Scarlet Fan Three-Tier Hanging Basket Crochet Pattern

The Scarlet Fan Hanging Basket is a three-tier organizer made of lacy red and black baskets stacked on black straps and hung from a wooden ring. Each basket holds one standard toilet paper roll. It also works well for small towels, soaps, or other bathroom items.

There are two colors. Black is used for the solid base, the chain arches and the treble spokes. Red is used for the fans and the scalloped rim. Because the colors alternate, the side reads as layers of open fans, which keeps the baskets light without making them flimsy.

This pattern uses US crochet terms. Each basket is about 5 in (12.7 cm) across the base, 3.5 in (8.9 cm) tall, and about 6.5 in (16.5 cm) across the scalloped rim. The organizer hangs about 26.5 in (67.3 cm) from the top of the ring to the base of the bottom basket.

Construction is simple. You crochet a flat circular base and turn it up into a side with a back-loop round. You then work alternating fan and arch rounds and finish with a scalloped rim. After that, you make four straps (one pair starts around the ring) and sew everything together.

Finished Size and Construction

  • Finished size: about 26.5 in (67.3 cm) hanging length.
  • Basket size: 5 in (12.7 cm) base, 3.5 in (8.9 cm) tall, 6.5 in (16.5 cm) across the rim.
  • Skill level: Intermediate.
  • Terminology: US terms.
  • Yarn weight: Worsted (#4) cotton.
  • Hook: 4.0 mm (G-6).
  • Number of pieces: 3 baskets, 2 long straps, 2 short straps, 1 wooden ring.
  • Layout: 3 baskets stacked vertically, with a 3 in (7.6 cm) gap between them.
  • Height before rim border: about 2.75 in (7.0 cm), after Round 17.
  • Rim border depth: about 0.75 in (1.9 cm), Rounds 18–19.

Materials

Use 100% cotton or a cotton blend for this basket. Cotton holds its shape, doesn’t stretch much under weight, and can be washed. Acrylic will work, but the baskets will be softer.

  • Black: 100 g (about 170 m), for the bases, arches and straps.
  • Red: 100 g (about 170 m), for the fans and rims.

These amounts assume about 85 m per 50 g ball and include a margin of about 25%.

Tools:
– 4.0 mm (G-6) crochet hook
– Wooden ring, 2 in (5.1 cm) outer diameter
– Yarn needle
– 4 locking stitch markers
– Measuring tape
– Pins and a 4.5 in (11.4 cm) wide jar or can for blocking

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • dc: double crochet
  • tr: treble crochet (yarn over twice, insert, pull up a loop, [yarn over, pull through 2] 3 times)
  • BLO: back loop only
  • sp: space
  • st(s): stitch(es)

Special stitch – Fan: work the stated number of dc into one stitch. A 7-dc fan is used on the sides and a 9-dc fan on the rim. The center dc of a 7-dc fan is the 4th dc, and the center dc of a 9-dc fan is the 5th dc.

Gauge and Checkpoints

Gauge is 18 sc and 20 rounds = 4 in (10.2 cm) in sc, using a 4.0 mm hook.

Finish one complete basket before you start the others. Measure it at each of these checkpoints:

  • After Round 6: the base is 2.5 in (6.4 cm) across.
  • After Round 12: the base is 5 in (12.7 cm) across and lies flat.
  • After Round 15: the side is about 1.5 in (3.8 cm) tall, measured from the base ridge.
  • After Round 17: the side is about 2.75 in (7.0 cm) tall.
  • After Round 19: the basket is about 3.5 in (8.9 cm) tall and 6.5 in (16.5 cm) across the rim.

If the base is too big, go down to a 3.75 mm hook. If it is too small, go up to a 4.5 mm hook. A standard roll is about 4.5 in (11.4 cm) wide, so the base must be at least 4.75 in (12.1 cm) across for the roll to fit. If the base ruffles, your tension is too loose, so go down a hook size. If it cups, go up a hook size.

Intricate crocheted lace edging with red and black scalloped fan pattern on rustic wooden surface.

Basket (Make 3)

Base

Use black.

Round 1: Make a magic ring and ch 1. Work 6 sc into the ring and join with sl st to the first sc. (6 sts)

Round 2: Ch 1, then work 2 sc in each st around, and join. (12 sts)

Round 3: Ch 1, sc in next st, 2 sc in next st; repeat 6 times, and join. (18 sts)

Round 4: Ch 1, sc in next 2 sts, 2 sc in next st; repeat 6 times, and join. (24 sts)

Rounds 5–12: Continue the same way, working 1 more sc between increases in each round. Ch 1 at the start of each round and join at the end.

