This cheerful armchair caddy keeps the remote, your phone and your reading glasses close at hand. Six cream pockets in two rows sit on a soft light blue back panel. A smiling snowman peeks over the top, wearing a fringed red scarf, with a red snowflake medallion on each side.
The colors are light blue, cream, cherry red, carrot orange and black, with small touches of white and pink. Moss stitch gives the panel and pockets a pebbly, knit-like texture, and a smooth single crochet edge frames every piece.
This pattern uses US crochet terms. The finished caddy measures 12.25 in (31.1 cm) wide and 18 in (45.7 cm) tall from the bottom edge to the top of the snowman’s head. The bordered back panel alone measures 12.25 x 15 in (31.1 x 38.1 cm).
You’ll work a moss stitch back panel and give it a two-round border. Then you’ll make six pockets and a shoulder band in the same stitch, followed by the snowman head and the small trims. Everything is sewn together at the end.
Finished Size and Construction
- Finished size: 12.25 x 18 in (31.1 x 45.7 cm), including the head
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4)
- Hook: 5.0 mm (H-8)
- Number of pieces: 20 (1 panel, 6 pockets, 1 band, 1 head, 1 nose, 2 eyes, 2 scarf pieces, 2 snowflakes, 2 cords, 2 balls)
- Pocket layout: 3 across x 2 down
- Pocket size: 3.25 x 4.25 in (8.3 x 10.8 cm)
- Panel size before border: 11.25 x 14 in (28.6 x 35.6 cm)
- Border depth: 0.5 in (1.3 cm), 2 rounds
Materials
Use a smooth worsted weight acrylic or cotton-acrylic blend. Acrylic keeps its shape on an armrest and washes easily. The quantities below include a margin of about 15 percent.
- Light blue: 140 g (280 m), for the panel, band, head rim and cords
- Cream: 70 g (140 m), for the pockets, face and balls
- Red: 20 g (40 m), for the scarf and snowflakes
- Orange: 5 g (10 m), for the nose
- Black: 5 g (10 m), for the eyes and smile
- White: 2 g (4 m), for the snowflake embroidery
- Pink: a 1 m scrap, for the cheeks
Tools:
- 5.0 mm (H-8) crochet hook
- Tapestry needle
- Stitch markers
- Rustproof pins and a blocking mat
- A little fiberfill
- Scissors and a tape measure
- Optional: two 9 mm black safety eyes
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sc2tog – single crochet 2 together
- sk – skip
- sp – space
- st(s) – stitch(es)
- BLO – back loop only
- MR – magic ring
Special stitch: Moss Pattern (odd number of sts). Every sc and every ch-1 counts as 1 st. R = (total sts − 3) ÷ 2.
- Row A: Ch 1, turn. Sc in first sc, ch 1, sk next sc, sc in next ch-1 sp. Rep from * for R repeats in total. Ch 1, sk next sc, sc in last sc.
- Row B: Ch 1, turn. Sc in first sc, sc in next ch-1 sp, ch 1, sk next sc, sc in next ch-1 sp. Rep from * for R repeats in total. Sc in last sc.
R = 21 for 45 sts and R = 4 for 11 sts. Alternating Row A and Row B staggers the stitches into the moss texture.
Gauge and Checkpoints
Gauge: 16 sts and 16 rows = 4 in (10.2 cm) in Moss Pattern, which is 4 sts and 4 rows per inch.
Make one pocket first as your gauge test. It’s small and uses the same stitch as the panel.
Checkpoints:
- Pocket before edging: 2.75 x 3.75 in (7.0 x 9.5 cm)
- Pocket after edging: 3.25 x 4.25 in (8.3 x 10.8 cm)
- Panel after Row 20: 11.25 x 5 in (28.6 x 12.7 cm)
- Panel after Row 56: 11.25 x 14 in (28.6 x 35.6 cm)
- Panel after border: 12.25 x 15 in (31.1 x 38.1 cm)
- Face after Round 7: 3.5 in (8.9 cm) across
If your pieces come out too big, go down 0.5 mm in hook size. If they’re too small, go up 0.5 mm. Check again before you continue.

Back Panel
With light blue, ch 46.
Row 1: Sc in 2nd ch from hook, ch 1, sk next ch, sc in next ch. Rep from * for 22 repeats in total. (45 sts: 23 sc, 22 ch-1 sps)
Row 2: Work Row B. (45 sts: 24 sc, 21 ch-1 sps)
Row 3: Work Row A. (45 sts: 23 sc, 22 ch-1 sps)
Rows 4–56: Alternate Row B on even rows and Row A on odd rows, ending with Row B. (45 sts per row)
Don’t fasten off. The panel should measure 11.25 x 14 in (28.6 x 35.6 cm). Work the Border section now, before you sew anything onto the panel.
Pockets (make 6)
With cream, ch 12.
Row 1: Sc in 2nd ch from hook, ch 1, sk next ch, sc in next ch. Rep from * for 5 repeats in total. (11 sts: 6 sc, 5 ch-1 sps)
Rows 2–15: Alternate Row B on even rows and Row A on odd rows, ending with Row A. (11 sts per row)
Edging Round: Ch 1, turn.
