Gilded Bauble Plastic Bag Holder Crochet Pattern

This holiday bag holder is shaped like a round Christmas ornament. It has a deep burgundy body, gold accent stripes, an open gold lattice around the middle, and a ring of burgundy fans. A narrow neck with gold “ladder” bars sits under a solid rim. A striped strap at the back hangs over a cabinet knob.

You push bags in through the neck and pull them out one at a time through a small gold-edged hole at the bottom. When it’s full, the body puffs out into a proper bauble.

The pattern uses US crochet terms. Laid flat, the holder measures 10 in (25.4 cm) tall and 10.3 in (26.2 cm) wide, not counting the strap. Filled, it is about 8 in (20.3 cm) tall and 6.5 in (16.5 cm) across. With the strap and loop, the total length is about 18.5 in (47.0 cm).

The holder is made in one seamless piece. You start with a chain ring at the bottom, increase to the widest point, and work the lattice and fan band. Then you decrease to the neck, edge both openings, and work the strap in rows straight off the rim.

Finished Size and Construction

  • Finished size (flat, no strap): 10 in (25.4 cm) tall × 10.3 in (26.2 cm) wide
  • Filled size: about 8 in (20.3 cm) × 6.5 in (16.5 cm)
  • Total length with strap: about 18.5 in (47.0 cm)
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4)
  • Hook: 5.0 mm (US H-8)
  • Number of pieces: 1, worked in joined rounds; the strap is worked onto the rim
  • Layout: Single piece, no assembly
  • Bottom opening: 2.2 in (5.6 cm) across
  • Neck opening: 3.3 in (8.4 cm) across
  • Size before border: about 9 in (22.9 cm) tall, flat
  • Border depth: 0.75 in (1.9 cm) at the top rim, 0.25 in (0.6 cm) at the bottom edging

Materials

Use a smooth worsted-weight acrylic or acrylic blend. It holds its shape, washes easily, and won’t snag on bags. A gold yarn with a light metallic strand looks festive, as long as it’s soft enough to chain smoothly.

  • Color A, burgundy: 75 g / 140 m
  • Color B, gold: 35 g / 65 m

Quantities include a margin of about 15% for gauge checks and ends.

Tools:

  • 5.0 mm (US H-8) hook
  • Tapestry needle
  • 4 stitch markers
  • Scissors
  • Measuring tape
  • Spray bottle or steamer
  • Plastic bags or a balloon for blocking

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • dc: double crochet
  • inc: 2 sc in same stitch
  • sc2tog: single crochet 2 together
  • sk: skip
  • sp: space
  • st(s): stitch(es)
  • rnd(s): round(s)
  • rep: repeat

Special stitch: Fan. Work 5 dc in the same stitch.

Round notes:

  • Work in joined rounds with the right side facing. Do not turn.
  • In sc rounds, ch 1 at the start (it doesn’t count as a stitch) and join with a sl st to the first st.
  • In dc rounds, ch 3 counts as the first dc.
  • “Rep X times” means X times in total.
  • At color changes, fasten off and join the new color at the back so the seams line up.

Gauge and Checkpoints

Gauge: 14 sc and 16 rnds = 4 in (10.2 cm), which is 3.5 sts and 4 rnds per inch.

Since this is a single piece, the piece is your gauge test. Work through Rnd 9 and measure before going any further.

Checkpoints:

  • After Rnd 1: The ring is 6.9 in (17.5 cm) around and 2.2 in (5.6 cm) across.
  • After Rnd 9: It’s 20.6 in (52.3 cm) around, or 10.3 in (26.2 cm) wide flattened, and shaped like a shallow bowl.
  • After Rnd 20: It’s about 6.75 in (17.1 cm) tall, measured flat.
  • After Rnd 28: It’s about 9 in (22.9 cm) tall, and the neck is 5.1 in (13.0 cm) wide flattened.

Fixing your gauge:

  • If your piece is too big, change to a 4.5 mm hook.
  • If it’s too small, change to a 5.5 mm hook.
  • If you’re off by 1 in (2.5 cm) or more at Rnd 9, start again.
Burgundy and cream crocheted decorative hanging with brass finial ball, displaying ribbed and openwork stitch details against warm neutral background.

