This hanging holder keeps three spare rolls on the wall where you can grab them. It has three round baskets with an open diamond lattice, sewn onto a long, narrow back panel. A wooden ring hangs it from a hook, and a green tassel finishes the bottom tip.
The colors are emerald green with a cream rim on each basket. The rims are worked in a crunch stitch, which gives them a bumpy, rope-like texture against the smooth green lattice. The style is clean and slightly boho, and it goes well with natural wood or brass bathroom fittings.
The pattern uses US crochet terms. Each basket measures 5 1/4 in (13.3 cm) across and about 4 in (10.2 cm) tall. The back panel is 4 in (10.2 cm) wide with its border and hangs about 24.6 in (62.5 cm) long. With the ring and tassel added, the holder is about 30 in (76.2 cm) from top to bottom.
Each basket starts as a flat double crochet circle. One back-loop round turns the edge up, a chain-5 lattice builds the wall, and a cream crunch rim finishes the top. The back panel is worked in single crochet rows, tapered at both ends, and edged with one round. To finish, you sew the baskets on, fold the tab around the ring, and attach the tassel.
Finished Size and Construction
- Finished size: about 4 in (10.2 cm) x 24.6 in (62.5 cm) hanging panel; about 30 in (76.2 cm) overall with ring and tassel
- Skill level: Easy to Intermediate
- Terminology: US terms
- Yarn weight: Worsted (#4) cotton
- Hook: 5.0 mm (US H-8)
- Number of pieces: 5 (3 baskets, 1 back panel, 1 tassel), plus a wooden ring
- Layout: 3 baskets stacked in 1 vertical column, centered on the panel
- Basket size: 5 1/4 in (13.3 cm) diameter x about 4 in (10.2 cm) tall
- Panel size before border: about 3.4 in (8.6 cm) x 26 in (66.0 cm), laid flat
- Border depth: 1 round of sc, about 0.3 in (0.8 cm)
Materials
Use a smooth worsted-weight cotton or cotton blend. Cotton holds the basket shape well and won’t stretch under the weight of the rolls. Acrylic also works, but the baskets will be softer.
- Emerald green: 150 g, about 255 m (279 yd), for the baskets, panel, border and tassel
- Cream: 50 g, about 85 m (93 yd), for the basket rims
These amounts include a comfortable margin for a gauge swatch and for trimming the tassel.
Tools:
- 5.0 mm (US H-8) crochet hook
- Wooden ring, 2 1/2 in (6.4 cm) outer diameter
- Tapestry needle
- 4 locking stitch markers
- Stiff card, 3 1/2 in (8.9 cm) tall, for the tassel
- Scissors and tape measure
- Rust-proof pins and a blocking surface
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sc2tog: single crochet 2 together
- tbl: through the back loop only
- st(s): stitch(es)
- RS / WS: right side / wrong side
Special stitch: crunch pattern. Alternate a sl st and an hdc. On the next round, work an hdc into each sl st and a sl st into each hdc. This offset creates the bumpy cream texture.
Gauge and Checkpoints
Gauge: 14 sc and 14 rows = 4 in (10.2 cm) square. 14 dc = 4 in (10.2 cm) across.
Test one piece first. Make one basket base (Rounds 1–5) before you start anything else. It uses the same stitches as the finished holder, so it’s the most useful gauge check.
Checkpoints:
- After base Round 5, the circle measures 5 1/4 in (13.3 cm) across.
- After Round 12, the lattice is about 2.4 in (6.1 cm) tall.
- A finished basket is about 4 in (10.2 cm) tall, with a rim of about 1.1 in (2.8 cm).
- After Row 72, the panel is about 20.6 in (52.3 cm) long and 3.4 in (8.6 cm) wide.
If your piece is too big, go down one hook size (4.5 mm). If it’s too small, go up one size (5.5 mm). A basket that comes out too tight may not fit a standard roll, so slightly large is the safer side to miss on.

Basket (Make 3)
Base
With green, make a magic ring.
Round 1: Ch 2 (does not count as a st), 12 dc in ring. Join with sl st to first dc. (12 sts)
Round 2: Ch 2, 2 dc in each st around. Join. (24 sts)
Round 3: Ch 2, dc in next st, 2 dc in next st; repeat from * around. Join. (36 sts)
Round 4: Ch 2, dc in next 2 sts, 2 dc in next st; repeat around. Join. (48 sts)
Round 5: Ch 2, dc in next 3 sts, 2 dc in next st; repeat around. Join. (60 sts)
Checkpoint: the circle is 5 1/4 in (13.3 cm) across and lies flat, with no ruffling or cupping.
Turning Round
Round 6: Ch 1, sc tbl in each st around. Join. (60 sts: 60 worked 1-per-existing-stitch + 0 added)
The unworked front loops leave a ridge on the outside, and the wall now rises straight up from this edge.