– Top edge: 3 sc in first st, sc in next 9 sts, 3 sc in last st.
– First side: sc in each of the next 13 row ends (Rows 14–2).
– Bottom edge, working into the foundation ch: 2 sc in first ch, sc in next 9 ch, 2 sc in last ch.
– Second side: sc in each of the next 13 row ends.
– Join with a sl st. (54 sc)
The 2-sc bottom corners turn more gently than the 3-sc top corners. That gives each pocket its rounded base and square opening. Fasten off and leave a 24 in (61.0 cm) tail for sewing.
Shoulder Band
With light blue, ch 46. Work Row 1 as for the Back Panel. (45 sts)
Rows 2–9: Alternate Row B and Row A, ending with Row A. (45 sts per row) The band should measure 11.25 x 2.25 in (28.6 x 5.7 cm).
Edging Round: Ch 1, turn.
– Top edge: 2 sc in first st, sc in next 43 sts, 2 sc in last st.
– First side: sc in each of the next 7 row ends.
– Bottom edge, in the foundation ch: 2 sc in first ch, sc in next 43 ch, 2 sc in last ch.
– Second side: sc in each of the next 7 row ends.
– Join. (108 sc)
The 2-sc corners round off the band’s ends. The band now measures 11.75 x 2.75 in (29.8 x 7.0 cm). Fasten off and leave a long tail.
Snowman Head
With cream, work in continuous rounds and mark the first st of each round.
- Round 1: MR, 6 sc. (6)
- Round 2: 2 sc in each st. (12)
- Round 3: Sc 1, 2 sc in next 6 times. (18)
- Round 4: Sc 2, 2 sc in next 6 times. (24)
- Round 5: Sc 3, 2 sc in next 6 times. (30)
- Round 6: Sc 4, 2 sc in next 6 times. (36)
- Round 7: Sc 5, 2 sc in next 6 times. (42)
The face should measure 3.5 in (8.9 cm) across. Change to light blue.
- Round 8: Sc 6, 2 sc in next 6 times. (48)
- Round 9: Sc 7, 2 sc in next 6 times. (54)
Join with a sl st. The head now measures 4.5 in (11.4 cm) across.
Eyes (make 2): With black, MR, 6 sc, join. (6) You can use 9 mm safety eyes instead.
Nose:
– Round 1: With orange, MR, 4 sc. (4)
– Round 2: Sc 1, 2 sc in next twice. (6)
– Rounds 3–4: Sc around. (6)
Fasten off. Don’t stuff the nose.
Face details:
1. Sew the eyes on Round 4, 4 sts apart.
2. Sew the nose just below center, pointing sideways.
3. Backstitch a black smile across Round 5.
4. Add a few pink satin stitches on each cheek.
Scarf
Neck piece: With red, ch 19.
– Row 1: Sc in 2nd ch from hook and in each ch across. (18)
– Rows 2–5: Ch 1, turn, sc BLO in each st. (18)
The neck piece measures 4.5 x 1.25 in (11.4 x 3.2 cm).
Tail: With red, ch 13.
– Row 1: Sc in 2nd ch from hook and in each ch across. (12)
– Rows 2–4: Ch 1, turn, sc BLO in each st. (12)
The tail measures 3 x 1 in (7.6 x 2.5 cm).
Fringe: Cut 8 red strands, each 3 in (7.6 cm) long. Fold 2 strands in half and knot them through each of the 4 row ends on one short edge of the tail. Trim the fringe to 1 in (2.5 cm).
Snowflakes (make 2)
- Round 1: With red, MR, 6 sc. (6)
- Round 2: 2 sc in each st. (12)
- Round 3: (Hdc, dc, hdc) in next st, sl st in next st 6 times. (6 petals)
Each snowflake measures about 1.75 in (4.4 cm) across. With white, embroider three straight stitches crossing at the center to make six spokes. Add a small V at the tip of each spoke.
Cords and Balls (make 2 each)
Cord: With light blue, ch 36. Sl st in the back bump of the 2nd ch from hook and in each ch across. (35 sl sts) The cord measures about 7 in (17.8 cm).
Ball:
– Round 1: With cream, MR, 6 sc. (6)
– Round 2: 2 sc in each st. (12)
– Round 3: Sc around. (12)
– Stuff lightly.
– Round 4: Sc2tog 6 times. (6)
Close the ball and sew it to one end of a cord. It measures about 1 in (2.5 cm).
Make All Pieces
- Light blue: 1 panel, 1 band, head rim, 2 cords
- Cream: 6 pockets, 1 face, 2 balls
- Red: 1 neck piece, 1 tail, 2 snowflakes
- Orange: 1 nose
- Black: 2 eyes
Layout (front view):
[ HEAD ]
[ * ===== BAND ===== * ]
| scarf tail |
| [P1] [P2] [P3] |
| [P4] [P5] [P6] |
Joining
Border the panel first (see the next section). Then whipstitch the pieces on with matching yarn tails.
