This set is three small hanging baskets. Each one has its own tapered strap with a ring at the top. Every basket is a round bowl with a solid lavender base, a band of open lavender fans, a wavy cream band, and an open lavender rim of scallops. Hang them from a wooden dowel with leather loops to hold brushes, combs, and small bottles.
The colors are soft lavender and warm cream. The style is pretty but practical. The base and lower walls are firm single crochet so each basket keeps its shape, and the lacy rounds are higher up where they show.
The pattern uses US crochet terms. Each finished basket is about 5½ in (14.0 cm) across the top and 4 in (10.2 cm) tall. Each strap is 7½ in (19.1 cm) long, including the ring.
Construction is simple. You crochet a flat circle for the base and turn it up into walls by working through the back loops. Then you work alternating fan rounds in lavender and cream. The strap is worked in rows, narrows with decreases, and ends in a crocheted ring. It is sewn to the inside back wall.
Finished Size and Construction
- Finished basket size: 5½ in (14.0 cm) top diameter x 4 in (10.2 cm) tall
- Base diameter: 4¼ in (10.8 cm)
- Strap: 7½ in (19.1 cm) long; 1¾ in (4.4 cm) wide at the bottom, ¾ in (1.9 cm) wide at the top
- Skill level: Easy-intermediate
- Terminology: US terms
- Yarn weight: Worsted (#4) cotton
- Hook: 4.0 mm (US G-6)
- Number of pieces: 6 crocheted pieces (3 baskets, 3 straps)
- Layout: 3 baskets side by side on one dowel
- Basket size before rim: 2¾ in (7.0 cm) tall, about 5 in (12.7 cm) across
- Rim depth: 1¼ in (3.2 cm)
Materials
Use a smooth worsted-weight cotton or cotton blend. Cotton makes firm, crisp fans and holds its shape when the basket is full. Avoid very soft, stretchy acrylic, which will make the baskets sag.
- Lavender: 130 g (about 205 m) for the bases, lower fans, rims, and straps
- Cream: 40 g (about 65 m) for the middle bands
These amounts include about 15 percent extra for your gauge swatch and weaving in ends.
Tools and hardware:
- 4.0 mm (US G-6) crochet hook
- Tapestry needle
- 4 stitch markers
- Scissors
- Tape measure
- 3 leather strap loops with a snap or rivet, about ¾ in (1.9 cm) wide
- 1 wooden dowel, 18 in (45.7 cm) long and ⅝ in (1.6 cm) thick
- 2 small wall hooks or brackets
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- sc2tog: single crochet 2 together (decrease)
- inc: 2 sc in the same stitch
- BLO: back loop only
- MR: magic ring
- st(s): stitch(es)
- sp(s): space(s)
- rep: repeat
Special stitches:
- V-st: (dc, ch 2, dc) in the same stitch.
- Closed fan: 7 dc in the same space.
- Small open fan: (dc, ch 1) 4 times, then dc, all in the same stitch. This makes 5 dc and 4 ch-1 sps. The 3rd dc is the center.
- Large open fan: (dc, ch 1) 6 times, then dc, all in the same space. This makes 7 dc and 6 ch-1 sps.
Gauge and Checkpoints
Gauge: 16 sc and 16 rounds = 4 in (10.2 cm), worked firmly. Each sc round is ¼ in (0.6 cm) tall.
Make one complete basket first and check it before you start the others. Checkpoints:
- After Round 9: The base is 4¼ in (10.8 cm) across and lies flat.
- After Round 14: The solid wall is 1¼ in (3.2 cm) tall.
- After Round 18: The basket is 2¾ in (7.0 cm) tall and about 5 in (12.7 cm) across.
- After Round 21: The basket is 4 in (10.2 cm) tall and 5½ in (14.0 cm) across the scallop tips.
- Strap after Row 24: 6 in (15.2 cm) long.
If your base is larger than 4½ in (11.4 cm), switch to a 3.75 mm hook. If it is smaller than 4 in (10.2 cm), switch to a 4.5 mm hook.

Basket (make 3)
Base
Work in joined rounds. Join each round with a sl st to the first sc. The ch 1 at the start of a round does not count as a stitch.
