Cranberry Fan Lace Stocking Ornament Crochet Pattern

This little stocking is a lacy Christmas ornament with a classic cranberry-and-cream look. Rows of cream fans sit inside a crisp burgundy lattice. A smooth burgundy edge outlines the shape, and a ridged cream cuff with a hanging loop finishes the top.

The style is vintage and festive. The ornament is flat and single-layer, so it hangs lightly from a branch or works as a gift tag. The pattern uses US crochet terms throughout.

The finished ornament is 5 in (12.7 cm) tall without the loop and 6.25 in (15.9 cm) with it. The foot is 4.2 in (10.7 cm) long and the leg is 3 in (7.6 cm) wide.

You work the lace body flat in rows from the sole up. Every row is worked on the right side, and each row starts with a fresh color join. Then you add one round of burgundy single crochet border, crochet a small cream cuff strip with a loop, and sew the cuff across the top.

Finished Size and Construction

  • Finished size: 5 in (12.7 cm) tall without the loop; 6.25 in (15.9 cm) with the loop
  • Foot length: 4.2 in (10.7 cm); leg width: 3 in (7.6 cm)
  • Skill level: Easy-Intermediate (many color joins, simple stitches)
  • Terminology: US crochet terms
  • Yarn weight: DK (light worsted, #3)
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 2 (lace body, and cuff with loop)
  • Layout: one stocking, with the cuff sewn across the top front of the leg
  • Body before border: 3.8 in (9.7 cm) foot length x 4 in (10.2 cm) tall
  • Border depth: 0.2 in (0.5 cm) on every side
  • Body after border: 4.2 in (10.7 cm) x 4.4 in (11.2 cm)
  • Cuff: 3.25 in (8.3 cm) x 1 in (2.5 cm)

Materials

Pick a smooth, firmly plied DK cotton or cotton blend. Mercerized cotton shows the fans and lattice clearly and blocks flat. Avoid fuzzy yarns, because they blur the open triangles.

  • Burgundy (Color A): 7 g, about 16 m
  • Cream (Color B): 6 g, about 14 m

These quantities include a margin for color-change tails and a test piece. Leftovers from larger projects work well.

Tools:
– 3.5 mm (E-4) crochet hook, plus 3.25 mm and 3.75 mm (F-5) hooks in case you need to adjust gauge
– Tapestry needle
– Scissors
– Rust-proof pins and a blocking mat or folded towel
– Spray bottle of water
– Ruler or tape measure

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • sp(s) – space(s)
  • st(s) – stitch(es)
  • RS – right side
  • WS – wrong side
  • rep – repeat

Special stitches:
– Fan: 7 dc in the same stitch.
– Half-fan: 4 dc in the same stitch. When it is the first stitch of a row, join with a sl st, ch 3 (counts as the first dc), then work 3 dc in the same stitch.
– Center dc of a fan: the 4th dc of a 7-dc fan.

Gauge and Checkpoints

Gauge: 5 sc = 1 in (2.5 cm). One sc row is about 0.2 in (0.5 cm) tall, and one fan or lattice row is about 0.45 in (1.1 cm) tall. On the cuff, 5 hdc = 1 in (2.5 cm) and 4 hdc rows = 1 in (2.5 cm).

Use one complete body as your test piece. It is small, and it tells you more than a swatch would. Measure flat, without stretching.

Checkpoints:
– After Row 1: 19 sc measure 3.8 in (9.7 cm).
– After Row 4: the foot band is 3.8 in (9.7 cm) wide and about 1.55 in (3.9 cm) tall.
– After Row 10: the leg top is 2.6 in (6.6 cm) wide, and the body is 4 in (10.2 cm) tall.
– After the border: 4.2 in (10.7 cm) x 4.4 in (11.2 cm), with the leg 3 in (7.6 cm) wide.
– Cuff: 3.25 in (8.3 cm) x 1 in (2.5 cm).

Too big by more than 0.25 in (0.6 cm)? Change to a 3.25 mm hook. Too small by the same amount? Change to a 3.75 mm (F-5) hook. Keep the ch-3 spaces relaxed. Tight chains pull on the lattice and make the fans cup.

Crocheted red and cream Christmas stocking ornament hanging from white cord among evergreen branches and warm golden lights.

Lace Body

Work every row with the RS facing, from the right edge (heel side) to the left edge (toe side). Unless the pattern says otherwise, fasten off at the end of each row and leave 4 in (10.2 cm) tails. The border covers these tails.

Foundation: With A, ch 20.

