This little letter E is a soft, puffy keychain made in alternating stripes of lavender and pale butter yellow. The yellow rows are round puff stitches and the lavender rows are plain single crochet. A lavender border frames the whole letter so the stripes look neat and finished.
Three tiny daisies with cream petals and golden yellow centers sit along the spine, with sage green leaves tucked beside them. A gold split ring on a short chain lets you clip it to a tote bag, a zipper or a set of keys.
The pattern uses US crochet terms. The finished letter measures 3.0 in (7.6 cm) wide and 4.1 in (10.4 cm) tall, including the border.
You work the E flat in rows from the bottom up as one piece. The arms are added with foundation single crochet, so the letter itself needs no sewing. One round of single crochet borders the outline, and then the daisies and leaves are sewn on.
Finished Size and Construction
- Finished size: 3.0 in (7.6 cm) wide x 4.1 in (10.4 cm) tall
- Skill level: Advanced beginner
- Terminology: US crochet terms
- Yarn weight: DK (light #3)
- Hook: 3.5 mm (E-4)
- Number of pieces: 1 letter, plus 3 daisies and 5 leaves as appliqués
- Layout: One letter E, with the spine on the left and three arms pointing right
- Letter size before border: 2.6 in (6.6 cm) wide x 3.7 in (9.4 cm) tall
- Spine width: 1.0 in (2.5 cm), 5 stitches
- Border depth: 0.2 in (0.5 cm) on every side
Materials
Choose a smooth DK cotton or cotton blend. Cotton keeps the puff stitches crisp and holds up well on a bag. A softer acrylic also works, but the puffs will look rounder and less defined.
- Lavender (A): 5 g, about 12 m
- Pale butter yellow (B): 3 g, about 7 m
- Cream (C): 2 g, about 5 m
- Golden yellow (D): 1 g, about 2 m
- Sage green (E): 1 g, about 2 m
These amounts include a margin for swatching and tails.
Tools:
- 3.5 mm (E-4) crochet hook
- Tapestry needle
- Gold split key ring, 25 mm (1 in)
- Short gold chain (about 4 links) and 2 jump rings
- Two pairs of flat-nose pliers
- Scissors, stitch markers, ruler
- Blocking mat, rust-proof pins, spray bottle
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sc2tog: single crochet 2 together
- fsc: foundation single crochet
- st(s): stitch(es)
- RS / WS: right side / wrong side
Puff stitch (puff): (Yo, insert hook in st, yo, pull up a loop to 0.3 in / 0.8 cm) 3 times in the same st, yo, draw through all 7 loops on the hook. The puff counts as 1 st. Do not add a closing chain.
Foundation single crochet (fsc): Insert hook in the base of the last st made, yo, pull up a loop, yo, draw through 1 loop (this is the “chain” at the base), yo, draw through 2 loops. For each following fsc, insert the hook in the base chain of the previous fsc.
Gauge and Checkpoints
Gauge: 10 sts = 2.0 in (5.1 cm) across a puff row. One sc row plus one puff row = 0.5 in (1.3 cm) tall. Each sc row is about 0.2 in (0.5 cm) tall and each puff row is about 0.3 in (0.8 cm) tall.
Rows 1–3 work as a test piece. Make them, then measure before you continue:
- After Row 3: 2.6 in (6.6 cm) wide x 0.7 in (1.8 cm) tall
- After Row 6: 1.5 in (3.8 cm) total height
- After Row 9: 2.2 in (5.6 cm) total height; middle arm 2.2 in (5.6 cm) long
- After Row 12: 3.0 in (7.6 cm) total height
- After Row 15: 3.7 in (9.4 cm) tall x 2.6 in (6.6 cm) wide
- After the border: 3.0 in (7.6 cm) x 4.1 in (10.4 cm)
If Row 3 is wider than 2.8 in (7.1 cm), switch to a 3.25 mm hook. If it is narrower than 2.4 in (6.1 cm), switch to a 3.75 mm hook. If only the height is off, change how tall you pull up the puff loops instead of changing the hook.

The Letter E
Color note: Each row uses one color. Fasten off at the end of every row, leaving 3 in (7.6 cm) tails. All tails sit on outer edges, and you crochet over them during the border, so there is almost nothing to weave in.
Odd rows are lavender sc rows, worked with the WS facing and starting at the spine edge. Even rows are yellow puff rows, worked with the RS facing.
Puff row pattern (odd number of sts): Ch 1, sc in first st, *puff in next st, sc in next st; repeat from * across.
