These six-pointed star coasters have a warm, cookie-like look: a soft cream center, an oatmeal outer zone textured with puff stitches, and a twisted gold edge that frames every point. Six coasters stack into a matching hexagonal holder that is trimmed with little holly sprays.
The palette is cream, oatmeal beige and golden mustard. It feels cozy and festive without looking loud.
This pattern uses US crochet terms. Each finished coaster measures 5.25 in (13.3 cm) from point to point and 4 in (10.2 cm) from valley to valley. The holder measures 5.8 in (14.7 cm) from corner to corner and 2 in (5.1 cm) tall.
Each coaster is worked in joined rounds: a dc circle, a puff round, a single round of six points, and a two-round border. The holder is a single crochet hexagon base with back-loop walls and a front notch shaped in rows. The leaves and berries are made separately and sewn on.
Finished Size and Construction
- Coaster size: 5.25 in (13.3 cm) point to point; 4 in (10.2 cm) valley to valley
- Holder size: 5.8 in (14.7 cm) corner to corner, 5 in (12.7 cm) flat to flat, 2 in (5.1 cm) tall
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: DK (light worsted, #3)
- Hook: 3.5 mm (E-4)
- Number of pieces: 6 coasters, 1 holder, 4 leaves, 4 berries
- Layout: Separate coasters stacked in a freestanding holder; the appliqués are sewn to the holder
- Coaster size before border: 4.75 in (12.1 cm) point to point
- Border depth: 0.25 in (0.6 cm)
Materials
Use a smooth cotton or cotton-blend DK yarn. It absorbs drips and holds crisp points. Avoid fuzzy yarns, because they hide the texture.
- Color A, cream: 25 g, about 60 m (coaster centers, berries)
- Color B, oatmeal beige: 75 g, about 180 m (coaster outer zones, holder)
- Color C, golden mustard: 25 g, about 60 m (coaster borders, leaves)
These quantities include a margin of about 20% for gauge swatches and tension differences.
Tools: 3.5 mm (E-4) hook, tapestry needle, stitch markers, scissors, blocking mat, rust-proof pins, spray bottle, and a small amount of fiberfill or yarn scraps for the berries.
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- sc2tog: single crochet 2 together
- rev sc: reverse single crochet (crab stitch)
- BLO: back loop only
- MR: magic ring
- sp: space
- st(s): stitch(es)
Puff stitch: (Yo, insert hook in the stitch, yo and pull up a loop to dc height) 3 times, so you have 7 loops on the hook. Yo and pull through all 7 loops. Ch 1 to close; this closing ch does not count as a stitch.
Picot: Ch 2, sl st in the first ch.
Reverse sc: Sc worked backward, from left to right, so each stitch twists into a rope.
Gauge and Checkpoints
Base gauge: 22 sc and 24 rows = 4 in (10.2 cm) in sc worked flat.
Make one full coaster before you make the rest, then measure it at each checkpoint:
- After Round 3: circle is 2.5 in (6.4 cm) across
- After Round 4: 3.25 in (8.3 cm) across
- After Round 5: 3.5 in (8.9 cm) across
- After Round 6: 4.75 in (12.1 cm) point to point
- After the border: 5.25 in (13.3 cm) point to point
Too big? Go down to a 3.25 mm hook, because an oversized coaster won’t fit the holder. Too small? Go up to a 3.75 mm hook. If Round 4 ruffles, shorten your puff loops. If the piece cups, loosen your tension.
For the holder, check the base after Round 16. Each side should measure 2.9 in (7.4 cm).

Coaster Pattern (Make 6)
Center (Color A)
Round 1: Make an MR. Ch 2 (does not count as a st), work 12 dc in the ring, then sl st to the first dc to join. (12 sts)
Round 2: Ch 2, 2 dc in each st around, join. (24 sts)
Round 3: Ch 2, dc in next st, 2 dc in next st 12 times, join. (36 sts)
Fasten off Color A. Checkpoint: 2.5 in (6.4 cm).
Puff Zone (Color B)
Round 4: Join Color B with a sl st in any st. Ch 2 (does not count). Then repeat (puff, ch 1) in next st, (puff, ch 1) in next st, skip next st 12 times. Join with a sl st to the top of the first puff. (24 puffs + 24 ch-1 sps = 48 sts)
Every 3 stitches become 4. That adds the 12 stitches a flat dc-height round needs. The puffs radiate in pairs from the center.
