 5 in (12.7 cm), from 5 in (12.7 cm) to 75 in (190.5 cm) down from the top
Row 1:  O · O · O · O · O
Row 2:  · O · O · O · O ·
Row 3:  O · O · O · O · O
...alternate...
Row 15: O · O · O · O · O

That’s 8 x 5 + 7 x 4 = 68 feathers. The columns are 7.2 in (18.3 cm) apart, which leaves a 2.7 in gap between feathers in the same row. The next row’s feathers nest into those gaps.

Joining

Method: With Cream (A) and a tapestry needle, tack each feather to the net RS out, with the fan pointing up.

Stitch-to-stitch logic: Center the feather on its pin. Tack each of the 23 loop tips to the nearest net loop or net sc with 2 small overcast stitches. Tack the ch-7 point to the sc directly below it. With one anchor per tip, the outline reads as part of the lattice.

Tension: Keep the tacking snug but not tight. Pulling it tight puckers the net and narrows the panel. Work flat on a table.

Size checkpoint: With all 68 feathers tacked on, the net should still measure 36 in x 80.5 in (91.4 cm x 204.5 cm). If it has narrowed, loosen the tacking on those rows.

Border

Border gauge: 4 sc = 1 in (2.5 cm), and 4 sc rounds = 1 in (2.5 cm).

In this border, the counts per side are the sc between corners. Each corner is a separate 3-sc group.

Rnd 1: With RS facing, join Cream (A) in the last sc of Row 121 and work 3 sc in that sc for the first corner.

  • Top edge: 4 sc in each of the 36 ch-5 loops (144 sc). Work 3 sc in the last sc for the corner.
  • Long side: Along the row ends, work 3 sc, 3 sc, 2 sc over each set of 3 rows, which is 8 sc per 2 in (5.1 cm). Repeat this 40 times, then work 2 sc in the final row end (322 sc). Work 3 sc in the first sc of Row 1 for the corner.
  • Bottom edge: 4 sc in each of the 36 ch-3 spaces of the foundation (144 sc). Work 3 sc in the last foundation sc for the corner.
  • Second long side: Repeat the long-side sequence (322 sc). Join.

That’s 144 + 322 + 144 + 322 + 12 corner sc = 944 sts.

Rnd 2: Ch 1, sc in each st around, working 3 sc in the center sc of each corner. Join. (146 sc on the top and bottom, 324 sc on each long side; 952 sts total)

Rnd 3: Repeat Rnd 2. Fasten off. (148 sc on the top and bottom, 326 sc on each long side; 960 sts total)

Header: With RS facing, join Cream (A) in the center sc of one top corner.

  • Row 1: Ch 3 (counts as dc), dc in each of the next 148 sc and in the center sc of the other top corner. Turn. (150 dc)
  • Rows 2–6: Ch 3 (counts as dc), dc in each st across. Turn. (150 dc)

Fasten off.

Why the math works: Each 1 in (2.5 cm) net loop gets 4 sc, which matches the border gauge. That’s why 144 sc lie flat across 36 in (91.4 cm). On the long sides, 6 rows measure 4 in, and 8 sc per 3 rows also comes to 4 sc per inch, so 322 sc ÷ 4 = 80.5 in (204.5 cm). In the header, 150 dc ÷ 4 = 37.5 in (95.3 cm), which matches the bordered width of 36 + 0.75 + 0.75 = 37.5 in. The length works out to 80.5 + 0.75 + 0.75 + 3 = 85 in (215.9 cm).

Final Blocking

  1. Weave in the ends along stitch paths, never across the open loops.
  2. Soak the panel in cool water with a little gentle wash for 15 minutes.
  3. Roll it in towels to press the water out. Don’t wring it.
  4. Lay the panel flat with the RS up.
  5. Pin the edges to 37.5 in x 85 in (95.3 cm x 215.9 cm), with a pin every 4 in (10.2 cm).
  6. Spread each fan so the spokes radiate evenly, and smooth the cream loops.
  7. Let it dry completely before unpinning.

Final Quality-Control Checklist

  • [ ] Net is 36 loops wide and 121 rows long
  • [ ] 68 feathers per panel, in alternating rows of 5 and 4
  • [ ] Each feather is 4.5 in x 6 in (11.4 cm x 15.2 cm), fan up
  • [ ] All 23 tips on every feather are tacked
  • [ ] Border has 148 / 326 sc per side after Rnd 3
  • [ ] Header is 150 dc wide and 6 rows deep
  • [ ] Panel is 37.5 in x 85 in (95.3 cm x 215.9 cm)
  • [ ] The two panels match within 0.5 in (1.3 cm)

Troubleshooting

  • The fan cups: Your tr are too tight. Work Row 2 with a hook one size larger.
  • The eye looks round: Make sure both end sc of Rnd 1 sit side by side at the top.
  • The long sides ruffle: You have too many sc. Keep to 8 sc per 3 rows.
  • The border pulls in: Go up one hook size for the border only.
  • The net slants: Check that each even row starts with ch 5 and ends with ch 2, dc.
  • The panels are different lengths: Add or remove net rows in pairs.

Care

Hand wash cool, or machine wash on a gentle cycle in a mesh bag. Reshape and dry flat, and never hang the panel while it’s wet.

Teal and cream patterned curtains with peacock-fan motifs hang on a brass rod, framing glass doors in a neutral-toned room.

Final Notes

Everything starts from the swatch: 4 loops and 6 rows each measure 4 in (10.2 cm). That gauge gives a 36 in x 80.5 in (91.4 cm x 204.5 cm) net, which carries 68 feathers at 4.5 in x 6 in (11.4 cm x 15.2 cm). The 0.75 in (1.9 cm) border and the 3 in (7.6 cm) header bring each panel to 37.5 in x 85 in (95.3 cm x 215.9 cm). Hang each panel from 9 clip rings spaced about 4.7 in (11.9 cm) apart.

Happy crocheting!

Leave a Comment