This little curtain has a music-box look. A teal lace band with a row of fan-flower motifs runs across the top, and a cream double-swag scallop runs underneath. Nine slim cords hang from the scallop points. Five cords carry two ballerinas each, and four accent cords carry tiny bows and flowers.
The palette is just two colors: deep teal and soft cream. Each ballerina has a spiral head framed by raised cord arms, a solid teal bodice, a cream tutu of airy chain arches with a teal scalloped hem, and long, slender legs that end in a pointed drop. Small wooden beads weight the cord ends so everything hangs straight.
The pattern uses US crochet terms. The finished curtain is about 20.2 in (51.3 cm) wide and 27 in (68.6 cm) long, measured from the top of the band to the bead tips. Each ballerina is about 7 in (17.8 cm) tall and 3.5 in (8.9 cm) wide.
Make the band first and add the cream scallop edging. Then crochet all the small motifs. Finally, build each cord by chaining down from a scallop point and joining the motifs as you go.
Finished Size and Construction
- Finished size: 20.2 in (51.3 cm) wide x 27 in (68.6 cm) long
- Skill level: Intermediate
- Terminology: US terms
- Yarn weight: DK (#3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 1 band, 10 ballerinas, 35 bows, 30 flowers, 9 cords
- Layout: 9 cords spaced 2 in (5.1 cm) apart, alternating ballerina cords (A) and accent cords (B): A-B-A-B-A-B-A-B-A
- Ballerina size: 7 in (17.8 cm) tall x 3.5 in (8.9 cm) wide
- Band size before edging: 20.2 in (51.3 cm) x 1.8 in (4.6 cm)
- Edging (border) depth: 0.9 in (2.3 cm)
Materials
Choose a smooth, mercerized DK cotton. It gives crisp cord arms and clean chain arches, and it barely stretches when the curtain hangs.
- Teal: 150 g / about 315 m (three 50 g balls of 105 m)
- Cream: 125 g / about 263 m (three 50 g balls of 105 m)
These amounts include a margin of about 20 percent for gauge swatches and joining tails.
Tools:
- 3.5 mm (E-4) crochet hook
- Tapestry needle
- 9 wooden beads, 12 mm (0.5 in / 1.3 cm), with holes wide enough for doubled yarn
- 11 clip curtain rings and a curtain rod
- Stitch markers, scissors, tape measure
- Blocking mat, rust-proof pins, spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sp – space
- st(s) – stitch(es)
- RS – right side
Special stitches
- 3-dc cluster (cl): (Yo, insert hook in indicated st, yo and pull up a loop, yo and draw through 2 loops) 3 times in the same st, yo and draw through all 4 loops.
- Drop-loop join: Take the hook out of the working loop. Insert the hook from front to back through the indicated spot on the motif, pick up the dropped loop and pull it through. Continue chaining.
- Cord finish: After chaining a path, turn and sl st in the back bump of each ch along it. This doubles the thickness and gives the arms and legs their braided look.
Gauge and Checkpoints
Gauge: 20 sc x 22 rows = 4 in (10.2 cm); 20 dc x 10 rows = 4 in (10.2 cm); 5 ch = 1 in (2.5 cm).
Make one complete ballerina before anything else. It is the best gauge test because it uses every stitch in the project.
Checkpoints:
- Head after Rnd 3: 1.1 in (2.8 cm) across
- Bodice after Row 7: 1.6 in (4.1 cm) wide x 1.3 in (3.3 cm) tall
- Tutu after Row 4: 3.5 in (8.9 cm) wide x 1.75 in (4.4 cm) deep
- Whole ballerina: 7 in (17.8 cm) from the top of the hanging loop to the tip of the foot drop
- Band after Row 5: 20.2 in (51.3 cm) wide
If your ballerina is taller than 7.25 in (18.4 cm), switch to a 3.25 mm hook. If it is shorter than 6.75 in (17.1 cm), switch to a 3.75 mm hook. Chains are the usual cause, so check that 5 ch measure 1 in (2.5 cm).

Ballerina (make 10)
Bodice
With teal, ch 9.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across, turn. (8 sc)
Rows 2–7: Ch 1, sc in each st across, turn. (8 sc)
Do not fasten off. The bodice measures 1.6 in (4.1 cm) x 1.3 in (3.3 cm).
Arms
Hold the bodice with the RS facing; the working loop is at the first st of Row 7 (top left corner).
Ch 14, ch 5, sl st in 5th ch from hook to form the hanging loop. Ch 14, sl st in last st of Row 7 (top right corner).
Cord finish: Turn, sl st in back bump of each of the 14 ch, work 8 sc in the hanging loop, sl st in back bump of each of the next 14 ch, sl st in first st of Row 7. Fasten off.
