The Ivy Ladder Doorway Curtain is made of seven long, airy strips that hang side by side from a rod. Each strip has a chain stem up the center, pairs of rounded fan leaves along it, and a straight chain rail down each edge. Light passes through easily, and the strips part with a touch of the hand.
This sample alternates sage green and cream: four green strips and three cream strips. The look is calm and botanical and suits a pantry, laundry room, closet or patio door. The pattern uses US crochet terms throughout.
Each finished strip measures 3.5 in (8.9 cm) wide and 78 in (198.1 cm) long including the hanging loop. With 1.25 in (3.2 cm) gaps between strips, the curtain spans 32 in (81.3 cm).
Each strip is made in three stages. First you chain the stem and work the leaf pairs as you go. Then a rail border joins the leaf tips along both edges and adds a top bar. Finally you add a pointed top with a hanging loop. Because the strips are never sewn together, you can make them one at a time and carry them anywhere.
Finished Size and Construction
- Finished size (one strip): 3.5 in (8.9 cm) wide x 78 in (198.1 cm) long including the loop
- Finished curtain: 32 in (81.3 cm) wide as hung
- Skill level: Easy to intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 5 mm (H-8)
- Number of pieces: 7 separate strips
- Layout: 7 strips in one row, alternating colors, not joined
- Piece size before border: 75 in (190.5 cm) stem; leaves span about 3 in (7.6 cm) tip to tip
- Border depth: about 0.25 in (0.6 cm) per side, which brings the width to 3.5 in (8.9 cm)
Materials
Choose a smooth, mercerized or combed worsted cotton. Cotton holds its length when hanging and shows the fan stitches clearly. Avoid stretchy acrylic and superwash wool, because long chain strips grow under their own weight.
These estimates assume yarn with about 155 m per 100 g. Each strip uses about 65 m (42 g).
- Sage green: 200 g / 310 m (4 strips)
- Cream: 150 g / 233 m (3 strips)
The quantities include a margin of about 20% for gauge differences and weaving in ends.
Tools:
- 5 mm (H-8) hook
- Tapestry needle
- Locking stitch markers (at least 4)
- Scissors
- Tape measure
- Spray bottle
- A curtain rod about 36 in (91.4 cm) long, with a diameter no larger than 1.5 in (3.8 cm)
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- st(s) – stitch(es)
Special stitch – Fan Leaf: Ch 7, then sl st in the base chain to form a ch-7 loop. Work (hdc, 9 dc, hdc) in the loop, then sl st in the same base chain. That is 11 sts in total. The 6th st (the 5th dc) is the leaf tip.
Base chain: The last stem chain you made before starting a leaf pair. Both leaves of a pair are anchored in this one chain.
Gauge and Checkpoints
Chain gauge: 16 ch = 4 in (10.2 cm), measured lightly stretched along the stem.
Leaf gauge: One Fan Leaf measures about 1.5 in (3.8 cm) from base to tip. A leaf pair spans about 3 in (7.6 cm) tip to tip.
Test piece first. Before starting a full strip, chain 14 and work a leaf pair. Repeat that twice more for 3 pairs, which uses 42 stem chains. The sample should measure 10.5 in (26.7 cm) from the first chain to the third leaf pair.
- Sample too long: go down to a 4.5 mm hook.
- Sample too short: go up to a 5.5 mm hook.
- Leaves too wide but chain on gauge: work the leaf stitches tighter, or switch the 2 hdc to sc.
Checkpoints on the full strip:
- After 4 leaf pairs: 56 ch, 14 in (35.6 cm)
- After 10 leaf pairs: 140 ch, 35 in (88.9 cm)
- After 20 leaf pairs plus the top: 300 ch, 75 in (190.5 cm)
- After the border: 3.5 in (8.9 cm) wide

Part 1: Stem and Leaf Pairs
Work from the bottom of the strip toward the top. Keep the stem chains even. The stem is the backbone of the strip, so loose or uneven chains will show.
Foundation: Make a slip knot and ch 14. The 14th chain is the base chain for leaf pair 1.
