Lavender Blossom Letter L Keychain Crochet Pattern

This little keychain is a soft, padded capital letter L in lavender single crochet, trimmed with a cluster of flowers in one corner. A pink five-petal flower with a yellow center sits low on the stem, near the inside corner. A small white blossom sits just above it, with green leaves on either side and a spray of pink buds running up the stem. A tiny lavender heart charm hangs next to the letter from a gold key ring.

The colors are lavender, pink, white, green, and a touch of yellow. Everything uses US crochet terms. The finished letter is 2.25 in (5.7 cm) wide and 2.75 in (7.0 cm) tall. Before the border, the stem is 1 in (2.5 cm) wide and the foot is 1 in (2.5 cm) tall. It’s sized to clip onto a bag handle, keys, or a zipper pull.

Construction is simple. You crochet two identical flat L layers in rows. Then you stack them, stuff them lightly, and join them with one single crochet round that also forms the border. Next you crochet the appliqués, sew them on, and embroider the buds. Finally you crochet a small heart and attach both pieces to the hardware.

If you want a different initial, the same gauge and edging method will work. This pattern gives exact counts for the L only.

Finished Size and Construction

  • Finished size: 2.25 in (5.7 cm) wide x 2.75 in (7.0 cm) tall
  • Skill level: Easy
  • Terminology: US crochet terms
  • Yarn weight: DK (#3) cotton or cotton blend
  • Hook: 3.0 mm (US C/2 or D/3)
  • Number of pieces: 2 letter layers, 1 large flower, 1 small flower, 2 leaves, 1 heart charm (the buds are embroidered)
  • Layout: one finished letter; the flowers sit at the lower left where the stem meets the foot
  • Layer size: 2 in (5.1 cm) wide x 2.5 in (6.4 cm) tall
  • Size before border: the same as one layer, 2 in x 2.5 in (5.1 x 6.4 cm), since the layers are stacked
  • Border depth: about 0.125 in (0.3 cm) on every edge

Materials

Choose a smooth mercerized or matte cotton in DK weight, about 115 m per 50 g. Cotton gives crisp stitch definition and keeps the letter firm. Avoid fuzzy yarns, because they hide the edge round and blur the small petals.

  • Lavender: 10 g (about 23 m), for both layers, the border, and the heart
  • Pink: 3 g (about 7 m), for the large flower and the bud embroidery
  • White: 2 g (about 5 m), for the small flower
  • Green: 2 g (about 5 m), for the leaves and the bud stem
  • Yellow: 1 g (about 2 m), for the flower centers

Tools:

  • 3.0 mm crochet hook
  • Tapestry needle and a sharp embroidery needle
  • A small pinch of polyester fiberfill
  • Gold split key ring, 1 in (2.5 cm), with a short chain
  • 2 gold jump rings, 0.25 in (0.6 cm), plus one extra short chain for the heart
  • 2 pairs of flat-nose pliers
  • Stitch markers, scissors, and a ruler

All quantities include a margin for swatching and weaving in ends.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • st(s) – stitch(es)
  • MR – magic ring
  • RS – right side

Special stitch – petal: (ch 2, 3 dc, ch 2, sl st) all in the same stitch. This makes one rounded petal.

Gauge and Checkpoints

Gauge: 6 sc and 6 rows = 1 in (2.5 cm) in sc worked flat.

The fabric needs to be tight. Row gauge and stitch gauge are equal, and the border depends on that. Make one letter layer first and measure it before you make the second one.

  • After Row 6 (foot): 2 in (5.1 cm) wide x 1 in (2.5 cm) tall
  • After Row 15 (full layer): 2.5 in (6.4 cm) tall, with a stem 1 in (2.5 cm) wide
  • After the border: 2.25 in (5.7 cm) x 2.75 in (7.0 cm)

If your layer is too big, go down 0.25 mm in hook size. If it is too small or feels stiff, go up 0.25 mm. If only the height is wrong, check your turning chains: ch 1 does not count as a stitch, and you should not work into it.

Crocheted lavender heart with pink flower, white bud, green leaves, and gold chain on neutral background.

Letter Layers (Make 2)

Use lavender. Work in rows, and turn at the end of every row.

Foot

Foundation: Ch 13.