Bottom Arm (Rows 1–3)
Row 1 (WS), A: Ch 14. Sc in 2nd ch from hook and in each ch across. Fasten off. (13 sts)
Row 2 (RS), B: Join in first st. Ch 1, sc in same st, *puff in next st, sc in next st; repeat from * 5 more times. Fasten off. (13 sts: 6 puffs, 7 sc)
Row 3 (WS), A: Join in first st. Ch 1, sc in each st across, working into the top of each puff. Fasten off. (13 sts)
Checkpoint: 2.6 in (6.6 cm) x 0.7 in (1.8 cm).
Lower Spine (Rows 4–6)
Row 4 (RS), B: With RS facing, count 5 sts in from the left (spine) edge of Row 3 and join in the 5th st. Ch 1, sc in same st, puff in next st, sc in next st, puff in next st, sc in last st. Fasten off. (5 sts: 2 puffs, 3 sc)
The 8 unworked sts of Row 3 form the top edge of the bottom arm.
Row 5 (WS), A: Join in first st. Ch 1, sc in each st across. Fasten off. (5 sts)
Row 6 (RS), B: Join in first st. Work the puff row pattern across. Fasten off. (5 sts: 2 puffs, 3 sc)
Checkpoint: 1.5 in (3.8 cm) total height; spine 1.0 in (2.5 cm) wide.
Middle Arm (Rows 7–9)
Row 7 (WS), A: Join in first st at the spine edge. Ch 1, sc in each of the 5 sts, then work 6 fsc. Fasten off. (11 sts: 5 sc + 6 fsc)
Row 8 (RS), B: Join in the last fsc made. Work the puff row pattern across. Fasten off. (11 sts: 5 puffs, 6 sc)
Row 9 (WS), A: Join in first st at the spine edge. Ch 1, sc in each st across. Fasten off. (11 sts)
Checkpoint: 2.2 in (5.6 cm) total height. The middle arm is 2.2 in (5.6 cm) long, which is 2 sts or 0.4 in (1.0 cm) shorter than the bottom arm.
Upper Spine (Rows 10–12)
Row 10 (RS), B: With RS facing, join in the 5th st of Row 9, counting from the spine edge. Work as Row 4. (5 sts)
Row 11 (WS), A: Work as Row 5. (5 sts)
Row 12 (RS), B: Work as Row 6. (5 sts)
Checkpoint: 3.0 in (7.6 cm) total height.
Top Arm (Rows 13–15)
Row 13 (WS), A: Join in first st at the spine edge. Ch 1, sc in each of the 5 sts, then work 8 fsc. Fasten off. (13 sts: 5 sc + 8 fsc)
Row 14 (RS), B: Join in the last fsc made. Work the puff row pattern across. Fasten off. (13 sts: 6 puffs, 7 sc)
Row 15 (WS), A: Join in first st at the spine edge. Ch 1, sc in each st across. Fasten off. (13 sts)
Checkpoint: 3.7 in (9.4 cm) tall x 2.6 in (6.6 cm) wide. The bottom and top arms are the same length, and the middle arm is shorter.
Daisies (make 3)
Round 1, D: Make a magic ring. Ch 1, 8 sc in ring, sl st to first sc. Pull the ring closed. Fasten off. (8 sts)
Round 2, C: Join in any st. *(Ch 2, 2 dc, ch 2, sl st) in next st; repeat from * 7 more times, working the last sl st into the joining st. Fasten off, leaving an 8 in (20.3 cm) tail for sewing. (8 petals)
Each daisy measures about 1.0 in (2.5 cm) across, with a 0.4 in (1.0 cm) center.
Leaves (make 5)
E: Ch 6. Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, sc in next ch, sl st in last ch. Rotate and work along the other side of the chain: sc in next ch, hdc in next ch, sc in next ch, sl st in last ch. Fasten off, leaving a 6 in (15.2 cm) tail. (10 sts)
Each leaf is about 0.6 in (1.5 cm) long, with a pointed tip.
Border
Border gauge: Work 1 sc in each stitch along top and bottom edges. Along row ends, work 1 sc in each sc row end and 2 sc in each puff row end. Outer corners get 3 sc in one stitch. Inner corners get one sc2tog.
In the counts below, the stitches between corners are listed separately from the 3-sc corner groups, so nothing is counted twice.
Round 1, A: With RS facing, join in the 2nd st from the right end of Row 15. Work over all tails as you go.
