Sage Scallop Tree Ornament Crochet Pattern

This little tree is built from nine soft, scalloped fans stacked into a classic triangle. A small cream trunk and a matching cream loop finish it. The sage green and warm cream colors give it a calm, natural look, and it fits right in on a rustic or Scandinavian-style tree.

Every fan is a simple shell of double crochets worked into a single stitch. The strands spread out from one point and form a rounded arch. Stacked in tiers of 3, 3, 2, and 1, the fans make a tree shape with no shaping math beyond skipping stitches.

The pattern uses US crochet terms. The finished tree measures about 4.5 in (11.4 cm) wide and 4 in (10.2 cm) tall, including the trunk. With the hanging loop it is about 6 in (15.2 cm) tall.

Construction is quick. You work the green tree body flat from the bottom up in four rows, with no fastening off between rows. Then you crochet the cream trunk as a tiny rectangle and sew it on, and add a slip-stitch chain loop at the top.

Finished Size and Construction

  • Finished size: 4.5 in (11.4 cm) wide x 4 in (10.2 cm) tall, plus a 2 in (5.1 cm) loop
  • Skill level: Easy
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4), cotton or cotton blend
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 1 ornament, made from a tree body plus a small trunk and a hanging loop
  • Layout: Fans in 4 tiers of 3, 3, 2, and 1 (9 fans total)
  • Tree body size: 4.5 in (11.4 cm) wide x 3 in (7.6 cm) tall
  • Size before border: Same as finished; this design has no added border
  • Border depth: 0 in (0 cm); the fan scallops form the edge

Materials

Yarn: Use a smooth worsted-weight cotton or cotton blend with good stitch definition. Plied cotton shows the radiating fan strands best. Fuzzy or splitty yarns blur the shells.

  • Color A, sage green: 12 g, about 20 m
  • Color B, cream: 4 g, about 7 m

These quantities include a margin of about 25% for your gauge swatch and yarn tails.

Tools:
– 5.0 mm (H-8) crochet hook
– Tapestry needle
– Scissors
– Stitch marker (optional)
– Ruler or tape measure
– Blocking mat and pins, plus a spray bottle

Abbreviations (US Terms)

  • ch: chain
  • sc: single crochet
  • dc: double crochet
  • sl st: slip stitch
  • sk: skip
  • st(s): stitch(es)
  • RS: right side

Special stitches:
– Large Fan (LF): 7 dc in the same stitch.
– Small Fan (SF): 5 dc in the same stitch.
– Center dc: The middle dc of a fan: the 4th dc of a Large Fan or the 3rd dc of a Small Fan.

Gauge and Checkpoints

Gauge: 18 sc and 20 rows = 4 in (10.2 cm) with a 5.0 mm hook.

Your tree body is your real test piece. Work Row 1 and measure it before going on.

Checkpoints:
– After Row 1: The strip of 3 Large Fans is 4.5 in (11.4 cm) wide and 0.75 in (1.9 cm) tall. Each fan is about 1.5 in (3.8 cm) wide.
– After Row 2: The 3 Small Fans span about 3.75 in (9.5 cm). Total height is 1.5 in (3.8 cm).
– After Row 3: The 2 fans span about 2.75 in (7.0 cm). Total height is 2.25 in (5.7 cm).
– After Row 4: The top fan is about 1.25 in (3.2 cm) wide. Total body height is 3 in (7.6 cm).
– Trunk: 0.9 in (2.3 cm) wide x 1.2 in (3.0 cm) long.

If your Row 1 is too big (wider than 4.75 in / 12.1 cm), go down to a 4.5 mm hook.

If your Row 1 is too small (narrower than 4.25 in / 10.8 cm), go up to a 5.5 mm hook.

Small differences of 0.25 in (0.6 cm) are fine for an ornament. Bigger differences change how the tiers nest.

Stacked sage green yarn balls with cream cord hanging against blurred orange background.

Tree Body (Color A, Sage Green)

The body is worked flat in 4 rows. Each row starts with a turn, and the fans of each new row sit on the fans or valleys below.

Foundation: With Color A, ch 19.

Row 1 (RS): Sc in 2nd ch from hook. Sk 2 ch, LF in next ch, sk 2 ch, sc in next ch. Repeat from * 2 more times.
(25 sts: 4 sc + 3 Large Fans of 7 dc = 21 dc.)

Check the chain math: 1 turning ch + 1 sc + 3 x (2 sk + 1 fan + 2 sk + 1 sc) = 1 + 1 + 18 = 19 ch.

Each Large Fan should form a full half-circle with its strands radiating from the base chain. The sc stitches sit low in the valleys between fans.

Row 2: Ch 1, turn. Sc in first sc. Sk 3 dc, SF in next dc (the center dc), sk 3 dc, sc in next sc. Repeat from * 2 more times.
(19 sts: 4 sc + 3 Small Fans of 5 dc = 15 dc.)

Stitches used from Row 1: 1 + 3 x (3 + 1 + 3 + 1) = 25. ✓

Each Small Fan sits directly above a Large Fan, so the two bottom tiers both have 3 fans. The second tier is slightly narrower than the first.

Row 3: Ch 1, turn. Sl st in first sc and in next 2 dc. Sc in next dc (the center dc of the first Small Fan). Sk 2 dc, SF in next sc, sk 2 dc, sc in next dc (center dc). Repeat from * once more. Leave the remaining sts unworked.
(13 sts: 3 sc + 2 Small Fans of 5 dc = 10 dc, plus 3 sl sts at the start, which are not counted.)

