Hearthside Shell Bell Ornament Crochet Pattern

This little bell ornament has a lacy cream body with a warm rust crown and outline. Fans of double crochet stack in three tiers, so the bell is narrow at the top and flares at the bottom like a real bell. A small cream clapper and a slim rust loop finish it off.

The cream and rust colors give the bell a cozy gingerbread look. It works well on a tree, on top of a gift tag, or tied to a wreath. It is flat and light, so it hangs straight and does not spin.

The pattern uses US crochet terms. The finished bell measures about 4 in (10.2 cm) wide and 4.8 in (12.2 cm) tall including the clapper. With the hanging loop, it hangs about 6.8 in (17.3 cm) long.

Construction is simple. You work the cream body flat in four rows from the top down, then work a rust crown directly onto the starting chain. One round of rust single crochet outlines everything. Last, you make a chain-cord loop and a small circle clapper and sew them on.

Finished Size and Construction

  • Finished size: 4 in (10.2 cm) wide x 4.8 in (12.2 cm) tall with clapper; 6.8 in (17.3 cm) with loop
  • Skill level: Easy
  • Terminology: US crochet terms
  • Yarn weight: Medium (#4) cotton
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 1 ornament (bell body with attached crown, plus a small loop and clapper sewn on)
  • Layout: Single bell, no motifs to join
  • Bell size before border: 3.5 in (8.9 cm) wide x 3.6 in (9.1 cm) tall
  • Border depth: 0.25 in (0.6 cm) on every edge

Materials

Choose a smooth mercerized or combed cotton in medium (#4) weight. Cotton holds the fan shapes crisply and blocks flat. Acrylic works too, but the fans will be softer and may need extra starch.

  • Cream: about 8 g / 14 m (15 yd)
  • Rust/terracotta: about 6 g / 11 m (12 yd)

These amounts include a margin of about 25% for gauge differences, swatching and weaving in ends. One standard ball of each color makes many bells.

Tools:

  • 4.0 mm (G-6) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch marker
  • Rust-proof pins and a foam blocking board
  • Spray bottle; fabric stiffener or spray starch (optional)

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • st(s) – stitch(es)
  • sk – skip
  • RS / WS – right side / wrong side

Special stitch – Fan: Work the stated number of dc (5 or 7) all into the same stitch. The fan opens downward, away from the stitch it is worked into.

Sc2tog: (Insert hook in next st, yarn over, pull up a loop) twice, yarn over, pull through all 3 loops on hook.

Gauge and Checkpoints

Gauge: 16 sc and 18 rows = 4 in (10.2 cm) in rows of sc. A 5-dc fan is about 1 in (2.5 cm) wide and 0.75 in (1.9 cm) tall. A 7-dc fan is about 1.15 in (2.9 cm) wide.

Make one test bell before buying more yarn or planning a batch. Check it at each stage:

  • After Row 1: 9 sc = 2.25 in (5.7 cm) wide, 0.25 in (0.6 cm) tall
  • After Row 2: 2.5 in (6.4 cm) wide, 1 in (2.5 cm) tall
  • After Row 3: 3 in (7.6 cm) wide, 1.75 in (4.4 cm) tall
  • After Row 4: 3.5 in (8.9 cm) wide, 2.5 in (6.4 cm) tall
  • After crown: 3.6 in (9.1 cm) tall in total; crown top 1.25 in (3.2 cm) wide
  • After border: 4 in (10.2 cm) wide, 4.1 in (10.4 cm) tall

If your bell is too big, go down one hook size. If it is too small, go up one hook size. Small differences are fine for an ornament, but use the same hook for every bell in a set so they match.

Crocheted bell ornament with terracotta top, cream diamond-patterned body, on white marble background.

Bell Body (Cream)

The body is worked flat from the top edge down. Each fan opens toward the bottom, so the bell gets wider with every row.

Foundation: With cream, ch 10.