With Lavender:
Round 1: Make an MR, ch 1, 6 sc in the ring, join. (6 sts)
Round 2: Ch 1, inc in each st around, join. (12 sts)
Round 3: Ch 1, *sc in next st, inc in next st; rep from * 5 more times, join. (18 sts)
Round 4: Ch 1, *sc in next 2 sts, inc in next st; rep from * 5 more times, join. (24 sts)
Round 5: Ch 1, *sc in next 3 sts, inc in next st; rep from * 5 more times, join. (30 sts)
Round 6: Ch 1, *sc in next 4 sts, inc in next st; rep from * 5 more times, join. (36 sts)
Round 7: Ch 1, *sc in next 5 sts, inc in next st; rep from * 5 more times, join. (42 sts)
Round 8: Ch 1, *sc in next 6 sts, inc in next st; rep from * 5 more times, join. (48 sts)
Round 9: Ch 1, *sc in next 7 sts, inc in next st; rep from * 5 more times, join. (54 sts)
Checkpoint: 4¼ in (10.8 cm) across.
Walls
Round 10: Ch 1, sc in the BLO of each st around, join. (54 sts) This makes a clean ridge where the base turns up into the wall.
Rounds 11–14: Ch 1, sc in each st around, join. (54 sts)
Checkpoint: The wall is 1¼ in (3.2 cm) tall.
Lavender Fan Band
Round 15: Ch 1, sc in first st, *skip 2 sts, small open fan in next st, skip 2 sts, sc in next st; rep from * 7 more times, skip 2 sts, small open fan in next st, skip 2 sts, join to first sc. (9 small open fans and 9 sc)
Each repeat uses 6 stitches, and 9 x 6 = 54, so the fans fit the wall exactly. Fasten off Lavender.
Cream Band
Round 16 (setup): Join Cream in the center (3rd) dc of any fan. Ch 1, sc in same st, *ch 3, V-st in next sc, ch 3, sc in center dc of next fan; rep from * 7 more times, ch 3, V-st in next sc, ch 3, join to first sc. (9 sc, 9 V-sts, 18 ch-3 sps)
Round 17: Ch 1, sc in same sc, *skip ch-3 sp, closed fan in ch-2 sp of next V-st, skip ch-3 sp, sc in next sc; rep from * around, leaving out the last sc, join. (9 closed fans and 9 sc = 72 sts)
The cream fans sit between the lavender fans, which creates the wavy, offset look.
Round 18: Ch 1, sc in each st around, join. (72 sts) Fasten off Cream.
Checkpoint: 2¾ in (7.0 cm) tall and about 5 in (12.7 cm) across.
Rim (Scalloped Border)
The rim is the basket’s border. It uses the same gauge as the body. Each of the 9 repeats counts as one “side” of the rim.
In Round 18, each 8-stitch repeat sits over one cream sc and the 7 dc of one cream fan. The 4th of those 7 stitches is the center of the fan.
Round 19: Join Lavender in the center sc of any cream fan (the sc above the 4th dc). Ch 1, sc in same st, *ch 3, skip 3 sts, V-st in next st (the st above the Round 17 sc), ch 3, skip 3 sts, sc in next st (next fan center); rep from * around, leaving out the last sc, join. (9 sc, 9 V-sts, 18 ch-3 sps)
Each repeat uses 1 sc + 3 skipped + 1 V-st + 3 skipped = 8 stitches, and 9 x 8 = 72.
Round 20: Ch 1, sc in same sc, *skip ch-3 sp, large open fan in ch-2 sp of next V-st, skip ch-3 sp, sc in next sc; rep from * around, leaving out the last sc, join. (9 large open fans and 9 sc)
Round 21: Ch 1, *sc in sc, [sc in next dc, sc in next ch-1 sp] 6 times, sc in next dc; rep from * around, join. (14 sc per repeat; 126 sts) Fasten off.
Why the math works: each repeat has 1 sc above the sc, 7 sc above the dc, and 6 sc in the ch-1 spaces, so 1 + 7 + 6 = 14. With 9 repeats, 9 x 14 = 126. The rim fans line up above the lavender fans from Round 15, so the colors alternate evenly.
Checkpoint: 4 in (10.2 cm) tall and 5½ in (14.0 cm) across the scallop tips.
Strap (make 3)
Use Lavender and work in rows. The ch 1 at the start of a row does not count as a stitch.
Row 1: Ch 8, sc in 2nd ch from hook and in each ch across, turn. (7 sts)
Rows 2–10: Ch 1, sc in each st across, turn. (7 sts)
Checkpoint: 2½ in (6.4 cm) long and 1¾ in (4.4 cm) wide.
Row 11: Ch 1, sc2tog, sc in next 3 sts, sc2tog, turn. (5 sts)
Rows 12–16: Ch 1, sc in each st across, turn. (5 sts) The strap is 1¼ in (3.2 cm) wide here.
