Shelly the Sea Turtle Pocket Organizer Crochet Pattern

Shelly is a cheerful sea turtle that hangs on the wall and holds the small things that tend to pile up on bathroom counters. A solid olive shell carries seven hexagon “plates,” a smiling sage head peeks over the top, and an open cream mesh pocket stretches across the lower half of the shell.

The palette is soft and natural: dark olive for the shell and loop, light sage for the head, flippers and hexagon centers, and cream for the pocket. The style is flat and graphic, like a storybook illustration, so it works in a nursery, a bathroom or an entryway.

This pattern uses US crochet terms. The turtle measures about 10 in (25.4 cm) wide and 11.5 in (29.2 cm) tall. With the hanging loop it is 15 in (38.1 cm) tall.

You will crochet an oval shell in joined rounds and add a two-round border. Next, you will make seven hexagons, a flat circular head, four shaped flippers, a slip-stitch cord and a mesh pocket worked from the top down. Everything is then sewn together.

Finished Size and Construction

  • Finished size: 10 in (25.4 cm) wide x 11.5 in (29.2 cm) tall; 15 in (38.1 cm) including loop
  • Skill level: Easy-Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.0 mm (US G-6)
  • Number of pieces: 15 (1 shell, 7 hexagons, 1 head, 4 flippers, 1 loop, 1 pocket)
  • Layout: Hexagons in a 1-center, 6-around flower; head on top, flippers at the four “corners,” pocket over the lower shell
  • Piece size: Hexagon 1.75 in (4.4 cm); head 3 in (7.6 cm); front flipper 3.25 x 1.25 in (8.3 x 3.2 cm); back flipper 2 x 1.25 in (5.1 x 3.2 cm); pocket 6.25 x 4.75 in (15.9 x 12.1 cm)
  • Shell size before border: 6.25 x 7.5 in (15.9 x 19.1 cm)
  • Border depth: 0.25 in (0.6 cm) per edge

Materials

Choose a smooth worsted-weight cotton or cotton blend. Cotton holds its shape on the wall and handles damp bathroom air well. Avoid fuzzy yarns, because they hide the hexagon outlines and the mesh.

  • Olive (dark green): 70 g / 108 m
  • Sage (light green): 40 g / 62 m
  • Cream: 30 g / 46 m

These amounts include a margin of roughly 20 percent.

Tools:
– 4.0 mm (US G-6) hook
– Two 8 mm black safety eyes
– Black embroidery floss or scrap yarn for the smile
– Tapestry needle
– Locking stitch markers
– Sewing pins
– Scissors
– Blocking mat and rust-proof pins

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sk – skip
  • BLO – back loop only
  • st(s) – stitch(es)
  • RS – right side

Special stitch: slip-stitch cord. Make a chain, then sl st into the back bump of each chain. This gives a firm, rope-like cord that does not stretch.

Gauge and Checkpoints

Gauge: 16 sc x 18 rows = 4 in (10.2 cm) in sc.

Make the head first and use it as your test piece. After Rnd 4 it should measure 1.75 in (4.4 cm) across. After Rnd 7 it should measure 3 in (7.6 cm).

Shell checkpoints:
– Rnd 5: 2.25 x 3.5 in (5.7 x 8.9 cm)
– Rnd 10: 4.5 x 5.75 in (11.4 x 14.6 cm)
– Rnd 14: 6.25 x 7.5 in (15.9 x 19.1 cm)
– After border: 6.75 x 8 in (17.1 x 20.3 cm)

If your pieces come out too big, go down 0.5 mm in hook size. If they are too small, go up 0.5 mm. Don’t add or remove rounds to fix size, because the pieces are sized to fit each other.

Crocheted character with pale sage-green head, black button eyes, embroidered smile, and darker olive body against soft beige background.

Head (Make 1, Sage)

Work in joined rounds. Ch 1 at the start of each round does not count as a stitch. Join each round with a sl st to the first sc.