Row 1: Sc in 2nd ch from hook and in each ch across. (12 sc)

Rows 2–6: Ch 1, turn, sc in each st across. (12 sc)

Checkpoint: the foot is 2 in (5.1 cm) x 1 in (2.5 cm).

Stem

Row 7: Ch 1, turn, sc in first 6 sts. Leave the remaining 6 sts unworked. (6 sc)

Rows 8–15: Ch 1, turn, sc in each st across. (6 sc)

Fasten off. Leave a 6 in (15.2 cm) tail on Layer 1 and an 8 in (20.3 cm) tail on Layer 2.

Checkpoint: each layer has 15 rows. It is 2.5 in (6.4 cm) tall overall, and the stem is 9 rows, or 1.5 in (3.8 cm), above the foot.

As worked, the stem rises from the right end of the foot. Flip the layer over so the stem is on the left and the shape reads as an L. Single crochet looks the same on both sides, so this flipped face is your RS. Flip Layer 2 the same way.

Weave in the Layer 1 tail. Keep the Layer 2 tail for stuffing control later, or weave it in too.

Large Pink Flower (Make 1)

Center: With yellow, MR, ch 1, 5 sc in ring, pull the ring closed, sl st to first sc. (5 sc) Fasten off.

Petals: Join pink in any sc. Work 1 petal in the same st and 1 petal in each of the next 4 sts. Sl st to the base of the first petal. (5 petals)

Fasten off and leave a 10 in (25.4 cm) tail for sewing. The flower measures about 0.9 in (2.3 cm) across.

Small White Flower (Make 1)

With white, MR. Work (ch 2, hdc, ch 2, sl st in ring) 5 times, then pull the ring tight. (5 small petals)

Fasten off and leave a sewing tail. With yellow, work one French knot in the center (wrap the needle twice). The flower measures about 0.5 in (1.3 cm) across.

Leaves (Make 2)

With green, ch 6.

Round 1: Working in the chain, start in the 2nd ch from the hook. Sc, hdc, dc, hdc, sc in the last ch. Ch 1 and rotate to work along the other side of the chain. Sc, hdc, dc, hdc, sc, then sl st to the first sc. (10 sts plus 1 tip ch)

Fasten off and leave a sewing tail. Each leaf is about 0.75 in (1.9 cm) long with a pointed tip.

Heart Charm (Make 1)

With lavender, MR. Work (ch 3, 3 tr, 3 dc, ch 1, tr, ch 1, 3 dc, 3 tr, ch 3, sl st) all into the ring. Pull the ring fully closed so the center forms the dip of the heart and the single tr forms the point.

Fasten off and weave in the ends. The heart measures about 0.75 in (1.9 cm) across.

Border and Joining Round

Border gauge: the border is 1 sc per stitch and 1 sc per row end. Since your gauge is 6 sts and 6 rows per inch, a row-end sc covers the same distance as a stitch, so the edge lies flat without ruffling or cupping.

Stack the layers with the RS facing out and all edges matching. Clip them in two places. Each sc of this round goes through both layers.

With lavender, join with a sl st in the first foundation ch of the bottom-left corner. Work counterclockwise with the front layer facing you.

  1. Bottom edge (12 foundation chs): Ch 1, 3 sc in the first ch, 1 sc in each of the next 10 chs, 3 sc in the last ch. (16 sc)
  2. Right edge of foot (6 row ends): 1 sc in each row end, Rows 1–6. (6 sc)
  3. Top of foot (6 unworked sts of Row 6): 3 sc in the outer st, 1 sc in each of the next 5 sts. (8 sc)
  4. Right edge of stem (9 row ends): 1 sc in each row end, Rows 7–15. Add no extra stitches at the inside corner. (9 sc)
  5. Top of stem (6 sts of Row 15): 3 sc in the first st, 1 sc in each of the next 4 sts, 3 sc in the last st. (10 sc)
  6. Left edge (15 row ends): Work 1 sc in each row end down the left side. When you have about 5 row ends left, stuff the letter lightly through the gap. Use a pencil tip to push the fiberfill into the foot and the top of the stem, then finish the side. (15 sc)

Sl st to the first sc. Round total: 64 sc.

