This holder looks like a slice of summer and keeps plastic bags tidy. The body is an open coral-pink mesh scattered with little black seeds. Each end has a solid dark green “rind” band with a ring of light green scallops. A slim dark green strap hangs it from any hook, and bags come out through the small round opening at the bottom.
The colors are coral pink, dark green, light green and black. The style is cheerful and graphic, and it suits a kitchen, pantry or laundry room. This pattern uses US crochet terms throughout.
The finished holder measures about 6 in (15.2 cm) wide laid flat and 18 in (45.7 cm) long, not counting the strap. The strap adds about 7 in (17.8 cm) of hanging height.
The construction is simple. You work the whole body in one piece from the bottom up: the bottom rind band, the bottom scallops, the pink mesh, then the top rind cuff. The top scallops are worked into front loops left free on the cuff. Last, you make the strap, sew it on, and wrap the black seeds onto the mesh.
Finished Size and Construction
- Finished size: 6 in (15.2 cm) wide flat x 18 in (45.7 cm) long; 12 in (30.5 cm) circumference
- Skill level: Easy / Advanced Beginner
- Terminology: US crochet terms
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 5.0 mm (H-8)
- Number of pieces: 1 main body + 1 strap (the strap is a small part sewn to the body; there are no repeated motifs)
- Layout: One vertical tube, open at both ends
- Bottom opening: 7.5 in (19.1 cm) circumference, about 2.4 in (6.1 cm) across
- Size before border (top cuff): about 16.9 in (42.9 cm) long
- Border (top cuff) depth: about 1.1 in (2.8 cm), with scallops hanging about 0.5 in (1.3 cm) over the mesh
Materials
Cotton is the best choice. It holds its shape, doesn’t stretch out under the weight of the bags, and washes well. Pick a crisp coral or watermelon pink, a deep leafy green, a bright lime or apple green, and black.
- Coral pink (mesh): 70 g / 120 m
- Dark green (rind bands and strap): 45 g / 77 m
- Light green (scallops): 20 g / 34 m
- Black (seeds): 5 g / 9 m
Tools:
- 5.0 mm (H-8) crochet hook
- Tapestry needle
- Scissors
- Stitch marker
- Measuring tape
- Spray bottle and a rolled towel for blocking
All quantities include a margin of about 15% for a gauge swatch and weaving in ends.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sk – skip
- st(s) – stitch(es)
- BLO – back loop only
- FLO – front loop only
- rnd – round
- rep – repeat
Special stitch – Shell: work 5 dc in the same stitch.
Scallop repeat: sc in next st, sk 1 st, shell in next st, sk 1 st. Each repeat uses 4 stitches and makes one scallop.
Gauge and Checkpoints
- Sc gauge: 16 sts x 18 rnds = 4 in (10.2 cm)
- Mesh gauge: 3 ch-6 loops = 3 in (7.6 cm) measured flat along a round, and 5 mesh rnds = 4 in (10.2 cm) tall, so each mesh rnd is about 0.8 in (2.0 cm)
Test first: work Rnds 1–8 of the bottom band and measure it before you go on. This band sets the width of the whole holder.
Checkpoints:
- After Rnd 8: 6 in (15.2 cm) wide flat, about 1.75 in (4.4 cm) tall.
- After Rnd 10: the scallop band adds about 0.75 in (1.9 cm).
- After Rnd 28: the mesh is about 14.4 in (36.6 cm) tall when hanging lightly, and the body is about 16.9 in (42.9 cm) long.
- After Rnd 33: the full length is 18 in (45.7 cm) and the cuff is 6 in (15.2 cm) wide flat.
If your band is too wide: go down half a hook size, to 4.5 mm.
If your band is too narrow: go up to 5.5 mm (I-9).
If the mesh is too long or too short: check mesh height separately and add or remove whole mesh rounds. Each round adds or removes about 0.8 in (2.0 cm).

Bottom Rind Band (Dark Green)
Foundation: With dark green, ch 30. Sl st to the first ch to join, taking care not to twist the chain.
Rnd 1: Ch 1, sc in each ch around, sl st to first sc to join. (30 sc)
Rnd 2: Ch 1, sc in each st around, join. (30 sc)
At this point the opening is 7.5 in (19.1 cm) around. This is the dispensing hole.