  • Rnd 1: Magic ring, 6 sc in ring. (6)
  • Rnd 2: Inc in each st around. (12)
  • Rnd 3: [Sc, inc] 6 times. (18)
  • Rnd 4: [Sc 2, inc] 6 times. (24)
  • Rnd 5: [Sc 3, inc] 6 times. (30)
  • Rnd 6: [Sc 4, inc] 6 times. (36)
  • Rnd 7: [Sc 5, inc] 6 times. (42)

Fasten off, leaving a 12 in (30.5 cm) tail.

Insert the safety eyes between Rnds 4 and 5, 7 stitches apart, just above center. Embroider a small smile with black floss across Rnd 3 below the eyes, centered between them.

Hexagons (Make 7)

The increases are stacked in the same place on every round, which gives the hexagon its corners.

Sage hexagons (make 6):
– Rnd 1: With sage, magic ring, 6 sc in ring. Join. (6)
– Rnd 2: Inc in each st around. Join. (12)
– Rnd 3: [Sc, inc] 6 times. Join. Fasten off sage. (18)
– Rnd 4: Join olive. [Sc 2, inc] 6 times. Join. (24)

Center hexagon (make 1): Work Rnds 1–3 in olive. Work Rnd 4 in olive through the BLO only, which adds a ridged outline. (24)

Each hexagon measures 1.75 in (4.4 cm) across. Fasten off each one, leaving a 12 in (30.5 cm) olive tail.

Flippers (Make 4, Sage)

Both flipper types are small ovals. The final round curves them: slip stitches pull one long edge in, and half double crochets push the other edge out.

Front flippers (make 2):
– Rnd 1: Ch 10. Sc in the 2nd ch from hook and in the next 7 ch, 3 sc in the last ch. Rotate and work along the other side of the chain: sc in the next 7 ch, 2 sc in the same ch as the first sc. Join. (20)
– Rnd 2: Ch 1. 2 sc in the first st, sc in next 7, inc in each of next 3, sc in next 7, inc in each of last 2. Join. (26)
– Rnd 3 (shaping): Ch 1. Sc in first 2, sl st in next 7, inc in each of next 6, hdc in next 7, inc in each of last 4. Join. (36)

Each front flipper measures 3.25 x 1.25 in (8.3 x 3.2 cm).

Back flippers (make 2):
– Rnd 1: Ch 6. Sc in the 2nd ch from hook and in the next 3 ch, 3 sc in the last ch. Along the other side: sc in the next 3 ch, 2 sc in the same ch as the first sc. Join. (12)
– Rnd 2: Ch 1. 2 sc in the first st, sc in next 3, inc in each of next 3, sc in next 3, inc in each of last 2. Join. (18)
– Rnd 3 (shaping): Ch 1. Sc in first 2, sl st in next 3, inc in each of next 6, hdc in next 3, inc in each of last 4. Join. (28)

Each back flipper measures 2 x 1.25 in (5.1 x 3.2 cm). Leave long tails on all flippers for sewing.

Shell (Make 1, Olive)

The shell is an oval with two straight 4-stitch sides and two curved ends. Each round adds 3 stitches at each end, for 6 per round.

End A is split: part of it is at the start of the round and the rest at the end. Ch 1 does not count as a stitch. Join every round with a sl st to the first sc.

  • Rnd 1: Ch 7. Sc in the 2nd ch from hook and in the next 4 ch, 3 sc in the last ch. Along the other side: sc in the next 4 ch, 2 sc in the same ch as the first sc. (14)
  • Rnd 2: 2 sc in the first st, sc in next 4, inc in each of next 3, sc in next 4, inc in each of last 2. (20)
  • Rnd 3: Sc 1, inc, sc in next 4, [sc 1, inc] 3 times, sc in next 4, [sc 1, inc] 2 times. (26)
  • Rnd 4: Sc 2, inc, sc in next 4, [sc 2, inc] 3 times, sc in next 4, [sc 2, inc] 2 times. (32)
  • Rnd 5: Sc 3, inc, sc in next 4, [sc 3, inc] 3 times, sc in next 4, [sc 3, inc] 2 times. (38)

General round n (Rnds 6–14): Sc (n–2), inc, sc in next 4, [sc (n–2), inc] 3 times, sc in next 4, [sc (n–2), inc] 2 times. Total = 6n + 8.

