This curtain is made of tall, narrow lace strips. Each strip holds a column of openwork Christmas trees stacked one above the other, with straight rails down both long edges.
The sample uses two colors, forest green and natural cream, in alternating strips: green, cream, green, cream, green, cream, green. Each tree has three fan-shaped tiers with open ch-1 spokes, a narrow neck between tiers, and a small grid trunk. Light chain swags link each tree to the next one and to the side rails.
The pattern uses US crochet terms. Each finished strip measures 4.5 in (11.4 cm) wide and 73.5 in (186.7 cm) long including the border, plus a 2.75 in (7.0 cm) hanging tab. Seven strips hung with small gaps fill about 34.5 in (87.6 cm) of rod.
Each strip is worked flat in rows from the top edge down. Every row has exactly 23 stitches, counting chains, so the edges stay straight. You work a 10-row tree repeat twelve times and add a closing row. Then you work a two-round border and a hanging tab. The strips are not sewn to each other.
Finished Size and Construction
- Finished size (curtain): about 34.5 in (87.6 cm) wide on the rod, with a drop of 76.25 in (193.7 cm) from the top of the tabs
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Sport / #2 fine mercerized cotton
- Hook: 3.25 mm (US D-3)
- Number of pieces: 7 separate strips (4 green, 3 cream)
- Layout: 7 strips in one row, hung side by side, not joined
- Strip size before border: 4 in (10.2 cm) wide x 73 in (185.4 cm) long
- Strip size after border: 4.5 in (11.4 cm) wide x 73.5 in (186.7 cm) long
- Border depth: 0.25 in (0.6 cm) on every edge
- Trees per strip: 12, each 6 in (15.2 cm) tall after blocking
Materials
Use a smooth mercerized cotton in sport weight. Cotton holds the tree shapes after blocking and does not stretch out much while it hangs.
- Color A, forest green: 500 g, about 1,550 yd (1,417 m), for 4 strips (ten 50 g balls of about 155 yd / 142 m each)
- Color B, natural cream: 400 g, about 1,240 yd (1,134 m), for 3 strips (eight 50 g balls)
One strip uses about 110 g. These quantities include a margin of about 10% for swatching, tabs and weaving in ends.
Tools
- 3.25 mm (US D-3) crochet hook
- Tapestry needle
- Stitch markers
- Rust-proof pins and a long blocking surface
- Spray bottle
- Measuring tape
- Curtain rod up to 1.5 in (3.8 cm) in diameter
Abbreviations (US Terms)
- ch: chain
- sk: skip
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- tr: treble crochet
- st(s): stitch(es)
- RS: right side
- [ ] x times: repeat the steps in brackets the number of times given
Special rule: filet counting. In every row, each chain counts as one stitch. When the pattern says “dc in next st” and that st is a chain, insert the hook under the chain itself, not into the space. This keeps every row at exactly 23 sts and puts each tree on the center stitch (st 12).
Gauge and Checkpoints
Gauge: 23 sc = 4 in (10.2 cm) across Row 1. One 10-row tree repeat = 5.75 in (14.6 cm) unblocked and 6 in (15.2 cm) after blocking.
Test one short strip first. Work Row 1, two full tree repeats and the closing rows, then wet-block it.
Checkpoints:
- After Row 1: the sc row measures 4 in (10.2 cm) wide.
- After the first repeat (Row 11): the strip is still 4 in (10.2 cm) wide, and the repeat is about 5.75 in (14.6 cm) tall unblocked.
- After six repeats (Row 61): the strip is about 34.75 in (88.3 cm) long unblocked.
- Before the border: blocked length is 73 in (185.4 cm) and width is 4 in (10.2 cm).
- After the border: 4.5 in (11.4 cm) x 73.5 in (186.7 cm).
If your strip is too wide, go down to a 3 mm hook. If it is too narrow, go up to a 3.5 mm hook. If the width is right but the repeats are too short, pull up the first loop of each tr a little taller. Small length errors can be fixed during blocking.

Strip Pattern
Make 7 strips: 4 in Color A and 3 in Color B. Work all rows flat and turn at the end of every row. The first and last st of every row are the rails. Turning chains count as the first st.