Rnd 3: Ch 1, sc in next 4 sts, 2 sc in next st; rep from * 6 times total, join. (36 sc)
Rnd 4: Ch 1, sc in next 5 sts, 2 sc in next st; rep from * 6 times total, join. (42 sc)
Rnd 5: Ch 1, sc in next 6 sts, 2 sc in next st; rep from * 6 times total, join. (48 sc)
Rnds 6–8: Ch 1, sc in each st around, join. (48 sc each rnd)
Rounds 3–5 make the gentle taper you see at the bottom of the holder. The 48 sc are 12 in (30.5 cm) around at 4 sts per inch, so the band lies 6 in (15.2 cm) wide flat.
Fasten off dark green.
Bottom Scallops (Light Green)
Rnd 9: Join light green in any st. Ch 1, sc in each st around, join. (48 sc)
Rnd 10: Ch 1, sc in next st, sk 1, shell in next st, sk 1; rep from * 12 times total, sl st to first sc. Fasten off.
Rnd 10 count: 12 sc + 60 dc = 72 sts, making 12 scallops. Each scallop repeat uses 4 base stitches, and 12 x 4 = 48, so the round closes exactly. These scallops point upward, toward the pink mesh.
Watermelon Mesh (Coral Pink)
Each shell has 5 dc, and its 3rd dc is the center top of the scallop.
Rnd 11: Join coral pink with a sc in the 3rd dc of any shell. Ch 6, sc in the 3rd dc of next shell; rep from * 11 times. Ch 3, dc in first sc to join. (12 loops)
The ch-3 plus dc counts as the 12th ch-6 loop. It also leaves your hook in the middle of that loop, ready for the next round.
Rnds 12–28: Ch 1, sc in the loop formed by the joining dc. Ch 6, sc in next ch-6 loop; rep from * 11 times. Ch 3, dc in first sc to join. (12 loops each rnd)
That makes 18 mesh rounds in total (Rnds 11–28). Every round has exactly 12 loops. There are no increases or decreases, so the mesh stays the same width as the bands: 12 loops x 1 in (2.5 cm) = 12 in (30.5 cm) around.
Checkpoint: Hang the piece from the last round. The mesh should measure about 14.4 in (36.6 cm) and the whole body about 16.9 in (42.9 cm).
Fasten off coral pink.
Border: Top Rind Cuff and Top Scallops
The cuff is the finishing border. It firms up the top edge, closes the mesh, and holds the strap.
Border gauge: same as the bottom band, 16 sc x 18 rnds = 4 in (10.2 cm).
Rnd 29: Join dark green in any ch-6 loop. Ch 1, work 4 sc in each loop around, including the ch-3/dc loop, join. (48 sc)
Laid flat, that is 24 sc on the front side and 24 sc on the back side. A tube has no corners, so there are no corner stitches to count.
Rnd 30 (BLO): Ch 1, sc in the back loop only of each st around, join. (48 sc; 24 per flat side)
This leaves the front loops of Rnd 29 free for the top scallops.
Rnds 31–33: Ch 1, sc in each st around, join. (48 sc each rnd; 24 per flat side)
Fasten off. The cuff is 5 rounds tall, about 1.1 in (2.8 cm).
Top scallops (Rnd S): Hold the holder with the cuff at the top. Join light green in any free front loop of Rnd 29. Ch 1, sc in next FLO, sk 1, shell in next FLO, sk 1; rep from * 12 times total, sl st to first sc. Fasten off.
Rnd S count: 12 sc + 60 dc = 72 sts, making 12 scallops, 6 per flat side. Because they grow from the front loops at the bottom of the cuff, the shells fold down and hang about 0.5 in (1.3 cm) over the top of the pink mesh. This is the downward-pointing frill you see in the photo.
Why the math works: Each of the 12 loops gets 4 sc, so 12 x 4 = 48 sts. That matches the 48 sts of the bottom band exactly, so the top and bottom rinds are the same width: 12 in (30.5 cm) around and 6 in (15.2 cm) flat. The scallops use 4 sts each, and 48 / 4 = 12 scallops. That lines up with the 12 bottom scallops and the 12 mesh columns.
Strap (Dark Green)
Foundation: Ch 65.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (64 sc)
Row 2: Ch 1, sc in each st across. (64 sc)
Fasten off and leave a 12 in (30.5 cm) tail at each end.