On even rounds, work each repeat as [inc, sc (n–2)]. This shifts the increases away from the previous round’s increases so the ends stay rounded instead of pointed. The count does not change.

Totals for Rnds 6–14: 44, 50, 56, 62, 68, 74, 80, 86, 92.

After Rnd 14 you have 92 stitches: 42 at each end and 4 on each side. Do not fasten off.

Make All Pieces

Quantities per color:
– Olive: 1 shell, 1 center hexagon, Rnd 4 of 6 hexagons, 1 loop
– Sage: 1 head, Rnds 1–3 of 6 hexagons, 4 flippers
– Cream: 1 pocket

Hanging loop (olive): Ch 40, then work a slip-stitch cord back along it. (39 sl st) The cord is about 8.75 in (22.2 cm) long.

Pocket (cream): Worked flat from the rim down.
– Row 1: Ch 26. Sc in the 2nd ch from hook and across. (25)
– Row 2: Ch 1, turn. Sc across. (25)
– Row 3: Ch 1, turn. Sc in the first st, [ch 5, sk 2, sc in next] 8 times. (8 loops)
– Row 4: Turn. Ch 5 (counts as dc + ch 2), sc in the first loop, [ch 5, sc in next loop] 7 times, ch 2, dc in the last sc. (7 loops + 2 half loops)
– Row 5: Ch 1, turn. Sc in the first dc, [ch 5, sc in next loop] 7 times, ch 5, sc in the 3rd ch of the turning ch. (8 loops)
– Rows 6–7: Repeat Rows 4–5.
– Row 8: Turn. Sl st in the first 3 ch of the first loop, ch 1, sc in the same loop, [ch 5, sc in next loop] 7 times. (7 loops)
– Rows 9–11: Repeat Row 8, ending with 6, 5, then 4 loops.

Edging: With RS facing, join cream at one end of the rim. Work around the sides and bottom:
– 1 sc in each rim row-end (2)
– 2 sc in each row-end of Rows 3–7 (10)
– 3 sc in each of the 4 stepped loop edges (12)
– 3 sc in each of the 4 bottom loops (12)
– The second side in reverse: 12 + 10 + 2

That is 24 + 12 + 24 = 60 sc. Fasten off. The pocket measures 6.25 x 4.75 in (15.9 x 12.1 cm).

Placement layout:

              [ LOOP ]
              [ HEAD ]
 [FRONT L]   [ SHELL ]   [FRONT R]
                [S]
             [S]   [S]
                [C]
             [S]   [S]
                [S]
            [==POCKET==]
 [BACK L]               [BACK R]

S = sage hexagon, C = olive center hexagon.

Border (Shell, Olive)

Border gauge: At 18 rounds per 4 in (10.2 cm), each round adds about 0.125 in (0.3 cm) per edge. The two rounds together add 0.25 in (0.6 cm) per edge.

Continue from Rnd 14 with the same yarn:

  • Border Rnd 1 (Rnd 15, BLO): Work the odd-round formula with n = 15: sc 13, inc, sc in next 4, [sc 13, inc] 3 times, sc in next 4, [sc 13, inc] 2 times. (98: 45 per end, 4 per side)
  • Border Rnd 2 (Rnd 16): Work the even-round order with n = 16: inc, sc 14, sc in next 4, [inc, sc 14] 3 times, sc in next 4, [inc, sc 14] 2 times. (104: 48 per end, 4 per side)

Why the math works: A flat sc circle needs about 6 increases per round. In this oval, the two curved ends together make one full circle and the straight sides stay at 4 stitches. Adding 3 increases per end (6 per round) keeps the border flat. Working Border Rnd 1 in the BLO leaves a ridge that sets the band apart visually.