- Top edge: Ch 1, sc in same st and next 10 sts, 3 sc in last st (top-left corner). (11 + 3 = 14 sts)
- Left edge (spine): Skip the row end of Row 15. Work down the row ends of Rows 14–2: 1 sc in each sc row end (6) and 2 sc in each puff row end (14). (20 sts)
- Bottom edge: Working into the free loops of the foundation chain, 3 sc in first loop (bottom-left corner), sc in next 11 loops, 3 sc in last loop (bottom-right corner). (3 + 11 + 3 = 17 sts)
- Bottom arm end: 2 sc in row end of Row 2, 3 sc in last st of Row 3. (2 + 3 = 5 sts)
- Top of bottom arm: Sc in next 6 sts of Row 3, sc2tog (first leg in next st, second leg in row end of Row 4), sc in same Row 4 row end. (6 + 1 + 1 = 8 sts)
- Lower spine: Sc in row end of Row 5, sc in row end of Row 6, sc2tog (first leg in same Row 6 row end, second leg in base of first fsc of Row 7). (1 + 1 + 1 = 3 sts)
- Underside of middle arm: Sc in base of next 4 fsc, 3 sc in base of last fsc. (4 + 3 = 7 sts)
- Middle arm end: 2 sc in row end of Row 8, 3 sc in last st of Row 9. (2 + 3 = 5 sts)
- Top of middle arm: Sc in next 4 sts, sc2tog (next st and row end of Row 10), sc in same Row 10 row end. (4 + 1 + 1 = 6 sts)
- Upper spine: Sc in row end of Row 11, sc in row end of Row 12, sc2tog (same Row 12 row end and base of first fsc of Row 13). (1 + 1 + 1 = 3 sts)
- Underside of top arm: Sc in base of next 6 fsc, 3 sc in base of last fsc. (6 + 3 = 9 sts)
- Top arm end: 2 sc in row end of Row 14, 3 sc in the first st of Row 15 (top-right corner). (2 + 3 = 5 sts)
Sl st to first sc. Fasten off and weave in. Total: 102 sts.
Check: 14 + 20 + 17 + 5 + 8 + 3 + 7 + 5 + 6 + 3 + 9 + 5 = 102.
Why the math works: Five sc measure 1.0 in (2.5 cm), so 1 sc covers 0.2 in (0.5 cm), which matches the height of a sc row end. A puff row is 0.3 in (0.8 cm) tall and bulky, so working 2 sc there keeps the edge from pulling in around the puffs. The 3-sc corners add the extra length an outer corner needs. Each sc2tog removes the extra at an inner corner, so the corner stays sharp instead of rippling. The single round adds 0.2 in (0.5 cm) on every side: 2.6 + 0.4 = 3.0 in (7.6 cm) wide and 3.7 + 0.4 = 4.1 in (10.4 cm) tall.
Final Blocking
- Spray the letter lightly until it is damp but not soaked.
- Lay it RS up on the blocking mat.
- Pin the outer corners to 3.0 in (7.6 cm) x 4.1 in (10.4 cm).
- Check that the spine is straight and each arm sits at a right angle to it.
- Gently press each puff into a round dome with a fingertip.
- Let the letter dry completely, which takes about 2–3 hours.
- Block the daisies and leaves flat at the same time, opening out each petal.
- Sew on the daisies: one at the top-left corner, one on the spine at the middle arm and one at the bottom inner corner. Use small stitches around each yellow center.
- Sew 2 leaves to the right of the top daisy, 1 above-left and 1 below-right of the middle daisy, and 1 to the right of the bottom daisy.
- Open a jump ring, pass it through the border sts at the top of the spine, add the chain and close the ring. Join the chain to the split ring with the second jump ring.
Final Quality-Control Checklist
- The letter measures 3.0 in (7.6 cm) x 4.1 in (10.4 cm).
- The border has 102 sts in total.
- The bottom and top arms are 13 sts; the middle arm is 11 sts.
- Each puff row shows a clear line of yellow bumps.
- Inner corners are crisp, with no gaps.
- No tails show along any edge.
- All 3 daisies and 5 leaves are sewn flat, with no loose petals.
- The jump rings are fully closed and the key ring holds firmly.
Troubleshooting
Puffs look flat or lean. Pull every loop up to the same height before the final yo.
Spine edge looks wavy. Work the border round with a 3.25 mm hook.
Border cups or pulls in. Use a hook 0.25 mm larger for the border round only.
Inner corner gapes. Tighten the sc2tog, or sew one small stitch across the gap with A.
Middle arm is too long. Recount Row 7. It needs exactly 6 fsc.
Daisy petals curl. Pin the daisies flat and block them before sewing.
Care
Hand wash in cool water with mild soap, press the water out in a towel and dry flat. Take off the metal ring first if it is not stainless.

Final Notes
Rows 1–3 set the width at 2.6 in (6.6 cm). Each 3-row block adds 0.7 in (1.8 cm) for an arm or 0.8 in (2.0 cm) for a spine section, for a total of 3.7 in (9.4 cm). One border round adds 0.2 in (0.5 cm) on each side, giving a finished letter of 3.0 in (7.6 cm) x 4.1 in (10.4 cm). Measure at each checkpoint, and the daisies will sit exactly where they should.
Happy crocheting!