Winter Berry Snowflake Strand Curtain Crochet Pattern

This strand curtain brings the season to a window without blocking the light. Cream cords hang from the rod, each carrying a repeating line of burgundy stars, cream snowflakes and small pairs of sage-green leaves. Next-door strands are offset, so stars and snowflakes alternate across the window like a loose checkerboard.

The palette is deep burgundy, warm cream and soft green, which gives a cozy, traditional winter look. All instructions use US crochet terms.

The finished panel has 10 strands. It measures 45 in (114.3 cm) wide and 61 in (154.9 cm) long including the hanging loops. Each motif is 3.75 in (9.5 cm) from point to point.

Here’s how it’s built: you crochet the stars, snowflakes and leaves separately, make a firm slip-stitch cord for each strand, sew the motifs onto the cords at fixed chain counts, then hang each strand by its loop.

Finished Size and Construction

  • Finished size: 45 in × 61 in (114.3 cm × 154.9 cm)
  • Skill level: Easy-intermediate
  • Terminology: US terms
  • Yarn weight: DK (#3), cotton or cotton blend
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 40 stars, 40 snowflakes, 160 leaves, 10 cords
  • Layout: 10 strands, spaced 4.5 in (11.4 cm) apart center to center
  • Piece size: Star and snowflake 3.75 in (9.5 cm); leaf 2 in × 1 in (5.1 cm × 2.5 cm)
  • Strand length before loop: 58 in (147.3 cm)
  • “Border” depth: 3 in (7.6 cm) hanging loop at the top of each strand

Materials

Choose a smooth, mercerized DK cotton. It holds crisp points, doesn’t fuzz in sunlight and keeps the cords from stretching. The amounts below assume about 125 m per 50 g.

  • Burgundy: 150 g (375 m) for the stars
  • Cream: 150 g (375 m) for the snowflakes and cords
  • Sage green: 125 g (313 m) for the leaves

Tools:
– 4.0 mm (G-6) crochet hook
– Tapestry needle
– Stitch markers (at least 20)
– Scissors
– Tape measure
– Blocking mat and rust-proof pins
– Spray bottle

All quantities include roughly a 15% margin for gauge swatches and tails.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • sp – space
  • st(s) – stitch(es)
  • MR – magic ring

Special stitch – Picot loop: Ch 3, sl st in the same chain or stitch you started from.

Gauge and Checkpoints

Make one star, one snowflake, one leaf and a 16-ch test cord before you start production. Check each one against these sizes:

  • Star after Rnd 3: 2.25 in (5.7 cm) across
  • Star finished: 3.75 in (9.5 cm) from point to opposite point
  • Snowflake after Rnd 2: 1.75 in (4.4 cm) across
  • Snowflake finished: 3.75 in (9.5 cm) from arm tip to opposite arm tip
  • Leaf: 2 in (5.1 cm) long, 1 in (2.5 cm) wide
  • Cord: 16 ch with sl sts worked back = 4 in (10.2 cm), which is 4 ch per inch

If your motifs come out larger than 3.75 in (9.5 cm), go down to a 3.5 mm hook. If they come out smaller than 3.5 in (8.9 cm), go up to a 4.5 mm hook.

Cord gauge matters most, because every motif position is counted in chains. If your cord is longer than 4 in (10.2 cm) per 16 ch, chain more tightly or use a smaller hook for the cords only.

Crocheted snowflake ornament featuring cream textured petals, green leaves, and burgundy cord against soft background.

Burgundy Star (make 40)

Each star is one piece worked in the round. Do not turn between rounds.

Rnd 1: MR, ch 3 (counts as dc), 11 dc in ring, sl st in top of ch-3. Pull the ring closed, leaving a small center hole. (12 dc)

Rnd 2: Ch 5 (counts as dc + ch 2), dc in next dc, ch 2; repeat from * 10 more times, sl st in 3rd ch of beginning ch-5. (12 dc, 12 ch-2 sps)
This round makes the ring of lacy openings.

Rnd 3: Sl st in first ch-2 sp, ch 3 (counts as dc), 2 dc in same sp, 3 dc in each remaining ch-2 sp, sl st in top of ch-3. (36 dc)
Checkpoint: 2.25 in (5.7 cm) across.

Rnd 4 (points): Ch 1, sc in next st, hdc in next st, dc in next st, (tr, ch 2, tr) in next st, dc in next st, hdc in next st; repeat from * 5 more times, sl st in first sc.
This is a conversion round. Each repeat uses 6 stitches and makes 7, so the count is 36 stitches worked one per stitch + 6 extra tr = 42 sts plus 6 ch-2 tips.