  • Round 5: 30 sts
  • Round 6: 36 sts (checkpoint: 2.5 in / 6.4 cm)
  • Round 7: 42 sts
  • Round 8: 48 sts
  • Round 9: 54 sts
  • Round 10: 60 sts
  • Round 11: 66 sts
  • Round 12: 72 sts (checkpoint: 5 in / 12.7 cm)

To keep the circle round instead of hexagonal, stagger the increases. On even rounds, work half the plain sc first, then the increase, then the rest of the plain sc.

Side

Round 13 (black): Ch 1. Working in BLO, sc in each st around, then join. (72 sts)

This round creates the black ridge where the side turns up. Fasten off black.

The side is worked in repeats of 6 sts, and 72 ÷ 6 = 12 repeats.

Round 14 (red): Join red with sl st in any st. Ch 1 and sc in the same st. Skip 2 sts, work 7 dc in next st (fan), skip 2 sts, sc in next st. Repeat from * 10 more times. Then skip 2 sts, work 7 dc in next st, skip 2 sts, and join to the first sc.

This round has 96 sts: 12 fans (84 dc) and 12 sc. Fasten off red.

Round 15 (black): Join black with sc in the center (4th) dc of any fan. Ch 3, tr in next sc, ch 3, sc in center dc of next fan. Repeat from * around. On the last repeat, finish with ch 3, tr in last sc, ch 3, and join to the first sc.

This round has 12 sc, 12 tr and 24 ch-3 sps. The tr make the black spokes and the ch-3 sps make the black arches. Fasten off black.

Round 16 (red): Join red with sl st in any tr. Ch 3 (counts as dc) and work 6 dc in the same tr. Sc in next sc, 7 dc in next tr. Repeat from * 10 more times. Then sc in last sc and join to the top of ch-3.

This round has 96 sts: 12 fans (84 dc) and 12 sc. Skip the ch-3 sps entirely; they stay open as lace windows behind the fans. Fasten off red.

Round 17 (black): Work as for Round 15. (12 sc, 12 tr and 24 ch-3 sps)

Checkpoint: the side should be about 2.75 in (7.0 cm) tall. Fasten off black.

Rim Border (Rounds 18–19)

Border gauge: each finished scallop is about 1.7 in (4.3 cm) wide and 0.75 in (1.9 cm) deep.

Round 18 (red, rim fans): Join red with sl st in any tr. Ch 3 (counts as dc) and work 8 dc in the same tr. Sc in next sc, 9 dc in next tr. Repeat from * 10 more times. Then sc in last sc and join to the top of ch-3.

This round has 120 sts: 12 fans (108 dc) and 12 sc.

Round 19 (red, scallop edging): Ch 1. Sc in the first 4 dc of the fan, 3 sc in the center (5th) dc, sc in the next 4 dc, sl st in the next sc. Repeat from * 12 times, then join to the first sc.

Each scallop has 12 sts: 11 sc and 1 sl st. That makes 144 sts in total, worked as follows:

  • 120 sts worked into each existing st
  • plus 24 extra sts (2 extra at each of the 12 scallop centers)

Fasten off and weave in all ends.

Why the math works: the base ends on 72 sts, which divides evenly into 12 six-stitch repeats. Every side round keeps exactly 12 repeats, so each fan sits above a tr from the round below and each sc sits above a fan center. The repeats never shift. The 9-dc rim fans are wider than the 7-dc side fans, which gives the rim its gentle flare. The 3 sc in each center dc of Round 19 shape a soft point on each scallop, while the sl st between scallops keeps the gap between them deep.

Straps

Use black.

Long Strap (Make 2)

Round 1:
1. Ch 8. Pass the chain through the wooden ring, then sl st in the first ch. This forms Loop A around the ring.
2. Ch 65 for the strap body.
3. Ch 8, then sl st in the 8th ch from the hook to form Loop B.

Round 2:
1. Ch 1 and work 12 sc into Loop B.
2. Sc in the back bump of each of the 65 body ch.
3. Work 12 sc into Loop A, over the ring.
4. Sc in the remaining top loop of each of the 65 body ch.
5. Join to the first sc.

Round 2 has 154 sts: 12 + 65 + 12 + 65.

The body is about 14.5 in (36.8 cm) long and 0.4 in (1.0 cm) wide. Fasten off.

Short Strap (Make 2)

Round 1: Ch 8 and sl st in the first ch (Loop A). Ch 29. Then ch 8 and sl st in the 8th ch from the hook (Loop B).

Round 2: Work as for the long strap, using 29 body ch on each side. Round 2 has 82 sts: 12 + 29 + 12 + 29.

