Blossom Letter O Keychain Crochet Pattern

This little letter O is a soft, padded keychain charm in powder blue, finished with a small spring bouquet: two cream flowers with sunny yellow centers, pointed green leaves, and tiny yellow berries on slender stems. A separate mini butterfly hangs beside it from a gold key ring, so the charm swings and catches the eye on a tote bag, backpack, or set of keys.

The look is clean and cottage-garden sweet. The letter itself stays plain and smooth in tight single crochet, so the appliqués stand out clearly against it. The colors are light blue, cream, yellow, green, and a touch of medium blue for the butterfly.

This pattern uses US crochet terms. The finished letter measures about 3.75 in (9.5 cm) tall and 2.5 in (6.4 cm) wide, not counting the hardware.

Construction is simple. You work two identical oval rings outward from a chain loop and join them at the inner edge. Then you crochet them together around the outer edge, adding a little stuffing as you go. The small appliqués are made separately and sewn on, and the hardware goes on last.

Finished Size and Construction

  • Finished size: about 3.75 in (9.5 cm) tall x 2.5 in (6.4 cm) wide
  • Skill level: Easy to intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK (light worsted, #3) cotton
  • Hook: 3.0 mm (C/2-D/3)
  • Number of pieces: 1 finished charm (one padded letter made from 2 layers, plus sewn-on appliqués and a small butterfly charm)
  • Layout: single letter O, appliqués on the left side and lower curve
  • Layer size before border: about 2.25 in x 3.5 in (5.7 x 8.9 cm)
  • Border depth: about 1/8 in (0.3 cm) on every side
  • Inner opening: about 1.5 in x 0.5 in (3.8 x 1.3 cm) after stuffing

Materials

Choose a smooth, mercerized or combed DK cotton. Cotton holds the shape of the letter, shows the stitches clearly, and stands up to daily handling on a bag. Avoid fuzzy or very stretchy yarns, which blur the small appliqués.

Yarn (DK cotton, about 115 m per 50 g):

  • Light blue (main color, letter): 12 g, about 28 m
  • Cream (petals, butterfly body): 3 g, about 7 m
  • Green (leaves, stems): 3 g, about 7 m
  • Yellow (flower centers, berries): 2 g, about 5 m
  • Medium blue (butterfly): 2 g, about 5 m

All quantities include a margin for a gauge swatch and sewing tails.

Tools and notions:

  • 3.0 mm (C/2-D/3) crochet hook
  • Small pinch of polyester fiberfill
  • Gold split key ring, 1 in (2.5 cm) diameter
  • 2 gold jump rings, 6 mm
  • Gold chain: one piece 1.5 in (3.8 cm), one piece 1 in (2.5 cm)
  • 2 pairs of flat-nose pliers
  • Tapestry needle
  • 2 stitch markers
  • Scissors and a ruler

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • inc – 2 sc in the same stitch
  • MR – magic ring
  • st(s) – stitch(es)
  • rnd(s) – round(s)

Special technique – joining sc through two layers: Hold both layers wrong sides together with the edges lined up. Insert the hook through the matching stitch on the front layer, then straight through the matching stitch on the back layer, and work the sc as usual.

Gauge and Checkpoints

Gauge: 12 sc x 12 rnds = 2 in (5.1 cm) in tight single crochet with a 3.0 mm hook.

Make one layer first and measure it before starting the second. The stitches should be firm enough that stuffing won’t show through.

Checkpoints:

  • After Rnd 3: about 1.3 in x 2.5 in (3.3 x 6.4 cm)
  • After Rnd 6: about 2.25 in x 3.5 in (5.7 x 8.9 cm)
  • After border: about 2.5 in x 3.75 in (6.4 x 9.5 cm)

If your layer is too big, go down to a 2.75 mm hook. If it is too small, go up to a 3.25 mm hook. If the curved ends ruffle, you are working them too loosely; if they cup, your increases are too tight. Change the hook rather than the stitch counts, because the counts are what keep the oval flat.

Light blue crocheted oval keychain embellished with white flowers, yellow details, green leaves, and butterfly charm on a gold ring.

