Cranberry Checker Christmas Tree Ornament Crochet Pattern

This little tree is a flat ornament made in one piece. Its outline steps in three tiers. The body is a checkerboard of small square blocks in deep cranberry red, where smooth squares alternate with softly ridged squares. A tan trunk sits centered under the widest tier, and a cream corded edge outlines the whole shape.

The colors are classic and cozy: cranberry, warm cream and light tan, with a cranberry hanging loop at the tip. It looks at home on a real tree, on top of a wrapped gift, or hung from a door knob.

This pattern uses US crochet terms. The finished ornament measures 5.9 in (15.0 cm) wide by 6.9 in (17.5 cm) tall, not counting the hanging loop.

Construction is simple. You work the tree body flat in rows of single crochet from the bottom tier up, shaping each tier in full 3-stitch steps. You work the trunk down from the foundation chain. A two-round border and a hanging loop finish the piece.

Finished Size and Construction

  • Finished size: 5.9 in (15.0 cm) wide x 6.9 in (17.5 cm) tall, plus a 1.5 in (3.8 cm) loop
  • Skill level: Easy-Intermediate
  • Terminology: US
  • Yarn weight: DK (#3)
  • Hook: 3.5 mm (E/4)
  • Number of pieces: 1 (the body, trunk, border and loop are all worked onto one piece)
  • Layout: a single tree on its own, with no joining
  • Body size: 5.4 in (13.7 cm) wide x 5.4 in (13.7 cm) tall
  • Size before border (body + trunk): 5.4 in (13.7 cm) wide x 6.4 in (16.3 cm) tall
  • Border depth: 0.25 in (0.6 cm) on every edge

Materials

Choose a smooth DK cotton or cotton blend so the ridges and the cream cord show clearly. Acrylic DK also works, but it blocks a little softer. These amounts assume about 225 m per 100 g.

  • Cranberry (Color A): 10 g, about 23 m (body and hanging loop)
  • Cream (Color B): 6 g, about 14 m (border)
  • Tan (Color C): 3 g, about 7 m (trunk)

These amounts include extra yarn for checking gauge and weaving in ends.

Tools:

  • 3.5 mm (E/4) crochet hook
  • Tapestry needle
  • 2 stitch markers
  • Scissors
  • Blocking mat, rust-proof pins and a spray bottle

Abbreviations (US Terms)

  • ch – chain
  • sc – single crochet
  • sl st – slip stitch
  • st(s) – stitch(es)
  • BLO / FLO – back loop only / front loop only
  • fsc – foundation single crochet
  • rdg – ridge single crochet (see below)
  • rev sc – reverse single crochet (crab stitch)
  • RS / WS – right side / wrong side
  • rep – repeat

Special stitches

Ridge sc (rdg): On RS rows, sc in the BLO. On WS rows, sc in the FLO. Either way, the unused loop stays on the RS, so the ridged squares always face the front.

Block A: sc in each of the next 3 sts (smooth square).

Block B: rdg in each of the next 3 sts (ridged square).

Fsc extension: Insert your hook under the 2 strands at the base of the last st made. Yarn over (yo), pull up a loop, yo and draw through 1 loop (this makes the base chain). Then yo and draw through both loops. For the next fsc, insert your hook into the base chain of the fsc you just made.

Rev sc: Work from left to right (if you are right-handed). Insert your hook into the next st to the right, yo, pull up a loop, yo and draw through both loops.

Gauge and Checkpoints

Gauge: 20 sc and 20 rows = 4 in (10.2 cm), worked in rows of sc.

Your gauge must be square. Every border count assumes that 1 sc per stitch and 1 sc per row end will lie flat. That only works when 5 sts and 5 rows both measure 1 in (2.5 cm).

Because this is a single piece, the first part of the tree is your test piece. Work Rows 1-3, then measure before you go on.

Checkpoints:

  • After Row 3: 27 sts = 5.4 in (13.7 cm) wide; 3 rows = 0.6 in (1.5 cm) tall
  • One block (3 sts x 3 rows) = 0.6 in (1.5 cm) square
  • After Row 9: body height 1.8 in (4.6 cm)
  • After Row 18: body height 3.6 in (9.1 cm)
  • After Row 27: body height 5.4 in (13.7 cm)
  • After the trunk: total height 6.4 in (16.3 cm)
  • After the border: 5.9 in (15.0 cm) x 6.9 in (17.5 cm)

If your work is too big: go down 0.25 mm in hook size and start again. If it is too small: go up 0.25 mm. If the width is right but your rows are too tall, pull the working yarn snug before each yo. Don’t fix gauge by changing stitch counts. The tier steps and the border math both depend on having 27 sts across.

Crocheted Christmas tree ornament with deep burgundy textured body, cream border, suspended by maroon cord against rustic wooden backdrop.

