The Seashell Tier holder is a four-basket hanging organizer that holds one standard toilet roll in each tier. Each basket is soft cream with a band of dusty-blue shells and a scalloped rim. Two braided-look cream straps link the baskets and hang from a single wall peg or hook.
The colors are calm and suit most bathrooms: warm cream for the structure and a light blue for the shell band. The overall look is cottage style, simple and tidy, with a little seaside detail.
This pattern uses US crochet terms. Each basket measures about 5.5 in (14.0 cm) across and 3.25 in (8.3 cm) tall at the scallop peaks. Hung, the holder is about 23 in (58.4 cm) long.
You work each basket base in joined rounds of single crochet. Then you build straight walls, add one blue shell round, one cream follow-up round, and a scalloped rim. You make the straps separately as slip-stitch cords and sew them to both sides of every basket.
Finished Size and Construction
- Finished size (hung): about 23 in (58.4 cm) long × 5.5 in (14.0 cm) wide
- Skill level: Easy / Advanced Beginner
- Terminology: US
- Yarn weight: Worsted / Aran (#4)
- Hooks: 4.5 mm (US 7) for baskets; 5.5 mm (US I-9) for straps
- Number of pieces: 6 (4 baskets + 2 straps)
- Layout: 4 baskets stacked in a single column, 1.5 in (3.8 cm) apart
- Piece size: each basket 5.5 in (14.0 cm) diameter × 3.25 in (8.3 cm) tall
- Size before border (scalloped rim): 5.5 in (14.0 cm) × 2.75 in (7.0 cm) tall
- Border depth: 0.5 in (1.3 cm)
Materials
Pick a smooth cotton or cotton blend in worsted weight. Cotton holds its shape well and handles bathroom humidity. Acrylic also works, but your baskets will be softer.
- Color A, Cream: 160 g, about 290 m (320 yd)
- Color B, Dusty Blue: 30 g, about 55 m (60 yd)
The quantities include a margin of roughly 20% for gauge swatches and differences in tension.
Tools:
– 4.5 mm (US 7) crochet hook
– 5.5 mm (US I-9) crochet hook
– Stitch markers (at least 10)
– Tapestry needle
– Scissors
– Measuring tape
– Pins and a spray bottle for blocking
– A wall peg or hook
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- inc: 2 sc in the same stitch
- BLO: back loop only
- st(s): stitch(es)
- sk: skip
- rnd: round
Special stitch: Shell. Work 5 dc in the same stitch.
Joining rounds: In every round, the starting ch 1 does not count as a stitch. Close each round with a sl st into the first stitch.
Gauge and Checkpoints
Gauge: 14 sc and 15 rnds = 4 in (10.2 cm) with the 4.5 mm hook.
Strap gauge: 4 sl sts = 1 in (2.5 cm) with the 5.5 mm hook and the yarn held double.
Make one complete basket before you start the others. It acts as your full-size swatch.
Checkpoints:
– After Rnd 5: the base is about 2.75 in (7.0 cm) across.
– After Rnd 10: the base is 5.5 in (14.0 cm) across and lies flat.
– After Rnd 17: the wall is about 1.9 in (4.8 cm) tall from the ridge.
– After Rnd 19: the wall is 2.75 in (7.0 cm) tall.
– After Rnd 20: the basket is 3.25 in (8.3 cm) tall at the scallop peaks.
If the base is too big (more than 5.75 in / 14.6 cm), go down half a hook size. If it’s too small (under 5.25 in / 13.3 cm), go up half a size. A standard roll is about 4.5 in (11.4 cm) wide, so test the fit once the walls are a few rounds high.

Basket (Make 4)
Base
Work with Color A and the 4.5 mm hook.