Letter Layers (Make 2)

With light blue, work in joined rounds. Each round has four sections: Side A (straight), End 1 (curve), Side B (straight), End 2 (curve). The straight sides stay at 7 sts in every round. Each curved end gains 3 sts per round, which is the half-circle version of the standard 6-increase flat circle.

Foundation: Ch 20. Without twisting the chain, sl st into the first ch to form a loop. Think of the loop as ch 1–7 (Side A), ch 8–10 (End 1), ch 11–17 (Side B), ch 18–20 (End 2).

Rnd 1: Ch 1. Sc in each of the next 7 ch (Side A); 2 sc in each of the next 3 ch (End 1, 6 sts); sc in each of the next 7 ch (Side B); 2 sc in each of the last 3 ch (End 2, 6 sts). Sl st to first sc. (26 sts: 7 + 6 + 7 + 6)

Place a marker in the first st of End 1 and End 2, and move the markers up each round.

Rnd 2: Ch 1. Sc 7; (sc 1, inc) 3 times; sc 7; (sc 1, inc) 3 times. Sl st to first sc. (32 sts: 7 + 9 + 7 + 9)

Rnd 3: Ch 1. Sc 7; (sc 2, inc) 3 times; sc 7; (sc 2, inc) 3 times. Sl st to first sc. (38 sts: 7 + 12 + 7 + 12)

Rnd 4: Ch 1. Sc 7; (sc 3, inc) 3 times; sc 7; (sc 3, inc) 3 times. Sl st to first sc. (44 sts: 7 + 15 + 7 + 15)

Rnd 5: Ch 1. Sc 7; (sc 4, inc) 3 times; sc 7; (sc 4, inc) 3 times. Sl st to first sc. (50 sts: 7 + 18 + 7 + 18)

Rnd 6: Ch 1. Sc 7; (sc 5, inc) 3 times; sc 7; (sc 5, inc) 3 times. Sl st to first sc. (56 sts: 7 + 21 + 7 + 21)

Fasten off the first layer with a short tail. Don’t fasten off the second layer; put the working loop on a marker for the border.

Lay both layers flat and compare them. They should match within 1/8 in (0.3 cm).

Appliqués

Large flower (make 1): With yellow, MR, 5 sc in ring, pull closed, sl st to first sc. Fasten off. Join cream in any sc. In each sc around: (sl st, ch 2, 2 dc, ch 2, sl st). (5 petals) Fasten off. About 1 in (2.5 cm) across.

Small flower (make 1): Work as for the large flower, but make each petal (sl st, ch 1, 2 hdc, ch 1, sl st). (5 petals) About 0.8 in (2.0 cm) across.

Leaf (make 5): With green, ch 6. Sc in 2nd ch from hook, hdc in next ch, dc in next ch, hdc in next ch, sc in last ch. (5 sts) Ch 1 for the tip, then work along the other side of the chain: sc, hdc, dc, hdc, sc. (5 sts) Sl st into the first sc. Fasten off with a long tail. About 0.8 in (2.0 cm) long. Use the tail to backstitch a center vein from base to tip.

Berry (make 6): With yellow, MR, 6 sc in ring. Pull very tight so the ring cups into a small ball, and sl st to first sc. Fasten off with a long tail. About 0.25 in (0.6 cm) across.

Butterfly (make 1): With medium blue, MR. Make an upper wing: (ch 3, 3 tr, ch 3, sl st into ring). Make a lower wing: (ch 2, 3 dc, ch 2, sl st into ring). Repeat both wings once more. (4 wings) Pull the ring closed and fasten off. With cream, wrap the center 6 times vertically to form the body, then make 2 short straight stitches at the top for antennae. About 1 in (2.5 cm) wide.

Border

The border does two jobs at once: it joins the two layers and it rounds off the outer edge.

Border gauge: The joining round is worked at the same 6 sts per inch (2.5 cm) as the layers. Squeezing two layers together makes it only about 1/8 in (0.3 cm) deep.

Inner edge first: Hold the layers wrong sides together with the foundation loops lined up. With light blue, sl st through both layers into each of the 20 remaining foundation chain loops. (20 sl sts: 7 + 3 + 7 + 3) Fasten off and weave in.