Tree Body

Use Color A. The turning ch 1 does not count as a stitch. Odd-numbered rows are RS rows, and even-numbered rows are WS rows.

Every row is a run of blocks that starts and ends with Block A: [A, B] repeated, then one last A. Each tier step moves the edge by exactly one block, so this rule keeps the checkerboard lined up from row to row without a chart.

Tier 1 (Rows 1-9)

Row 1 (RS): Ch 28, sc in 2nd ch from hook and in each ch across. In this row, work all 9 blocks as plain sc, because the chain has no separate loops. (27 sc)

Row 2 (WS): Ch 1, turn. *Block A, Block B; rep from * 3 more times, Block A. (27 sts: 5 A blocks, 4 B blocks)

Row 3 (RS): Ch 1, turn. Rep the Row 2 pattern. (27 sts)

Row 4 (WS): Turn, sl st in first 3 sts, ch 1. *Block A, Block B; rep from * 2 more times, Block A. Leave last 3 sts unworked. (21 sts)

Rows 5-6: Ch 1, turn. *A, B; rep from * 2 more times, A. (21 sts)

Row 7 (RS): Turn, sl st in first 3 sts, ch 1. *A, B; rep from * once more, A. Leave last 3 sts unworked. (15 sts)

Rows 8-9: Ch 1, turn. *A, B; rep from * once more, A. (15 sts)

Checkpoint: each side of the tier is a 3-step staircase, and the tier is 1.8 in (4.6 cm) tall.

Tier 2 (Rows 10-18)

Row 10 (WS, increase row): Ch 4, turn. Sc in 2nd ch from hook and in next 2 ch (new Block A). Over the 15 existing sts, work B, A, B, A, B. Work 3 fsc extensions off the last st (new Block A). (21 sts: 3 new + 15 + 3 new)

Each side now sticks out by one block, which makes the first tier notch.

Rows 11-12: Ch 1, turn. *A, B; rep from * 2 more times, A. (21 sts)

Row 13 (RS): Turn, sl st in first 3 sts, ch 1. *A, B; rep from * once more, A. Leave last 3 sts unworked. (15 sts)

Rows 14-15: Ch 1, turn. Work the same pattern. (15 sts)

Row 16 (WS): Turn, sl st in first 3 sts, ch 1. A, B, A. Leave last 3 sts unworked. (9 sts)

Rows 17-18: Ch 1, turn. A, B, A. (9 sts)

Tier 3 (Rows 19-27)

Row 19 (RS, increase row): Ch 4, turn. Sc in 2nd ch from hook and in next 2 ch (Block A). Over the 9 existing sts, work B, A, B. Work 3 fsc extensions (Block A). (15 sts: 3 + 9 + 3)

Rows 20-21: Ch 1, turn. *A, B; rep from * once more, A. (15 sts)

Row 22 (WS): Turn, sl st in first 3 sts, ch 1. A, B, A. Leave last 3 sts unworked. (9 sts)

Rows 23-24: Ch 1, turn. A, B, A. (9 sts)

Row 25 (RS): Turn, sl st in first 3 sts, ch 1. Block A. Leave last 3 sts unworked. (3 sts)

Rows 26-27: Ch 1, turn. Block A. (3 sts) Fasten off.

Stitch check: the body has 3 x (27 + 21 + 15 + 21 + 15 + 9 + 15 + 9 + 3) = 405 sts in total. The base is 5.4 in (13.7 cm) wide. The widest row of Tier 2 is 4.2 in (10.7 cm), the widest row of Tier 3 is 3.0 in (7.6 cm), and the tip is 0.6 in (1.5 cm).

Trunk

Turn the body upside down so the foundation chain is on top. Count the free loops: 10 loops, then 7 trunk loops, then 10 loops. Place a marker in the 11th loop and another in the 17th loop.

Row 1: Join Color C with sc in the 11th loop, then sc in the next 6 loops. (7 sc)

Rows 2-5: Ch 1, turn, sc in each st across. (7 sc)

Fasten off. The trunk measures 1.4 in (3.6 cm) wide x 1.0 in (2.5 cm) tall. Weave in all ends now, before you start the border.

Border

Border gauge: Work 1 sc per stitch along every horizontal edge and 1 sc per row end along every vertical edge. Because your gauge is square (5 sts = 5 rows = 1 in / 2.5 cm), these sc lie flat. Each outer corner gets 2 sc in the corner stitch. Inner corners get no extra sc.

Why the math works: each long side has 27 row ends and 8 horizontal edges of 3 sts each. That gives 27 + (8 x 3) = 51 stitches to work into, plus 1 extra sc at each of the 8 outer corners, for 59 sc per side.

Rnd 1 (RS): With the RS facing, join Color B with sc in the center st of Row 27.