Top Edge
Foundation: Ch 24.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (23 sc)
Tree Repeat (Rows 2–11)
Row 2 (swag row): Ch 3 (counts as dc), ch 4, sk 4 sts, sc in next st, ch 5, sk 5 sts, sc in next st (center st 12), ch 5, sk 5 sts, sc in next st, ch 4, sk 4 sts, dc in last st, turn. (2 dc, 3 sc, 18 ch = 23 sts)
Row 3 (tree tip): Ch 3, ch 9, sk 9 sts, dc in each of next 3 sts (centered on st 12), ch 9, sk 9 sts, dc in last st, turn. (5 dc, 18 ch = 23 sts)
Row 4 (top tier neck): Ch 3, ch 7, sk 7 sts, dc in next st, [ch 1, sk 1, dc in next st] 3 times, ch 7, sk 7 sts, dc in last st, turn. (6 dc, 17 ch = 23 sts)
The tip now flares into a 7-st fan with 3 open spokes.
Row 5 (top tier edge): Ch 4 (counts as tr), ch 5, sk 5 sts, tr in next st, [ch 1, sk 1, tr in next st] 5 times, ch 5, sk 5 sts, tr in last st, turn. (8 tr, 15 ch = 23 sts)
The first tier is complete and 11 sts wide.
Row 6 (middle tier neck): Work as Row 4. (6 dc, 17 ch = 23 sts)
Narrowing back to 7 sts creates the waist between tiers.
Row 7 (middle tier edge): Ch 4, ch 3, sk 3 sts, tr in next st, [ch 1, sk 1, tr in next st] 7 times, ch 3, sk 3 sts, tr in last st, turn. (10 tr, 13 ch = 23 sts)
The middle tier is 15 sts wide.
Row 8 (bottom tier neck): Work as Row 4. (6 dc, 17 ch = 23 sts)
Row 9 (bottom tier edge): Ch 4, ch 1, sk 1 st, tr in next st, [ch 1, sk 1, tr in next st] 9 times, ch 1, sk 1 st, tr in last st, turn. (12 tr, 11 ch = 23 sts)
The bottom tier is 19 sts wide and nearly touches the rails.
Row 10 (trunk): Ch 3, ch 8, sk 8 sts, dc in next st, [ch 1, sk 1, dc in next st] 2 times, ch 8, sk 8 sts, dc in last st, turn. (5 dc, 18 ch = 23 sts)
Row 11 (trunk): Work as Row 10. (5 dc, 18 ch = 23 sts)
The two trunk rows form a small grid of 2 x 2 open boxes.
Rows 12–121: Repeat Rows 2–11 eleven more times. (12 trees total, 23 sts in every row)
Bottom Edge
Row 122: Work as Row 2. (23 sts)
Row 123: Ch 1, sc in each st across. (23 sc) Fasten off.
Checkpoint: 123 rows, 12 trees, 23 sts per row. The unblocked strip is about 70 in (177.8 cm) long. It reaches 73 in (185.4 cm) after blocking.
Make All Pieces
- Color A (green): 4 strips
- Color B (cream): 3 strips
Block each strip lightly before adding its border, so you measure its true length. Lay the strips out in this order, seen from the room side:
| A | B | A | B | A | B | A |
1 2 3 4 5 6 7
Green strips sit at both outer edges and in the center.
Hanging the Strips (No Seaming)
The strips are not crocheted or sewn to one another. Each one hangs from its own tab.
Stitch logic: Each tab is worked into the center 7 sts of the strip’s top border. The tab sits right above the center stitch, so the trees hang straight and centered.
Spacing: Slide the tabs onto the rod in the A–B order above. Leave about 0.5 in (1.3 cm) between strips. Seven strips at 4.5 in (11.4 cm) each add up to 31.5 in (80.0 cm), and six gaps of 0.5 in (1.3 cm) add 3 in (7.6 cm).
Tension: Whipstitch the tab ends firmly, but not so tight that the top edge puckers. The top edge should stay flat and 4.5 in (11.4 cm) wide.
Size checkpoint: On the rod, the curtain measures about 34.5 in (87.6 cm) across. If your rod is wider, add strips in pairs (one A, one B) or make the gaps slightly wider.
Border
Border gauge: 5.75 sc = 1 in (2.5 cm), the same as Row 1.