Pocket placement: Measure from the panel body, inside the border.
– Place the bottom pocket row 0.75 in (1.9 cm) above the bottom edge.
– Leave 0.75 in (1.9 cm) between the two rows.
– Leave 0.375 in (1.0 cm) between pockets and at each side. Across one row: 3 x 3.25 in + 4 x 0.375 in = 11.25 in (28.6 cm), which is exactly the panel body width.
Stitch-to-stitch logic:
– Bottom edge: Each pocket bottom has 13 sc (2 + 9 + 2) and spans 3.25 in. That equals 13 panel sts at 4 sts per inch, so sew one pocket st to one panel st.
– Sides: The edging has 1 sc per moss row, and the panel has 1 row per 0.25 in. Sew one pocket st to one panel row.
– Pin the corners first, and leave the top edge open.
Tension: Pull each stitch snug but not tight, so the seam lies flat without puckering the panel.
Topper:
1. Line up the band’s top edge with the panel’s top border, and sew the band on all the way around.
2. Center the head on the band’s top edge so the lower 1.5 in (3.8 cm) overlaps the band, then sew it on.
3. Sew the neck piece across the base of the face.
4. Tuck the scarf tail under the right side of the neck piece and sew it on so the fringe hangs over the upper pockets.
5. Sew one snowflake on each side of the head.
6. Attach a cord at each bottom corner of the band.
Size checkpoint: The caddy measures 12.25 x 18 in (31.1 x 45.7 cm) overall.
Border
Border gauge: 4 sc per inch across stitches, and 1 sc per row end (4 rows per inch). The border matches the body gauge on all four sides, so it won’t ruffle or pull in.
Continue with the light blue still attached after Row 56.
Round 1: Ch 1, turn.
– Top edge: 3 sc in first st, sc in next 43 sts, 3 sc in last st.
– First side: 1 sc in each row end, Rows 55–2. (54 sc)
– Bottom edge, in the foundation ch: 3 sc in first ch, sc in next 43 ch, 3 sc in last ch.
– Second side: 1 sc in each row end, Rows 2–55. (54 sc)
– Join. (206 sc)
Counting from corner-center sc to corner-center sc inclusive gives 47 sts on the top and bottom and 58 sts on each side. Check: 2 x 47 + 2 x 58 − 4 shared corners = 206.
Round 2: Ch 1. Sc in each st around, with 3 sc in each corner-center sc. Join. (214 sc)
Counting the same way gives 49 sts on the top and bottom and 60 on each side. Check: 2 x 49 + 2 x 60 − 4 = 214.
Why the math works:
– Width: 45 body sts + 2 border sts on each side = 49 sts. At 4 per inch, that’s 12.25 in (31.1 cm).
– Height: 56 rows + 2 border rounds at each end = 60. At 4 per inch, that’s 15 in (38.1 cm).
Fasten off and weave in ends.
Final Blocking
- Pin the panel to 12.25 x 15 in (31.1 x 38.1 cm), easing the corners into soft curves.
- Pin each pocket to 3.25 x 4.25 in (8.3 x 10.8 cm) and the band to 11.75 x 2.75 in (29.8 x 7.0 cm).
- Mist with water until damp, not soaked.
- Let everything dry completely, for at least 12 hours.
- Unpin and assemble. If needed, hover steam over the finished caddy. Never press acrylic.
Final Quality-Control Checklist
- The panel measures 12.25 x 15 in (31.1 x 38.1 cm) with straight edges.
- All six pockets are the same size, aligned and open at the top.
- Pocket seams lie flat with no puckers.
- The head is centered and rises 3 in (7.6 cm) above the band.
- The scarf, snowflakes and face details are secure.
- The cords and balls are firmly attached.
- All ends are woven in at least 2 in (5.1 cm).
Troubleshooting
- Panel slants: Start and end every row with a sc in the edge sc, and recount to 45 sts.
- Moss texture stacks instead of staggering: Alternate Row A and Row B. Never work the same row type twice in a row.
- Border ruffles: You added extra sc on a side. Recount to 54 row-end sc per side.
- Border cups: Your tension is tight. Go up 0.5 mm for the border only.
- Pockets gape: Sew the side seams all the way up to the top corners.
Care
Hand wash in cool water with mild soap and lay flat to dry. Reshape the pockets and head while they’re damp.

Final Notes
Everything comes from one measurement chain:
– A gauge of 4 sts and 4 rows per inch gives an 11.25 x 14 in (28.6 x 35.6 cm) panel.
– The two-round border brings the panel to 12.25 x 15 in (31.1 x 38.1 cm).
– Six 3.25 x 4.25 in (8.3 x 10.8 cm) pockets fit the panel width exactly.
– The 4.5 in (11.4 cm) head, sewn with 3 in (7.6 cm) above the band, brings the total height to 18 in (45.7 cm).
Check your gauge on the first pocket, and every later piece will fit.
Happy crocheting!