The strap is 16 in (40.6 cm) long and about 0.5 in (1.3 cm) wide.
Attach the strap:
- Flatten the cuff and place a marker at stitch 1 and stitch 25 of Rnd 33. These two points are exactly opposite each other, 24 sts apart.
- Lay 1 in (2.5 cm) of each strap end down the inside of the cuff at a marker.
- Whipstitch each end securely through Rnds 30–33.
This leaves 14 in (35.6 cm) of free strap, which forms a loop about 7 in (17.8 cm) high.
Seeds (Black)
The seeds are wrapped onto the sc points where the mesh loops meet. Each seed is a small teardrop about 0.4 in (1.0 cm) long, narrow end up.
- Thread an 18 in (45.7 cm) length of black yarn onto the tapestry needle.
- Anchor it at the back of a sc point.
- Wrap 4–5 satin stitches over the sc and the 0.25 in (0.6 cm) of chain just below it. Keep the stitches close together at the top and fan them slightly wider at the bottom to make the teardrop.
- Knot the yarn inside the tube and trim.
Placement: Number the 12 sc points in each round 1–12, starting from the joining point.
- Rnds 13, 19 and 25: seeds on sc points 1, 3, 5, 7, 9 and 11.
- Rnds 16 and 22: seeds on sc points 2, 4, 6, 8, 10 and 12.
That gives 5 rounds x 6 seeds = 30 seeds in a staggered pattern all around the holder.
Final Blocking
- Weave in all ends inside the tube, following the stitches of the same color.
- Roll a towel to about 4 in (10.2 cm) across and slide it into the holder so it fills the mesh.
- Spray the whole piece until it is evenly damp, not soaked.
- Pull the mesh gently lengthwise until the diamonds are even and the mesh measures 14.4 in (36.6 cm).
- Fold the top scallops down over the mesh and pinch each shell into a neat curve. Lift the bottom scallops so they point up.
- Lay the holder flat to dry completely, then remove the towel.
Final Quality-Control Checklist
- [ ] Bottom band is 48 sc and 6 in (15.2 cm) wide flat.
- [ ] Bottom opening is 7.5 in (19.1 cm) around.
- [ ] Both scallop rounds have 12 shells (72 sts).
- [ ] Every mesh round has exactly 12 loops.
- [ ] The top cuff is 48 sc (24 per flat side) and matches the bottom band’s width.
- [ ] The top scallops hang down and the bottom scallops point up.
- [ ] The strap ends sit exactly opposite each other and are sewn through 4 rounds.
- [ ] There are 30 seeds, staggered, all pointing narrow end up.
- [ ] Total length is 18 in (45.7 cm) without the strap.
Troubleshooting
The mesh slants or spirals. You probably skipped the ch-3/dc join. Without it the round start drifts. Join the same way every round.
The mesh is wider than the bands. Your chains are loose. Use a hook half a size smaller for the mesh, or work ch 5 instead of ch 6 and add 1–2 extra mesh rounds to keep the length.
The top cuff ruffles. Work 3 sc in each loop for Rnd 29 instead of 4, which gives 36 sts. In that case, work 9 scallops on the top and sew the strap at stitches 1 and 19.
The bottom opening is too tight for bags. Start with ch 34 and work 34 sc. On Rnd 3, use (sc 15, 2 sc in next) twice, then work (sc 6, 2 sc in next) six times on Rnd 4. That gives 36 sts, then 42 sts… adjust the next increase so that you reach 48 sts by Rnd 5.
The seeds slide along the chain. Catch the sc itself in at least two of the wraps.
The scallops curl. Steam lightly and pin them while they dry.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and lay flat to dry. Reshape the scallops while the holder is still damp.

Final Notes
The measurements build on each other:
- The 48-stitch bottom band sets a 12 in (30.5 cm) circumference.
- The 12 shells pass that width straight to 12 mesh loops.
- The 12 loops x 4 sc bring the top cuff back to exactly 48 stitches.
- The 18 mesh rounds at 0.8 in (2.0 cm) each, plus the two rinds, give a finished length of 18 in (45.7 cm).
Check the measurement at each checkpoint and the holder will come out straight, even, and ready to hang.
Happy crocheting!