Evergreen Fan Christmas Tree Ornament Crochet Pattern

This little tree is built from six fan-shaped shells stacked three, two, and one. Small eyelets sit between the rows, and a short brown trunk and a chain hanging loop finish it off. It’s quick to make, it uses very little yarn, and it looks lovely on a real branch.

The sample uses a deep teal green for the tree and a warm cinnamon brown for the trunk. The style is simple and textured, and the shells give a soft, layered look that reads clearly as a tree from across the room.

The pattern uses US crochet terms. The finished ornament measures 3.6 in (9.1 cm) wide and 3.6 in (9.1 cm) tall from trunk to tree tip. The hanging loop adds 2.0 in (5.1 cm), for a total hanging length of 5.6 in (14.2 cm).

Construction is all one piece. You work the tree flat in turned rows from the bottom up: a chain-space foundation, then rows of shells and rows of chain loops. A single round of single crochet outlines the tree and makes the hanging loop at the tip. Then you work the trunk in rows directly off the bottom edge, so there’s nothing to sew.

Finished Size and Construction

  • Finished size: 3.6 in (9.1 cm) wide × 3.6 in (9.1 cm) tall, plus a 2.0 in (5.1 cm) loop
  • Skill level: Easy (advanced beginner)
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4), cotton or cotton blend
  • Hook: 4.0 mm (US G-6)
  • Number of pieces: 1 (tree, border, and trunk all worked in one piece)
  • Layout: Shells stacked 3, 2, 1, with trunk centered below
  • Tree size before border: 3.2 in (8.1 cm) wide × 2.2 in (5.6 cm) tall
  • Border depth: 0.2 in (0.5 cm) on every edge
  • Tree size after border: 3.6 in (9.1 cm) wide × 2.6 in (6.6 cm) tall
  • Trunk: 0.7 in (1.8 cm) wide × 1.0 in (2.5 cm) tall

Materials

Pick a smooth worsted-weight cotton or cotton blend. Cotton shows the shells clearly and holds a crisp outline after blocking. Fuzzy or very splitty yarns will blur the eyelets.

  • Color A, deep teal green (tree, border, loop): 10 g, about 20 m (22 yd)
  • Color B, warm brown (trunk): 3 g, about 6 m (7 yd)

Both quantities include a margin for a gauge swatch and weaving in ends. One ornament actually uses about 7 g of teal and 2 g of brown.

Tools:

  • 4.0 mm (US G-6) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch marker (optional)
  • Blocking mat and rustproof pins
  • Spray bottle with water

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • RS / WS – right side / wrong side

Special stitch – Shell: work 7 dc into the same stitch or space. The 4th dc is the center dc. Dc 1–3 sit to one side of it, and dc 5–7 sit to the other side.

Gauge and Checkpoints

Base gauge: 18 sc and 20 rows = 4 in (10.2 cm) in sc. That makes 1 sc about 0.22 in (0.6 cm) wide.

Shell gauge: one Row 2 shell, including the sc on either side, measures about 1.1 in (2.8 cm) wide.

Because the ornament is so small, it works as its own swatch. Make one full tree first and check it at these points:

  • After Row 1: the foundation is 2.9 in (7.4 cm) long.
  • After Row 2: the piece is 3.2 in (8.1 cm) wide × 0.8 in (2.0 cm) tall.
  • After Row 4: the piece is 1.5 in (3.8 cm) tall.
  • After Row 6: the piece is 3.2 in (8.1 cm) wide × 2.2 in (5.6 cm) tall.
  • After the border: the piece is 3.6 in (9.1 cm) wide × 2.6 in (6.6 cm) tall.
  • After the trunk: the ornament is 3.6 in (9.1 cm) tall, not counting the loop.

Too big? Go down to a 3.75 mm (US F-5) hook, or work the dc a little shorter. Too small? Go up to a 4.5 mm (US 7) hook. Shells that cup or ruffle point to tension, not to the stitch counts. Change the hook before you change any numbers.

Crocheted teal Christmas tree ornament with brown trunk and hanging cord, displayed on wood.