Why the math works: the edge has 54 working spots. That’s 12 + 6 + 6 + 9 + 6 + 15 = 54. The 5 outer corners each get 3 sc, which adds 2 extra stitches per corner, so 5 x 2 = 10. 54 + 10 = 64. The inside corner gets no increase because that edge turns inward and needs no extra fabric.

The border adds about 0.125 in (0.3 cm) on every side. So 2 in + 0.25 in = 2.25 in (5.7 cm) wide, and 2.5 in + 0.25 in = 2.75 in (7.0 cm) tall.

Fasten off and hide the tail inside the stuffing.

Appliqué and Embroidery

Pin the pieces to the front before you sew. Use the matching tail and small whipstitches through the front layer only, so the stitches don’t show on the back.

  1. Large pink flower: Center it on the left side of the letter where the stem meets the foot. Let one petal overlap the border slightly.
  2. Leaves: Tuck one leaf under the left edge of the large flower, angled up and outward. Place the second leaf on the right side of the flower, lying on the foot, with its tip pointing up and to the right.
  3. Small white flower: Sew it just above the large flower, slightly to the right, so its petals touch the pink petals.
  4. Bud spray: With green, backstitch a stem about 1 in (2.5 cm) long from the top of the white flower up the center of the stem. Work 3 tiny lazy-daisy leaves along it. With pink, work 5 French knots, wrapped 3 times, along the stem and at its tip to form the buds.

Final Blocking

  1. Lightly mist the letter with water. Don’t soak it, because the fiberfill would take a long time to dry.
  2. Shape it with your fingers on a flat towel. Square the outer corners and press the inside corner into a clean angle.
  3. Check the size: 2.25 in (5.7 cm) x 2.75 in (7.0 cm).
  4. Pin the leaf tips and the outer petals flat, and gently cup the large flower’s petals.
  5. Pin the heart flat with its point sharpened.
  6. Let everything dry completely, about 4–6 hours.
  7. Add the hardware. Open a jump ring with two pliers by twisting it sideways. Pass it through the center of the stem’s top edge, between the 5th and 6th sc of that edge’s 10 border sts, catching both layers. Hook it onto the chain and close it. Use the second jump ring to attach the heart, through the top of its center dip, to its own short chain. Hang both chains from the key ring.

Final Quality-Control Checklist

  • Both layers have 15 rows: 12 sc in Rows 1–6 and 6 sc in Rows 7–15.
  • The border round has exactly 64 sc.
  • Five outer corners each have 3 sc, and the inside corner has none extra.
  • The letter measures 2.25 in (5.7 cm) x 2.75 in (7.0 cm).
  • The stuffing is even, with no lumps and no stuffing showing between stitches.
  • The appliqué stitches don’t show on the back.
  • The jump rings are fully closed with no gap.
  • All ends are woven in or hidden inside.

Troubleshooting

The edge ruffles. Your row gauge is shorter than your stitch gauge. Redo the border and skip 1 row end on each long side, keeping the corner counts the same.

The edge pulls or cups. Your border tension is too tight. Work the border round with a hook 0.25 mm larger.

Stuffing shows through. Use less fiberfill or go down a hook size for the layers.

The heart is lopsided. Count both halves: each side needs 3 tr and 3 dc. Pull the ring closed firmly.

Petals flop forward. Add one tacking stitch at the base of each petal.

The stem leans. Count Row 7: it should have exactly 6 sc, started at the very first stitch.

Care

Spot clean with mild soap and cool water, then press dry in a towel. Don’t machine wash, because the hardware and the stuffing can be damaged.

Cream leather handbag with purple and pink crochet floral keychain on beige linen chair in a bright, minimalist home setting.

Final Notes

The measurements build on each other. A gauge of 6 sc and 6 rows per 1 in (2.5 cm) gives a foot of 2 in x 1 in (5.1 x 2.5 cm). The 9-row stem brings the layer to 2.5 in (6.4 cm) tall and keeps it 1 in (2.5 cm) wide. The 64-stitch joining border adds 0.125 in (0.3 cm) per side, for a finished size of 2.25 in x 2.75 in (5.7 x 7.0 cm). If you check each stage as you go, the finished letter will come out at the right size.

Happy crocheting!

Leave a Comment