Base and Lower Body

With A, ch 24 and join with a sl st to form a ring, taking care not to twist.

Rnd 1 (A): Ch 1, sc in each ch, join. (24 sc)

Rnd 2: Ch 1, sc in next 3, inc; rep 6 times, join. (30 sc)

Rnd 3: Ch 1, sc in next 4, inc; rep 6 times, join. (36 sc)

Rnd 4: Ch 1, sc in next 5, inc; rep 6 times, join. (42 sc)

Rnd 5: Ch 1, sc in next 6, inc; rep 6 times, join. (48 sc)

Rnd 6: Ch 1, sc in next 7, inc; rep 6 times, join. (54 sc)

Rnd 7: Ch 1, sc in next 8, inc; rep 6 times, join. (60 sc)

Rnd 8: Ch 1, sc in next 9, inc; rep 6 times, join. (66 sc)

Rnd 9: Ch 1, sc in next 10, inc; rep 6 times, join. (72 sc)

Adding only 6 sts per round is fewer than a flat circle needs, so the base curves up into a rounded bottom. Check your gauge now.

Rnd 10 (A): Ch 1, sc in each st, join. Fasten off. (72 sc)

Rnd 11 (B): Join B, ch 1, sc in each st, join. Fasten off. (72 sc)

Rnd 12 (A): Join A, ch 3, dc in each st, join to top of ch-3. Fasten off. (72 dc)

Rnd 13 (B): Join B, ch 1, sc in each st, join. Don’t fasten off. (72 sc)

Lattice and Fan Band

Rnd 14 (B, lattice): Ch 1, sc in first st. Ch 5, sk 3, sc in next st; rep 17 times. Ch 5, sk 3, join to first sc. (18 ch-5 loops)

This uses 1 + (17 × 4) + 3 = 72 sts.

Rnd 15 (B, lattice): Sl st in next 3 ch to reach the center of the loop. Ch 1, sc in the same loop. Ch 5, sc in next loop; rep 17 times. Ch 5, join. Fasten off. (18 loops)

These loops sit offset from the ones below, which forms the gold diamonds.

Rnd 16 (A): Join A in any loop. Ch 3, then 3 dc in the same loop. Work 4 dc in each of the remaining 17 loops, then join. (18 × 4 = 72 dc)

Rnd 17 (A, fans): Ch 1, sc in first st. Sk 1, Fan in next st, sk 1, sc in next st; rep 17 times. Sk 1, Fan in next st, sk 1, join to first sc. Fasten off. (18 Fans + 18 sc = 108 sts)

This uses 1 + (17 × 4) + 3 = 72 sts.

Rnd 18 (B, lattice): Join B in the center (3rd) dc of any Fan. Ch 1, sc in the same st. Ch 5, sc in center dc of next Fan; rep 17 times. Ch 5, join. (18 loops)

Rnd 19 (B, lattice): Work as Rnd 15. Fasten off. (18 loops)

Rnd 20 (A): Work as Rnd 16. Fasten off. (72 dc)

Shoulder and Neck

Rnd 21 (B): Join B, ch 1, sc in next 7, sc2tog; rep 8 times, join. Fasten off. (64 sc)

Rnd 22 (A): Join A, ch 1, sc in next 6, sc2tog; rep 8 times, join. (56 sc)

Rnd 23 (A): Ch 1, sc in next 5, sc2tog; rep 8 times, join. (48 sc)

Rnd 24 (A): Ch 1, sc in next 6, sc2tog; rep 6 times, join. (42 sc)

Rnd 25 (A): Ch 1, sc in next 5, sc2tog; rep 6 times, join. Fasten off. (36 sc)

Rnd 26 (B): Join B, ch 1, sc in each st, join. (36 sc)

Rnd 27 (B, ladder): Ch 4 (counts as dc + ch 1), sk next st. Dc in next st, ch 1, sk next st; rep 17 times. Join to 3rd ch of the ch-4. (18 dc + 18 ch-1 sps = 36 sts)

Rnd 28 (B): Ch 1, sc in each dc and each ch-1 sp, join. Fasten off. (36 sc)

Check that the piece is 9 in (22.9 cm) tall and the neck is 5.1 in (13.0 cm) wide flattened.

