This hanging holder has three small round baskets in deep burgundy, stacked one above the other on two long straps that loop over a wooden ring. Each basket has a solid round base, a short solid band, an open diamond-mesh wall and a pink scalloped rim. Six blush-pink five-petal flowers are sewn onto the mesh of each basket.
There are three colors: burgundy for the structure, rose pink for the rims and flower centers, and pale blush for the petals. The look is cottage-style and a little vintage. It works well in a bathroom, where each basket holds one standard roll.
The pattern uses US crochet terms. Each basket is 5 in (12.7 cm) across and 4 in (10.2 cm) tall. Measured from the top of the ring, the finished holder is about 27 in (68.6 cm) long.
Each basket is crocheted in the round as one piece. You start with a flat double crochet base and finish with a two-round rim. The flowers are made separately and sewn onto the mesh. Two flat single crochet straps fold over a wooden ring and are sewn down the sides of all three baskets.
Finished Size and Construction
- Basket size: 5 in (12.7 cm) diameter x 4 in (10.2 cm) tall
- Overall hanging length: about 27 in (68.6 cm) from the top of the ring to the bottom of the lowest basket
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: Medium / worsted (#4) cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 23 crocheted pieces (3 baskets, 18 flowers, 2 straps) plus 1 wooden ring
- Layout: 3 baskets in one vertical column, 2 in (5.1 cm) apart
- Wall height before rim: 3 in (7.6 cm)
- Rim (border) depth: 1 in (2.5 cm)
- Flower size: 1.75 in (4.4 cm) across
Materials
Use a smooth, firm worsted-weight cotton or cotton blend. Cotton keeps the basket shape, copes well with bathroom humidity and shows the petals clearly. Avoid very stretchy acrylic, because the baskets have to carry weight.
If you substitute a yarn, choose one labeled around 1.5 m per gram (roughly 165 yd per 100 g). Before you buy enough for the whole project, swatch it to check that it meets the gauge below.
- Burgundy: 130 g / about 200 m (219 yd) for bases, walls and straps
- Rose pink: 30 g / about 45 m (49 yd) for rims and flower centers
- Pale blush: 40 g / about 60 m (66 yd) for flower petals
These quantities include a margin of about 15% for gauge differences and a test swatch.
Tools
- 4.5 mm (US 7) crochet hook
- Wooden ring, 3 in (7.6 cm) diameter
- Wall hook with screw and anchor
- Tapestry needle
- 8 stitch markers
- Scissors and measuring tape
- Rustproof pins for blocking
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- BLO: back loop only
- MR: magic ring
- st(s): stitch(es)
- rep: repeat
Special stitches
- Scallop: 5 dc in the same st.
- Petal: (ch 2, 3 dc, ch 2, sl st) all in the same st.
Gauge and Checkpoints
Gauge: 15 sc x 17 rows = 4 in (10.2 cm); 15 dc x 8 rows = 4 in (10.2 cm).
Make one complete basket before starting the others. It serves as your gauge swatch and shows the real size. Measure on a flat surface and don’t stretch the fabric. Measure across the full diameter of the base, not along the curve.
- After Round 1: base is 1 in (2.5 cm) across.
- After Round 3: base is 3 in (7.6 cm) across.
- After Round 5: base is 5 in (12.7 cm) across and lies flat.
- After Round 8: solid band is 0.75 in (1.9 cm) tall.
- After Round 12: wall is 2.75 in (7.0 cm) tall.
- After Round 13: wall is 3 in (7.6 cm) tall.
- After Round 15: basket is 4 in (10.2 cm) tall, and the 60-st circumference measures 16 in (40.6 cm).
If the basket is too big, change to a 4 mm (US G/6) hook. If it is too small, change to a 5 mm (US H/8) hook. A standard roll is about 4.5 in (11.4 cm) across, so the base must be at least 5 in (12.7 cm) wide. If the base ruffles, your dc are too loose; if it cups, they are too tight. Fix the base before you start the wall.

Basket (Make 3)
Base
Work in joined rounds with burgundy. The beginning ch 3 counts as a dc.