Tree Body

Work in turned rows with Color A. The ch 1 at the start of a row never counts as a stitch.

Foundation: With Color A, ch 14.

Row 1 (RS): Sc in the 2nd ch from the hook. Ch 3, sk 3 ch, sc in next ch. Repeat from * to * 2 more times.
Count: 4 sc and 3 ch-3 sps. (13 foundation ch used: 1 + 3 × 4 = 13.)

Row 2 (shell row, 3 shells): Ch 1, turn. Sc in the first sc. Shell in the next ch-3 sp, sc in the next sc. Repeat from * to * 2 more times.
Count: 3 shells (21 dc) + 4 sc = 25 sts.

Row 3 (loop row): Ch 1, turn. Sl st in the first sc and in the next 3 dc (4 sl sts). Sc in the next dc, which is the center dc of the first shell. Ch 4, sk 3 dc, sk 1 sc, sk 3 dc, sc in the center dc of the next shell. Repeat from * to * once more. Leave the last 3 dc and the last sc unworked.
Count: 3 sc and 2 ch-4 sps (plus 4 sl sts).

Each ch-4 arch spans the gap between two shell tops. The small opening under each arch becomes one of the tree’s eyelets.

Row 4 (shell row, 2 shells): Ch 1, turn. Sc in the first sc. Shell in the next ch-4 sp, sc in the next sc. Repeat from * to * once more.
Count: 2 shells (14 dc) + 3 sc = 17 sts.

Row 5 (loop row): Ch 1, turn. Sl st in the first sc and in the next 3 dc (4 sl sts). Sc in the center dc of the first shell. Ch 4, sk 3 dc, sk 1 sc, sk 3 dc, sc in the center dc of the next shell. Leave the last 3 dc and the last sc unworked.
Count: 2 sc and 1 ch-4 sp (plus 4 sl sts).

Row 6 (top shell): Ch 1, turn. Sc in the first sc, shell in the ch-4 sp, sc in the last sc.
Count: 1 shell (7 dc) + 2 sc = 9 sts.

Fasten off and weave in the starting tail. Check the size: 3.2 in (8.1 cm) wide × 2.2 in (5.6 cm) tall.

Each shell row steps in by exactly half a shell on both sides. That’s why the outline forms a clean triangle. One side of the tree is the slip-stitch side, where the sl sts of Rows 3 and 5 lie. The other side is the open side, where the 4 unworked stitches of Rows 2 and 4 stay free.

Border

The border is one round of sc in Color A. It gives the shells a smooth, defined outline and makes the hanging loop at the tip.

Border gauge: 4 border sc ≈ 0.9 in (2.3 cm). The border adds 0.2 in (0.5 cm) to every edge.

Round 1: With the RS facing, join Color A with a sl st in the first sl st of Row 3 on the slip-stitch side, at the bottom of the tree. Ch 1.

  1. Slip-stitch slope (12 sc): Sc in the same st and in the next 3 sl sts (4 sc on the Row 2 shell). Sc in each of the 4 sl sts of Row 5 (4 sc on the Row 4 shell). Sc in the first sc of Row 6 and in the next 3 dc (4 sc on the top shell).
  2. Tip: In the center dc of the top shell, work (sc, ch 16, sc). The ch-16 is the hanging loop.
  3. Open slope (12 sc): Sc in the next 3 dc and the last sc of Row 6 (4 sc). Sc in the 3 unworked dc and the unworked sc at the end of Row 4 (4 sc). Sc in the 3 unworked dc and the unworked sc at the end of Row 2 (4 sc).
  4. Bottom edge (15 sc): Rotate to work along the bottom. Sc in the side of the Row 1 sc (corner). Sc in the free loop of each of the 13 foundation ch. Sc in the side of the Row 1 sc at the other end (corner).

Join with a sl st to the first sc. Fasten off and weave in the end.

Count: 12 + 2 + 12 + 15 = 41 sc, plus the ch-16 loop.