  • Tip: 2 sc in the corner st of Row 27. (3 sc so far)
  • First side (59 sc): Work 3 sc down each 3-row section (9 sections = 27 sc). There are 8 horizontal edges: 6 ledges, plus the undersides of the 2 increase-row extensions. On each one, work 1 sc in each of the 3 sts, but put 2 sc in the outer-corner st (4 sc per edge = 32 sc). Where a ledge has sl sts on it, work into the sl sts. (62 sc so far)
  • Bottom (41 sc): 2 sc in the outer-corner foundation loop, then 1 sc in each of the next 9 loops (11). Work 5 sc down the side of the trunk. Then work 2 sc in the first trunk st, 1 sc in each of the next 5 sts and 2 sc in the last st (9). Work 5 sc up the other side of the trunk. Then 1 sc in each of the next 9 foundation loops and 2 sc in the corner loop (11). (103 sc so far)
  • Second side (59 sc): Work the same as the first side, in mirror image. (162 sc so far)
  • Tip: 2 sc in the remaining corner st of Row 27. Sl st to first sc. (164 sc)

Checkpoint: 1 (starting sc) + 2 (tip) + 59 + 41 + 59 + 2 (tip) = 164 sc. The tip has 5 sc over its 3 sts.

Rnd 2: Ch 1, do not turn. Rev sc in each sc around. Sl st to first st. (164 rev sc)

Fasten off. The rev sc rolls over the top of Rnd 1 to make the twisted cream cord. Together, the two rounds add 0.25 in (0.6 cm) to every edge.

Hanging Loop

Join Color A with a sl st in the rev sc above the center st of the tip. Ch 16, then sl st in the same st. Sl st in each of the 16 ch, then sl st in the base st again. Fasten off. The loop stands 1.5 in (3.8 cm) tall.

Final Blocking

  1. Weave in any remaining ends through stitches of the same color.
  2. Lay the tree RS up on a blocking mat.
  3. Pin the base so it is 5.4 in (13.7 cm) across inside the border and 5.9 in (15.0 cm) across including the border.
  4. Pin the height to 6.9 in (17.5 cm), from the tip to the bottom of the trunk.
  5. Pin each outer tier corner so the steps sit square.
  6. Mist evenly until damp, not soaked.
  7. Let it dry completely, for at least 6 hours.
  8. Unpin, then press the loop flat with your fingers.

Final Quality-Control Checklist

  • The body is 27 sts at the base and narrows to 3 sts at the tip
  • Every row starts and ends with a smooth Block A
  • The ridged and smooth squares form a neat checkerboard, lined up in columns
  • Both tier notches stick out exactly one block on each side
  • The trunk is centered, with 10 free loops on each side
  • Rnd 1 has 164 sc, and Rnd 2 has 164 rev sc
  • The border lies flat, with no ruffling or cupping
  • The finished size is 5.9 in (15.0 cm) x 6.9 in (17.5 cm)
  • The loop is centered on the tip and firmly attached

Troubleshooting

The ridges show on the back, not the front. You used BLO on a WS row. On WS rows, rdg is always worked in the FLO.

The checkerboard doesn’t line up. A row didn’t start with Block A, or a decrease row skipped 2 or 4 sts instead of 3. Recount the sl sts.

The tier notches look shallow. The ch 4 or the fsc extensions were worked too tight. Keep them as loose as your regular sc.

The border ruffles. You have more rows per inch than stitches per inch. Work Rnd 1 with a hook 0.5 mm smaller and keep the same counts.

The border cups or pulls in. You have fewer rows per inch than stitches per inch. Work Rnd 1 with a hook 0.5 mm larger, and check that you didn’t skip any row ends.

The trunk is off-center. Recount the foundation loops. There should be exactly 10 on each side of the 7 trunk loops.

The rev sc looks lumpy. Pull each loop up to the height of Rnd 1 before you finish the stitch.

Care

Hand wash in cool water with mild soap, press the water out in a towel and dry flat. Pin the corners again if the steps relax over time.

Crocheted burgundy and cream Christmas tree ornament hanging on an evergreen branch with golden lights and festive decorations.

Final Notes

The measurements build on each other and are easy to check. The gauge is 20 sc and 20 rows = 4 in (10.2 cm), so one block is 0.6 in (1.5 cm). Nine blocks make a 5.4 in (13.7 cm) base, and nine rows of blocks make a 5.4 in (13.7 cm) body. The 1.0 in (2.5 cm) trunk brings the height to 6.4 in (16.3 cm). The 0.25 in (0.6 cm) border brings the finished ornament to 5.9 in (15.0 cm) x 6.9 in (17.5 cm).

Check your gauge at Row 3 and count your stitches in every tier, and the rest will fall into place. Make one for every branch, or tie one onto a gift.

Happy crocheting!

Leave a Comment