Rnd 1: Make a magic ring. Ch 1, 6 sc in the ring, sl st to join. (6 sts)
Rnd 2: Ch 1, inc in each st around. (12 sts)
Rnd 3: Ch 1, sc in next st, inc in next st; repeat from * around. (18 sts)
Rnd 4: Ch 1, sc in next 2 sts, inc; repeat around. (24 sts)
Rnd 5: Ch 1, sc in next st, inc, sc in next 3 sts, inc; repeat from * 4 more times, sc in last 2 sts. (30 sts)
Rnd 6: Ch 1, sc in next 4 sts, inc; repeat around. (36 sts)
Rnd 7: Ch 1, sc in next 2 sts, inc, sc in next 5 sts, inc; repeat from * 4 more times, sc in last 3 sts. (42 sts)
Rnd 8: Ch 1, sc in next 6 sts, inc; repeat around. (48 sts)
Rnd 9: Ch 1, sc in next 3 sts, inc, sc in next 7 sts, inc; repeat from * 4 more times, sc in last 4 sts. (54 sts)
Rnd 10: Ch 1, sc in next 8 sts, inc; repeat around. (60 sts)
Each round adds 6 stitches. The staggered increases keep the base round instead of hexagonal. Check that it lies flat and measures 5.5 in (14.0 cm) across.
Walls
Rnd 11: Ch 1, sc in BLO of each st around. (60 sts)
This round leaves a crisp ridge of unworked front loops, which makes the base-to-wall corner sharp. Later you’ll sew the straps to this ridge.
Rnds 12–17: Ch 1, sc in each st around. (60 sts)
The walls now rise straight up. After Rnd 17, fasten off Color A.
Shell Band
Rnd 18 (Color B): Join B in any st. Ch 1, sc in the same st, sk 2 sts, Shell in next st, sk 2 sts, sc in next st. Repeat from * around, ending the last repeat with sk 2 sts. Sl st to the first sc. (10 shells: 50 dc + 10 sc = 60 sts)
Each shell plus the sc after it uses exactly 6 stitches. Since 60 ÷ 6 = 10, the repeats close evenly. Fasten off B.
Wave Round
Rnd 19 (Color A): Join A in any sc between two shells (the “valley”). Ch 1, sc in the same st and in each st around. (60 sts)
Work into the shell stitches without levelling them. The round follows the shell tops, so the cream band waves the way it does in the finished piece.
Make All Pieces
Make 4 baskets (shown above) and 2 straps (shown below).
Straps (Make 2)
Use the 5.5 mm hook and hold two strands of Color A together.
Row 1: Ch 105. Sl st in the back bump of the 2nd ch from the hook and in each ch across. (104 sl sts)
The strap should measure about 26 in (66.0 cm). Working into the back bumps gives the cord its braided-look ridge. Fasten off and leave a 12 in (30.5 cm) tail at each end.
End loops: Bend the last 6 sts at one end into a ring and sew the tip to st 7. Do the same at the other end. Each loop is about 0.75 in (1.9 cm) long. The strap now measures 23 in (58.4 cm), or 92 sts between the two loop joins.
Quantities per color:
– Color A: 4 baskets (bases, walls, Rnds 19–20) + 2 straps
– Color B: 4 shell rounds (Rnd 18 of each basket)
Layout grid (top to bottom):
[ peg ]
/ \ straps: 6 in (15.2 cm) to top loops
| Basket 4 | base at 14.25 in (36.2 cm)
| Basket 3 | base at 9.5 in (24.1 cm)
| Basket 2 | base at 4.75 in (12.1 cm)
| Basket 1 | base at 0 in (bottom loop join)
Joining
Method: Whipstitch the straps to the outside of each basket with matching cream yarn and a tapestry needle.
Marking the straps: Start at the bottom loop join and count sl sts up the strap. Place markers at 0, 11, 19, 30, 38, 49, 57, and 68 sts. At 4 sts per inch, these marks fall at 0, 2.75, 4.75, 7.5, 9.5, 12.25, 14.25, and 17 in (0, 7.0, 12.1, 19.1, 24.1, 31.1, 36.2, and 43.2 cm).
The pairs alternate base and rim. Each basket’s base sits 4.75 in (12.1 cm) above the one below it. That spacing is the 3.25 in (8.3 cm) basket height plus a 1.5 in (3.8 cm) gap.
Stitch-to-stitch logic: On each basket, mark two valley stitches in Rnd 19 that are exactly 30 sts apart (for example, st 1 and st 31). Because valleys repeat every 6 sts and 30 = 5 × 6, both marks land on valleys. Sewing there keeps the strap from flattening a scallop peak.
