Pirouette Ballerina Motif Crochet Pattern

This little dancer is a single crocheted motif. She is a navy blue ballerina with her arms raised in a pointed oval above a spiral head. She has a ridged navy bodice, a lacy cream tutu with seven scallops, and two slim legs that meet in a pointed toe. A small ring at the top of her arms lets her hang.

The palette uses only two colors, deep navy and soft cream. The navy forms the outline: arms, head, bodice, hem edge and legs. The cream fills the skirt with open spokes and lacy arches. The strong contrast makes her easy to see from across a room.

The pattern uses US crochet terms. The finished motif is about 4.5 in (11.4 cm) wide across the skirt and 9 in (22.9 cm) tall from the hanging ring to the toe.

The motif is worked in one continuous piece with no sewing. You crochet the head in a spiral and work the neck and bodice in rows straight off the head. Then you add the cream skirt across the waist and edge the hem in navy. Last, you work the arm loop and the legs as chain cords covered in single crochet.

Finished Size and Construction

  • Finished size: 4.5 in (11.4 cm) wide x 9 in (22.9 cm) tall
  • Skill level: Easy-intermediate
  • Terminology: US crochet terms
  • Yarn weight: Sport / light (2), mercerized cotton
  • Hook: 2.75 mm (US C-2)
  • Number of pieces: 1 (one continuous motif, no sewing)
  • Layout: Single motif, no joining
  • Piece size: 4.5 in (11.4 cm) x 9 in (22.9 cm)
  • Skirt size before border: 4.25 in (10.8 cm) wide x 1.75 in (4.4 cm) deep
  • Border depth: 0.125 in (0.3 cm), one row of navy single crochet along the hem

Materials

Choose a smooth, tightly plied mercerized cotton. It gives crisp stitch definition, holds the pointed arm shape after blocking and shows the spiral head clearly. Avoid fuzzy or splitty yarn, because the cords will look lumpy.

  • Navy (Color A): 8 g / 25 m
  • Cream (Color B): 5 g / 15 m

These amounts include a generous margin for your gauge test and small differences in tension.

Tools:

  • 2.75 mm (US C-2) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch markers (2)
  • Blocking mat and rust-proof pins
  • Spray bottle; optional light spray starch

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • BLO – back loop only
  • sp(s) – space(s)
  • st(s) – stitch(es)
  • MR – magic ring
  • RS – right side

Special stitch – sc BLO: Insert the hook under the back loop only of the stitch. Yarn over and pull up a loop, then yarn over and pull through both loops. The front loops you skip form the horizontal ridges on the bodice.

Gauge and Checkpoints

Gauge: 12 sc and 13 rows = 2 in (5.1 cm) in sc worked in rows. That is 6 sc per inch (2.5 cm).

The head is your gauge test. Work Rounds 1–4 of the head and measure it before going further.

Checkpoints:

  1. Head after Round 4: 1.25 in (3.2 cm) across.
  2. Neck after Row 2: about 0.7 in (1.8 cm) wide.
  3. Bodice after Row 9: about 1.3 in (3.3 cm) wide and 1.4 in (3.6 cm) from neck to waist.
  4. Skirt after Row 4: 4.25 in (10.8 cm) wide and 1.75 in (4.4 cm) deep.
  5. Skirt after the navy border: 4.5 in (11.4 cm) wide and 1.9 in (4.8 cm) deep.
  6. Full motif after blocking: 4.5 in (11.4 cm) x 9 in (22.9 cm).

If your head is too big (over 1.4 in / 3.6 cm), go down to a 2.5 mm hook. If it is too small (under 1.1 in / 2.8 cm), go up to a 3 mm hook. Start again with the new hook so every part of the dancer stays in proportion.

Blue crocheted figure with circular spiral stitch head and braided rope-like limbs on neutral background.

Head (Navy)

Work the head in a continuous spiral. Do not join the rounds. Mark the first stitch of each round.

Round 1: With Color A, 6 sc in MR. (6 sts)

Round 2: 2 sc in each st around. (12 sts)

Round 3: [Sc in next st, 2 sc in next st] 6 times. (18 sts)

Round 4: [Sc in next 2 sts, 2 sc in next st] 6 times. (24 sts)

Sl st in the next st to smooth the step at the end of the spiral. Do not fasten off.

Checkpoint: 1.25 in (3.2 cm) across. Pull the ring tightly closed so the spiral shows clearly in the center.

Neck and Bodice (Navy)

Work these in turned rows straight off the edge of the head. The sl st you just made is at the bottom of the head.

