This hanging basket holds two spare toilet paper rolls. It has a flat oval base, lacy shell-stitch sides, and a rope-textured rim that curves up at both ends. Two ridged straps loop through wooden rings and hang from a wooden dowel, so the basket floats just off the wall.
The sample uses one cream cotton yarn. With the natural wood rings and dowel, it suits a calm, neutral bathroom. Cotton keeps its shape and holds up to washing.
The pattern uses US crochet terms throughout. The finished basket is about 13 in (33.0 cm) wide across the top opening and 7 in (17.8 cm) front to back. It is 4.25 in (10.8 cm) tall at the center front and 5.5 in (14.0 cm) tall at the raised ends.
The body is one piece. You work a solid oval base in rounds, turn the edge up with a back-loop round, and work alternating shell and lace rounds for the sides. Two shaping rounds raise the ends, and a two-round border finishes the rim. Then you make two straps and two short ring hangers, and sew them on.
Finished Size and Construction
- Finished size: 13 in (33.0 cm) wide x 7 in (17.8 cm) deep at the top; 4.25 in (10.8 cm) tall at center, 5.5 in (14.0 cm) tall at ends
- Base size: 10 x 4.25 in (25.4 x 10.8 cm)
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 5.0 mm (H-8)
- Number of pieces: 1 basket body worked in one piece, plus 2 straps and 2 ring hangers
- Layout: Oval basket with one strap at each short end
- Body height before border: 3.75 in (9.5 cm) at center, 5.0 in (12.7 cm) at ends
- Border depth: 0.5 in (1.3 cm)
Materials
Use a smooth, firm worsted-weight cotton or cotton blend. Soft acrylic will sag under the weight of the rolls. A tightly plied yarn shows the shell texture best.
- Cream: about 250 g / 425 m (100 g = 170 m). The body uses roughly 200 g and the straps and hangers about 25 g.
These quantities include a margin for your gauge swatch and for small differences in tension.
Tools and hardware:
- 5.0 mm (H-8) crochet hook
- 2 wooden rings, 2 in (5.1 cm) across
- 1 wooden dowel, 16 in (40.6 cm) long and 0.75 in (1.9 cm) across, with 2 wall brackets
- 4 locking stitch markers
- Tapestry needle
- Scissors
- Measuring tape
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- BLO – back loop only
- sp(s) – space(s)
- st(s) – stitch(es)
- rep – repeat
Special stitches
- Shell: 5 dc (Round 6) or 7 dc (Rounds 8 and 10), all worked into the same stitch.
- Reverse sc (crab stitch): Work sc from left to right (right-handed). Insert the hook in the next stitch to the right, yarn over, pull up a loop, then yarn over and pull through both loops. This makes a twisted, rope-like edge.
Gauge and Checkpoints
- Gauge: 14 dc x 7.5 rounds = 4 in (10.2 cm); 14 sc x 16 rows = 4 in (10.2 cm)
Use the base as your gauge test. Work Rounds 1–4, then lay the base flat and measure it before you go on.
- After Round 4: 84 sts, 10 x 4.25 in (25.4 x 10.8 cm)
- After Round 5: 84 sc, edge measures 24 in (61.0 cm) around
- After Round 10: sides 3 in (7.6 cm) tall, measured up from the Round 5 fold
- After Round 11: 112 sc, top edge 32 in (81.3 cm) around
- After Round 13: 3.75 in (9.5 cm) tall at center, 5.0 in (12.7 cm) at ends
- After the border: 4.25 in (10.8 cm) at center, 5.5 in (14.0 cm) at ends
If the base is more than 0.25 in (0.6 cm) too long, go down half a hook size. If it is too short, go up half a hook size. Then rework the base. Don’t add or skip stitches to fix the size, because every stitch count later in the pattern depends on the 84-stitch base.

Basket Body
Oval Base
Ch 22.
