The Rosebud Initial R is a small, puffy letter keychain that turns leftover cotton into a personal bag charm. The letter is dusty rose and finished with a cream cord bow, two cream rolled roses and four sage-green leaves down the lower left of the stem.
The style is soft and vintage-inspired. Dense single crochet gives the letter a firm, cushioned feel, and one round of edging creates a clean, rounded rim. This pattern uses US crochet terms.
The finished letter is 3 in (7.6 cm) wide and 3.8 in (9.7 cm) tall. With the chain and ring, the keychain is about 6 in (15.2 cm) long.
You’ll crochet two identical flat letter panels in rows: first the leg, then the stem, then the bowl across both. Next you join the panels with one round of single crochet around the hole and one around the outline, stuffing lightly before you close it. Finally, you add the bow, roses, leaves and hardware.
Finished Size and Construction
- Finished size: 3 in x 3.8 in (7.6 cm x 9.7 cm), letter only
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: DK (weight 3) cotton
- Hook: 3.0 mm
- Number of pieces: 1 keychain (2 letter panels joined into one letter, plus 1 bow, 2 roses and 4 leaves)
- Layout: Single letter R, with the bow at the top left and the roses and leaves on the lower left of the stem
- Panel size (each): 14 sts x 18 rows = 2.8 in x 3.6 in (7.1 cm x 9.1 cm)
- Size before border: 2.8 in x 3.6 in (7.1 cm x 9.1 cm)
- Border depth: 1 round, 0.1 in (0.3 cm) per side
Materials
Use a smooth, mercerized or combed DK cotton. It keeps stitch definition crisp and resists stretching with daily handling. Avoid fuzzy yarn, because it blurs the letter’s outline.
- Dusty rose (Color A): 12 g, about 30 m
- Cream (Color B): 5 g, about 13 m
- Sage green (Color C): 3 g, about 8 m
All quantities include a margin of roughly 20 percent for swatching and tails.
Tools:
- 3.0 mm crochet hook
- Polyester fiberfill, about 3 g
- Gold split key ring, 1 in (2.5 cm), with a gold chain about 1.25 in (3.2 cm) long
- 1 small gold jump ring and two pairs of flat-nose pliers
- Tapestry needle
- Stitch markers
- Scissors and a ruler
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sc2tog: single crochet 2 together (pull up a loop in each of the next 2 sts, yarn over and draw through all 3 loops)
- st(s): stitch(es)
- RS / WS: right side / wrong side
Special stitch: shift row (leg only). Sc2tog, sc in next 2 sts, 2 sc in last st (5 sts). This removes 1 st at the right edge and adds 1 at the left, so the leg moves 1 st left while staying 5 sts wide.
Row direction: Odd rows are RS rows, worked right to left as you look at the RS. Even rows are WS rows. Begin every row with ch 1 and turn. The ch 1 never counts as a stitch.
Gauge and Checkpoints
Gauge: 10 sc x 10 rows = 2 in (5.1 cm), so 5 sts and 5 rows = 1 in (2.5 cm).
Make one panel and measure it before you start the second. The gauge has to be square, because the edging only lies flat at 1 sc per row end when stitches and rows match.
Checkpoints:
- Leg and stem after Row 9: each is 1 in (2.5 cm) wide and 1.8 in (4.6 cm) tall.
- After Row 12: 2.8 in (7.1 cm) wide and 2.4 in (6.1 cm) tall.
- After Row 18: 2.8 in x 3.6 in (7.1 cm x 9.1 cm), with a hole 0.8 in (2.0 cm) wide and 0.6 in (1.5 cm) tall.
If the panel is too big (more than 0.1 in / 0.3 cm over), switch to a 2.75 mm hook. If it is too small, switch to a 3.25 mm hook. If only the height is off, change how high you pull up your loops. Don’t change the stitch counts.

Letter Panels (Make 2 in Color A)
Both panels are identical. When you join them, place the second one behind the first, wrong side facing out, so the outlines line up exactly.
Leg
Ch 6.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across. (5 sts)
Row 2 (WS): Sc in each st across. (5 sts)
Row 3 (RS): Shift row. (5 sts)
Rows 4, 6 and 8 (WS): Sc in each st across. (5 sts)
Rows 5, 7 and 9 (RS): Shift row. (5 sts)
Fasten off. After 4 shift rows, the top of the leg sits 4 sts left of its base. The leg should measure 1 in (2.5 cm) wide and 1.8 in (4.6 cm) tall.