Round 5: Ch 1, sc in each puff and in each ch-1 sp around, join. (48 sc)
Checkpoint: 3.5 in (8.9 cm).
Star Points (Color B)
Round 6: Ch 1 (does not count). Repeat sl st in next st, sc in next st, hdc in next st, dc in next st, (tr, ch 2, tr) in next st, dc in next st, hdc in next st, sc in next st 6 times. Begin the first repeat in the same st as the join, then sl st to the first sl st to finish. (54 sts + 6 ch-2 sps)
Each 8-stitch section of Round 5 becomes one point. A point has 9 stitches: sl st, sc, hdc, dc, tr, tr, dc, hdc, sc. The sl st is the valley, and the ch-2 sp makes the small eyelet at the tip. 6 points × 9 sts = 54. ✓
Fasten off Color B. Checkpoint: 4.75 in (12.1 cm) point to point.
Holder Base (Color B)
Work in joined rounds. Ch 1 at the start of each round does not count.
Round 1: MR, 6 sc in the ring, join. (6 sts)
Round 2: 2 sc in each st around, join. (12 sts)
Round 3: Sc in next st, 2 sc in next st 6 times, join. (18 sts)
Rounds 4–16: For each round number n, repeat sc in next (n − 2) sts, 2 sc in next st 6 times, then join. Each round ends with 6 × n sts. Always place the increase in the second sc of the previous round’s increase. This stacks the increases into six clean corners.
- Round 4: (sc 2, inc) × 6 = 24 sts
- Round 8: (sc 6, inc) × 6 = 48 sts
- Round 12: (sc 10, inc) × 6 = 72 sts
- Round 16: (sc 14, inc) × 6 = 96 sts
After Round 16 each side has 16 sts, and that count includes its corner pair. Checkpoint: 2.9 in (7.4 cm) per side, 5.8 in (14.7 cm) corner to corner, 5 in (12.7 cm) flat to flat.
Holder Walls (Color B)
Round 17: Ch 1, sc BLO in each st around, join. (96 sts) The unworked front loops form a crisp fold line.
Rounds 18–21: Ch 1, sc in each st around, join. (96 sts) Fasten off.
The wall is now 0.8 in (2.0 cm) tall. This is also the finished height at the bottom of the notch.
Front Notch (Worked in Rows)
Pick one side to be the front and number its 16 stitches from 1 to 16, working in your usual stitching direction. Stitches 4–13 (the center 10) stay unworked.
Row 22 (RS): Join Color B with a standing sc in st 14 of the front side. Sc in sts 15–16, sc in all 80 sts of the next 5 sides, then sc in sts 1–3 of the front side. Turn. (3 + 80 + 3 = 86 sts)
Rows 23–28: Ch 1, sc in each st across, turn. (86 sts)
The notch is 10 sts wide, which is 1.8 in (4.6 cm), and 7 rows deep, which is 1.2 in (3.0 cm). The full wall is 12 rows, or 2 in (5.1 cm), tall.
Round 29 (edging): At the end of Row 28, do not turn. Ch 1, then work 7 sc down the notch edge (1 per row end), 1 sc in each of the 10 unworked notch sts, 7 sc up the other notch edge, and 1 sc in each of the 86 top sts. Join. (7 + 10 + 7 + 86 = 110 sts) Fasten off.
Appliqués
Holly Leaf (Make 4, Color C)
Ch 8.
Side 1: Sl st in the 2nd ch from the hook, sc in next ch, hdc in next ch, dc in next ch, picot, dc in next ch, hdc in next ch, then work (sc, ch 2, sc) in the last ch for the tip.
Side 2: Work along the opposite side of the foundation chain: hdc in next ch, dc in next ch, picot, dc in next ch, hdc in next ch, sc in next ch, sl st in last ch. (14 sts + 2 picots + tip ch-2)
The leaf is 1.25 in (3.2 cm) long and 0.6 in (1.5 cm) wide. The foundation chain makes the center vein. Leave a 6 in (15.2 cm) tail.
Berry (Make 4, Color A)
Round 1: MR, 6 sc, join. (6 sts)
Round 2: 2 sc in each st, join. (12 sts)
Round 3: Sc2tog 6 times, join. (6 sts)
Stuff the berry lightly, close the hole and keep the tail for sewing. Each berry is 0.5 in (1.3 cm) across.