Round 1: Skip the first 2 ch. These 2 ch do not count as a stitch, which leaves 20 ch to work into. Dc in 3rd ch from hook and in next 18 ch, then 6 dc in last ch. Rotate and work along the opposite side of the foundation ch: dc in next 18 ch, then 5 dc in the same ch as the first dc. Join with sl st to first dc. (48 sts: 18 on each long side, 6 at each end)
Round 2: Ch 2 (does not count as a st now or in later rounds). Dc in each of the 18 side sts, and work 2 dc in each of the 6 sts at each end. Join. (60 sts: 18 per side, 12 per end)
Round 3: Ch 2. Dc in each side st. At each end, work (dc in next st, 2 dc in next st) 6 times. Join. (72 sts: 18 per side, 18 per end)
Round 4: Ch 2. Dc in each side st. At each end, work (dc in next 2 sts, 2 dc in next st) 6 times. Join. (84 sts: 18 per side, 24 per end)
Checkpoint: the base should measure 10 x 4.25 in (25.4 x 10.8 cm) and lie flat.
Turning Round
Round 5: Ch 1. Sc in BLO of each st around. Join to first sc. (84 sc)
The unworked front loops leave a crisp ridge, which helps the base sit flat as the sides turn upward.
Shell and Lace Sides
Round 6 (Shell A): Ch 1. Sc in first st, skip 2 sts, 5 dc in next st, skip 2 sts. Sc in next st, skip 2 sts, 5 dc in next st, skip 2 sts. Rep from * 12 more times. Join to first sc. (14 shells: 14 sc + 70 dc = 84 sts)
84 is a multiple of 6, so the 14 shells fit evenly: 3 along each long side and 4 around each end.
Round 7 (Lace): Sl st in next 3 dc to reach the center dc of the first shell. Ch 1, sc in same dc, ch 3, dc in next sc, ch 3. Sc in center dc of next shell, ch 3, dc in next sc, ch 3. Rep from * 12 more times. Join to first sc. (14 sc, 14 dc, 28 ch-3 sps)
Round 8 (Shell B): Ch 1. Sc in same sc, ch 1, skip ch-3 sp, 7 dc in next dc, ch 1, skip ch-3 sp. Sc in next sc, ch 1, skip ch-3 sp, 7 dc in next dc, ch 1, skip ch-3 sp. Rep from * 12 more times. Join to first sc. (14 shells: 14 sc, 98 dc, 28 ch-1 sps)
These shells sit above the Round 6 sc, so they fall halfway between the Shell A fans. The ch-3 loops underneath leave the open diamond-shaped gaps.
Round 9 (Lace): Sl st in next ch-1 sp and in next 4 dc to reach the center (4th) dc. Ch 1, sc in same dc, ch 3, dc in next sc, ch 3. Sc in center dc of next shell, ch 3, dc in next sc, ch 3. Rep from * 12 more times. Join. (14 sc, 14 dc, 28 ch-3 sps)
Round 10 (Shell C): Work as Round 8. (14 shells: 14 sc, 98 dc, 28 ch-1 sps)
Shell C lines up with Shell A, which completes the staggered pattern. The larger 7-dc shells make the sides flare gently into a bowl shape.
Checkpoint: the sides measure 3 in (7.6 cm) tall from the Round 5 ridge.
Rim Foundation
Round 11 (Conversion): Ch 1. Sc in each sc and each dc, and skip every ch-1 sp. Join. (14 sc + 98 dc worked 1 per stitch, + 0 extra = 112 sc)
Fasten off.
Flatten the basket so the long sides lie together, with the curved ends at the folds. Place marker A in the sc at the center of one end. Count 56 sts on from marker A and place marker B in that stitch. That leaves exactly 55 sts on each side between the markers: 1 + 55 + 1 + 55 = 112.
Crescent Shaping
These two rounds raise the ends without changing the stitch count. Each long side follows the same 55-stitch sequence: tr 6, dc 4, hdc 3, sc 29, hdc 3, dc 4, tr 6 (6 + 4 + 3 + 29 + 3 + 4 + 6 = 55).
Round 12: Join yarn with sl st in the marker A st. Ch 4 (counts as tr). Tr in next 6 sts, dc in next 4, hdc in next 3, sc in next 29, hdc in next 3, dc in next 4, tr in next 6. Tr in the marker B st. Rep the 55-st side sequence once more. Join to top of ch-4. (112 sts)
Move the markers up to the matching end stitches.