Row 1 (A): Sc in 2nd ch from hook and in each ch across. Fasten off. (19 sc)

Row 2 (B, half-fan row): Join B in the first sc. Half-fan in the first sc, sk 2 sts, sc in next st, [sk 2 sts, fan in next st, sk 2 sts, sc in next st] twice, sk 2 sts, half-fan in last st. Fasten off. (2 fans, 2 half-fans, 3 sc = 25 sts)

Row 3 (A, offset lattice): Join A with sc in the first dc (top of the ch-3). Ch 3, dc in next sc, [ch 3, sc in center dc of next fan, ch 3, dc in next sc] twice, ch 3, sc in last dc. Fasten off. (4 sc, 3 dc = 7 sts and 6 ch-3 sps)

This row shifts the fans by half a repeat. Its dc points sit over the Row 2 sc stitches, so the next row of fans sits between the fans below.

Row 4 (B, full foot row): Join B with sc in the first sc. [Fan in next dc, sc in next sc] 3 times, skipping all ch-3 sps. Fasten off. (3 fans, 4 sc = 25 sts)

Number the Row 4 sts from right to left: sc (1), fan (2–8), sc (9), fan (10–16), sc (17), fan (18–24), sc (25). The leg is worked over sts 1–17. Sts 18–25 stay unworked and form the top of the foot.

Row 5 (A, leg lattice): Join A with sc in the first sc. [Ch 3, dc in center dc of next fan, ch 3, sc in next sc] twice. The last sc lands in st 17. Leave the remaining 8 sts unworked. Fasten off. (3 sc, 2 dc = 5 sts and 4 ch-3 sps)

Row 6 (B): Join B with sc in the first sc. [Fan in next dc, sc in next sc] twice. Fasten off. (2 fans, 3 sc = 17 sts)

These fans stack directly above the first two fans of Row 4. The burgundy lattice forms V-points between them.

Row 7 (A): Rep Row 5. (5 sts and 4 ch-3 sps)

Row 8 (B): Rep Row 6. (17 sts)

Row 9 (A): Rep Row 5, but do not fasten off. (5 sts and 4 ch-3 sps)

Row 10 (A, WS): Ch 1, turn. Sc in first sc, [2 sc in next ch-3 sp, sc in next dc, 2 sc in next ch-3 sp, sc in next sc] twice. Do not fasten off. (1 + 6 + 6 = 13 sc)

Row 10 gives the cuff a firm, straight top to sit on. Check that the leg is 2.6 in (6.6 cm) wide.

Cuff and Hanging Loop

The cuff is worked in short rows, so its stitch columns run vertically once it is across the leg.

Foundation: With B, ch 7.

Row 1: Hdc in 3rd ch from hook and in each ch across. The 2 skipped ch do not count as a stitch. (5 hdc)

Rows 2–13: Ch 1, turn, hdc in each st across. (5 hdc) Do not fasten off.

The strip should measure 3.25 in (8.3 cm) long and 1 in (2.5 cm) wide. If it doesn’t, add or remove one row.

Hanging loop: You are now at one corner of the strip, and this becomes the top back (heel-side) corner. Ch 16, then sl st in the same st to form a ring. Work 24 sc into the ring, then sl st in the same corner st. Fasten off, leaving a 12 in (30.5 cm) tail for sewing. (24 sc in the loop) The loop stands about 1.25 in (3.2 cm) above the cuff.

Border

Border gauge: Work 1 sc in the end of each sc row and 2 sc in the end of each dc-height row (fan rows and lattice rows). Work 3 sc in each outer corner of the foot.

Border Round (A, RS): At the end of Row 10, ch 1 and turn so the RS faces you. You are at the top right corner.

  1. Top edge: Sc in each of the 13 sts of Row 10. (13 sc)
  2. Front of leg (Rows 10–5): 1 sc in the end of Row 10, then 2 sc in the end of each of Rows 9, 8, 7, 6 and 5. (1 + 10 = 11 sc)
  3. Top of foot (Row 4, sts 18–25): Sc in each of the 7 dc of the toe fan, then 3 sc in st 25. (7 + 3 = 10 sc)
  4. Toe edge (Rows 4–1): 2 sc in the end of each of Rows 4, 3 and 2, then 1 sc in the end of Row 1. (6 + 1 = 7 sc)
  5. Sole (foundation chain): 3 sc in the first ch, sc in each of the next 17 ch, 3 sc in the last ch. (3 + 17 + 3 = 23 sc)
  6. Back edge (Rows 1–10): 1 sc in the end of Row 1, 2 sc in the end of each of Rows 2–9, then 1 sc in the end of Row 10. (1 + 16 + 1 = 18 sc)