Row 1 (neck): Ch 1, sc in same st as sl st and in next 3 sts of Round 4. (4 sts)

Row 2: Ch 1, turn, sc in each st across. (4 sts)

Checkpoint: neck about 0.7 in (1.8 cm) wide.

Row 3 (shoulder increase): Ch 1, turn, 2 sc in first st, sc in next 2 sts, 2 sc in last st. (6 sts)

Row 4 (shoulder increase): Ch 1, turn, 2 sc in first st, sc in next 4 sts, 2 sc in last st. (8 sts)

Place a marker in the side edge of Row 4 at each end. These are the shoulders, where the arms attach later.

Rows 5–9 (ridged bodice): Ch 1, turn, sc BLO in each st across. (8 sts per row)

Fasten off Color A.

Checkpoint: the bodice is about 1.3 in (3.3 cm) wide and 1.4 in (3.6 cm) from the top of Row 1 to the bottom of Row 9. The five BLO rows show as clear horizontal ridges.

Skirt (Cream)

Work the skirt in turned rows across the 8 sts of bodice Row 9. Each row has more stitches than the row before it, so the skirt fans out.

Row 1: Join Color B with sl st in first st of Row 9. Ch 3 (counts as dc), 2 dc in each of next 7 sts. (1 + 14 = 15 dc)

Row 2 (spokes): Ch 5, turn (counts as dc + ch 2), dc in next dc, [ch 2, dc in next dc] 13 times. (15 dc, 14 ch-2 sps)

Work the last dc into the top of the turning ch-3. These 15 dc are the spokes that fan out across the tutu.

Row 3 (arches): Ch 1, turn, sc in first dc, [ch 5, skip next dc, sc in next dc] 7 times. (8 sc, 7 ch-5 arches)

Work the last sc into the 3rd ch of the turning ch-5. Every other spoke holds one end of an arch, which divides the hem into seven sections.

Row 4 (lacy scallops): Ch 1, turn, sc in first sc, [work (dc, [ch 1, dc] 4 times) in next ch-5 arch, sc in next sc] 7 times. (7 scallops of 5 dc and 4 ch-1 sps each: 35 dc, 28 ch-1 sps, 8 sc)

Fasten off Color B.

Checkpoint: the skirt is 4.25 in (10.8 cm) wide and 1.75 in (4.4 cm) deep, measured from the waist to the tip of the center scallop. Lay it flat. The seven scallops should sit side by side without overlapping.

Hem Border (Navy)

Border gauge: one sc in every dc, every ch-1 sp and every sc of Row 4. Along the curved hem this comes to about 6 sc per inch (2.5 cm), which matches your main gauge.

Border row: With RS facing, join Color A with sl st in first sc of Row 4. Ch 1, sc in same sc, [(sc in next dc, sc in next ch-1 sp) 4 times, sc in next dc, sc in next sc] 7 times. (71 sc)

The count for each section:

  • Each scallop: 5 sc in dc + 4 sc in ch-1 sps = 9 sc
  • Each sc between scallops or at the ends: 1 sc, 8 in total
  • Left side (first sc + scallops 1–3 + the sc after each): 1 + 27 + 3 = 31 sc
  • Center scallop 4: 9 sc
  • Right side (sc after scallop 4 + scallops 5–7 + the sc after each): 1 + 27 + 3 = 31 sc
  • Total: 31 + 9 + 31 = 71 sc

Fasten off and weave in the ends.

Why the math works: The outer edge of Row 4 already has 71 stitches and spaces (8 sc + 35 dc + 28 ch-1 sps = 71). One sc in each gives 71 sc, so the border adds an outline without adding length. A curved hem has no corners, so you don’t need extra corner stitches. The edge stays flat instead of ruffling or cupping.

Checkpoint: the skirt is now 4.5 in (11.4 cm) wide and 1.9 in (4.8 cm) deep. The border adds 0.125 in (0.3 cm) all along the hem.

Arms and Hanging Ring (Navy)

The arms are one chain cord. It leaves the right shoulder, rises around the head, forms a tiny ring at the top and comes back down to the left shoulder. A row of sc along the chain thickens it into the braided-looking outline.

Chain: Join Color A with sl st in the marked side edge of Row 4 at the right shoulder. Ch 20 (first arm), ch 6, sl st in 6th ch from hook to form the hanging ring, ch 20 (second arm), sl st in the marked side edge of Row 4 at the left shoulder.