Why the math works: Each shell row exposes exactly 4 edge stitches on each side: the sc plus 3 dc on one side, and 3 dc plus the sc on the other. Three shell rows × 4 = 12 sc per slope, so both slopes match. The bottom edge has one sc per foundation chain (13) plus one corner sc at each end, for 15. The tip sc’s sit in a single stitch, so the point stays sharp and doesn’t flare.

Trunk

The trunk is worked in rows straight off the center of the bottom border with Color B. Of the 15 bottom sc, the middle three are sc 7, 8, and 9, which leaves 6 sc free on each side.

Row 1: With the WS facing and the tree upside down, join Color B with a sl st in bottom border sc 7. Ch 1, sc in the same st and in the next 2 sts.
Count: 3 sc.

Rows 2–5: Ch 1, turn, sc in each sc across.
Count: 3 sc in every row.

Fasten off. Weave in the tail along the side of the trunk so it doesn’t show.

The trunk measures 0.7 in (1.8 cm) wide × 1.0 in (2.5 cm) tall. The whole ornament now measures 3.6 in (9.1 cm) tall from the bottom of the trunk to the tip of the tree.

Final Blocking

  1. Weave in all the ends before you block. Leave the tails uncut until the piece is dry.
  2. Lightly mist the ornament until it’s damp, not soaked.
  3. Pin it RS up on a blocking mat to 3.6 in (9.1 cm) across the widest point of the tree.
  4. Pin the tip so the tree measures 2.6 in (6.6 cm) tall, not counting the trunk.
  5. Ease each shell into an even fan and pin out each slope as a straight line.
  6. Pin the trunk straight, centered under the middle of the tree, at 0.7 in (1.8 cm) wide.
  7. Lay the hanging loop flat and straight above the tip.
  8. Let it dry completely, then unpin it and trim the ends.

Final Quality-Control Checklist

  • Row counts are 25, 17, and 9 sts on the three shell rows.
  • Every shell has exactly 7 dc and a clear center dc.
  • There are two eyelets, one under each ch-4 arch.
  • The border has 12 sc on each slope and 15 sc on the bottom.
  • The trunk is 3 sc wide, centered on bottom sc 7–9, and 5 rows tall.
  • The hanging loop sits right above the tip and doesn’t twist.
  • The ornament measures 3.6 in (9.1 cm) wide × 3.6 in (9.1 cm) tall.
  • No tails show on the RS.

Troubleshooting

The shells ruffle or cup. Your dc are too loose for the space. Go down a hook size, or work the shells a little more firmly.

The shells look pinched and narrow. Your ch-3 or ch-4 spaces are too tight. Loosen your chains a little, or go up a hook size for the chain rows only.

One slope is longer than the other. Count the border stitches again. Each slope must have exactly 12 sc, 4 per shell row.

The trunk is off-center. Count the bottom sc from the corner. The trunk starts in sc 7, so 6 sc stay free on each side.

The tip is rounded instead of pointed. Work both tip sc’s and the loop into the single center dc, not into neighboring stitches.

The loop twists. Make sure the chain isn’t twisted before you work the second tip sc. Steam or mist it flat while blocking.

Care

Hand wash in cool water, press out the water in a towel, and dry the ornament flat, re-shaping it as needed. Store it flat or hang it so the shells keep their shape.

Teal crocheted Christmas tree ornament with tan trunk hanging on evergreen branch against warm golden holiday lights.

Final Notes

The measurement chain is short and easy to check. The 13-chain foundation is 2.9 in (7.4 cm) long. Three shells make a 3.2 in (8.1 cm) bottom row. Six rows of shells and loops bring the tree to 2.2 in (5.6 cm) tall. The border adds 0.2 in (0.5 cm) on every edge, for 3.6 in (9.1 cm) × 2.6 in (6.6 cm). The 1.0 in (2.5 cm) trunk brings the ornament to 3.6 in (9.1 cm) tall, and the 2.0 in (5.1 cm) loop gives a hanging length of 5.6 in (14.2 cm).

Once your first tree matches these checkpoints, every tree after it will too. Try a few in different greens, or give them away as gift-wrap toppers.

Happy crocheting!

Leave a Comment