Each arm path is 2.8 in (7.1 cm). Pinch the hanging loop upward so the arms form a pointed oval about 2.4 in (6.1 cm) tall above the bodice.
Head and Neck
With teal, make a magic ring.
Rnd 1: 6 sc in ring, sl st to first sc. (6 sts)
Rnd 2: Ch 1, 2 sc in each st, sl st to first sc. (12 sts)
Rnd 3: Ch 1, (sc in next st, 2 sc in next st) 6 times, sl st to first sc. (18 sts)
The head is 1.1 in (2.8 cm) across, and the spiral of the rounds shows on the front.
Neck: Ch 4. With the bodice RS facing, sl st in 4th st of Row 7 and sl st in 5th st. Then sl st in each of the 4 ch back up to the head and sl st in the head. Fasten off. This makes the narrow two-line neck. Center the head inside the arm oval.
Tutu
Work the tutu in back-and-forth rows into the unused loops of the bodice’s foundation chain.
Row 1: With RS facing, join cream in the first foundation loop. Ch 1, (sc, ch 5, sc) in same loop, (ch 5, sc in next loop) 7 times, ch 5, sc in same last loop, turn. (10 sc, 9 ch-5 loops)
Row 2: Ch 1, sc in first ch-5 loop, (ch 6, sc in next ch-5 loop) 8 times, turn. (9 sc, 8 ch-6 loops)
Row 3: Ch 1, sc in first sc, (ch 8, sc in next sc) 8 times. (9 sc, 8 ch-8 arches) Fasten off cream.
Together, these three rows look like radiating spokes with tiers of arches that get larger toward the hem.
Row 4 (teal hem): Join teal in first sc of Row 3. Ch 1, sc in same sc, *(2 sc, hdc, 5 dc, hdc, 2 sc) in next ch-8 arch, sc in next sc; rep from * 7 more times. Fasten off. (9 sc + 8 x 11 = 97 sts)
Each 11-st group makes one teal scallop over a cream arch, so the hem has 8 scallops.
Legs and Foot Drop
With teal, join in the 4th foundation loop from the back, behind tutu Row 1.
Ch 12 (leg 1). Foot drop: Ch 4, sl st in 4th ch from hook to form a ring. In the ring, work (sc, hdc, dc, ch 2, dc, hdc, sc), then sl st in the base of the ring. Ch 12 (leg 2), sl st in 5th foundation loop.
Cord finish: Turn. Sl st in back bump of each of the 12 ch of leg 2, sl st in base of foot ring, sl st in back bump of each of the 12 ch of leg 1, sl st in 4th foundation loop. Fasten off.
Each leg is 2.4 in (6.1 cm). The legs form a long, narrow V. The foot drop is a pointed diamond about 0.5 in (1.3 cm) long, with its ch-2 point at the bottom.
Small Motifs
Bow (make 35, cream)
Ch 6, sl st in first ch (first loop). Ch 6, sl st in same first ch (second loop). Work 10 sc in each loop, sl st in center. (20 sc) Leave a 6 in (15.2 cm) tail, wrap it around the center 5 times and secure. Each bow is 1.25 in (3.2 cm) wide x 0.6 in (1.5 cm) tall.
Flower (make 30, cream)
Make a magic ring.
Rnd 1: 5 sc in ring, sl st to first sc. (5 sts)
Rnd 2: (Sl st, ch 2, 2 dc, ch 2, sl st) in each st around. (5 petals) Fasten off.
Each flower is 0.8 in (2.0 cm) across.
Band
With teal, ch 102.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (101 sc)
Row 2: Ch 3 (counts as dc), dc in each st across, turn. (101 dc)
Row 3 (flower row): Ch 1, sc in first st, *ch 3, skip 4 sts, work (cl, ch 1) 4 times and then cl again, all in next st, ch 3, skip 4 sts, sc in next st; rep from * 9 more times, turn. (11 sc, 10 five-cluster fans)
Row 4 (conversion row): Ch 3 (counts as dc), *2 dc in ch-3 sp, dc in top of each of 5 cl (skip ch-1 sps), 2 dc in next ch-3 sp, dc in next sc; rep from * 9 more times, turn. (1 + 10 x 10 = 101 dc)
Each repeat gives back exactly 10 sts (2 + 5 + 2 + 1), so the band stays straight.
Row 5: Ch 1, sc in each st across. (101 sc) Fasten off.
Checkpoint: 20.2 in (51.3 cm) x 1.8 in (4.6 cm).