Rnd 5 (edging): Ch 1, sc in each st around, working (sc, ch 2, sc) in each ch-2 tip, sl st in first sc.
This is a trim round: 42 sc worked one per stitch + 12 sc added at the tips = 54 sc plus 6 ch-2 tips.

Fasten off, leaving a 10 in (25.4 cm) tail for sewing. Weave in the starting tail.

Cream Snowflake (make 40)

Rnd 1: MR, ch 3 (counts as dc), 11 dc in ring, sl st in top of ch-3. (12 dc)

Rnd 2: Ch 1, sc in same st, ch 4, skip next dc, sc in next dc; repeat from * 4 more times, ch 4, sl st in first sc. (6 sc, 6 ch-4 sps)
Checkpoint: 1.75 in (4.4 cm) across.

Rnd 3 (arms): Sl st in first ch-4 sp. Then repeat the following in each of the 6 ch-4 sps:

  1. Work (sc, hdc, dc) in the ch-4 sp.
  2. Arm: Ch 9, sl st in 4th ch from hook (first tip loop). Make 2 picot loops in that same ch, giving a three-loop tip.
  3. Sl st in the next 2 ch, then make 2 picot loops in the last ch you worked (the paired branch picots).
  4. Sl st in the remaining 3 ch, back to the base.
  5. Work (dc, hdc, sc) in the same ch-4 sp.

Sl st in the first sc to join.

Count: 36 sts (6 per sp) and 6 arms. Each arm has a 5-ch stem, a three-loop tip and one pair of branch picots.

Fasten off, leaving a 10 in (25.4 cm) tail. Weave in the starting tail.

Green Leaf (make 160)

Each leaf is worked around both sides of a foundation chain. The chain becomes the center vein.

Foundation: Ch 10.

Rnd 1:
– First side: Sc in 2nd ch from hook, hdc in next ch, dc in next 4 ch, hdc in next ch, sc in next ch, 3 sc in last ch.
– Second side: Rotate to work along the other side of the chain. Sc in next ch, hdc in next ch, dc in next 4 ch, hdc in next ch, sc in next ch.

That gives 8 + 3 + 8 = 19 sts.

Tip: Ch 2, sl st in 2nd ch from hook, then sl st in first sc.

Fasten off, leaving an 8 in (20.3 cm) tail at the base for sewing. The leaf should measure 2 in × 1 in (5.1 cm × 2.5 cm).

Cream Cord (make 10)

Foundation: Ch 256.

Row 1: Sl st in the back bump of 2nd ch from hook and in each ch across. (255 sl sts)

Fasten off. The cord should measure about 64 in (162.6 cm).

Hanging loop: Fold the first 24 ch at the top end back on themselves and sew the end securely to the cord. You now have a loop 6 in (15.2 cm) around that hangs 3 in (7.6 cm) deep. Below the loop are 232 ch, or 58 in (147.3 cm), of working strand.

Place a marker at the loop join and call this ch 0. Count every placement below from this point.

Make All Pieces

Totals by color:
– Burgundy: 40 stars
– Cream: 40 snowflakes and 10 cords
– Green: 160 leaves (80 pairs)

Each strand carries: 4 stars, 4 snowflakes and 8 leaf pairs.

There are two strand types:
– Strand A starts with a star.
– Strand B starts with a snowflake.

Hang them in the order A, B, A, B and so on. In the grid below, S = star, F = snowflake and L = leaf pair; the top row is the highest motif.

Strand:  1  2  3  4  5  6  7  8  9  10
         S  F  S  F  S  F  S  F  S  F
         L  L  L  L  L  L  L  L  L  L
         F  S  F  S  F  S  F  S  F  S
         L  L  L  L  L  L  L  L  L  L
         (repeat these 4 rows 4 times in total)

Joining (Sewing Motifs to Cords)

Lay each cord flat and unstretched. Mark the chain positions below. The pattern repeats every 54 ch, or 13.5 in (34.3 cm).

Strand A, first repeat:
– Star: top point at ch 8, bottom point at ch 23 (15 ch = 3.75 in / 9.5 cm)
– Leaf pair: bases at ch 30
– Snowflake: top arm at ch 35, bottom arm at ch 50
– Leaf pair: bases at ch 57

Next three repeats: Add 54 ch to every position for each repeat. That puts the star tops at ch 8, 62, 116 and 170, and the snowflake tops at ch 35, 89, 143 and 197.