Below each valley mark, find the matching front loop on the Rnd 11 ridge.
Sewing each basket:
1. Line up the strap’s base marker with the Rnd 11 ridge. Whipstitch the strap over 3 ridge loops (the marked one plus one on each side).
2. Line up the next marker with Rnd 19. Whipstitch over the same 3 stitches.
3. Repeat on the opposite side with the second strap.
For the bottom basket, sew the bottom loop join itself to the ridge, so the loop sits flat at the base.
Tension: Make your stitches snug but not tight. Pulling too hard puckers the wall. If the stitches are too loose, the basket tilts once a roll is inside.
Size checkpoint: Above the top basket, 24 sts (6 in / 15.2 cm) of each strap should be free. Hang both top loops on the peg together. The holder should hang straight and measure about 23 in (58.4 cm) long.
Border
The border is the scalloped rim on each basket, worked straight on from Rnd 19.
Border gauge: The rim is 0.5 in (1.3 cm) deep and has 10 scallops. Each scallop spans 6 stitches, about 1.7 in (4.3 cm) of rim.
Rnd 20 (Color A): Do not turn. Sl st in the next st (valley), sc in the next st, hdc in the next st, 2 dc in the next st, hdc in the next st, sc in the next st. Repeat from * around and sl st to the first sl st. (60 sts worked 1 per st + 10 extra = 70 sts)
Fasten off and weave in the ends.
Why the math works: Rnd 19 keeps 60 stitches, one on top of each Rnd 18 stitch. So every scallop sits directly over one shell:
– The valley sl st sits above the valley sc.
– The 2-dc peak sits above the shell’s center dc.
The 10 extra stitches (one per scallop) give the peaks just enough room to round out without ruffling.
Final Blocking
- Dampen each basket lightly with the spray bottle.
- Put a toilet roll or a straight jar about 4.5–5 in (11.4–12.7 cm) wide inside to shape the walls.
- Press the base flat on a towel. Check that it’s 5.5 in (14.0 cm) across.
- Pinch each scallop peak into shape and pin it if needed.
- Straighten the straps and leave them to dry flat at 23 in (58.4 cm).
- Let everything dry completely before you assemble or hang it.
Final Quality-Control Checklist
- Each base lies flat and measures 5.5 in (14.0 cm).
- Each basket wall reaches 2.75 in (7.0 cm) after Rnd 19 and 3.25 in (8.3 cm) at the peaks.
- Every basket has 10 complete blue shells.
- Each scallop is centered above a shell.
- Both straps measure 23 in (58.4 cm) between the loop joins.
- The gap between baskets is 1.5 in (3.8 cm).
- The straps are sewn at valleys, 30 sts apart.
- All ends are woven in securely.
- The holder hangs level from a single peg.
Troubleshooting
Base curls up: Your tension is too tight, or you’ve missed an increase. Count each round, or go up half a hook size.
Base ruffles: You’ve added extra stitches. Recount to confirm 60 after Rnd 10.
Shells don’t close evenly: Rnd 17 doesn’t have 60 sts. Fix the count before you start the shells.
Scallops lean sideways: Rnd 20 started on a shell stitch instead of a valley. Restart from a valley sc.
Basket tilts when full: One side’s seam is looser. Re-sew it so both sides match.
Straps stretch: Use cotton and hold it double, and keep your slip stitches even.
Care
Hand wash in cool water, reshape, and dry flat. Avoid tumble drying, which can soften the walls and distort the scallops.

Final Notes
Your measurements build on each other in a simple chain:
– The 14-sc gauge gives a 60-stitch base that is 5.5 in (14.0 cm) across.
– The straight walls reach 2.75 in (7.0 cm), and the scalloped border brings each basket to 3.25 in (8.3 cm).
– Basket height plus a 1.5 in (3.8 cm) gap places the bases 4.75 in (12.1 cm) apart.
– The 23 in (58.4 cm) straps hold four tiers and leave 6 in (15.2 cm) for the hanging triangle.
Check each link and the finished holder will hang neatly. Happy crocheting!