Lattice Sides
Round 7: Ch 1, sc in first st, ch 5, skip 3 sts, sc in next st; repeat from * 13 more times, ch 5, skip last 3 sts, join with sl st to first sc. (15 ch-5 loops)
Check: 60 sts ÷ 4 sts per repeat = 15 loops.
Round 8: Sl st in each of the first 3 ch of the first loop, ch 1, sc in same loop, ch 5, sc in next ch-5 loop; repeat from * 13 more times, ch 5, join with sl st to first sc. (15 ch-5 loops)
Each new sc sits at the center of a loop below, which forms the diamond shapes.
Rounds 9–12: Repeat Round 8. (15 ch-5 loops per round)
Checkpoint: the lattice is about 2.4 in (6.1 cm) tall. Keep the chains relaxed, or the wall will pull inward.
Round 13: Ch 1, 4 sc in each ch-5 loop around. Join. (60 sts: 15 loops x 4 sc + 0 added)
Fasten off green.
Cream Crunch Rim
Round 14: Join cream in any st. Ch 1, sc in each st around. Join. (60 sts)
Round 15: Ch 1, sl st in next st, hdc in next st; repeat around. Join. (60 sts: 30 sl st + 30 hdc)
Round 16: Ch 1, hdc in next sl st, sl st in next hdc; repeat around. Join. (60 sts: 30 hdc + 30 sl st)
Round 17: Ch 1, sc in each st around. Join. (60 sts)
Fasten off and leave a 24 in (61.0 cm) cream tail for sewing. Weave in the green tails.
Checkpoint: the basket is about 4 in (10.2 cm) tall and the rim is about 1.1 in (2.8 cm) deep. A standard roll should drop in easily and stick up about 1 in (2.5 cm) above the rim.
Back Panel (Make 1)
You work the panel from the bottom tip upward in sc rows. The ch 1 at the start of each row does not count as a stitch.
Bottom Taper
Row 1 (RS): With green, ch 5, sc in 2nd ch from hook and in each ch across. Turn. (4 sts)
Row 2: Ch 1, 2 sc in first st, sc to last st, 2 sc in last st. Turn. (6 sts)
Row 3: Ch 1, sc in each st across. Turn. (6 sts)
Row 4: Repeat Row 2. (8 sts)
Row 5: Repeat Row 3. (8 sts)
Row 6: Repeat Row 2. (10 sts)
Row 7: Repeat Row 3. (10 sts)
Row 8: Repeat Row 2. (12 sts)
Row 9: Repeat Row 3. (12 sts)
Body
Rows 10–72: Ch 1, sc in each st across. Turn. (12 sts per row; 63 rows)
Checkpoint: the body section measures 18 in (45.7 cm), and the whole panel so far is about 20.6 in (52.3 cm).
Top Taper
Row 73: Ch 1, sc2tog, sc to last 2 sts, sc2tog. Turn. (10 sts)
Row 74: Ch 1, sc in each st across. Turn. (10 sts)
Row 75: Repeat Row 73. (8 sts)
Row 76: Repeat Row 74. (8 sts)
Row 77: Repeat Row 73. (6 sts)
Row 78: Repeat Row 74. (6 sts)
Row 79: Repeat Row 73. (4 sts)
Row 80: Repeat Row 74. (4 sts)
Hanging Tab
Rows 81–91: Ch 1, sc in each st across. Turn. (4 sts per row; 11 rows)
Don’t fasten off. Go straight on to the border.
Checkpoint: 91 rows ÷ 3.5 rows per inch = 26 in (66.0 cm) long. The body is about 3.4 in (8.6 cm) wide.
Border
Border gauge: 1 sc in each row end and 1 sc in each stitch. The gauge is square (14 sts and 14 rows = 4 in / 10.2 cm), so 1 sc per row end matches 1 sc per stitch and the edges stay flat.
Corners: The 4 corners are the two ends of Row 91 and the two ends of Row 1. Each corner gets 3 sc in the corner stitch. Those 3 sc belong to the corner, not to a side, so the side counts below are only the stitches between corner groups.
Round 1: Ch 1 and turn the panel to work along the top edge.
- Top edge (Row 91): 3 sc in first st (corner), sc in next 2 sts, 3 sc in last st (corner). (2 sts between corners)
- Left long side: sc in the row end of each row from Row 90 down to Row 2. (89 sts)
- Bottom edge (Row 1): 3 sc in first foundation ch (corner), sc in next 2 ch, 3 sc in last ch (corner). (2 sts between corners)
- Right long side: sc in the row end of each row from Row 2 up to Row 90. (89 sts)
Join with sl st to first sc and fasten off.