The body is about 6.5 in (16.5 cm) long. Fasten off.

Make All Pieces

  • Baskets: 3, each using about 20 g black and 20 g red.
  • Long straps: 2, black, about 6 g each.
  • Short straps: 2, black, about 3 g each.

Layout (front view):

            [ring]
            /    \
          L1      L2        long straps
     [ Basket 1 (top) ]
          |        |        3 in (7.6 cm) gap
     [ Basket 2 (mid) ]
          S1      S2        short straps
     [ Basket 3 (bottom) ]

Joining

Method: sew the straps to the outside of the baskets with whipstitch, using black yarn and a yarn needle.

Marking: on each basket, place a marker at the center sc of scallop 1 and another at the center sc of scallop 7. These two points are exactly 6 scallops apart, so they sit directly opposite each other.

Long straps (ring → top basket → middle basket):

  1. Measure 8 in (20.3 cm) down from the ring. At that point, lay the strap over the rim of the top basket at the scallop 1 marker.
  2. Whipstitch the strap to the rim through Round 19, using 4 stitches.
  3. Run the strap straight down the outside of the basket. Whipstitch it to the Round 13 ridge with 4 stitches, working stitch-to-stitch so the strap is anchored into 2 ridge sc.
  4. Leave a 3 in (7.6 cm) gap below the top basket.
  5. Sew Loop B flat over the rim of the middle basket at the scallop 1 marker.
  6. Repeat steps 1–5 with the second long strap at the scallop 7 markers.

Short straps (middle basket → bottom basket):

  1. Sew Loop A of a short strap over the middle rim, on top of the long strap’s Loop B at the scallop 1 marker.
  2. Run the strap down the middle basket and anchor it at Round 13, the same way as the long straps.
  3. Leave a 3 in (7.6 cm) gap, then sew Loop B to the bottom basket’s rim at the scallop 1 marker.
  4. Repeat with the second short strap at the scallop 7 markers.

Tension: keep the straps straight and relaxed, without stretching them while you sew. Hang the organizer from a hook before you sew the second strap of each pair, and check that every basket hangs level.

Size checkpoint: the total length should be about 26.5 in (67.3 cm):

  • 2 in (5.1 cm) for the ring
  • 8 in (20.3 cm) from the ring to the top rim
  • 3 baskets at 3.5 in (8.9 cm) each
  • 2 gaps at 3 in (7.6 cm) each

Final Blocking

  1. Soak each basket in cool water for 10 minutes, then press out the water in a towel.
  2. Put each basket over a jar or can about 4.5 in (11.4 cm) wide, standing upside down, so the base sits flat on top.
  3. Ease the sides down evenly and line up the fan stems so they stand straight.
  4. Pin each scallop point so the rim measures 6.5 in (16.5 cm) across.
  5. If you want firmer baskets, mist them with fabric starch.
  6. Let them dry completely, which takes 24 hours, then remove them.
  7. Steam the straps lightly to straighten them before joining.

Final Quality-Control Checklist

  • Each base is 5 in (12.7 cm) across and lies flat.
  • Each basket has 12 fans per side round and 12 scallops on the rim.
  • Every basket is 3.5 in (8.9 cm) tall.
  • The straps are attached at opposite scallops (1 and 7).
  • The gaps between baskets are both 3 in (7.6 cm).
  • All ends are woven in and the ring loops are secure.
  • The organizer hangs level and a roll fits in each tier.

Troubleshooting

The base cups: the base is too tight. Go up a hook size or add one more sc round, using the same increase pattern.

The base ruffles: the base is too loose. Go down a hook size.

There are 11 or 13 fans: your Round 12 count is off. Recount it to 72 sts.

The fans lean sideways: make sure each fan goes into a tr and each sc goes into a fan center.

The rim flips outward too much: block the basket over a jar and add starch.

The basket tilts when hanging: recheck that the straps are on opposite sides and that the anchoring points are level.

Care

Hand wash cool, reshape while damp, and lay flat or over a jar to dry. Don’t tumble dry.

Three-tier red and black crocheted basket organizer with brass ring hanging on a bright bathroom wall with toilet paper.

Final Notes

Each measurement depends on the one before it:

  • A 72-st base at 5 in (12.7 cm) gives 12 even fan repeats.
  • Those repeats give a 3.5 in (8.9 cm) basket with a 6.5 in (16.5 cm) scalloped rim.
  • The straps add the 8 in (20.3 cm) drop and two 3 in (7.6 cm) gaps.
  • All of that gives a 26.5 in (67.3 cm) organizer.

If the first basket matches its checkpoints, the others and the final assembly will line up too.

Happy crocheting!

Leave a Comment