Outer border round: Pick up the working loop of the second layer. Ch 1. Working through both layers with the joining sc technique:

  • Side A: sc 7 (7 sts)
  • End 1: (sc 6, inc) 3 times (24 sts)
  • Side B: sc 7 (7 sts)
  • End 2: (sc 6, inc) 3 times (24 sts)

Before closing End 2, use the back of your hook to push a small, even layer of fiberfill between the layers. Aim for a soft, pillowy feel, not a firm one. Sl st to first sc. (62 sts: 56 worked one per stitch + 6 added)

Fasten off and weave the tail inside the padding.

Why the math works: Each layer ends with 56 sts (7 + 21 + 7 + 21). The border works 1 sc in each of those 56 sts and adds exactly 3 increases at each curved end, the same rate as every earlier round. The straight sides stay at 7 sts, so they stay straight. The 6 added stitches bring the total to 62, and the edge lies flat instead of cupping.

Assembly

Place the letter face up with End 1 at the top.

  1. Sew on the 5 leaves first, with their bases pointing inward: 2 on the upper left side, 1 at the middle left, and 2 along the lower right curve.
  2. With a single strand of green, backstitch two stems: one from the upper flower area curving up toward the top left, and one along the lower right curve.
  3. Sew the small flower on the left side, about one-third of the way down from the top, overlapping the bases of the upper leaves.
  4. Sew the large flower low on the left curve, overlapping the leaf bases there.
  5. Sew 3 berries at the end of the upper stem and 3 along the lower stem.
  6. Open a jump ring, pass it through the center top border st of End 1, add the 1.5 in (3.8 cm) chain, and close it.
  7. Use the second jump ring to attach the top of the butterfly to the 1 in (2.5 cm) chain.
  8. Thread the free ends of both chains onto the split key ring.

Final Blocking

  1. Lay the finished letter face down on a folded towel.
  2. Hold a steam iron 1 in (2.5 cm) above the back. Never press down on the stuffing.
  3. While the piece is still warm, ease the outer edge into a smooth oval with your fingers.
  4. Check the size: about 2.5 in x 3.75 in (6.4 x 9.5 cm).
  5. Turn the letter face up and gently shape the petals and leaf tips.
  6. Let the piece cool and dry completely before hanging it.

Final Quality-Control Checklist

  • Each layer has 56 sts after Rnd 6.
  • The border has exactly 62 sts and no gaps between the layers.
  • The inner edge has 20 sl sts and lies smooth.
  • The letter measures about 2.5 in x 3.75 in (6.4 x 9.5 cm).
  • The stuffing is even and doesn’t show through the stitches.
  • Every appliqué is sewn down at several points, with no loose petals.
  • The jump rings are fully closed.
  • All tails are woven in and trimmed.

Troubleshooting

The ends cup into a bowl. Your increases are too tight, or you missed one. Count each end section and go up a hook size.

The ends ruffle. You have too many increases or loose tension. Recount and go down a hook size.

The straight sides bow outward. You worked extra sts on the sides. Each side must stay at 7 sts in every round.

The layers don’t line up. One layer has an extra round. Compare stitch counts and redo the layer that doesn’t match.

Stuffing peeks through. Use less fiberfill and tighten your tension.

The berries are loose and open. Pull the magic ring tighter and sew through the center twice.

The charm spins on its chain. Attach the jump ring exactly at the center top st.

Care

Spot clean with mild soap and cool water, press out the moisture with a towel, and air dry flat. Don’t machine wash it, because the washer can damage the stuffing and the metal hardware.

Natural tote bag with crocheted blue charm featuring white daisies and butterfly details hangs on weathered garden bench in sunlight.

Final Notes

The measurements build in a simple chain. A 20-ch loop sets the inner opening. Six rounds that keep 7-st sides and add 3 sts per curved end give a 56-st layer of about 2.25 in x 3.5 in (5.7 x 8.9 cm). A 62-st joining border adds about 1/8 in (0.3 cm) all around, for a finished letter of about 2.5 in x 3.75 in (6.4 x 9.5 cm). Check your gauge on the first layer, and the rest follows.

Once the base letter is done, the bouquet is where you can play. Try different flower colors, or swap the butterfly for a bee.

Happy crocheting!

Leave a Comment