Sl st to the first sc. Fasten off. (13 + 11 + 10 + 7 + 23 + 18 = 82 sc)

Why the math works: An sc row is about as tall as one sc is wide, so it gets 1 sc. A fan or lattice row is about 0.45 in (1.1 cm) tall, and 2 sc cover 0.4 in (1 cm). This draws the edge in slightly and keeps the open lattice from flaring. Along the sole you work 1 sc in each of the 19 foundation chains, plus 2 extra at each corner to round the toe and heel. The inner corner where the leg meets the foot gets no extra stitches, so it stays crisp. The top edge needs no corner increases because the cuff covers it.

The border adds 0.2 in (0.5 cm) on each side. The foot becomes 3.8 in + 0.4 in = 4.2 in (10.7 cm) long, and the body becomes 4 in + 0.4 in = 4.4 in (11.2 cm) tall.

Attach the Cuff

Before you sew, weave in all body tails along the back of the border.

Place the body RS up. Lay the cuff across the top of the leg with its long edges horizontal and the loop at the top right (heel side). Line up the lower edge of the cuff with the top of the Row 9 lattice, so the cuff covers Row 10 and the top border. That is an overlap of 0.4 in (1 cm). The cuff overhangs the leg by about 0.125 in (0.3 cm) on each side.

Using the B tail, whipstitch the lower long edge of the cuff to the top of Row 9, taking one stitch into each cuff row end. Sew the upper long edge to the top border, then tack down both short ends. Keep the stitches snug but not tight, or the leg will gather.

Size checkpoint: The stocking now measures 4.4 in − 0.4 in + 1 in = 5 in (12.7 cm) tall without the loop, and 6.25 in (15.9 cm) with it.

Final Blocking

  1. Spray the stocking evenly until it is damp but not dripping.
  2. Lay it RS up on the blocking surface.
  3. Pin the sole straight to 4.2 in (10.7 cm), and ease the heel and toe into gentle curves.
  4. Pin the back edge straight to 4.4 in (11.2 cm), measured from the sole to the top of the body.
  5. Pin the leg to 3 in (7.6 cm) wide just below the cuff.
  6. Spread the 7 dc of each fan evenly, and ease each ch-3 space into a clean triangle.
  7. Pin the loop flat.
  8. Let the stocking dry completely before unpinning it.

Final Quality-Control Checklist

  • Row 4 has 3 full fans, and Rows 6 and 8 have 2 fans each.
  • The lattice points sit where the pattern places them: on fan centers, or between fans in Row 3.
  • The border has 82 sc, with 3-sc groups at the top of the toe, the bottom of the toe and the heel.
  • No tails show on the RS.
  • The cuff completely covers Row 10 and the top border.
  • The stocking measures 5 in (12.7 cm) tall, 4.2 in (10.7 cm) long at the foot and 3 in (7.6 cm) wide at the leg.

Troubleshooting

Fans cup or ripple: The ch-3 spaces are too tight. Chain more loosely, or go up one hook size for the A rows.

Triangles look stretched: The fans are too tight. Relax your dc stitches, or use a 3.75 mm (F-5) hook for the B rows.

Fans don’t line up: Check Row 3. It is the only offset row, and its dc must go into the Row 2 sc stitches.

Border waves: You worked too many sc into the row ends. Use exactly 2 sc per dc-height row.

Border pulls the edge in: Work the border with a hook one size larger.

Stocking hangs crooked: Make sure the loop is at the exact back corner, and tack the cuff ends down firmly.

Care

Hand wash in cool water with mild soap, roll the stocking in a towel to press out the water, and dry it flat, pinning it again if needed. Store it away from direct sunlight so the burgundy stays rich.

Crocheted wine-red and cream stocking with shell-stitch pattern hanging from an evergreen bough among golden lights and red berries.

Final Notes

Every size in this pattern follows from the one before it. Row 1 sets the foot at 19 sc, or 3.8 in (9.7 cm). The fans follow a 6-stitch repeat. Row 10 sets the leg at 13 sc, or 2.6 in (6.6 cm), and the body reaches 4 in (10.2 cm) tall. The 82-st border brings the body to 4.2 in x 4.4 in (10.7 cm x 11.2 cm). Finally, the 3.25 in (8.3 cm) cuff brings the stocking to 5 in (12.7 cm) tall. If you hit each checkpoint, the finished ornament will match.

Make one for every branch, or tuck one into a holiday card. Happy crocheting!

Leave a Comment