Total: 2 + 89 + 2 + 89 = 182 side sts, plus 4 corners x 3 sc = 12. (194 sts)
Why the math works: Rows 1 and 91 form the top and bottom edges, which leaves 91 − 2 = 89 row ends on each long side, including the tapered sections. The body is 12 sts (3.4 in / 8.6 cm) wide. One sc on each edge adds about 0.3 in (0.8 cm) per side, so the bordered body is 4 in (10.2 cm) wide. The tab becomes about 1.7 in (4.3 cm) wide, and the panel is about 26.6 in (67.6 cm) long laid flat.
Tassel (Make 1)
Wrap green 25 times around the 3 1/2 in (8.9 cm) card. Tie the top with a 10 in (25.4 cm) strand. Slide the wraps off the card. Wind a second strand 6 times around the bundle, 1/2 in (1.3 cm) below the top, and knot it. Cut the bottom loops and trim the tassel to 3 in (7.6 cm). Keep the tie tails for attaching.
Joining
Method: Whipstitch, using the cream tail at the rim and a separate green strand at the base. Work on the RS of the panel.
Mark the rows. Counting from the bottom tip, place markers at Rows 15, 28, 34, 47, 53 and 66. Each basket covers 14 rows (4 in / 10.2 cm), with 5-row gaps (about 1.5 in / 3.8 cm) between baskets.
- Bottom basket: Rows 15–28
- Middle basket: Rows 34–47
- Top basket: Rows 53–66
Stitch-to-stitch logic: Turn the basket so its joining seams face the panel. Mark 12 stitches in a row at the back of Round 6 (the ridge) and the 12 stitches directly above them in Round 17. The panel body is 12 sts wide, so you sew 12 basket sts to 12 panel sts, one to one. Don’t sew into the border stitches.
- Whipstitch the 12 marked Round 6 sts across the panel at the lower marked row (for example, Row 15).
- Whipstitch the 12 marked Round 17 sts across the panel at the upper marked row (for example, Row 28).
- Tack the center of the lattice to the panel at Rounds 9 and 11, using 2 small stitches each.
Tension: Pull each stitch just snug. Too much pull puckers the panel across its width and flattens the back of the basket. Check from the front that the basket stays round.
Ring: Fold the top 7 rows of the tab (2 in / 5.1 cm) over the wooden ring to the WS. Whipstitch the edge of Row 91 to the WS at Row 84.
Tassel: Thread the tassel ties through the bottom border at the center of Row 1. Knot them on the WS and weave in the ends.
Size checkpoint: The panel hangs about 24.6 in (62.5 cm) from the bottom tip to the top of the fold, or about 30 in (76.2 cm) overall with ring and tassel.
Final Blocking
- Weave in all remaining ends, keeping them inside the panel stitches.
- Mist the holder with water until it is damp but not soaked.
- Lay the panel flat, RS up, and pin the body to 4 in (10.2 cm) wide.
- Put a toilet roll or rolled towel in each basket to set its round shape.
- Gently ease the lattice diamonds open with your fingers so they are even.
- Let it dry fully, about 24 hours, before you unpin it and hang it.
Final Quality-Control Checklist
- Each base has 60 sts and measures 5 1/4 in (13.3 cm).
- Every lattice round has 15 loops.
- Each rim has 60 sts, and the crunch texture is offset on Round 16.
- The panel has 91 rows, with 12 sts across the body.
- The border has 194 sts, with 3 sc in each corner.
- The baskets sit at Rows 15–28, 34–47 and 53–66.
- The ring is sewn in securely and the tassel is centered.
Troubleshooting
- Base cups upward: Your dc are too tight or you missed an increase. Recount: each round should end on a multiple of 12.
- Base ruffles: Your tension is loose. Use a hook one size smaller for the base only.
- Lattice loops slant: Make sure each sc goes into the center of the loop, after the 3 sl sts.
- Rim flares out: Work Rounds 14–17 with a 4.5 mm hook.
- Panel edges wave: Redo the border round with a 4.5 mm hook, keeping the 194-st count.
- Holder twists on the wall: Re-center the tab fold so the ring sits straight above the panel.
Care
Hand wash in cool water with mild soap, reshape the baskets while damp, and lay flat to dry. Do not tumble dry.

Final Notes
Here is how the measurements fit together. A 60-st base of 5 1/4 in (13.3 cm) carries 15 lattice loops and a 60-st cream rim, which makes a basket about 4 in (10.2 cm) tall. The 12-st panel grows to 4 in (10.2 cm) wide with a single 194-st sc border. Each basket covers 14 rows with 5-row gaps between them, and the folded tab sets the hanging length at about 24.6 in (62.5 cm). If you hit each checkpoint, the holder will hang straight and hold three rolls neatly.
Happy crocheting!