Make All Pieces
| Piece | Qty | A | B | C |
|---|---|---|---|---|
| Coaster | 6 | Rounds 1–3 | Rounds 4–6 | Border |
| Holder | 1 | — | All | — |
| Leaf | 4 | — | — | All |
| Berry | 4 | All | — | — |
Holder layout (top view, front at bottom):
[ Side 4: back ]
[ Side 5 ] [ Side 3 ]
[ Side 6: holly ] [ Side 2: holly ]
[ Side 1: front notch ]
Assembly (Appliqués to Holder)
The coasters are never joined; they simply stack in the holder. The only sewing in this pattern attaches the trims.
- Center one holly spray on Side 2 and one on Side 6, with each spray 0.75 in (1.9 cm) below the top edge.
- Pin two leaves so they fan up and out in a V, with their stem ends touching.
- Whipstitch each leaf through the back loops of its outer stitches only, so the picots stay free.
- Stack the two berries over the stem ends, one slightly lower than the other, and sew them through their centers.
- Keep your stitches snug but not tight, or the wall will pucker.
Size checkpoint: The holder should still measure 5.8 in (14.7 cm) corner to corner. Test-fit one bordered coaster with its points in the corners; you should have about 0.25 in (0.6 cm) of clearance.
Coaster Border (Color C)
Border gauge: 5 sc per point edge, measured from the tip to the valley, which is about 1.3 in (3.3 cm).
Border Round 1: Join Color C with a standing sc in any tip ch-2 sp, then work (ch 2, sc) in the same sp. Repeat sc in next 4 sts (tr, dc, hdc, sc), skip the valley sl st, sc in next 4 sts (sc, hdc, dc, tr), (sc, ch 2, sc) in next ch-2 sp 5 times. Finish with sc in next 4 sts, skip the sl st, sc in next 4 sts, and join to the first sc. (60 sc + 6 ch-2 sps)
Each point edge has 5 sc: 1 tip sc and 4 side sc. With 12 edges, 12 × 5 = 60. ✓
Border Round 2: Ch 1, then work rev sc in each sc and 2 rev sc in each ch-2 sp, and join. (60 worked 1-per-st + 12 extra at the tips = 72 sts) Each edge now has 6 sts. Fasten off.
Why the math works: Skipping the valley sl st makes a sharp inward V that can’t ruffle. The 2 extra stitches at each tip let the rope turn the point without blunting it. Round 2 adds height, not width, so the border depth stays at 0.25 in (0.6 cm).
Final Blocking
- Weave in ends through stitches of the same color.
- Mist each coaster until it is damp but not soaked.
- Pin it to 5.25 in (13.3 cm) point to point, placing one pin in each tip eyelet.
- Press the valleys inward with your fingertips so the V shapes look crisp.
- Lightly stuff the holder with a towel so the walls dry upright, and pinch each of the six corners into shape.
- Leave everything to dry completely before you unpin it.
Final Quality-Control Checklist
- All six coasters measure 5.25 in (13.3 cm) point to point, give or take 0.125 in (0.3 cm)
- The coasters lie flat with no cupping or ruffling
- Each tip has a visible eyelet and each valley a sharp V
- The rope edge is even all the way around
- The holder base is flat and has six distinct corners
- The notch is centered on the front side
- The holly sprays sit at matching heights
- The stack of six coasters sits below the top of the holder walls
Troubleshooting
The coaster cups: Loosen your tension on Round 5 or use a larger hook for that round.
The points look blunt: Make sure you skipped the valley sl st in Border Round 1 and worked (tr, ch 2, tr) in a single stitch.
The holder corners are rounding: You have drifted off your increase points. Mark one corner and recount every few rounds.
The walls flare outward: Work Rounds 18–21 with a 3.25 mm hook.
The coasters don’t fit: Measure them. If they are larger than 5.25 in (13.3 cm), block them smaller or remake them with a smaller hook.
Care
Hand wash in cool water with mild soap, press out the water in a towel and dry flat. Reshape the points and holder corners while the pieces are damp.

Final Notes
The set relies on one chain of measurements. The coaster center is 2.5 in (6.4 cm), the puff zone 3.5 in (8.9 cm), the points 4.75 in (12.1 cm) and the bordered star 5.25 in (13.3 cm). That star fits a holder base of 5.8 in (14.7 cm) corner to corner with 2 in (5.1 cm) walls. If you hit each checkpoint, the stack will drop neatly into place.
Happy crocheting!