Leaf Pair (repeat unit):
- Left leaf: Ch 7 and sl st in the base chain. Work (hdc, 9 dc, hdc) in the ch-7 loop, then sl st in the base chain. (11 sts)
- Right leaf: Ch 7 and sl st in the base chain. Work (hdc, 9 dc, hdc) in the new loop, then sl st in the base chain. (11 sts)
Both leaves now sit on the same base chain. Lay the strip flat and push one leaf to each side of the stem, rounded edge facing up and out.
Pairs 2–20: Ch 14 (the 14th ch is the new base chain), then work a Leaf Pair. Repeat from * 18 more times, for 20 leaf pairs in total.
Stem count: 14 + (19 × 14) = 280 ch at pair 20.
Leaf count: 40 leaves × 11 sts = 440 leaf sts.
Top extension: Ch 20 and fasten off. The 14th of these chains is stem ch 294, the top bar level. Mark it with a stitch marker. The 20th chain is stem ch 300, the stem tip.
Final stem count: 300 ch, 75 in (190.5 cm).
Mark the tip of leaf 1 on each side and the tip of leaf 20 on each side. That makes counting the rail sections easier.
Part 2: Make All Pieces
Make 7 complete strips (Parts 1, 3 and 4 below):
- Sage green: 4 strips (positions 1, 3, 5, 7)
- Cream: 3 strips (positions 2, 4, 6)
Layout (as seen from the room, left to right):
| G | gap | C | gap | G | gap | C | gap | G | gap | C | gap | G |
1 2 3 4 5 6 7
G = sage green strip, 3.5 in (8.9 cm)
C = cream strip, 3.5 in (8.9 cm)
gap = 1.25 in (3.2 cm)
Width check: (7 × 3.5 in) + (6 × 1.25 in) = 24.5 in + 7.5 in = 32 in (81.3 cm).
Part 3: Joining (Hanging on the Rod)
The strips are not sewn or crocheted to each other. Hanging them separately keeps the doorway easy to walk through and lets each strip fall straight. Each strip connects to the rod only through its own top loop, which is worked in Part 4 (Top Point and Hanging Loop).
Stitch logic: The hanging loop is a ch-24 ring closed at the stem tip. That gives 6 in (15.2 cm) of circumference, which fits a rod up to 1.5 in (3.8 cm) across. The loop hangs about 3 in (7.6 cm) below the top of the rod.
Tension advice: Chain the loop at the same tension as the stem. A tight loop will tip the point forward. A loose loop will let that strip hang lower than its neighbors.
Size checkpoint: Hang all seven strips before blocking. Every point should sit at the same height, and the gaps should measure 1.25 in (3.2 cm) at the rod. If one strip hangs more than 0.5 in (1.3 cm) lower than the others, redo its loop with ch 22.
Part 4: Border (Rails, Top Bar and Point)
Each strip gets its own border. Because the strips are never joined, each border only has to match its own strip’s stem, not the combined width of several pieces.
Border gauge: Same as the stem, 16 ch = 4 in (10.2 cm). The leaf pairs are 14 stem chains (3.5 in / 8.9 cm) apart. Each rail section is therefore 13 ch + 1 sc = 14 sts, so the rails grow at exactly the same rate as the stem.
Left Rail (worked bottom to top)
Make a slip knot with the strip’s color.
Ch 13, then sc in the leaf tip of left leaf 1. Ch 13, sc in the leaf tip of the next left leaf. Repeat from * 18 more times, ending at left leaf 20. Ch 14. The 14th chain is the top-left corner.
Left rail count: 13 + 1 + (19 × 14) + 14 = 294 sts (20 sc + 274 ch). That equals 73.5 in (186.7 cm), the same height as stem ch 294.
Top Bar
Continuing from the top-left corner, ch 7 and sl st in stem ch 294 (the marked chain). Ch 7. The 7th chain is the top-right corner.
Top bar count: 7 ch + 1 sl st + 7 ch = 15 sts, measuring 3.5 in (8.9 cm). Each half is 1.75 in (4.4 cm), so the rails sit 1.75 in (4.4 cm) out from the stem, just past the leaf tips.