Stem
Ch 6.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across. (5 sts)
Rows 2–9: Sc in each st across. (5 sts)
Do not fasten off. Lay the leg to the right of the stem with the RS facing you and both Row 1s at the bottom. At Row 1, the leg occupies columns 10–14 of a 14-st width. At Row 9, it touches the stem’s right edge (columns 6–10).
Bowl
Row 10 (WS): Sc in 5 stem sts, then continue across the top of leg Row 9: sc in the first 4 sts, 2 sc in the last st. (5 + 4 + 2 = 11 sts)
Row 11 (RS): 3 sc in first st, sc in each of the next 10 sts. (3 + 10 = 13 sts)
Row 12 (WS): Sc in each of the first 12 sts, 2 sc in last st. (12 + 2 = 14 sts)
Checkpoint: 2.8 in (7.1 cm) wide and 2.4 in (6.1 cm) tall.
Row 13 (RS), right column: Sc in the first 5 sts only. (5 sts) Leave the remaining 9 sts unworked.
Rows 14–15: Sc in each st across. (5 sts) Fasten off.
Row 13 (RS), left column: Skip 4 sts after the right column and join Color A in the next st. Sc in that st and the last 4 sts. (5 sts)
Rows 14–15: Sc in each st across. (5 sts) Do not fasten off.
Row 16 (WS): Sc in the 5 left-column sts, ch 4, sc in the 5 right-column sts. (5 + 4 ch + 5 = 14 sts) The 4 skipped sts and the chain frame a hole 4 sts wide and 3 rows tall.
Row 17 (RS): Sc2tog, sc in next 3 sts, sc in each of the 4 ch, sc in last 5 sts. (1 + 3 + 4 + 5 = 13 sts)
Row 18 (WS): Sc in each of the first 11 sts, sc2tog. (11 + 1 = 12 sts)
Fasten off. Weave in the ends, but keep a long tail on the second panel for closing any gaps. Each panel should measure 2.8 in x 3.6 in (7.1 cm x 9.1 cm).
Border (Joining Edge)
The border is a single sc round worked through both panels at once, which joins them and creates the rolled rim. Hold the panels WS together with the outlines matching, and clip them in place.
Border gauge: 5 sc per 1 in (2.5 cm) along stitch edges and row-end edges, the same as the panel gauge.
Hole Round
Join Color A at a bottom corner of the hole. Working through both layers:
- Sc in each of the 4 skipped sts of Row 12. (4 sts)
- Work 1 sc in each row end of Rows 13–15 on one side. (3 sts)
- Sc 4 along the underside of the Row 16 chain. (4 sts)
- Work 1 sc in each row end of Rows 15–13 on the other side. (3 sts)
Sl st to first sc. (4 + 3 + 4 + 3 = 14 sts) Fasten off.
Outline Round
Join Color A at the bottom left corner of the stem. Work counterclockwise through both layers with the front facing you:
- Stem bottom: 3 sc in first foundation st, sc in next 3, 3 sc in last st. (9 sts)
- Stem inner side: 1 sc in each row end, Rows 2–8. (7 sts)
- Crotch: Sc2tog over the Row 9 row end of the stem and the Row 9 row end of the leg. (1 st)
- Leg inner side: 1 sc in each row end, Rows 8–2. (7 sts)
- Leg bottom: 3 sc in first foundation st, sc in next 3, 3 sc in last st. (9 sts)
- Leg outer side: 1 sc in each row end, Rows 2–9. (8 sts)
- Bowl curve: 1 sc under each of the 4 overhanging sts of Rows 10–12, then 1 sc in each row end, Rows 10–17. (4 + 8 = 12 sts)
- Top: 2 sc in the rightmost st of Row 18 (the sc2tog), sc in next 10, 3 sc in the leftmost st (top left corner). (2 + 10 + 3 = 15 sts)
- Left side: 1 sc in each row end, Rows 17–2. (16 sts)
Partway down the left side, stuff the letter lightly with about 3 g of fiberfill, pushing small tufts into the leg and bowl. Finish the side, then sl st to the first sc.
Total: 9 + 7 + 1 + 7 + 9 + 8 + 12 + 15 + 16 = 84 sts.
Why the math works:
- The gauge is square, so 1 sc per stitch and 1 sc per row end lies flat.