Round 13: Rep Round 12, starting in the marker A st (the top of the ch-4). (112 sts)
Checkpoint: 3.75 in (9.5 cm) tall at the center front and 5.0 in (12.7 cm) at each end. The ends are 1.25 in (3.2 cm) higher than the center.
Straps and Ring Hangers
Straps (make 2)
Ch 5.
Row 1: Sc in 2nd ch from hook and in each ch across. (4 sc)
Rows 2–40: Ch 1, turn. Sc in BLO of each st across. (4 sc)
The back-loop rows make the ridged texture. Each strap is 1.1 in (2.8 cm) wide and 10 in (25.4 cm) long. Fasten off and leave a 12 in (30.5 cm) tail.
Ring Hangers (make 2)
Work as the straps, but stop after Row 14. (4 sc; 3.5 in / 8.9 cm long)
Assembly
- Thread the top of each strap through a wooden ring. Fold back 1.5 in (3.8 cm) and whipstitch the end to the strap.
- Place the bottom 2 in (5.1 cm) of each strap inside the basket, centered on marker A or marker B. Whipstitch all four edges through the rim, Rounds 11–13. You will add the border after this, so it covers the stitching.
- Wrap each ring hanger around the dowel and through the top of a ring. Sew its short ends together.
About 5 in (12.7 cm) of strap shows between each ring and the rim.
Border
Border gauge: 14 sc = 4 in (10.2 cm), the same as the body sc gauge.
Round 14: Join yarn in the marker A st. Ch 1, sc in same st. Sc in each of the 55 sts along the first side, sc in the marker B st, then sc in each of the 55 sts along the second side. Join. (112 sc: 55 per side + 2 end sts)
When you reach a strap, work through both the rim and the strap so the join is locked in.
Round 15: Ch 1. Reverse sc in each st around. Join and fasten off. (112 reverse sc: 55 per side + 2 end sts)
Why the math works: Round 11 sets the top edge at 112 sts, or 32 in (81.3 cm) at 14 sts per 4 in. Rounds 12–15 are all worked 1 stitch into each stitch. Taller stitches add height at the ends but no width, so the border lies flat without ruffling or pulling in. Each side keeps its 55 sts, and the two end stitches stay lined up with the straps.
Final Blocking
- Weave in all ends inside the basket, running each along a solid round for 2 in (5.1 cm).
- Soak the basket in cool water for 10 minutes, then press out the water in a towel. Do not wring it.
- Stuff the basket firmly with a folded towel to shape a 13 x 7 in (33.0 x 17.8 cm) opening.
- Pat the base flat. Pull each shell into an even fan and open each lace diamond.
- Pin the straps straight and flat.
- Let it dry completely, which takes 24–48 hours for cotton.
Final Quality-Control Checklist
- Base measures 10 x 4.25 in (25.4 x 10.8 cm) and sits flat
- 14 shells in each of Rounds 6, 8, and 10, staggered from round to round
- Lace diamonds are open and even all the way around
- 112 sts in Rounds 11–15
- Center height 4.25 in (10.8 cm), end height 5.5 in (14.0 cm)
- Both straps are 10 in (25.4 cm) long and sewn on centered over the end stitches
- Rings hang level, and the basket does not tilt when loaded
Troubleshooting
- Base curls up: Your dc tension is too tight. Go up half a hook size.
- Base ruffles: Recount the end increases. Each end should gain exactly 6 sts per round.
- Shells lean or don’t line up: Check that you started Rounds 7 and 9 at the center dc of a shell.
- Rim waves: You probably added stitches in Rounds 12–13. Recount to 112.
- Ends don’t rise: Check that the tr sections are centered on the markers.
- Basket tilts: Make sure both straps are the same length and sewn at the same depth.
Care
Hand wash in cool water with mild soap and dry flat. Reshape the basket around a towel while it is damp.

Final Notes
Everything depends on the first measurement. An 84-stitch base at 10 x 4.25 in (25.4 x 10.8 cm) holds 14 even shells. The shells flare the top to 112 sts and 32 in (81.3 cm). The shaping rounds then raise the ends to 5.0 in (12.7 cm), and the border finishes the basket at 4.25 in (10.8 cm) tall at center and 5.5 in (14.0 cm) at the ends. If each checkpoint matches, the straps hang level and the basket holds two rolls without sagging.
Happy crocheting!