Stitches used from Row 2: 3 sl st + 1 sc + 2 x (2 + 1 + 2 + 1) = 16. That leaves the last 2 dc of the third fan and the final sc unworked: 16 + 3 = 19. ✓

The 2 new fans rise from the valleys between the Row 2 fans, so the tree starts to narrow.

Row 4: Ch 1, turn. Sl st in first sc and in next 2 dc. Sc in next dc (the center dc of the first fan). Sk 2 dc, SF in next sc, sk 2 dc, sc in next dc (center dc). Leave the remaining sts unworked.
(7 sts: 2 sc + 1 Small Fan of 5 dc, plus 3 sl sts, which are not counted.)

Stitches used from Row 3: 3 + 1 + 2 + 1 + 2 + 1 = 10. That leaves 3 unworked: 10 + 3 = 13. ✓

Fasten off, leaving a 6 in (15.2 cm) tail at the top for attaching the loop. Weave in the starting tail at the bottom left.

Body check: Count the fans: 3 + 3 + 2 + 1 = 9. The body is 4.5 in (11.4 cm) wide at the base and 3 in (7.6 cm) tall.

Trunk (Color B, Cream)

Foundation: With Color B, ch 5.

Row 1: Sc in 2nd ch from hook and in each ch across. (4 sc)

Rows 2–6: Ch 1, turn. Sc in each st across. (4 sc)

Fasten off, leaving a 10 in (25.4 cm) tail for sewing.

The trunk is a solid rectangle 0.9 in (2.3 cm) wide x 1.2 in (3.0 cm) long.

Attaching: Lay the body RS up. Center the trunk under the middle Large Fan of Row 1, with the top 0.2 in (0.5 cm) tucked behind the fan’s base. With the tail, whipstitch the top edge of the trunk to the back of the foundation chain. Then tack each top corner so the trunk hangs straight. About 1 in (2.5 cm) of trunk shows below the tree, which makes the total height 4 in (10.2 cm).

Border

This design has no added border, on purpose. The scalloped edge of the fans is the finished edge, and an extra round would flatten the arches.

Edge gauge: Each Large Fan is about 1.5 in (3.8 cm) wide, and each Small Fan about 1.25 in (3.2 cm) wide.

Edge counts per side:
– Bottom edge: 3 Large Fans (21 dc), plus the trunk
– Left side: the outer arch of 1 fan in each of Rows 1–4 (4 fans)
– Right side: the outer arch of 1 fan in each of Rows 1–4 (4 fans)

The 4-fan sides work because each row steps in by half a fan on each side. Row 1 is 3 fans wide, and the top is 1 fan wide, so the outline is a balanced triangle.

Hanging Loop (Color B, Cream)

Chain: With Color B, ch 21.

Row 1: Sl st in the back bump of 2nd ch from hook and in the back bump of each ch across. (20 sl st)

Fasten off, leaving a 6 in (15.2 cm) tail.

The strip is about 4 in (10.2 cm) long. Fold it in half, and sew both ends to the back of the top fan just below its arch. The finished loop stands about 2 in (5.1 cm) high. Tie the green tail from Row 4 around the loop base for extra security, then weave in all ends.

Final Blocking

  1. Lightly spray the ornament with water until it is damp but not wet.
  2. Lay it RS up on a blocking mat.
  3. Pin the base to 4.5 in (11.4 cm) wide, with one pin at the outer edge of each bottom fan.
  4. Pin the top of the top fan so the body is 3 in (7.6 cm) tall.
  5. With your fingers, round each fan into an even arch. Fan the strands so they radiate evenly.
  6. Pin the trunk straight, with 1 in (2.5 cm) showing below the tree.
  7. Lay the loop flat and straight above the top fan.
  8. Let it dry completely before unpinning.

Final Quality-Control Checklist

  • 9 fans in tiers of 3, 3, 2, and 1
  • Row 1 fans each have 7 dc, and all other fans have 5 dc
  • Fans in Row 2 sit directly above the Row 1 fans
  • Fans in Rows 3 and 4 sit in the valleys
  • Base width is 4.5 in (11.4 cm), and body height is 3 in (7.6 cm)
  • Trunk is centered and about 1 in (2.5 cm) of it shows
  • Loop is centered, about 2 in (5.1 cm) high, and firmly attached
  • All ends are woven in on the back

Troubleshooting

Fans look flat or cupped: Your sc is probably in the wrong spot. Recount the skipped stitches: 2 ch in Row 1, 3 dc in Row 2, and 2 dc in Rows 3–4.

The tree leans to one side: You may have skipped the 3 sl sts at the start of Row 3 or Row 4. Without them, the fans shift off center.

Fans ruffle: Your dc are too loose. Go down a hook size, or work the dc a little tighter.

The trunk twists: Tack both top corners, not just the center.

The loop flops sideways: Sew both loop ends side by side, not on top of each other.

Sl sts show at the shoulders: Keep them loose and level. Blocking hides them in the fan arches.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and dry flat. Reshape the fans while the ornament is still damp.

Crocheted sage green tree ornament with cream trunk hanging from evergreen, surrounded by warm twinkling lights.

Final Notes

The measurement chain is short. Row 1 sets the width at 4.5 in (11.4 cm) with 3 Large Fans. Each row after that adds 0.75 in (1.9 cm) of height, which brings the body to 3 in (7.6 cm). The trunk adds 1 in (2.5 cm) for a 4 in (10.2 cm) tree, and the loop adds 2 in (5.1 cm) for a total of 6 in (15.2 cm). If Row 1 matches, the rest will follow.

Happy crocheting!

Leave a Comment