Row 1 (RS): Sc in 2nd ch from hook and in each ch across. Turn. (9 sc)

Row 2 (WS): Ch 1, sc in first sc, sk 1 sc, 5 dc in next sc (fan made), sk 1 sc, sc in next sc; repeat from * once more. Turn. (2 fans, 3 sc = 13 sts)

Check: the sc go in stitches 1, 5 and 9, and the fans go in stitches 3 and 7. This row is the top tier of two fans.

Row 3 (RS): Ch 3 (counts as first dc), 4 dc in first sc (edge fan made), sc in center (3rd) dc of next fan, 5 dc in next sc, sc in center dc of next fan, 5 dc in last sc. Turn. (3 fans, 2 sc = 17 sts)

This is the middle tier of three fans. The two edge fans sit in the outer sc of Row 2, so they splay outward and start the bell’s flare. The center fan sits between the two fans above it, which gives the offset honeycomb look.

Row 4 (WS): Ch 1, sc in first dc of fan, sk 1 dc, 7 dc in center dc of fan, sk 1 dc, sc in last dc of same fan, sk next sc; repeat from * to * once more, then repeat from * to ** once. On the last fan, the “last dc” is the top of the turning ch-3. (3 fans of 7 dc, 6 sc = 27 sts)

This is the bottom tier. Each 7-dc fan sits directly under a Row 3 fan, so the lower two tiers line up in columns. The larger fans make the scalloped lower edge and the widest point of the bell.

Fasten off cream and weave in the end. Do not turn.

Crown (Rust)

The crown is a solid dome worked in rows of sc into the free loops of the foundation chain.

Row 1 (RS): Rotate the body so the foundation chain is on top. With RS facing, join rust in the first free loop of the foundation chain. Ch 1, sc in same loop and in each free loop across. Turn. (9 sc)

Row 2: Ch 1, sc in each sc across. Turn. (9 sc)

Row 3: Ch 1, sc2tog, sc in next 5 sc, sc2tog. Turn. (7 sts)

Row 4: Ch 1, sc in each st across. Turn. (7 sc)

Row 5: Ch 1, sc2tog, sc in next 3 sc, sc2tog. (5 sts)

The crown is now about 1.1 in (2.8 cm) tall, 2.25 in (5.7 cm) wide at the base and 1.25 in (3.2 cm) wide at the top. The decreases on Rows 3 and 5 round the shoulders into a dome. Do not fasten off; the border starts here.

Border (Rust)

Border gauge: 4 sc per 1 in (2.5 cm), worked into stitch tops and row ends.

Border Round: Ch 1, turn so the RS faces you again. Work around the whole bell as follows:

  • Crown top: 2 sc in first st, sc in next 3 sts, 2 sc in last st. (7 sc = 5 sts worked 1 per stitch + 2 extra)
  • Crown side: 1 sc in the end of each crown row (Rows 5 to 1). (5 sc)
  • Body side: 1 sc in the end of Row 1, 3 sc evenly along the end of Row 2, 3 sc evenly along the end of Row 3 and 2 sc along the end of Row 4, stopping just before the bottom corner stitch. (9 sc)
  • Bottom edge: 3 sc in the first st of Row 4 (corner), sc in each of next 25 sts, 3 sc in last st (corner). (31 sc = 27 sts worked 1 per stitch + 4 extra at the corners)
  • Body side: 2 sc along the end of Row 4, 3 sc along Row 3, 3 sc along Row 2 and 1 sc in the end of Row 1. (9 sc)
  • Crown side: 1 sc in the end of each crown row (Rows 1 to 5). (5 sc)

Sl st to first sc to join. (66 sc total: 7 + 5 + 9 + 31 + 9 + 5)

Fasten off, leaving a 6 in (15.2 cm) tail.

Why the math works: Each body side is about 2.6 in (6.6 cm) long on the slant. At 4 sc per inch, it needs about 10 sc. The 9 side sc plus the shared corner stitch at the bottom give 10 stitches of coverage, so the side lies flat without pulling. Each crown side is about 1.25 in (3.2 cm) along the curve, which matches 5 sc. On the bottom, each 7-dc fan already has one dc top per stitch around its curve, so 1 sc per stitch keeps the scallops smooth. The sc between fans sit in the valleys, where a few stitches naturally bunch together, and that balances the longer outer curves. The 3-sc corners turn the sharp flare points without cupping.

