This little tree ornament is made with rows of star stitches, so the body looks like a tight cluster of tiny golden stars. A crisp cream border follows each tier of the tree, and a small chocolate-brown trunk sits below it. A simple gold chain loop at the top lets it hang from a branch, a gift, or a garland hook.
The colors are warm and a little vintage: mustard gold for the body and loop, cream for the outline, and brown for the trunk. It looks right on a natural-wood or gold-and-white tree, and it also works as a gift tag or a package topper.
The pattern uses US crochet terms. The finished ornament is 3.75 in (9.5 cm) wide and 4.25 in (10.8 cm) tall without the loop. With the loop it is about 5.75 in (14.6 cm) tall.
Construction is simple. You crochet the tree body flat from the bottom up, alternating star rows and half double crochet rows and losing one star per tier. Then you add a two-round cream border all the way around, crochet the trunk into the bottom edge of the border, and finish with the hanging loop. The ornament is a single piece, so there’s no sewing or joining.
Finished Size and Construction
- Finished size: 3.75 in (9.5 cm) wide x 4.25 in (10.8 cm) tall, plus a 1.5 in (3.8 cm) loop
- Skill level: Intermediate (star stitch)
- Terminology: US crochet terms
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 4.5 mm (US 7)
- Number of pieces: 1 (single ornament, no joining)
- Layout: One tree with 6 tiers of 6, 5, 4, 3, 2, and 1 stars
- Body size before border: 3.25 in (8.3 cm) wide at the base x 3.0 in (7.6 cm) tall
- Border depth: 0.25 in (0.6 cm) on every edge
- Trunk: 1.25 in (3.2 cm) wide x 0.75 in (1.9 cm) tall
Materials
Choose a smooth worsted cotton or cotton blend that shows stitches clearly. Fuzzy or very splitty yarn will blur the star centers. Acrylic also works, but it may not block as flat as cotton.
- Color A, Mustard Gold (body and loop): 10 g / 20 m
- Color B, Cream (border): 4 g / 8 m
- Color C, Chocolate Brown (trunk): 3 g / 6 m
These amounts include a small safety margin for checking gauge and weaving in ends.
Tools:
- 4.5 mm (US 7) crochet hook
- Tapestry needle
- Scissors
- Stitch markers (2–3)
- Ruler or tape measure
- Blocking mat, rust-proof pins, and a spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- st(s) – stitch(es)
- RS – right side
- yo – yarn over
Special Stitch: Star (5-Loop Star Stitch)
First star of a row: Ch 3. Pull up a loop in the 2nd ch from hook and in the 3rd ch from hook. Then pull up a loop in the st at the base of the ch-3 and in each of the next 2 sts (6 loops on hook). Yo and draw through all 6 loops, then ch 1 to close. This ch-1 is the star’s eye. The first star uses 3 base sts.
Each following star: Pull up a loop in the eye of the previous star, in the back of the last loop of the previous star, in the same st as the last loop of the previous star, and in each of the next 2 sts (6 loops on hook). Yo and draw through all 6 loops, then ch 1 to close (eye). Each following star uses 2 new base sts.
Key rule: A row of n stars uses exactly (2 x n) + 1 base stitches.
Gauge and Checkpoints
Gauge: 8 sts = 2.0 in (5.1 cm) across an hdc row. One star row plus one hdc row = 0.5 in (1.3 cm) tall.
Use the ornament itself as your gauge test. Crochet Rows 1–4, then stop and measure:
- After Row 2: 13 sts, 3.25 in (8.3 cm) wide and 0.5 in (1.3 cm) tall.
- After Row 4: the second tier is 11 sts and 2.75 in (7.0 cm) wide, and the piece is 1.0 in (2.5 cm) tall.
- After Row 6: 1.5 in (3.8 cm) tall.
- After Row 12: 3.0 in (7.6 cm) tall.
- After the border: 3.75 in (9.5 cm) wide x 3.5 in (8.9 cm) tall.
- After the trunk: 4.25 in (10.8 cm) tall in total.
If your piece is too big, go down to a 4.0 mm hook. If it’s too small, go up to a 5.0 mm hook. When you pull up star loops, make each one the same height as the loop already on your hook. If the loops are too tight, the stars pucker. If they’re too loose, the stars look floppy.