The last snowflake ends at ch 212, and its leaf pair sits at ch 219. That leaves 13 ch, or 3.25 in (8.3 cm), of bare cord below the final leaves.

Strand B: Use the same positions with stars and snowflakes swapped.

How to sew:
1. Center each motif over the front of the cord, with one point (or arm) straight up and one straight down.
2. Using the motif’s tail, sew through the top tip and one cord stitch with 3 small stitches.
3. Run the needle down the back of the motif and tack the center ring to the cord.
4. Secure the bottom tip the same way.
5. For each leaf pair, sew both leaf bases to the same cord stitch, angled up and out in a V at about 45 degrees.

Tension: Keep the stitches snug but don’t pull. Over-tight sewing gathers the cord and shortens the strand.

Checkpoint: Each finished strand measures 58 in (147.3 cm) from the loop join to the bottom end.

Border (Hanging Loops and Finishing)

This curtain has no fabric edge, so its “border” is the row of hanging loops along the top and the fastened-off ends at the bottom.

Border gauge: Same as the cord, 4 ch per inch.

Top loop, per strand: 24 ch folded in half = 6 in (15.2 cm) around, hanging 3 in (7.6 cm). That’s enough to slip over a rod up to 1.5 in (3.8 cm) across.

Top edge across the panel: 10 loops at 4.5 in (11.4 cm) apart. That gives 10 × 4.5 in = 45 in (114.3 cm) of width.

Bottom edge: Weave the last tail up through the cord for 2 in (5.1 cm), then trim. This keeps the ends from fraying.

Why the math works:
– 24 loop ch + 232 strand ch = 256 foundation ch.
– The strand holds 8 bare ch at the top + 4 repeats of 54 ch (216 ch) + 8 bare ch at the bottom, for 232 ch in total.
– The final leaf pair takes 5 of those last 13 ch, which leaves 8 bare ch, the same as at the top.

Spacing: Motifs are 3.75 in (9.5 cm) wide and strands are 4.5 in (11.4 cm) apart, so neighboring motifs clear each other by 0.75 in (1.9 cm).

Final Blocking

  1. Wet-block the motifs before you sew them on. Spritz each one until it’s evenly damp.
  2. Pin stars at all 6 points to a 3.75 in (9.5 cm) circle, keeping the points sharp.
  3. Pin snowflakes at each three-loop tip, then open each pair of branch picots with a pin.
  4. Pin leaves flat, with the tip pointed and the vein straight.
  5. Let everything dry completely, about 12–24 hours.
  6. After sewing, hang each strand and lightly mist the cord. Let gravity straighten it.
  7. Trim any stray fibers once dry.

Final Quality-Control Checklist

  • Every star has 54 sc and 6 sharp tips.
  • Every snowflake has 6 arms, each with a three-loop tip and paired picots.
  • Every leaf has 19 sts and a pointed tip.
  • Each cord is 58 in (147.3 cm) below the loop.
  • Motif tops sit at the correct chain counts.
  • Strands alternate A and B across the rod.
  • All tails are woven in at least 2 in (5.1 cm).
  • No motif twists to face backward when it hangs.

Troubleshooting

Star points are rounded. Make sure the tr pair and ch-2 tip in Rnd 4 go into a single stitch, and pin the tips firmly when blocking.

Snowflake arms curl. Your sl sts are too tight. Loosen them, or work the arm chains with a hook one size larger.

Leaves cup. Try 2 sc in the last ch instead of 3, or chain more loosely.

Strands hang at different lengths. Your cord tension varied. Re-measure each strand and add or remove bare chains at the bottom tail to even them out.

Motifs spin to face backward. Add a second tack stitch at the center back.

Care

Hand wash in cool water with mild soap and lay flat to dry. Hang the strands while slightly damp so they dry straight.

Burgundy and white crochet star garland with green leaves hanging across a window amid Christmas greenery and twinkling lights.

Final Notes

The measurement chain is simple:
– 4 ch per inch on the cord
– 3.75 in (9.5 cm) motifs and 2 in (5.1 cm) leaves
– a 54-ch (13.5 in / 34.3 cm) repeat, worked 4 times on a 58 in (147.3 cm) strand
– 10 strands at 4.5 in (11.4 cm) apart for a 45 in (114.3 cm) panel

Check your gauge at each stage and the curtain will hang evenly from end to end.

Happy crocheting!

Leave a Comment