Round 1: MR, ch 3, 11 dc in ring, sl st in top of ch 3. (12 dc)
Round 2: Ch 3, dc in same st, 2 dc in each st around, sl st to join. (24 dc)
Round 3: Ch 3, dc in same st, dc in next st, 2 dc in next st, dc in next st; rep from * around, sl st to join. (36 dc)
Round 4: Ch 3, dc in same st, dc in next 2 sts, 2 dc in next st, dc in next 2 sts; rep from * around, sl st to join. (48 dc)
Round 5: Ch 3, dc in same st, dc in next 3 sts, 2 dc in next st, dc in next 3 sts; rep from * around, sl st to join. (60 dc)
Check that the base is 5 in (12.7 cm) across.
Solid Band
Round 6 (turning round): Ch 1, sc in BLO of each st around, sl st in first sc. (60 sc) The unused front loops form a neat ridge, and the wall starts to turn upward.
Rounds 7–8: Ch 1, sc in each st around, sl st in first sc. (60 sc)
Place markers in st 1 and st 31. These mark where the straps will go.
Diamond Mesh Wall
Round 9: Ch 1, sc in first st, ch 5, skip 4 sts, sc in next st; rep from * 10 more times, ch 5, skip last 4 sts, sl st in first sc. (12 ch-5 loops)
Round 10: Sl st in each of first 3 ch, ch 1, sc in same loop, ch 5, sc in next ch-5 loop; rep from * 10 more times, ch 5, sl st in first sc. (12 ch-5 loops)
Rounds 11–12: Rep Round 10. (12 ch-5 loops in each round)
Each sc goes into the middle of a loop from the round below, so the loops form diamonds. Each mesh round adds about 0.5 in (1.3 cm). Keep all chains the same tension so the diamonds stay even.
Round 13: Ch 1, 5 sc in each ch-5 loop around, sl st in first sc. (60 sc: 12 loops x 5 sc) Fasten off burgundy.
This round brings the count back to the 60 sts of the band. Move your markers up to st 1 and st 31 of this round.
Rim
Round 14: Join rose pink with a sl st in marked st 1. Ch 1, sc in each st around, sl st in first sc. (60 sc)
Round 15: Ch 1, sc in each of next 2 sts, skip 1 st, Scallop in next st, skip 1 st; rep from * around, sl st in first sc. (12 scallops; 84 sts: 24 sc + 60 dc) Fasten off and weave in the ends.
Flower (Make 18)
Round 1: With rose pink, MR, ch 1, 5 sc in ring, sl st in first sc. (5 sc) Fasten off.
Round 2: Join pale blush with a sl st in any sc. Petal in next sc; rep from * 4 more times, with the last Petal going into the sc where you joined. (5 petals, 15 dc) Fasten off, leaving a 10 in (25.4 cm) tail for sewing.
Each flower is 1.75 in (4.4 cm) across. Pinch each petal tip into a soft point.
Make All Pieces
- Baskets: 3, in burgundy with rose pink rims
- Flowers: 18, with rose pink centers and pale blush petals (6 per basket)
- Straps: 2, in burgundy
Strap (make 2): With burgundy, ch 97.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (96 sc)
Rows 2–3: Ch 1, sc in each st across, turn. (96 sc)
Fasten off. Each strap is 25.5 in (64.8 cm) long and about 0.75 in (1.9 cm) wide. Strap length: 1.5 in (3.8 cm) ring fold + 8 in (20.3 cm) drop + three 4 in (10.2 cm) baskets + two 2 in (5.1 cm) gaps = 25.5 in (64.8 cm).
Layout (top to bottom):
[ wooden ring ]
/ \
strap A strap B <- 8 in (20.3 cm) drop
[ basket 1 : 5 in wide x 4 in tall ]
| 2 in (5.1 cm) gap |
[ basket 2 : 5 in wide x 4 in tall ]
| 2 in (5.1 cm) gap |
[ basket 3 : 5 in wide x 4 in tall ]
Joining
Flowers to baskets. Round 11 has 12 sc, one at each mesh intersection. Number them 1 to 12, starting with the sc nearest marker 1. Center a flower over sc 2, 4, 6, 8, 10 and 12. That gives three flowers on each half of the basket and leaves the strap positions clear. Use the blush tail to sew the rose center to the mesh, then tack each petal tip to the nearest chain with one small stitch. Work from the inside so the stitches stay hidden.
Straps to ring. Fold the top 1.5 in (3.8 cm) of each strap over the ring and whipstitch it to itself through all three rows. Set the two straps side by side on the ring so the load is shared evenly.