Right Rail (worked top to bottom)
Ch 13, then sc in the leaf tip of right leaf 20. Ch 13, sc in the leaf tip of the next right leaf down. Repeat from * 18 more times, ending at right leaf 1. Ch 14 and fasten off.
Right rail count: 13 + 1 + (19 × 14) + 14 = 294 sts (20 sc + 274 ch). This matches the left rail.
Top Point and Hanging Loop
- Join yarn with a sl st at the top-left corner.
- Ch 9 for the left diagonal, about 2.25 in (5.7 cm). Sl st in stem ch 300, the stem tip.
- Ch 24 and sl st in the stem tip again to close the hanging loop.
- Ch 9 for the right diagonal and sl st in the top-right corner. Fasten off.
The point rises 1.5 in (3.8 cm) above the top bar.
Why the Math Works
- Stem: 300 ch ÷ 4 ch per in = 75 in (190.5 cm).
- Rails: 294 sts ÷ 4 = 73.5 in (186.7 cm), ending level with the top bar at stem ch 294.
- Rail sections: Each 14-st section between leaf tips matches the 14-ch stem section between leaf pairs, so the rails never pull or ripple.
- Point: It adds 1.5 in (3.8 cm), bringing the strip to 75 in (190.5 cm).
- Loop: It adds 3 in (7.6 cm) of drop.
- Total: 73.5 + 1.5 + 3 = 78 in (198.1 cm).
Final Blocking
- Weave in every tail along a chain, never across an open space.
- Mist each strip until it is evenly damp, not soaked.
- Lay the strip flat on a towel. Open each leaf into a half circle with the flat base next to the stem.
- Straighten both rails so they run parallel to the stem, 1.75 in (4.4 cm) away on each side.
- Check that the strip is 3.5 in (8.9 cm) wide all the way down. Pin any narrow spots.
- Hang the strip from the rod while it is still slightly damp so gravity can even out the chains.
- Let it dry fully. Then check that the point is 75 in (190.5 cm) above the bottom of the strip.
Final Quality-Control Checklist
- 7 strips: 4 sage green and 3 cream
- Each strip has 20 leaf pairs, which is 40 Fan Leaves
- Each leaf has 11 sts, and the rail sc sits on the leaf tip (the 6th st)
- The stem has 300 ch and each rail has 294 sts
- The top bar has 15 sts and sits level with stem ch 294
- The point is centered and the loop has 24 ch
- Width is 3.5 in (8.9 cm) and length is 78 in (198.1 cm) including the loop
- All points hang level on the rod
- All tails are woven in and secure
Troubleshooting
The rails bow outward or ripple. Your rail chains are looser than your stem chains. Rework the rail with ch 12 between leaf tips, or use a hook one size smaller for the rails.
The leaves curl or cup. Your fan stitches are too tight. Loosen your dc tension, or rework the leaf with 2 more ch in the loop (ch 9) while keeping 11 sts.
The strip grows longer after hanging. This is common with cotton. Measure after 24 hours. If the strip is more than 1 in (2.5 cm) too long, take out the bottom rail tails and shorten them.
Strips hang at different heights. Compare the loops. Redo any loop that is longer than 24 ch.
The leaf pair twists around the stem. Both leaves must be anchored in the same base chain. Check that you did not sl st into the next chain up.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat or hanging. Do not tumble dry, because the heat and weight will stretch the chains.

Final Notes
Everything in this curtain is measured off the stem. The chain gauge is 16 ch = 4 in (10.2 cm). The leaf pairs are 14 ch (3.5 in / 8.9 cm) apart, and the rails repeat the same 14-st sections. The stem ends at 300 ch, 75 in (190.5 cm), and the loop brings each strip to 78 in (198.1 cm). Seven strips of 3.5 in (8.9 cm) with 1.25 in (3.2 cm) gaps fill a 32 in (81.3 cm) doorway. Check your gauge and you can trust the rest of the numbers.
Happy crocheting!