Border

The border has two parts: a burgundy neck rim and a gold edging around the bottom hole. Both use 1 sc per existing stitch, so neither opening flares or tightens.

Border gauge: 3.5 sc per inch.

  • Neck: 36 ÷ 3.5 = 10.3 in (26.2 cm) around.
  • Bottom: 24 ÷ 3.5 = 6.9 in (17.5 cm) around.

Top Rim

Border Rnd 1 (A): Join A at the back, above the color-change seams. Ch 1, sc in each st, join. (36 sc)

Border Rnds 2–3 (A): Ch 1, sc in each st, join. (36 sc)

Don’t fasten off.

Hanging Strap

Row 1 (A): Ch 1, sc in next 6 sts of the rim. Turn. (6 sc)

Rows 2–40: Ch 1, sc in each st, turn. (6 sc)

Fasten off and leave a 12 in (30.5 cm) tail.

  • Rows 1–28 form the upright strap: 7 in (17.8 cm) long and 1.7 in (4.3 cm) wide.
  • Rows 29–40 measure 3 in (7.6 cm). Fold them to the back, lining up Row 40 with Row 28, and whipstitch them together. This makes a loop 1.5 in (3.8 cm) tall.

Gold stripes: With B and the right side facing, surface slip stitch up the strap from Row 1 to Row 28. Make one line between sts 1 and 2 and another between sts 5 and 6. Keep these loose.

Bottom Edging

Bottom Rnd (B): Turn the holder upside down. Join B in any free loop of the starting chain. Ch 1, sc in each of the 24 loops, join. Fasten off. (24 sc)

Why the math works:

  • With 1 sc per stitch, the counts stay at 36 and 24.
  • The 6-st strap covers one-sixth of the rim, so it sits neatly at the back.
  • Flat height is 9 + 0.75 + 0.25 = 10 in (25.4 cm).

Final Blocking

  1. Weave in all ends on the wrong side.
  2. Fill the body firmly with bags, or use a balloon inflated to 6.5 in (16.5 cm).
  3. Ease the lattice so the diamonds open evenly and the Fans stand up.
  4. Mist with water, or steam from 2 in (5.1 cm) away. Never touch acrylic with an iron.
  5. Pin the strap straight, with the loop open.
  6. Let it dry for 12–24 hours.
  7. Remove the filling and confirm the holder is 10 in (25.4 cm) tall and 10.3 in (26.2 cm) wide.

Final Quality-Control Checklist

  • Widest flat width is 10.3 in (26.2 cm).
  • Flat height is 10 in (25.4 cm).
  • Each lattice band has 18 even diamonds.
  • The 18 Fans line up with the lattice.
  • The neck ladder has 18 even gold bars.
  • The bottom hole is 2.2 in (5.6 cm) with a complete gold edge.
  • The strap is 7 in (17.8 cm), straight, and centered at the back.
  • The loop is securely stitched.
  • No ends show on the right side.

Troubleshooting

The base ruffles. Make sure you’re adding exactly 6 inc per round. If you are, go down a hook size.

The lattice sags. Use ch 4 instead of ch 5 in the lattice rounds. The dc counts don’t change.

The Fans don’t line up. Count the 72 sts in Rnd 16 before you start Rnd 17.

The strap leans. Count 6 sts on every row and ch 1 at each turn.

Bags pull out too fast. Add a second gold round to the bottom edging, working sc2tog 4 times evenly spaced. (20 sc)

Care

Hand wash in cool water and press the water out in a towel. Reshape around plastic bags to dry, and don’t tumble dry if you used metallic yarn.

Burgundy and cream crocheted ornament with diamond pattern hangs on wooden door amid holiday greenery and twinkling lights.

Final Notes

Everything in this pattern follows from a gauge of 3.5 sts per inch:

  • 24 sts make a 2.2 in (5.6 cm) bottom hole.
  • 72 sts make a body 10.3 in (26.2 cm) wide.
  • The lattice band turns 18 loops back into 72 dc.
  • 36 sts make a 3.3 in (8.4 cm) neck.
  • The border keeps every count and brings the height to 10 in (25.4 cm).
  • The strap adds 7 in (17.8 cm) plus the loop.

For a matching pair, make a second holder in forest green with the same gold.

Happy crocheting!

Leave a Comment