The shell measures 6.25 + 0.5 = 6.75 in (17.1 cm) wide and 7.5 + 0.5 = 8 in (20.3 cm) tall. Fasten off.

Joining

Use whipstitch throughout and match the yarn color at each seam. Pull each stitch snug, but not tight enough to pucker the fabric. Sew one stitch for every edge stitch.

  1. Hexagons: Lay the flower layout on the shell, with the top hexagon 0.75 in (1.9 cm) below the top edge. The flower measures 5.25 in (13.3 cm) across. Pin the pieces. Whipstitch each of the 24 Rnd 4 stitches to the shell fabric directly below it, using the olive tail.
  2. Pocket: Center the rim 3 in (7.6 cm) below the top of the shell. That puts the bottom 0.25 in (0.6 cm) above the lower edge. Sew all 60 edging sc to the shell, one by one. Leave the rim open. The edging is a little longer than the path it covers, and that ease gives the pocket depth.
  3. Head: Overlap 0.75 in (1.9 cm) of the head behind the top edge of the shell. Sew it from the back.
  4. Flippers: Overlap 1 in (2.5 cm) of each flipper behind the shell. Angle the front flippers up by about 30 degrees and the back flippers down by about 30 degrees. Point the slip-stitch (inner) curve of each flipper toward the head.
  5. Loop: Fold the cord in half. Sew both ends 0.75 in (1.9 cm) down the back of the head, 0.5 in (1.3 cm) apart. The loop rises 3.5 in (8.9 cm) above the head.

Size checkpoint: The assembled turtle should measure 10 x 11.5 in (25.4 x 29.2 cm).

Final Blocking

  1. Mist the whole piece lightly with cool water.
  2. Pin the shell to an oval of 6.75 x 8 in (17.1 x 20.3 cm).
  3. Pin the head into a circle 3 in (7.6 cm) across.
  4. Shape the flippers along their curves.
  5. Gently straighten the mesh into even diamonds without stretching it wider than 6.25 in (15.9 cm).
  6. Let it dry completely before removing the pins.

Final Quality-Control Checklist

  • Shell after border: 104 stitches, lying flat with no ruffling
  • All seven hexagons sewn flat, with outlines visible
  • Pocket edging: 60 sc, all sewn down, with the rim open
  • Eyes secure and the smile centered
  • Flippers angled symmetrically
  • Loop firmly anchored through both the head and the shell
  • All ends woven in on the back

Troubleshooting

  • Shell ruffles: Your stitches are loose. Go down a hook size, or check that you are not adding extra increases.
  • Shell cups or curls: Make sure you work 6 increases on every round.
  • Pointed shell ends: You probably skipped the even-round shift. Stagger the increases as written.
  • Hexagons curl: Check that each round has its correct count (6, 12, 18, 24) and give them a firm blocking.
  • Mesh is uneven: Count your chains. Every loop must be exactly ch 5.
  • Pocket sags: Re-sew the edging so every stitch is anchored.

Care

Spot clean or hand wash in cool water and lay flat to dry. Reshape the piece while it is damp.

Crocheted turtle organizer in sage green and cream hanging on a beige wall, holding personal care items in its woven pouch.

Final Notes

The measurements build on each other:
– Gauge: 16 sc = 4 in (10.2 cm)
– Head: 3 in (7.6 cm)
– Shell after Rnd 14: 6.25 x 7.5 in (15.9 x 19.1 cm)
– Shell after border: 6.75 x 8 in (17.1 x 20.3 cm)
– Hexagon flower: 5.25 in (13.3 cm)
– Pocket: 6.25 x 4.75 in (15.9 x 12.1 cm)
– Finished turtle: 10 x 11.5 in (25.4 x 29.2 cm)

If you check each stage as you go, the pieces will fit together.

Happy crocheting!

Leave a Comment