Make All Pieces
| Piece | Qty | Colors |
|---|---|---|
| Ballerina | 10 | Teal + cream |
| Bow | 35 (15 for A, 20 for B) | Cream |
| Flower | 30 (10 for A, 20 for B) | Cream |
| Band + edging | 1 | Teal + cream |
| Cords | 9 (5 A, 4 B) | Teal |
Layout across the band (edging junctions 1–11):
Junction: 1 2 3 4 5 6 7 8 9 10 11
Cord: - A B A B A B A B A -
Border: Cream Swag Edging
Work the edging into the unused loops of the band’s foundation chain, at the same gauge of 5 sts per inch.
Row 1: Join cream in first loop. Ch 1, sc in same loop, *ch 9, skip 9 loops, sc in next loop; rep from * 9 more times, turn. (11 sc, 10 ch-9 arches)
Row 2: Ch 1, sc in first sc, *ch 11, sc in next sc; rep from * 9 more times. (11 sc, 10 ch-11 swags) Fasten off.
Why the math works: Row 1 uses 1 + 10 x (9 + 1) = 101 loops, which is exactly the width of the band. The 11 sc land on band sts 1, 11, 21 … 101, so the junctions sit 10 sts, or 2 in (5.1 cm), apart. The longer ch-11 swags in Row 2 hang below Row 1 to make the double scallop, and the junction sc stay in the same positions.
Joining: Building the Cords
All cords are teal chains joined to the motifs with the drop-loop join. Keep the chains relaxed but even, because tight chains shorten the cords and twist the motifs.
Cord A (make 5, junctions 2, 4, 6, 8, 10):
- Join teal in junction sc. Ch 6, join to bow center, ch 3, join to back center of flower, ch 3, sl st through ballerina hanging loop. Fasten off. (3.8 in / 9.7 cm)
- Join teal in ch-2 point of foot drop. Repeat the step 1 sequence, attaching the second ballerina. Fasten off.
- Join teal in ch-2 point of the second foot drop. Ch 4, join to bow center, ch 4. Cut the yarn, leaving a 6 in (15.2 cm) tail. Thread on a bead, knot below it and weave the tail back up. (2.7 in / 6.9 cm)
Cord A: 3.8 + 7 + 3.8 + 7 + 2.7 = 24.3 in (61.7 cm).
Cord B (make 4, junctions 3, 5, 7, 9):
Join teal in junction sc. *Ch 8, join to bow center, ch 8, join to back center of flower; rep from * 4 more times (5 bows, 5 flowers). Ch 4, then finish with a bead as for Cord A.
Cord B: 5 x 4.6 + 0.8 + 0.5 = 24.3 in (61.7 cm).
Checkpoint: hang the curtain. Band 1.8 in + edging 0.9 in + cord 24.3 in = 27 in (68.6 cm). Ballerinas on neighboring A cords sit 4 in (10.2 cm) apart, center to center, so the 3.5 in (8.9 cm) tutus have a 0.5 in (1.3 cm) gap between them.
Final Blocking
- Weave in all ends before blocking.
- Spray each ballerina until damp. Pin the bodice square, pin the arm oval to a point, and pin each tutu scallop outward.
- Pin the leg V straight and the foot drop to a point.
- Pin the band flat to 20.2 in (51.3 cm), then pin each swag of the edging into an even curve.
- Pin the bows and flowers flat.
- Let everything dry completely, then hang. The weight of the pieces will straighten the cords the rest of the way.
Final Quality-Control Checklist
- 10 ballerinas, each 7 in (17.8 cm) tall
- Each tutu hem shows 8 teal scallops
- Band has 101 sts and 10 fan-flowers
- Edging has 11 junction sc and 10 double swags
- 5 A cords and 4 B cords in alternating order
- All cords 24.3 in (61.7 cm)
- Beads knotted securely, all ends woven in
Troubleshooting
- Tutu cups instead of fanning out: The chains are too tight. Chain more loosely, or add 1 ch to each Row 3 arch.
- Arms collapse onto the head: Block the oval to a point and let it dry fully. Stiffen lightly if needed.
- Band ripples: The Row 4 count is off. Recount 10 dc per repeat.
- Cords are uneven: Recount the chains. One extra ch per segment adds up quickly.
- Ballerina spins: Join the cord exactly at the center of the hanging loop and at the foot point.
Care
Hand wash in cool water with mild soap, roll in a towel, and dry flat with light pinning. Do not wring the cords.

Final Notes
Here is the measurement chain. A gauge of 5 sts per inch gives a 101-st band that is 20.2 in (51.3 cm) wide. The 10-st repeats place the junctions 2 in (5.1 cm) apart. Two 7 in (17.8 cm) ballerinas and the 3.8 in (9.7 cm) segments make 24.3 in (61.7 cm) cords, and the full curtain hangs 27 in (68.6 cm). If your first ballerina matches the checkpoints, the rest of the curtain will measure correctly too.
Happy crocheting!