Row 17: Ch 1, sc2tog, sc in next st, sc2tog, turn. (3 sts)
Rows 18–24: Ch 1, sc in each st across, turn. (3 sts)
Checkpoint: 6 in (15.2 cm) long and ¾ in (1.9 cm) wide at the top.
Ring
Ring setup: Ch 14, sl st in the first sc of Row 24 to form a loop. Don’t twist the chain.
Ring round: Ch 1, work 24 sc around the chain loop (into the center, not into the chains), then sl st in the last sc of Row 24. (24 sts) Fasten off, leaving a 6 in (15.2 cm) tail to secure the base of the ring.
The ring is 1½ in (3.8 cm) across with an opening of about 1 in (2.5 cm). The total strap length is 7½ in (19.1 cm).
Make All Pieces
- Baskets: Make 3. Each uses Lavender for Rounds 1–15 and 19–21 and Cream for Rounds 16–18.
- Straps: Make 3, all in Lavender.
Layout on the dowel:
|=============== DOWEL 18 in (45.7 cm) ===============|
[loop] [loop] [loop]
Strap 1 Strap 2 Strap 3
Basket 1 Basket 2 Basket 3
Space the loops about 6 in (15.2 cm) apart, center to center. This leaves a little room between the 5½ in (14.0 cm) baskets.
Joining
Method: Whipstitch with Lavender and a tapestry needle. Each strap attaches to the inside back wall of one basket.
Stitch-to-stitch logic: The strap and the wall have the same gauge, so they match one to one.
- Choose 7 stitches in a row on Round 10 at the back of the basket. Place a marker at each end.
- On the inside, sew the 7 stitches of strap Row 1 to those 7 stitches of Round 10, one stitch to one stitch.
- Sew each side edge of strap Rows 1–5 to the wall, one row end to one round (Rounds 10–14). That is 5 stitches per side.
- Tack the center of strap Row 11 to the inside of Round 18 with 2–3 small stitches, directly above the sewn section.
Tension advice: Pull each stitch snug but not tight. Pulling too hard puckers the wall and makes the strap twist when it hangs.
Size checkpoint: With the basket hanging, measure from the top of the ring to the bottom of the basket. It should be about 7½ in (19.1 cm). All three baskets should match within ¼ in (0.6 cm).
Pass a leather loop through each ring, wrap it over the dowel, and close the snap.
Final Blocking
- Weave in all ends inside the basket, running them through stitches of the same color.
- Mist each basket lightly until it is damp but not soaked.
- Fill the basket with a rolled towel, or set it over a 5 in (12.7 cm) jar, so the walls stand straight.
- Shape each rim fan into a rounded scallop and open up the ch-1 spaces with your fingers.
- Lay the straps flat, straighten them, and pin them to 7½ in (19.1 cm).
- Let everything dry completely, for at least 12 hours.
Final Quality-Control Checklist
- The base lies flat at 4¼ in (10.8 cm) across.
- The Round 10 ridge is even all the way around.
- Each basket has 9 lavender fans, 9 cream fans, and 9 rim fans.
- The rim fans sit directly above the lavender fans.
- Each basket is 4 in (10.2 cm) tall and 5½ in (14.0 cm) across.
- Each strap is 7½ in (19.1 cm) long with a round ring.
- Each strap is sewn straight and centered at the back.
- All three baskets hang at the same height.
Troubleshooting
The base ruffles: You have too many stitches for your tension. Go down a hook size or crochet more tightly.
The base cups: Your tension is too tight. Go up a hook size.
The fans don’t fit evenly: Count Round 14 again. It must have 54 stitches for 9 repeats of 6.
The cream fans are lopsided: Make sure each V-st in Round 16 is worked into a sc between two lavender fans.
The rim flares too much: Work Round 21 with a hook 0.5 mm smaller.
The strap twists: Sew the bottom again with the strap centered, and check that the ring chain isn’t twisted.
The basket tips forward: Add a second tack stitch at Round 18 and keep heavier items toward the back.
Care
Hand wash in cool water with mild soap. Press out the water in a towel and reshape the baskets to dry. Remove the leather loops before washing.

Final Notes
Here is the full measurement chain. Each basket starts with a 4¼ in (10.8 cm) base of 54 stitches and a 1¼ in (3.2 cm) solid wall. Nine fan repeats of 6 stitches bring the body to 2¾ in (7.0 cm), and the 1¼ in (3.2 cm) rim finishes the basket at 4 in (10.2 cm). The 7-stitch strap narrows to 3 stitches over 6 in (15.2 cm) and ends in a 1½ in (3.8 cm) ring, for a total of 7½ in (19.1 cm). Check the first basket against every checkpoint, and the other two will match.
Happy crocheting!