Tree Body
Use Color A. You crochet the body flat in rows, starting at the base. The stars on odd rows face the RS.
Foundation: Ch 16.
Row 1 (RS, star row): Pull up a loop in the 2nd and 3rd ch from hook and in each of the next 3 ch (6 loops on hook). Yo, draw through all 6, ch 1 (first star made). Make 5 more stars across, working the last loop of the last star into the final ch. (6 stars over 13 base ch)
Before you go on, check that every star has a clear eye at its center. Those eyes are where the next row’s stitches go.
Row 2 (hdc row): Ch 2 (counts as hdc), turn. Hdc in the eye of the first star, 2 hdc in the eye of each of the next 5 stars, then hdc in the top of the starting ch at the end of the row. (13 sts: 1 + 1 + 10 + 1)
Row 3 (decrease star row): Turn. Skip the first st and sl st in the next st. Make the first star (the ch-3 starts from the sl st), then make 4 more stars. Leave the last st unworked. (5 stars over 11 sts; 1 st left exposed at each end)
The two unworked sts are the ledges. They make the steps between tiers, and the border goes into them later.
Row 4: Ch 2 (counts as hdc), turn. Hdc in the eye of the first star, 2 hdc in the eye of each of the next 4 stars, hdc in the top of the beginning ch-3. (11 sts)
Row 5: Turn, skip the first st, sl st in the next st, then make 4 stars. Leave the last st unworked. (4 stars over 9 sts)
Row 6: Ch 2, turn, hdc in the first eye, 2 hdc in each of the next 3 eyes, hdc in the top of the beginning ch-3. (9 sts)
Row 7: Turn, skip the first st, sl st in the next st, then make 3 stars. Leave the last st unworked. (3 stars over 7 sts)
Row 8: Ch 2, turn, hdc in the first eye, 2 hdc in each of the next 2 eyes, hdc in the top of the beginning ch-3. (7 sts)
Row 9: Turn, skip the first st, sl st in the next st, then make 2 stars. Leave the last st unworked. (2 stars over 5 sts)
Row 10: Ch 2, turn, hdc in the first eye, 2 hdc in the next eye, hdc in the top of the beginning ch-3. (5 sts)
Row 11: Turn, skip the first st, sl st in the next st, then make 1 star. Leave the last st unworked. (1 star over 3 sts)
Row 12: Ch 2 (counts as hdc), turn, hdc in the eye, hdc in the top of the beginning ch-3. (3 sts)
Fasten off and weave in the ends.
Tier widths (hdc rows): 13, 11, 9, 7, 5, and 3 sts. That’s 3.25 in (8.3 cm), 2.75 in (7.0 cm), 2.25 in (5.7 cm), 1.75 in (4.4 cm), 1.25 in (3.2 cm), and 0.75 in (1.9 cm). Each tier steps in by 1 st, or 0.25 in (0.6 cm), on each side.
Check now: the body should measure 3.25 in (8.3 cm) across the base and 3.0 in (7.6 cm) tall.
Border
Use Color B. Work with the RS facing.
Border gauge: One round of sc plus one round of sl st adds 0.25 in (0.6 cm) to every edge. Along the row ends, put 2 sc into the side of each star row and 1 sc into the side of each hdc row.
Round 1: Join Color B with a sl st in the first free loop of the foundation chain at one bottom corner. Work only into the 13 chains that hold stars. Ch 1.
- Bottom edge: 3 sc in the corner ch, sc in each of the next 11 ch, 3 sc in the last ch. (17 sc)
- First side: 2 sc in the side of Row 1 and 1 sc in the side of Row 2. Then, for each of the 5 upper tiers: 3 sc in the ledge st, 2 sc in the side of the star row, 1 sc in the side of the hdc row. (3 + 5 x 6 = 33 sc)
- Top: 3 sc in the first st of Row 12, sc in the middle st, 3 sc in the last st. (7 sc)
- Second side: For each of the 5 upper tiers on the way down: 1 sc in the side of the hdc row, 2 sc in the side of the star row, 3 sc in the ledge st. Then 1 sc in the side of Row 2 and 2 sc in the side of Row 1. (5 x 6 + 3 = 33 sc)
Join with a sl st to the first sc. (90 sc: 17 + 33 + 7 + 33)
Round 2: Don’t chain. Sl st loosely in each sc around. (90 sl st) Join to the first sl st and fasten off.