Hanging Loop (Rust)

Ch 30, leaving a 6 in (15.2 cm) starting tail. Sl st in the back bump of 2nd ch from hook and in each back bump across. (29 sl st) Fasten off, leaving a 6 in (15.2 cm) tail.

This makes a firm, braided-looking cord about 4 in (10.2 cm) long. Fold it in half and sew both ends to the center top of the crown, stitching through the border round. The finished loop stands about 2 in (5.1 cm) above the bell.

Clapper (Cream)

Round 1: Make a magic ring. Ch 3 (counts as first dc), 11 dc in ring. Pull the ring closed. Sl st to top of ch-3. (12 dc)

Round 2: Ch 1, sc in next st, 2 sc in next st; repeat from * 5 more times. Sl st to first sc. (18 sc)

The clapper measures about 1 in (2.5 cm) across. Fasten off, leaving an 8 in (20.3 cm) tail.

Center the clapper under the middle fan of Row 4. Let it overlap the bottom border by about 0.3 in (0.8 cm). Sew it to the back of the border with small stitches so they don’t show on the RS. The finished height with the clapper is about 4.8 in (12.2 cm).

Final Blocking

  1. Weave in all remaining ends through stitches of the same color.
  2. Lightly mist the bell with water until damp, not soaked.
  3. Lay it RS up on a blocking board.
  4. Pin the crown top, then pin each bottom corner so the bell is 4 in (10.2 cm) wide.
  5. Pin the tip of each bottom fan so the scallops are even.
  6. Check the height from crown top to bottom border: 4.1 in (10.4 cm).
  7. Shape each fan with your fingertips so the gaps between fans look even.
  8. For a crisp ornament, spray lightly with starch or fabric stiffener.
  9. Let it dry completely, at least 4 hours, before unpinning.
  10. Smooth the loop so it hangs straight and centered.

Final Quality-Control Checklist

  • Row 2 has 13 sts, Row 3 has 17 sts and Row 4 has 27 sts.
  • The tiers show 2, 3 and 3 fans from top to bottom.
  • The crown ends with 5 sts and has a smooth dome shape.
  • The border round has 66 sc with no gaps at the corners.
  • The bell measures 4 in (10.2 cm) wide and 4.1 in (10.4 cm) tall before the clapper.
  • The clapper and the loop are both centered.
  • No ends show on the RS.

Troubleshooting

The bell curls or cups. Your fans may be tight. Go up a hook size, or block with more moisture and pins.

The border ripples on the bottom edge. You may have added extra sc. Count 31 sc along the bottom and redo it if needed.

The sides pull in. Add 1 extra sc along the end of Row 3 on each side, and update your total.

The crown looks pointy. Make sure the sc2tog go at both ends of Rows 3 and 5, not in the middle.

The fans lean to one side. Check that each fan sits in the correct stitch by counting the stitches of the row before.

The loop twists. Sew both ends flat side by side, not on top of each other.

Care

Hand wash in cool water with mild soap, then reshape and dry flat. If you used starch, reapply it after washing.

Rust-red and cream crocheted bell ornament hanging on green tree branch with warm glowing lights.

Final Notes

The measurements build up step by step. Row 1 is 2.25 in (5.7 cm) wide. By Row 4 the body is 3.5 in (8.9 cm) wide and 2.5 in (6.4 cm) tall. The crown brings the height to 3.6 in (9.1 cm). The border adds 0.25 in (0.6 cm) on every edge, for 4 in (10.2 cm) x 4.1 in (10.4 cm). The clapper brings the height to 4.8 in (12.2 cm), and with the loop the bell hangs 6.8 in (17.3 cm) long.

Make one, check it, and then make enough to fill a tree.

Happy crocheting!

Leave a Comment