Straps to baskets. Measure 8 in (20.3 cm) down from the bottom of the ring. Line up the top of basket 1’s rim at that point, with strap A over marker st 1 and strap B over marker st 31. Each strap is 3 rows wide and covers about 3 wall sts, so center it on the marked st with 1 st on each side. Whipstitch both long edges of the strap to the burgundy band (Rounds 6–8) and to Round 13. Tack the middle of the strap once to a Round 11 sc so it doesn’t bow away from the mesh.
Leave a 2 in (5.1 cm) gap, then attach basket 2 the same way, then basket 3. The bottom end of each strap should line up with the lower edge of basket 3’s base. If there is any extra length, fold it under the base and stitch it down.
Tension: Sew firmly enough that nothing shifts, but don’t pull the stitches tight. Tight seams pucker the mesh and tilt the basket.
Size checkpoint: Hang the piece from the ring. Each gap should be 2 in (5.1 cm), every basket should hang level, and the total length should be about 27 in (68.6 cm).
Border
The rim (Rounds 14–15) is the border on each basket. It is worked at the main gauge: 15 sc = 4 in (10.2 cm).
Round 14: 60 sc, worked 1 sc into each of the 60 sts of Round 13, with no stitches added. The two strap markers divide it into 2 halves of 30 sc each.
Round 15: Each repeat uses 5 sts (2 sc, skip 1, Scallop, skip 1), so 60 ÷ 5 = 12 scallops, 6 on each half. The round has 84 sts in total: 24 sc + 60 dc (12 scallops x 5 dc).
Why the math works: Each of the 12 mesh loops takes 5 sc in Round 13, which gives 60 sts. The scallop repeat is also 5 sts, so one scallop sits above each mesh loop. The markers at st 1 and st 31 are 30 sts apart, and 30 is divisible by 5. Both markers land on the first sc of a pair, so both straps sit between scallops and the two halves match. The rim adds 1 in (2.5 cm) to the 3 in (7.6 cm) wall, for a finished height of 4 in (10.2 cm).
Final Blocking
- Before attaching the straps, wet each basket and flower in cool water, then press out the water in a towel.
- Slide each basket over a jar or cardboard tube 5 in (12.7 cm) wide, wrapped in plastic.
- Smooth the mesh until the diamonds are even, and pin each scallop so it opens outward.
- Lay the flowers flat, shape the five petals and pin each tip.
- Leave everything to dry completely, about 24 hours.
- Steam the straps flat, easing them to 25.5 in (64.8 cm).
- Join the pieces only after everything is dry.
Final Quality-Control Checklist
- Each base is 5 in (12.7 cm) across and lies flat.
- Every mesh round has 12 loops.
- Rounds 13 and 14 have 60 sts each.
- Each rim has 12 even scallops.
- Each basket has six flowers, three on each half.
- The straps sit between scallops, directly opposite each other.
- The gaps are 2 in (5.1 cm) and the total length is about 27 in (68.6 cm).
- All ends are woven in on the inside.
Troubleshooting
- Base ruffles: Use a smaller hook, or redo Round 5 with firmer dc.
- Base cups: Use a larger hook for Rounds 4–5.
- Mesh drifts or slants: Start each round by slip stitching across 3 ch to the middle of the loop, never into the next loop.
- Wrong count in Round 13: Check that there are 12 loops and 5 sc in each.
- Scallops crowd or gape: Recount Round 14. It must be exactly 60 sc.
- Basket tilts: Make sure both straps are the same length and sewn at matching rounds.
- Roll doesn’t fit: Recheck the base checkpoint and remake the base with a larger hook.
- Straps stretch under weight: Use a firmer cotton or a smaller hook for the straps.
- Flowers curl: Block them flat again and tack all five petal tips.
Care
Hand wash in cool water and dry flat, reshaping the baskets over a jar. Don’t tumble dry, because heat can shrink cotton and flatten the scallops.

Final Notes
Each measurement builds on the one before. The base reaches 5 in (12.7 cm) at 60 dc. The band keeps those 60 sts. The mesh adds height while staying at 12 loops. Round 13 returns to 60 sc at 3 in (7.6 cm), and the 12-scallop rim brings each basket to 4 in (10.2 cm). Three baskets, an 8 in (20.3 cm) drop and two 2 in (5.1 cm) gaps give the 27 in (68.6 cm) holder. If every checkpoint matches, the finished piece will hang straight and level.
Happy crocheting!