Round 1: With RS facing, join yarn in the first st of Row 123 (a bottom corner). Ch 1, 3 sc in same st, sc in each of next 21 sts, 3 sc in last st (corner). Work up the side from Row 122 to Row 2, with 3 sc in the end of each dc row and 4 sc in the end of each tr row. Work 3 sc in the first st of Row 1 (corner), sc in each of next 21 sts, 3 sc in last st (corner). Work down the second side from Row 2 to Row 122 the same way. Join with sl st to first sc. (852 sc)
Counts per side for Round 1:
- Top edge: 21 sc between corners
- Bottom edge: 21 sc between corners
- Each long side: 399 sc between corners
- Corners: 3 sc each, 12 sc in total
Check: 21 + 21 + 399 + 399 + 12 = 852 sc.
Round 2: Ch 1, sl st loosely in each sc around. Join with sl st to first sl st. (852 sl sts) Fasten off.
Why the math works: Each tree repeat has 7 dc rows and 3 tr rows, which gives (7 x 3) + (3 x 4) = 33 sc per repeat. Twelve repeats give 396 sc. Row 122, a dc-rail row, adds 3, for 399 sc per side. The corner stitches cover Rows 1 and 123. Over a blocked repeat of 6 in (15.2 cm), 33 sc works out to 5.5 sc per inch. That is slightly fewer than the 5.75 sc gauge, so the border keeps the rails a little firm and stops them from stretching while the curtain hangs. The top and bottom edges use 1 sc per st (21 + 2 corner center sts = 23), so the width does not change.
Hanging Tab
Row 1: With RS facing, join yarn in the 8th of the 21 border sts along the top edge. Ch 1, sc in same st and in each of next 6 sts, turn. (7 sc)
Rows 2–25: Ch 1, sc in each st across, turn. (7 sc)
The tab should be 5.5 in (14.0 cm) long and about 1.25 in (3.2 cm) wide. Fasten off, leaving a 12 in (30.5 cm) tail. Fold the tab to the back and whipstitch the last row to the back of the top border. This makes a loop 2.75 in (7.0 cm) tall.
Final Blocking
- Weave in all ends along the rails, never across the open spokes.
- Soak each strip in cool water for 10 minutes, then press the water out in a towel. Do not wring.
- Lay the strip flat and pin both rails straight to 73.5 in (186.7 cm) long and 4.5 in (11.4 cm) wide.
- Pin the outer tip of every tier spoke so the fans open evenly.
- Pin the swag loops into neat triangles between the trees and the rails.
- Let the strip dry completely, about 24 hours, then unpin it and measure again.
Final Quality-Control Checklist
- Every strip has 12 trees, and each tree sits on the center stitch.
- Each tree has three tiers that widen from top to bottom (11, 15 and 19 sts) and a 2 x 2 grid trunk.
- All strips measure 4.5 in (11.4 cm) x 73.5 in (186.7 cm) after blocking.
- Both rails are straight and the border lies flat.
- Each tab is centered on the top edge and fits easily over the rod.
- The order on the rod is A, B, A, B, A, B, A.
- All ends are secure and hidden.
Troubleshooting
Rows no longer have 23 sts. You probably worked into a space instead of into a chain. Count each chain as a stitch and keep a marker on st 12.
Trees lean to one side. The tip in Row 3 is off center. It must sit above the center sc of Row 2.
Rails ripple after the border. There are too many sc on the sides. Use only 3 sc per dc row and 4 sc per tr row.
Rails pull short and the trees bunch up. The border is too tight. Go up one hook size for Round 1 only.
Strips are different lengths. Re-wet the short strip and pin it to 73.5 in (186.7 cm).
Care
Hand wash in cool water with mild soap and dry flat. Re-block if the trees lose their shape after washing.

Final Notes
Here is the full measurement chain. Row 1 sets the width: 23 sc measure 4 in (10.2 cm). Each 10-row tree repeat blocks to 6 in (15.2 cm), and twelve repeats plus the edge rows give 73 in (185.4 cm). The border adds 0.25 in (0.6 cm) on every edge, so each strip measures 4.5 in (11.4 cm) x 73.5 in (186.7 cm). Seven strips with small gaps fill about 34.5 in (87.6 cm) of rod.
Check each strip against these numbers as you go, and the trees will line up across the whole curtain.
Happy crocheting!