- Each of the 5 sharp outer corners uses its corner stitch and adds 2 sc to turn.
- The crotch is the only inside corner, and its sc2tog stops it from ruffling.
- The top right needs only 2 sc, because the decreases in Rows 17–18 already round that edge.
- The border adds 0.1 in (0.3 cm) on every side, so the letter grows from 2.8 in x 3.6 in (7.1 cm x 9.1 cm) to 3 in x 3.8 in (7.6 cm x 9.7 cm).
Embellishments
Bow (Make 1 in Color B)
Ch 46. Sl st in the back bump of the 2nd ch from hook and in each ch across. (45 sl sts) The cord is about 9 in (22.9 cm) long.
Tie a bow with loops of about 0.6 in (1.5 cm) and tails of about 0.75 in (1.9 cm). The finished bow is about 1.25 in (3.2 cm) wide. Secure the knot with a few stitches.
Rolled Rose (Make 2 in Color B)
Ch 22.
Row 1: Sc in 2nd ch from hook and in each ch across. (21 sts) The strip is about 4.2 in (10.7 cm) long.
Row 2: Sc in first st, [skip 1, 5 hdc in next st, skip 1, sc in next st] twice, [skip 1, 5 dc in next st, skip 1, sc in next st] 3 times. (1 + 12 + 18 = 31 sts, 5 petals)
Fasten off, leaving a 10 in (25.4 cm) tail. Starting at the hdc end, roll the strip tightly for the center, then more loosely so the dc petals open. Stitch through the base several times. Each rose is about 1 in (2.5 cm) across.
Leaf (Make 4 in Color C)
Ch 7. Sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, hdc in next ch, 3 sc in last ch. Working along the other side of the chain: hdc in next ch, dc in next 2 ch, hdc in next ch, sc in last ch. Sl st to first sc. (5 + 3 + 5 = 13 sts)
Each leaf is about 1 in (2.5 cm) long. If you like, add a vein in surface sl st.
Assembly
- Sew the upper rose to the stem with its center about 1 in (2.5 cm) above the bottom edge, slightly overlapping the left edge.
- Sew the lower rose just below it, over the bottom left corner.
- Tuck the leaves behind the roses: two by the upper rose (one pointing up-left, one pointing left), one to the left of the lower rose, and one at its lower right. Sew down only the leaf bases.
- Open the jump ring with pliers. Pass it through the top edge 0.4 in (1.0 cm) in from the top left corner and through the end link of the chain, then close it.
- Sew the bow over the jump ring.
Final Blocking
- Lightly mist the letter and appliqués with water. Don’t soak them.
- Shape the outline with your fingers: a straight stem, a clean diagonal leg and a square top left corner.
- Open the hole with the hook handle.
- Pin the letter at 3 in x 3.8 in (7.6 cm x 9.7 cm), with the pins in the border only.
- Fluff the petals and flatten the leaves.
- Let it dry completely before use.
Final Quality-Control Checklist
- Each panel has 14 sts and 18 rows and measures 2.8 in x 3.6 in (7.1 cm x 9.1 cm).
- The hole round has 14 sts and the outline round has 84 sts.
- The finished letter measures 3 in x 3.8 in (7.6 cm x 9.7 cm).
- No stuffing shows through the stitches.
- The leg runs in a smooth diagonal.
- The roses are secure and the leaf tips are free.
- The jump ring is fully closed.
Troubleshooting
- The leg leans the wrong way: The shift rows were worked on WS rows. Work them on RS Rows 3, 5, 7 and 9.
- There’s a gap where the leg meets the bowl: Close it with the panel tail.
- The edge ruffles: Extra sc were added. Work exactly 1 sc per row end.
- The edge cups: Check that every outer corner has 3 sc.
- Stuffing shows through: Use less fiberfill, or go down a hook size.
Care
Hand wash in cool water, roll in a towel to press out the water, and dry flat. Keep it out of the dryer.

Final Notes
The measurement chain:
- A square gauge of 5 sts and 5 rows per 1 in (2.5 cm)
- 14 x 18 panels measuring 2.8 in x 3.6 in (7.1 cm x 9.1 cm)
- An 84-st joining round that adds 0.1 in (0.3 cm) per side
- A finished letter of 3 in x 3.8 in (7.6 cm x 9.7 cm)
If every checkpoint matches, the letter will too.
Happy crocheting!