Why the math works: The bottom edge has 1 sc for each of the 13 foundation chains, plus 2 extra sc at each corner to turn it (13 + 4 = 17). Each tier side is 0.5 in (1.3 cm) tall, and 3 sc fit that height, so the 2-and-1 rhythm keeps the edge flat. The 3 sc in each ledge st push that corner outward, which gives the tree its scalloped tier outline. Both sides mirror each other, so each holds 33 sc. Round 2 goes 1 sl st into each sc, so the total stays at 90. Each corner’s sc are counted only once, in the segment they belong to.
Check now: 3.75 in (9.5 cm) wide x 3.5 in (8.9 cm) tall.
Trunk
Use Color C. With the RS facing and the tree upside down, find the 17 sl sts of the bottom edge. Count 6 sts in from each end to find the center 5 sts (6 + 5 + 6 = 17).
Row 1: Join Color C in the 7th st of the bottom edge. Ch 1, sc in the same st and in each of the next 4 sts. (5 sc)
Rows 2–4: Ch 1, turn, sc in each st across. (5 sc)
Fasten off. The trunk measures 1.25 in (3.2 cm) wide x 0.75 in (1.9 cm) tall, which brings the total height to 4.25 in (10.8 cm).
Hanging Loop
Use Color A. Join with a sl st in the center st at the top. That’s the 4th of the 7 top sts, right above the middle hdc of Row 12. Ch 16, then sl st in the same st. Fasten off, leaving a 6 in (15.2 cm) tail. Weave the tail down through the border and back up to hold the loop securely. The loop stands about 1.5 in (3.8 cm) tall.
Final Blocking
- Weave in all ends first, hiding each color in its own section.
- Lightly mist the ornament until it’s damp, not soaked.
- Lay it RS up on a blocking mat.
- Pin the bottom corners 3.75 in (9.5 cm) apart.
- Pin the top center 3.5 in (8.9 cm) above the bottom border edge.
- Pin each ledge bump outward so the tiers look even and match on both sides.
- Pull the trunk straight down and pin it square.
- Gently press each star center flat with your fingertip.
- Let it dry completely, at least 6 hours.
- Unpin it and shape the loop with your fingers.
Final Quality-Control Checklist
- The tiers have 6, 5, 4, 3, 2, and 1 stars.
- The hdc rows have 13, 11, 9, 7, 5, and 3 sts.
- There is exactly one exposed ledge st at each end of each upper tier.
- Border Round 1 totals 90 sc, with 33 sc on each side.
- The scallop bumps match on both sides.
- The trunk is centered, with 6 border sts on each side.
- The loop sits right over the tree’s center line.
- The ornament lies flat at 3.75 in (9.5 cm) x 4.25 in (10.8 cm).
Troubleshooting
Stars lean or twist: Always insert into the back of the last loop of the previous star, not the front.
A row comes out one star short: You probably skipped the eye. Count stars, not loops, before you start the hdc row.
The tiers don’t step in: Make sure you skipped the first st and left the last st unworked on every star row from Row 3 on.
The border ruffles: Your sc are too loose, or you added extra sc along the row ends. Stick to the 2-and-1 rhythm.
The border cups or pulls in: The sl st round is too tight. Work it more loosely, or use a hook one size larger for Round 2 only.
The trunk is off-center: Recount the bottom edge. The trunk has to start in the 7th of the 17 sts.
The piece curls: Block it damp and pin the ledges. Cotton relaxes well.
Care
Hand wash in cool water with a mild soap, press the water out in a towel, and dry flat. Reshape it while damp and store it flat between seasons.

Final Notes
Each measurement builds on the one before it. At 8 sts = 2.0 in (5.1 cm), the 13-st base is 3.25 in (8.3 cm) wide. Six tiers of 0.5 in (1.3 cm) make the 3.0 in (7.6 cm) body. The 0.25 in (0.6 cm) border brings the tree to 3.75 in (9.5 cm) x 3.5 in (8.9 cm), and the 0.75 in (1.9 cm) trunk brings the height to 4.25 in (10.8 cm). If your piece matches the Row 2 checkpoint, the rest will come out right.
Hang one on the tree, tie one to a gift, or keep one on your hook as a quick holiday project. Happy crocheting!