Check that the chain is not twisted before you continue.

Covering row: Ch 1, turn, sc in each of the 20 ch of the second arm, 8 sc in the hanging ring, sc in each of the 20 ch of the first arm, sl st in the right shoulder. (20 + 8 + 20 = 48 sc)

Fasten off.

Checkpoint: each arm is about 3.3 in (8.4 cm) long, and the ring is about 0.4 in (1.0 cm) across. Once the arms are shaped into a point, the distance from the top of the ring to the shoulders is about 3.25 in (8.3 cm). The head hangs free inside the arm loop.

Legs and Pointed Toe (Navy)

The legs hang from the center scallop of the hem border. Number the 9 border sc of scallop 4 from 1 to 9.

Chain: With RS facing, join Color A with sl st in sc 4 of the center scallop. Ch 15 (first leg), ch 6, sl st in 6th ch from hook to form the toe ring, ch 15 (second leg), sl st in sc 6 of the center scallop.

Sc 5 stays empty between the legs. This leaves a small gap at the top of the legs before they meet at the toe.

Covering row: Ch 1, turn, sc in each of the 15 ch of the second leg, in the toe ring work (2 sc, hdc, dc, ch 2, dc, hdc, 2 sc), sc in each of the 15 ch of the first leg, sl st in sc 4. (15 + 8 + 15 = 38 sts, plus 1 ch-2 point)

Fasten off. Weave in all ends.

Checkpoint: each leg is about 2.5 in (6.4 cm) long. The toe is about 0.6 in (1.5 cm) long, with its point at the ch-2. The legs and toe together measure 3.1 in (7.9 cm).

Final Blocking

  1. Weave in every end, hiding navy ends in navy stitches and cream ends in cream stitches.
  2. Soak the motif in cool water for 5 minutes, then roll it in a towel to squeeze out the extra water.
  3. Lay it face up on a blocking mat.
  4. Pin the hanging ring at the top and the toe at the bottom, 9 in (22.9 cm) apart.
  5. Pin each scallop tip so the skirt fans out to 4.5 in (11.4 cm) wide.
  6. Pin both arms outward at elbow height, then pull the top into a clean point just below the ring. The arms should form a pointed oval around the head, with even space on both sides.
  7. Center the head inside the arm loop and pin the bodice straight.
  8. Pin the legs side by side so they meet at the toe.
  9. Mist lightly with water or light spray starch, and let it dry completely before you remove the pins.

Final Quality-Control Checklist

  • Head is 1.25 in (3.2 cm) across with a visible spiral.
  • Bodice shows five horizontal ridges and is about 1.3 in (3.3 cm) wide.
  • Skirt has 15 spokes, 7 arches and 7 lacy scallops.
  • Hem border has exactly 71 sc and lies flat.
  • Arms have 48 sc in total and form an even pointed oval.
  • Hanging ring is open and sits at the top of the point.
  • Legs have 38 sts plus the ch-2 point, hang straight and meet in one pointed toe.
  • Full motif measures 4.5 in (11.4 cm) x 9 in (22.9 cm).
  • No ends show on the front.

Troubleshooting

Head is cupping. Your tension is too tight. Loosen up or go up a hook size. The head must lie flat.

Skirt ruffles. Check Row 2 for extra dc and make sure each scallop in Row 4 has 5 dc. Work the border loosely.

Skirt curls up at the hem. The border is too tight. Redo it with a looser hand, or go up 0.25 mm for that row only.

Arms look lopsided. Count the chains: both arms need exactly 20 ch. Block again so the point is centered.

Legs twist. The chain was twisted before the covering row. Undo it and chain again.

Bodice ridges are faint. Make sure you work in the back loop only on Rows 5–9.

Care

Hand wash in cool water with mild soap. Roll in a towel, dry flat and reshape the arms with pins if needed. Do not tumble dry.

Navy crocheted figure with cream skirt and raised arms hangs in a window overlooking green garden scenery.

Final Notes

The measurements build on each other. The 1.25 in (3.2 cm) head checks your gauge. The bodice grows from 4 to 8 sts and reaches 1.3 in (3.3 cm) wide. The skirt fans from 15 dc out to seven scallops at 4.25 in (10.8 cm), and the 71-st navy border brings it to 4.5 in (11.4 cm). Add 3.25 in (8.3 cm) of arms above the shoulders and 3.1 in (7.9 cm) of legs below the hem, and your dancer stands 9 in (22.9 cm) tall.

Happy crocheting!

Leave a Comment